From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mga11.intel.com (mga11.intel.com [192.55.52.93]) by dpdk.org (Postfix) with ESMTP id 492A014EC for ; Tue, 17 Jan 2017 10:01:13 +0100 (CET) Received: from fmsmga001.fm.intel.com ([10.253.24.23]) by fmsmga102.fm.intel.com with ESMTP; 17 Jan 2017 01:01:12 -0800 X-ExtLoop1: 1 X-IronPort-AV: E=Sophos;i="5.33,243,1477983600"; d="scan'208";a="1095099860" Received: from unknown (HELO dpdk-fedora20.icx.intel.com) ([10.240.176.135]) by fmsmga001.fm.intel.com with ESMTP; 17 Jan 2017 01:01:12 -0800 From: "xu,huilong" To: dts@dpdk.org Cc: "xu,huilong" Date: Tue, 17 Jan 2017 17:02:15 +0800 Message-Id: <1484643736-48250-1-git-send-email-huilongx.xu@intel.com> X-Mailer: git-send-email 1.9.3 Subject: [dts] [patch V1 1/2] add fdir test case X-BeenThere: dts@dpdk.org X-Mailman-Version: 2.1.15 Precedence: list List-Id: test suite reviews and discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 17 Jan 2017 09:01:15 -0000 Expand Flow Director for fortville to support ipv4 TOS, ipv4 PROTO, ipv4 TTL and ipv6 tc, ipv6 next-header, ipv6 hop-limits and ivlan Signed-off-by: xu,huilong --- test_plans/fdir_test_plan.rst | 364 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 364 insertions(+) diff --git a/test_plans/fdir_test_plan.rst b/test_plans/fdir_test_plan.rst index 95a2926..5913a52 100644 --- a/test_plans/fdir_test_plan.rst +++ b/test_plans/fdir_test_plan.rst @@ -684,3 +684,367 @@ and then to 0x0017. The packets should still match the filter::: PKT_RX_PKT_RX_FDIR PKT_RX_IP_CKSUM PKT_RX_IPV4_HDR + + +Test Case : test with ipv4 TOS, PROTO, TTL +=========================================== + +1) start testpmd and initialize flow director flex payload configuration:: + + ./testpmd -c fffff -n 4 -- -i --disable-rss --pkt-filter-mode=perfect --rxq=8 --txq=8 --nb-cores=8 + testpmd> port stop 0 + testpmd> flow_director_flex_payload 0 l2 (0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15) + testpmd> flow_director_flex_payload 0 l3 (0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15) + testpmd> flow_director_flex_payload 0 l4 (0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15) + testpmd> flow_director_flex_mask 0 flow all (0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff) + testpmd> port start 0 + testpmd> set verbose 1 + testpmd> set fwd rxonly + testpmd> start + +Note:: + assume FLEXBYTES = "0x11,0x11,0x22,0x22,0x33,0x33,0x44,0x44,0x55,0x55,0x66,0x66,0x77,0x77,0x88,0x88" + assume payload = "\x11\x11\x22\x22\x33\x33\x44\x44\x55\x55\x66\x66\x77\x77\x88\x88" + +2) setup the fdir input set of IPv4:: + + testpmd> set_fdir_input_set 0 ipv4-other none select + testpmd> set_fdir_input_set 0 ipv4-other src-ipv4 add + testpmd> set_fdir_input_set 0 ipv4-other dst-ipv4 add + +3) add ipv4-tos to fdir input set, set tos to 16 and 8:: + + testpmd> set_fdir_input_set 0 ipv4-other ipv4-tos add + setup flow director filter rules, + +rule_1:: + flow_director_filter 0 mode IP add flow ipv4-other src 192.168.1.1 dst 192.168.1.2 tos 16 proto 255 ttl 255 vlan 0 \ + flexbytes (FLEXBYTES) fwd pf queue 1 fd_id 1 + +rule_2:: + flow_director_filter 0 mode IP add flow ipv4-other src 192.168.1.1 dst 192.168.1.2 tos 8 proto 255 ttl 255 vlan 0 \ + flexbytes (FLEXBYTES) fwd pf queue 2 fd_id 2 + +send packet to DUT, + +packet_1:: + 'sendp([Ether(dst="%s")/IP(src="192.168.0.1", dst="192.168.0.2", tos=16, proto=255, ttl=255)/Raw(%s)], iface="%s")'\ + %(dst_mac, payload, itf) + +packet_1 should be received by queue 1. + +packet_2:: + 'sendp([Ether(dst="%s")/IP(src="192.168.0.1", dst="192.168.0.2", tos=8, proto=255, ttl=255)/Raw(%s)], iface="%s")'\ + %(dst_mac, payload, itf) + +packet_2 should be received by queue 2. + +delete rule_1, send packet_1 again, packet_1 should be received by queue 0. +delete rule_2, send packet_2 again, packet_2 should be received by queue 0. + +4) add ipv4-proto to fdir input set, set proto to 253 and 254:: + + testpmd> set_fdir_input_set 0 ipv4-other ipv4-proto add + +setup flow director filter rules +rule_3:: + flow_director_filter 0 mode IP add flow ipv4-other src 192.168.1.1 dst 192.168.1.2 tos 16 proto 253 ttl 255 vlan 0 \ + flexbytes (FLEXBYTES) fwd pf queue 3 fd_id 3 + +rule_4:: + flow_director_filter 0 mode IP add flow ipv4-other src 192.168.1.1 dst 192.168.1.2 tos 8 proto 254 ttl 255 vlan 0 \ + flexbytes (FLEXBYTES) fwd pf queue 4 fd_id 4 + +send packet to DUT, + +packet_3:: + 'sendp([Ether(dst="%s")/IP(src="192.168.0.1", dst="192.168.0.2", tos=16, proto=253, ttl=255)/Raw(%s)], iface="%s")'\ + %(dst_mac, payload, itf) + +packet_3 should be received by queue 3. + +packet_4:: + 'sendp([Ether(dst="%s")/IP(src="192.168.0.1", dst="192.168.0.2", tos=8, proto=254, ttl=255)/Raw(%s)], iface="%s")'\ + %(dst_mac, payload, itf) + +packet_4 should be received by queue 4. + +delete rule_3, send packet_3 again, packet_3 should be received by queue 0. +delete rule_4, send packet_4 again, packet_4 should be received by queue 0. + +5) test ipv4-ttl, set ttl to 32 and 64:: + + testpmd> set_fdir_input_set 0 ipv4-other ipv4-ttl add + +setup flow director filter rules, +rule_5:: + flow_director_filter 0 mode IP add flow ipv4-other src 192.168.1.1 dst 192.168.1.2 tos 16 proto 253 ttl 32 vlan 0 \ + flexbytes (FLEXBYTES) fwd pf queue 5 fd_id 5 + +rule_6:: + flow_director_filter 0 mode IP add flow ipv4-other src 192.168.1.1 dst 192.168.1.2 tos 8 proto 254 ttl 64 vlan 0 \ + flexbytes (FLEXBYTES) fwd pf queue 6 fd_id 6 + +send packet to DUT, + +packet_5:: + 'sendp([Ether(dst="%s")/IP(src="192.168.0.1", dst="192.168.0.2", tos=16, proto=253, ttl=32)/Raw(%s)], iface="%s")'\ + %(dst_mac, payload, itf) + +packet_5 should be received by queue 5. + +packet_6:: + 'sendp([Ether(dst="%s")/IP(src="192.168.0.1", dst="192.168.0.2", tos=8, proto=254, ttl=64)/Raw(%s)], iface="%s")'\ + %(dst_mac, payload, itf) + +packet_6 should be received by queue 6. + +delete rule_5, send packet_5 again, packet_5 should be received by queue 0. +delete rule_6, send packet_6 again, packet_6 should be received by queue 0. + +6) removed all entry of fdir:: + + testpmd>flush_flow_director 0 + testpmd>show port fdir 0 + +example:: + + flow_director_filter 0 mode IP add flow ipv4-other src 192.168.1.1 dst 192.168.1.2 tos 16 proto 255 ttl 255 vlan 0 flexbytes (0x11,0x11,0x22,0x22,0x33,0x33,0x44,0x44,0x55,0x55,0x66,0x66,0x77,0x77,0x88,0x88) fwd pf queue 1 fd_id 1 + + flow_director_filter 0 mode IP add flow ipv4-other src 192.168.1.1 dst 192.168.1.2 tos 8 proto 255 ttl 255 vlan 0 flexbytes (0x11,0x11,0x22,0x22,0x33,0x33,0x44,0x44,0x55,0x55,0x66,0x66,0x77,0x77,0x88,0x88) fwd pf queue 2 fd_id 2 + + sendp([Ether(src="00:00:00:00:00:01", dst="00:00:00:00:01:00")/IP(src="192.168.1.1", dst="192.168.1.2", tos=16, proto=255, ttl=255)/Raw(load="\x11\x11\x22\x22\x33\x33\x44\x44\x55\x55\x66\x66\x77\x77\x88\x88")], iface="ens260f0") + + sendp([Ether(src="00:00:00:00:00:01", dst="00:00:00:00:01:00")/IP(src="192.168.1.1", dst="192.168.1.2", tos=8, proto=255, ttl=255)/Raw(load="\x11\x11\x22\x22\x33\x33\x44\x44\x55\x55\x66\x66\x77\x77\x88\x88")], iface="ens260f0") + +Test Case: test with ipv6 tc, next-header, hop-limits +======================================================= +1) start testpmd and initialize flow director flex payload configuration:: + + ./testpmd -c fffff -n 4 -- -i --disable-rss --pkt-filter-mode=perfect --rxq=8 --txq=8 --nb-cores=8 + testpmd> port stop 0 + testpmd> flow_director_flex_payload 0 l2 (0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15) + testpmd> flow_director_flex_payload 0 l3 (0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15) + testpmd> flow_director_flex_payload 0 l4 (0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15) + testpmd> flow_director_flex_mask 0 flow all (0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff) + testpmd> port start 0 + testpmd> set verbose 1 + testpmd> set fwd rxonly + testpmd> start + +Note:: + assume FLEXBYTES = "0x11,0x11,0x22,0x22,0x33,0x33,0x44,0x44,0x55,0x55,0x66,0x66,0x77,0x77,0x88,0x88" + assume payload = "\x11\x11\x22\x22\x33\x33\x44\x44\x55\x55\x66\x66\x77\x77\x88\x88" + +2) setup the fdir input set of IPv6:: + + testpmd> set_fdir_input_set 0 ipv6-other none select + testpmd> set_fdir_input_set 0 ipv6-other src-ipv6 add + testpmd> set_fdir_input_set 0 ipv6-other dst-ipv6 add + +3) add ipv6-tc to fdir input set, set tc to 16 and 8:: + + testpmd> set_fdir_input_set 0 ipv6-other ipv6-tc add + +setup flow director filter rules, + +rule_1:: + flow_director_filter 0 mode IP add flow ipv6-other src 2000::1 dst 2000::2 tos 16 proto 255 ttl 64 vlan 0 \ + flexbytes (FLEXBYTES) fwd pf queue 1 fd_id 1 + +rule_2:: + flow_director_filter 0 mode IP add flow ipv6-other src 2000::1 dst 2000::2 tos 8 proto 255 ttl 64 vlan 0 \ + flexbytes (FLEXBYTES) fwd pf queue 2 fd_id 2 + +send packet to DUT, + +packet_1:: + 'sendp([Ether(dst="%s")/IPv6(src="2000::1", dst="2000::2", tc=16, nh=255, hlim=64)/Raw(%s)], iface="%s")' \ + %(dst_mac, payload, itf) + +packet_1 should be received by queue 1. + +packet_2:: + 'sendp([Ether(dst="%s")/IPv6(src="2000::1", dst="2000::2", tc=8, nh=255, hlim=64)/Raw(%s)], iface="%s")' \ + %(dst_mac, payload, itf) + +packet_2 should be received by queue 2. + +delete rule_1, send packet_1 again, packet_1 should be received by queue 0. +delete rule_2, send packet_2 again, packet_2 should be received by queue 0. + +4) add ipv6-next-header to fdir input set, set nh to 253 and 254:: + + testpmd> set_fdir_input_set 0 ipv6-other ipv6-next-header add + +setup flow director filter rules, +rule_3:: + flow_director_filter 0 mode IP add flow ipv6-other src 2000::1 dst 2000::2 tos 16 proto 253 ttl 255 vlan 0 \ + flexbytes (FLEXBYTES) fwd pf queue 3 fd_id 3 + +rule_4:: + flow_director_filter 0 mode IP add flow ipv6-other src 2000::1 dst 2000::2 tos 8 proto 254 ttl 255 vlan 0 \ + flexbytes (FLEXBYTES) fwd pf queue 4 fd_id 4 + +send packet to DUT, + +packet_3:: + 'sendp([Ether(dst="%s")/IPv6(src="2000::1", dst="2000::2", tc=16, nh=253, hlim=64)/Raw(%s)], iface="%s")'\ + %(dst_mac, payload, itf) + +packet_3 should be received by queue 3. + +packet_4:: + 'sendp([Ether(dst="%s")/IPv6(src="2000::1", dst="2000::2", tc=8, nh=254, hlim=64)/Raw(%s)], iface="%s")'\ + %(dst_mac, payload, itf) + +packet_4 should be received by queue 4. + +delete rule_3, send packet_3 again, packet_3 should be received by queue 0. +delete rule_4, send packet_4 again, packet_4 should be received by queue 0. + +5) add ipv6-hop-limits to fdir input set, set hlim to 32 and 64:: + + testpmd> set_fdir_input_set 0 ipv6-other ipv6-hop-limits add + +setup flow director filter rules, +rule_5:: + flow_director_filter 0 mode IP add flow ipv6-other src 2000::1 dst 2000::2 tos 16 proto 253 ttl 32 vlan 0 \ + flexbytes (FLEXBYTES) fwd pf queue 5 fd_id 5 + +rule_6:: + flow_director_filter 0 mode IP add flow ipv6-other src 2000::1 dst 2000::2 tos 8 proto 254 ttl 64 vlan 0 \ + flexbytes (FLEXBYTES) fwd pf queue 6 fd_id 6 + +send packet to DUT, + +packet_5:: + 'sendp([Ether(dst="%s")/IPv6(src="2000::1", dst="2000::2", tc=16, nh=253, hlim=32)/Raw(%s)], iface="%s")'\ + %(dst_mac, payload, itf) + +packet_5 should be received by queue 5. + +packet_6:: + 'sendp([Ether(dst="%s")/IPv6(src="2000::1", dst="2000::2", tc=8, nh=254, hlim=64)/Raw(%s)], iface="%s")'\ + %(dst_mac, payload, itf) + +packet_6 should be received by queue 6. + +delete rule_5, send packet_5 again, packet_5 should be received by queue 0. +delete rule_6, send packet_6 again, packet_6 should be received by queue 0. + +6) removed all entry of fdir:: + + testpmd>flush_flow_director 0 + testpmd>show port fdir 0 + +example:: + + flow_director_filter 0 mode IP add flow ipv6-other src 2000::1 dst 2000::2 tos 16 proto 255 ttl 64 vlan 0 flexbytes (0x11,0x11,0x22,0x22,0x33,0x33,0x44,0x44,0x55,0x55,0x66,0x66,0x77,0x77,0x88,0x88) fwd pf queue 1 fd_id 1 + + flow_director_filter 0 mode IP add flow ipv6-other src 2000::1 dst 2000::2 tos 8 proto 255 ttl 64 vlan 0 flexbytes (0x11,0x11,0x22,0x22,0x33,0x33,0x44,0x44,0x55,0x55,0x66,0x66,0x77,0x77,0x88,0x88) fwd pf queue 2 fd_id 2 + + flow_director_filter 0 mode IP add flow ipv6-other src 2000::1 dst 2000::2 tos 16 proto 253 ttl 64 vlan 0 flexbytes (0x11,0x11,0x22,0x22,0x33,0x33,0x44,0x44,0x55,0x55,0x66,0x66,0x77,0x77,0x88,0x88) fwd pf queue 3 fd_id 3 + + flow_director_filter 0 mode IP add flow ipv6-other src 2000::1 dst 2000::2 tos 8 proto 254 ttl 64 vlan 0 flexbytes (0x11,0x11,0x22,0x22,0x33,0x33,0x44,0x44,0x55,0x55,0x66,0x66,0x77,0x77,0x88,0x88) fwd pf queue 4 fd_id 4 + + flow_director_filter 0 mode IP add flow ipv6-other src 2000::1 dst 2000::2 tos 16 proto 253 ttl 32 vlan 0 flexbytes (0x11,0x11,0x22,0x22,0x33,0x33,0x44,0x44,0x55,0x55,0x66,0x66,0x77,0x77,0x88,0x88) fwd pf queue 5 fd_id 5 + + flow_director_filter 0 mode IP add flow ipv6-other src 2000::1 dst 2000::2 tos 8 proto 254 ttl 48 vlan 0 flexbytes (0x11,0x11,0x22,0x22,0x33,0x33,0x44,0x44,0x55,0x55,0x66,0x66,0x77,0x77,0x88,0x88) fwd pf queue 6 fd_id 6 + + sendp([Ether(src="00:00:00:00:00:01", dst="00:00:00:00:01:00")/IPv6(src="2000::1", dst="2000::2", tc=16, nh=255, hlim=64)/Raw(load="\x11\x11\x22\x22\x33\x33\x44\x44\x55\x55\x66\x66\x77\x77\x88\x88")], iface="ens260f0") + + sendp([Ether(src="00:00:00:00:00:01", dst="00:00:00:00:01:00")/IPv6(src="2000::1", dst="2000::2", tc=8, nh=255, hlim=64)/Raw(load="\x11\x11\x22\x22\x33\x33\x44\x44\x55\x55\x66\x66\x77\x77\x88\x88")], iface="ens260f0") + + sendp([Ether(src="00:00:00:00:00:01", dst="00:00:00:00:01:00")/IPv6(src="2000::1", dst="2000::2", tc=16, nh=253, hlim=64)/Raw(load="\x11\x11\x22\x22\x33\x33\x44\x44\x55\x55\x66\x66\x77\x77\x88\x88")], iface="ens260f0") + + sendp([Ether(src="00:00:00:00:00:01", dst="00:00:00:00:01:00")/IPv6(src="2000::1", dst="2000::2", tc=8, nh=254, hlim=64)/Raw(load="\x11\x11\x22\x22\x33\x33\x44\x44\x55\x55\x66\x66\x77\x77\x88\x88")], iface="ens260f0") + + sendp([Ether(src="00:00:00:00:00:01", dst="00:00:00:00:01:00")/IPv6(src="2000::1", dst="2000::2", tc=16, nh=253, hlim=32)/Raw(load="\x11\x11\x22\x22\x33\x33\x44\x44\x55\x55\x66\x66\x77\x77\x88\x88")], iface="ens260f0") + + sendp([Ether(src="00:00:00:00:00:01", dst="00:00:00:00:01:00")/IPv6(src="2000::1", dst="2000::2", tc=8, nh=254, hlim=48)/Raw(load="\x11\x11\x22\x22\x33\x33\x44\x44\x55\x55\x66\x66\x77\x77\x88\x88")], iface="ens260f0") + + +Test Case: test with ivlan (qinq not work) +============================ +1) start testpmd and initialize flow director flex payload configuration:: + + ./testpmd -c fffff -n 4 -- -i --disable-rss --pkt-filter-mode=perfect --rxq=8 --txq=8 --nb-cores=8 + testpmd> port stop 0 + testpmd> flow_director_flex_payload 0 l2 (0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15) + testpmd> flow_director_flex_payload 0 l3 (0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15) + testpmd> flow_director_flex_payload 0 l4 (0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15) + testpmd> flow_director_flex_mask 0 flow all (0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff) + testpmd> port start 0 + + testpmd> vlan set qinq on 0 + + testpmd> set verbose 1 + testpmd> set fwd rxonly + testpmd> start + +Note:: + assume FLEXBYTES = "0x11,0x11,0x22,0x22,0x33,0x33,0x44,0x44,0x55,0x55,0x66,0x66,0x77,0x77,0x88,0x88" + assume payload = "\x11\x11\x22\x22\x33\x33\x44\x44\x55\x55\x66\x66\x77\x77\x88\x88" + +2) setup the fdir input set:: + + testpmd> set_fdir_input_set 0 ipv4-udp none select + testpmd> set_fdir_input_set 0 ipv4-udp ivlan add + + +3) setup flow director filter rules, + +rule_1:: + flow_director_filter 0 mode IP add flow ipv4-udp src 192.168.1.1 1021 dst 192.168.1.2 1022 tos 16 ttl 255 \ + vlan 1 flexbytes (FLEXBYTES) fwd pf queue 1 fd_id 1 + +rule_2:: + flow_director_filter 0 mode IP add flow ipv4-udp src 192.168.1.1 1021 dst 192.168.1.2 1022 tos 16 ttl 255 \ + vlan 15 flexbytes (FLEXBYTES) fwd pf queue 2 fd_id 2 + +rule_3:: + flow_director_filter 0 mode IP add flow ipv4-udp src 192.168.1.1 1021 dst 192.168.1.2 1022 tos 16 ttl 255 \ + vlan 255 flexbytes (FLEXBYTES) fwd pf queue 3 fd_id 3 + +rule_4:: + flow_director_filter 0 mode IP add flow ipv4-udp src 192.168.1.1 1021 dst 192.168.1.2 1022 tos 16 ttl 255 \ + vlan 4095 flexbytes (FLEXBYTES) fwd pf queue 4 fd_id 4 + +4) send packet to DUT, + +packet_1:: + + 'sendp([Ether(dst="%s")/Dot1Q(id=0x8100,vlan=16)/Dot1Q(id=0x8100,vlan=1)/IP(src="192.168.0.1",dst="192.168.0.2", \ + tos=16, ttl=255)/UDP(sport="1021",dport="1022")/Raw(%s)], iface="%s")' % (dst_mac, payload, itf) + +packet_1 should be received by queue 1. + +packet_2:: + 'sendp([Ether(dst="%s")/Dot1Q(id=0x8100,vlan=16)/Dot1Q(id=0x8100,vlan=15)/IP(src="192.168.0.1",dst="192.168.0.2", \ + tos=16, ttl=255)/UDP(sport="1021",dport="1022")/Raw(%s)], iface="%s")' % (dst_mac, payload, itf) + +packet_2 should be received by queue 2. + +packet_3:: + 'sendp([Ether(dst="%s")/Dot1Q(id=0x8100,vlan=16)/Dot1Q(id=0x8100,vlan=255)/IP(src="192.168.0.1",dst="192.168.0.2", \ + tos=16, ttl=255)/UDP(sport="1021",dport="1022")/Raw(%s)], iface="%s")' % (dst_mac, payload, itf) + +packet_3 should be received by queue 3. + +packet_4:: + 'sendp([Ether(dst="%s")/Dot1Q(id=0x8100,vlan=16)/Dot1Q(id=0x8100,vlan=4095)/IP(src="192.168.0.1",dst="192.168.0.2", \ + tos=16, ttl=255)/UDP(sport="1021",dport="1022")/Raw(%s)], iface="%s")' % (dst_mac, payload, itf) + +packet_4 should be received by queue 4. + +delete rule_1, send packet_1 again, packet_1 should be received by queue 0. +delete rule_2, send packet_2 again, packet_2 should be received by queue 0. +delete rule_3, send packet_3 again, packet_3 should be received by queue 0. +delete rule_4, send packet_4 again, packet_4 should be received by queue 0. + +5) removed all entry of fdir:: + + testpmd>flush_flow_director 0 + testpmd>show port fdir 0 + -- 1.9.3