From: "xu,gang" <gangx.xu@intel.com>
To: dts@dpdk.org
Cc: "xu,gang" <gangx.xu@intel.com>
Subject: [dts] [PATCH V1] add test suite l2fwd_jobstats
Date: Mon, 20 Feb 2017 17:08:18 +0800 [thread overview]
Message-ID: <1487581699-30545-1-git-send-email-gangx.xu@intel.com> (raw)
Signed-off-by: xu,gang <gangx.xu@intel.com>
---
tests/TestSuite_l2fwd_jobstats.py | 201 ++++++++++++++++++++++++++++++++++++++
1 file changed, 201 insertions(+)
create mode 100644 tests/TestSuite_l2fwd_jobstats.py
diff --git a/tests/TestSuite_l2fwd_jobstats.py b/tests/TestSuite_l2fwd_jobstats.py
new file mode 100644
index 0000000..858b710
--- /dev/null
+++ b/tests/TestSuite_l2fwd_jobstats.py
@@ -0,0 +1,201 @@
+# BSD LICENSE
+#
+# Copyright(c) 2010-2017 Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+"""
+DPDK Test suite.
+Test l2fwd-jobstats
+"""
+
+import string
+import time
+import re
+import utils
+from test_case import TestCase
+from qemu_kvm import QEMUKvm
+from packet import Packet, sniff_packets, load_sniff_packets
+
+
+class TestL2fwdJobstats(TestCase):
+
+ def set_up_all(self):
+ """
+ Run at the start of each test suite.
+ """
+
+ self.dut_ports = self.dut.get_ports(self.nic)
+ self.verify(len(self.dut_ports) >= 2, "Insufficient ports")
+ cores = self.dut.get_core_list("1S/4C/1T")
+ self.coremask = utils.create_mask(cores)
+ self.portmask = utils.create_mask(self.dut_ports)
+ self.path = "./examples/l2fwd-jobstats/build/l2fwd-jobstats"
+
+ self.tester_tx_port = self.tester.get_local_port(self.dut_ports[0])
+ self.tester_tx_pci = self.tester.ports_info[self.tester_tx_port]['pci']
+ port = self.tester.ports_info[self.tester_tx_port]['port']
+ self.tester_port_driver = port.get_nic_driver()
+ self.intf = port.get_interface_name()
+
+ # build sample app
+ out = self.dut.build_dpdk_apps("./examples/l2fwd-jobstats")
+ self.verify("Error" not in out, "compilation error 1")
+ self.verify("No such file" not in out, "compilation error 2")
+
+ def set_up(self):
+ """
+ Run before each test case.
+ """
+ pass
+
+ def generate_pcap_pkt(self, dst, load, pktname='flow.pcap'):
+ """
+ generate pcap pkt
+ """
+ context = '[Ether(dst="%s")/IP()/Raw(load=%s)]' % (dst, load)
+ self.session_secondary.send_expect('scapy', '>>> ', 10)
+ self.session_secondary.send_expect(
+ 'wrpcap("%s", %s)' % (pktname, context), '>>> ', 10)
+ self.session_secondary.send_expect('quit()', '#', 10)
+
+ def pktgen_prerequisites(self):
+ """
+ igb_uio.ko should be put in
+ have enough hugetpages
+ bind port
+ before you using pktgen
+ """
+ self.tester.send_expect("modprobe uio", "#", 70)
+ out = self.tester.send_expect("lsmod | grep igb_uio", "#")
+ if "igb_uio" not in out:
+ self.tester.send_expect("rmmod -f igb_uio", "#", 70)
+ self.tester.send_expect(
+ "insmod ~/dpdk/x86_64-native-linuxapp-gcc/kmod/igb_uio.ko", "#", 70)
+ out = self.tester.send_expect("lsmod | grep igb_uio", "#")
+ self.verify("igb_uio" in out,
+ "No file igb_uio.ko, please add it in ~")
+ total_huge_pages = self.tester.get_total_huge_pages()
+ if total_huge_pages == 0:
+ self.tester.mount_huge_pages()
+ self.tester.send_expect(
+ "./dpdk_nic_bind.py --bind=igb_uio %s" % self.tester_tx_pci, "#")
+
+ def start_pktgen(self, pktname='flow.pcap'):
+ """
+ start pktgen with pcap file
+ """
+ self.session_secondary.send_expect(
+ "tar xvf ./dep/tgen.tgz -C ~", '#', 20)
+ self.session_secondary.send_expect(
+ "./pktgen -c 0xf -n 2 --proc-type auto -- -P -T -m '1.0' -s 0:%s" % pktname, "", 100)
+
+ def set_parameter(self, rate, count):
+ """
+ start pgtgen with send package's rate and count
+ """
+ self.session_secondary.send_expect("set 0 rate %s" % rate, "", 20)
+ self.session_secondary.send_expect("set 0 count %d" % count, "", 20)
+ self.session_secondary.send_expect("start all", "", 20)
+
+ def test_stability_rate(self):
+ """
+ Verify l2fwd_jobstats rx package stability on different rate
+ """
+ cmd = self.path + " -c %s -n %d -- -q 8 -p %s -l" % (
+ self.coremask, self.dut.get_memory_channels(), self.portmask)
+ self.dut.send_expect(cmd, "Port statistics", 60)
+ out = self.dut.get_session_output(timeout=1)
+ total_sent = re.search("Total packets sent:\s*(\d*)", out)
+ total_received = re.search("Total packets received:\s*(\d*)", out)
+ total_dropped = re.search("Total packets dropped:\s*(\d*)", out)
+ pack_sent = total_sent.group(1)
+ pack_received = total_received.group(1)
+ pack_dropped = total_dropped.group(1)
+ self.verify(int(pack_sent) == int(pack_received) == int(
+ pack_dropped) == 0, "Error: get wrong package")
+
+ self.pktgen_prerequisites()
+ self.session_secondary = self.tester.create_session(
+ name='pktgen_session')
+ dst = self.dut.ports_info[self.dut_ports[0]]['mac']
+ load = "'X'*46"
+ self.generate_pcap_pkt(dst, load)
+ self.start_pktgen()
+ total = []
+ rates = [10, 20, 30, 40, 50, 60, 70, 80, 90]
+ for rate in rates:
+ self.set_parameter(rate, 1000000000)
+ put = self.dut.get_session_output(timeout=60)
+ pkt_rare = re.findall(r"management\s.*\s(\d*.\d*)%", put)
+ pkt_received = re.findall("Total packets received:\s*(\d*)", put)
+ total.append(float(max(pkt_rare)))
+
+ self.verify(sorted(total) == total, "Error: %s rate abnormal" % total)
+
+ def test_stability_rx(self):
+ """
+ Verify l2fwd_jobstats rx package stability
+ """
+ cmd = self.path + " -c %s -n %d -- -q 8 -p %s -l" % (
+ self.coremask, self.dut.get_memory_channels(), self.portmask)
+ self.dut.send_expect(cmd, "Port statistics", 60)
+ self.scapy_send_packet(100)
+ out = self.dut.get_session_output(timeout=60)
+ total_received = re.findall("Total packets received:\s*(\d*)", out)
+
+ self.verify(int(max(total_received)) == 100,
+ "Error: get only %s not 1000000" % int(max(total_received)))
+
+ def scapy_send_packet(self, num=1):
+ """
+ Send a packet to port
+ """
+ self.dmac = self.dut.get_mac_address(self.dut_ports[0])
+ txport = self.tester.get_local_port(self.dut_ports[0])
+ self.txItf = self.tester.get_interface(txport)
+ pkt = Packet(pkt_type='UDP')
+ pkt.config_layer('ether', {'dst': self.dmac, })
+ pkt.send_pkt(tx_port=self.txItf, count=num)
+
+ def tear_down(self):
+ """
+ Run after each test case.
+ """
+ self.tester.send_expect("./dpdk_nic_bind.py --bind=%s %s" %
+ (self.tester_port_driver, self.tester_tx_pci), "#")
+ self.tester.send_expect("ifconfig %s up" % self.intf, "#")
+ self.dut.kill_all()
+ time.sleep(2)
+
+ def tear_down_all(self):
+ """
+ Run after each test suite.
+ """
+ pass
--
1.9.3
next reply other threads:[~2017-02-20 9:07 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-20 9:08 xu,gang [this message]
2017-02-20 9:08 ` [dts] [PATCH V1] add test plan l2fwd_jobstats xu,gang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1487581699-30545-1-git-send-email-gangx.xu@intel.com \
--to=gangx.xu@intel.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).