From: "lei,yao" <lei.a.yao@intel.com>
To: dts@dpdk.org
Cc: lei yao <lei.a.yao@intel.com>
Subject: [dts] [PATCH V2] test: add vhost/virtio pvp performance test based on qemu
Date: Wed, 21 Dec 2016 16:27:49 +0800 [thread overview]
Message-ID: <1482308869-9080-1-git-send-email-lei.a.yao@intel.com> (raw)
From: lei yao <lei.a.yao@intel.com>
The test case include 3 part:
1. virtio 0.95 performance test
virtio0.95 is the default version for qemu. Vector, normal, mergeable path will be tested on this version
2. Test vector performance on virtio 1.0.
Signed-off-by: lei yao <lei.a.yao@intel.com>
---
tests/TestSuite_vhost_qemu_pvp_performance.py | 311 ++++++++++++++++++++++++++
1 file changed, 311 insertions(+)
create mode 100644 tests/TestSuite_vhost_qemu_pvp_performance.py
diff --git a/tests/TestSuite_vhost_qemu_pvp_performance.py b/tests/TestSuite_vhost_qemu_pvp_performance.py
new file mode 100644
index 0000000..32f5c56
--- /dev/null
+++ b/tests/TestSuite_vhost_qemu_pvp_performance.py
@@ -0,0 +1,311 @@
+# BSD LICENSE
+#
+# Copyright(c) 2010-2015 Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+"""
+DPDK Test suite.
+
+Vhost PVP performance using Qemu test suite.
+"""
+import os
+import re
+import time
+import utils
+from scapy.utils import wrpcap, rdpcap
+from test_case import TestCase
+from exception import VerifyFailure
+from settings import HEADER_SIZE
+from etgen import IxiaPacketGenerator
+from qemu_kvm import QEMUKvm
+
+
+class TestVhostUserOneCopyOneVm(TestCase):
+
+ def set_up_all(self):
+ # Get and verify the ports
+ self.dut_ports = self.dut.get_ports()
+ self.verify(len(self.dut_ports) >= 1, "Insufficient ports for testing")
+
+ # Get the port's socket
+ self.pf = self.dut_ports[0]
+ netdev = self.dut.ports_info[self.pf]['port']
+ self.socket = netdev.get_nic_socket()
+ self.cores = self.dut.get_core_list("1S/3C/1T", socket=self.socket)
+
+ # Set the params of vhost sample
+ self.vhost_app = "./examples/vhost/build/vhost-switch"
+ self.vm2vm = 0
+ # This parameter is used to define mergeable on/off
+ self.jumbo = 0
+
+ # Using file to save the vhost sample output since in jumboframe case,
+ # there will be lots of output
+ self.vhost_test = self.vhost_app + \
+ " -c %s -n %d --socket-mem 2048,2048 -- -p 0x1 --mergeable %d" + \
+ " --vm2vm %d --socket-file ./vhost-net > ./vhost.out &"
+ # build the vhost sample in vhost-user mode.
+ if self.nic in ['niantic']:
+ self.dut.send_expect(
+ "sed -i -e 's/#define MAX_QUEUES.*$/#define MAX_QUEUES 128/' "
+ "./examples/vhost/main.c",
+ "#", 10)
+ elif self.nic.startswith('fortville'):
+ self.dut.send_expect(
+ "sed -i -e 's/#define MAX_QUEUES.*$/#define MAX_QUEUES 512/' "
+ "./examples/vhost/main.c",
+ "#", 10)
+ out = self.dut.send_expect("make -C examples/vhost", "#")
+ self.verify("Error" not in out, "compilation error")
+ self.verify("No such file" not in out, "Not found file error")
+
+ self.virtio1 = "eth1"
+ self.virtio1_mac = "52:54:00:00:00:01"
+ self.src1 = "192.168.4.1"
+ self.dst1 = "192.168.3.1"
+ self.vm_dut = None
+
+ self.number_of_ports = 1
+ self.header_row = ["FrameSize(B)", "Throughput(Mpps)", "LineRate(%)", "Cycle"]
+ self.memory_channel = 4
+ # Specify the path of Qemu binary for different Qemu versions, user can modify this as necessary
+ self.qemu_path = ["/home/lei/qemu_install/qemu_2.5/bin/qemu-system-x86_64",
+ "/home/lei/qemu_install/qemu_2.6/bin/qemu-system-x86_64",
+ "/home/lei/qemu_install/qemu_2.7/bin/qemu-system-x86_64"]
+
+ def set_up(self):
+ #
+ # Run before each test case.
+ #
+ # Launch vhost sample using default params
+ #
+ self.dut.send_expect("rm -rf ./vhost.out", "#")
+ self.dut.send_expect("rm -rf ./vhost-net*", "#")
+ self.dut.send_expect("killall -s INT vhost-switch", "#")
+ self.dut.send_expect("killall -s INT qemu-system-x86_64", "#")
+
+ self.frame_sizes = [64, 128, 256, 512, 1024, 1500]
+ self.vm_testpmd_vector = "./x86_64-native-linuxapp-gcc/app/testpmd -c 0x3 -n 3" \
+ + " -- -i --txqflags=0xf01 --disable-hw-vlan-filter"
+ self.vm_testpmd_normal = "./x86_64-native-linuxapp-gcc/app/testpmd -c 0x3 -n 3" \
+ + " -- -i --txqflags=0xf00 --disable-hw-vlan-filter"
+
+ def launch_vhost_sample(self):
+ #
+ # Launch the vhost sample with different parameters
+ #
+ self.coremask = utils.create_mask(self.cores)
+ self.vhostapp_testcmd = self.vhost_test % (
+ self.coremask, self.memory_channel, self.jumbo, self.vm2vm)
+ self.dut.send_expect(self.vhostapp_testcmd, "# ", 40)
+ time.sleep(30)
+ try:
+ self.logger.info("Launch vhost sample:")
+ self.dut.session.copy_file_from(self.dut.base_dir + "vhost.out")
+ fp = open('./vhost.out', 'r')
+ out = fp.read()
+ fp.close()
+ if "Error" in out:
+ raise Exception("Launch vhost sample failed")
+ else:
+ self.logger.info("Launch vhost sample finished")
+ except Exception as e:
+ self.logger.error("ERROR: Failed to launch vhost sample: %s" % str(e))
+
+ def start_onevm(self, path="", modem=0):
+ #
+ # Start One VM with one virtio device
+ #
+
+ self.vm = QEMUKvm(self.dut, 'vm0', 'vhost_sample')
+ if(path != ""):
+ self.vm.set_qemu_emulator(path)
+ vm_params = {}
+ vm_params['driver'] = 'vhost-user'
+ vm_params['opt_path'] = './vhost-net'
+ vm_params['opt_mac'] = self.virtio1_mac
+ if(modem == 1):
+ vm_params['opt_settings'] = 'disable-modern=false'
+ self.vm.set_vm_device(**vm_params)
+
+ try:
+ self.vm_dut = self.vm.start()
+ if self.vm_dut is None:
+ raise Exception("Set up VM ENV failed")
+ except Exception as e:
+ self.logger.error("ERROR: Failure for %s" % str(e))
+
+ return True
+
+ def vm_testpmd_start(self):
+ #
+ # Start testpmd in vm
+ #
+ if self.vm_dut is not None:
+ self.vm_dut.send_expect(self.vm_testpmd_vector, "testpmd>", 20)
+ self.vm_dut.send_expect("start tx_first", "testpmd>")
+
+ def send_verify(self, case, frame_sizes, vlan_id1=0, tag="Performance"):
+ self.result_table_create(self.header_row)
+ for frame_size in frame_sizes:
+ info = "Running test %s, and %d frame size." % (case, frame_size)
+ self.logger.info(info)
+ payload = frame_size - HEADER_SIZE['eth'] - HEADER_SIZE['ip']
+ flow1 = '[Ether(dst="%s")/Dot1Q(vlan=%s)/IP(src="%s",dst="%s")/("X"*%d)]' % (
+ self.virtio1_mac, vlan_id1, self.src1, self.dst1, payload)
+ self.tester.scapy_append('wrpcap("flow1.pcap", %s)' % flow1)
+ self.tester.scapy_execute()
+
+ tgenInput = []
+ port = self.tester.get_local_port(self.pf)
+ tgenInput.append((port, port, "flow1.pcap"))
+
+ _, pps = self.tester.traffic_generator_throughput(tgenInput, delay=30)
+ Mpps = pps / 1000000.0
+ pct = Mpps * 100 / float(self.wirespeed(self.nic, frame_size,
+ self.number_of_ports))
+ data_row = [frame_size, str(Mpps), str(pct), tag]
+ self.result_table_add(data_row)
+ self.result_table_print()
+
+ def test_perf_pvp_qemu_vector_pmd(self):
+ #
+ # Test the pvp performance for vector path
+ #
+ # start testpmd on VM
+ self.jumbo = 0
+ self.launch_vhost_sample()
+ self.start_onevm()
+
+ self.vm_dut.send_expect(self.vm_testpmd_vector, "testpmd>", 20)
+ self.vm_dut.send_expect("start tx_first", "testpmd>")
+ time.sleep(5)
+ vlan_id1 = 1000
+ self.send_verify(self.running_case, self.frame_sizes, vlan_id1, "Virtio 0.95 Vector Performance")
+ self.vm_dut.kill_all()
+
+ def test_perf_pvp_qemu_normal_pmd(self):
+ #
+ # Test the performance for normal path
+ #
+ # start testpmd on VM
+ self.jumbo = 0
+ self.launch_vhost_sample()
+ self.start_onevm()
+ # Start testpmd with user
+ self.vm_dut.send_expect(self.vm_testpmd_normal, "testpmd>", 20)
+ self.vm_dut.send_expect("start tx_first", "testpmd>")
+
+ time.sleep(5)
+ vlan_id1 = 1000
+ self.send_verify(self.running_case, self.frame_sizes, vlan_id1, "Virtio 0.95 Normal Performance")
+ self.vm_dut.kill_all()
+
+ def test_perf_pvp_qemu_mergeable_pmd(self):
+ #
+ # Test the performance for mergeable path
+ #
+ # start testpmd on VM
+ self.jumbo = 1
+ self.launch_vhost_sample()
+ self.start_onevm()
+ # Start testpmd with user
+ self.vm_dut.send_expect(self.vm_testpmd_vector, "testpmd>", 20)
+ self.vm_dut.send_expect("start tx_first", "testpmd>")
+
+ time.sleep(5)
+ vlan_id1 = 1000
+ self.send_verify(self.running_case, self.frame_sizes, vlan_id1, "Virtio 0.95 Mergeable Performance")
+ self.vm_dut.kill_all()
+
+ def test_perf_virtio_modern_qemu_vector_pmd(self):
+ #
+ # Test the vhost/virtio pvp performance for virtio1.0
+ #
+ #
+ # start testpmd on VM
+ self.jumbo = 0
+ self.launch_vhost_sample()
+ self.start_onevm("", 1)
+ # Start testpmd with user
+ self.vm_dut.send_expect(self.vm_testpmd_vector, "testpmd>", 20)
+ self.vm_dut.send_expect("start tx_first", "testpmd>")
+
+ time.sleep(5)
+ vlan_id1 = 1000
+ self.send_verify(self.running_case, self.frame_sizes, vlan_id1, "virtio1.0, Vector")
+ self.vm_dut.kill_all()
+
+ def test_perf_virtio_modern_qemu_normal_pmd(self):
+ #
+ # Test the performance of one vm with 2virtio devices in legacy fwd
+ #
+ # start testpmd on VM
+ self.jumbo = 0
+ self.launch_vhost_sample()
+ self.start_onevm("", 1)
+ # Start testpmd with user
+ self.vm_dut.send_expect(self.vm_testpmd_normal, "testpmd>", 20)
+ self.vm_dut.send_expect("start tx_first", "testpmd>")
+
+ time.sleep(5)
+ vlan_id1 = 1000
+ self.send_verify(self.running_case, self.frame_sizes, vlan_id1, "virtio1.0, Normal")
+ self.vm_dut.kill_all()
+
+ def test_perf_virtio_modern_qemu_mergeable_pmd(self):
+ #
+ # Test the performance of one vm with 2virtio devices in legacy fwd
+ #
+ # start testpmd on VM
+ self.jumbo = 1
+ self.launch_vhost_sample()
+ self.start_onevm("", 1)
+ # Start testpmd with user
+ self.vm_dut.send_expect(self.vm_testpmd_vector, "testpmd>", 20)
+ self.vm_dut.send_expect("start tx_first", "testpmd>")
+
+ time.sleep(5)
+ vlan_id1 = 1000
+ self.send_verify(self.running_case, self.frame_sizes, vlan_id1, "virtio1.0, Mergeable")
+ self.vm_dut.kill_all()
+
+ def tear_down(self):
+ #
+ # Run after each test case.
+ # Clear vhost-switch and qemu to avoid blocking the following TCs
+ #
+ self.vm.stop()
+ time.sleep(2)
+
+ def tear_down_all(self):
+ """
+ Run after each test suite.
+ """
+ pass
--
2.7.4
next reply other threads:[~2016-12-21 8:26 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-21 8:27 lei,yao [this message]
2016-12-21 8:43 ` Liu, Yong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1482308869-9080-1-git-send-email-lei.a.yao@intel.com \
--to=lei.a.yao@intel.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).