test suite reviews and discussions
 help / color / mirror / Atom feed
* [dts] [PATCH] VF daemon DPDK PF+DPDK VF test plan
@ 2017-02-23  3:20 Xueqin Lin
  2017-02-23  9:32 ` Liu, Yong
  0 siblings, 1 reply; 5+ messages in thread
From: Xueqin Lin @ 2017-02-23  3:20 UTC (permalink / raw)
  To: dts; +Cc: Xueqin Lin

---
 test_plans/vf_daemon_test_plan.rst | 410 +++++++++++++++++++++++++++++++++++++
 1 file changed, 410 insertions(+)
 create mode 100644 test_plans/vf_daemon_test_plan.rst

diff --git a/test_plans/vf_daemon_test_plan.rst b/test_plans/vf_daemon_test_plan.rst
new file mode 100644
index 0000000..4e66d8a
--- /dev/null
+++ b/test_plans/vf_daemon_test_plan.rst
@@ -0,0 +1,410 @@
+.. Copyright (c) <2017>, Intel Corporation
+      All rights reserved.
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+
+   - Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+
+   - Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in
+     the documentation and/or other materials provided with the
+     distribution.
+
+   - Neither the name of Intel Corporation nor the names of its
+     contributors may be used to endorse or promote products derived
+     from this software without specific prior written permission.
+
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+   FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+   COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+   INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+   SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+   STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+   OF THE POSSIBILITY OF SUCH DAMAGE.
+
+============================
+VFD as SRIOV Policy Manager
+============================
+
+VFD is SRIOV Policy Manager (daemon) running on the host allowing 
+configuration not supported by kernel NIC driver, supports ixgbe and 
+i40e drivers' NIC. Run on the host for policy decisions w.r.t. what a 
+VF can and cannot do to the PF. Only the DPDK PF would provide a callback 
+to implement these features, the normal kernel drivers would not have the 
+callback so would not support the features. Allow passing information to 
+application controlling PF when VF message box event received such as those 
+listed below, so action could be taken based on host policy. Stop VM1 from 
+asking for something that compromises VM2. 
+
+Multiple purposes:
+1) set VF MAC anti-spoofing
+2) set VF VLAN anti-spoofing
+3) set TX loopback
+4) set VF unicast promiscuous mode
+5) set VF multicast promiscuous mode
+6) set VF MTU
+7) get/reset VF stats
+8) set VF MAC address
+9) set VF VLAN stripping
+10) VF VLAN insertion
+12) set VF broadcast mode
+12) set VF VLAN tag
+13) set VF VLAN filter
+14) Set/reset the queue drop enable bit for all pools(only ixgbe support)
+15) Set/reset the enable drop bit in the split receive control register
+   (only ixgbe support)
+VFD also includes VF to PF mailbox message management by APP. When PF 
+receives mailbox messages from VF, PF should call the callback provided 
+by APP to know if they're permitted to be processed.
+
+Prerequisites
+=============
+1. Host PF in DPDK driver. Create 2 VFs from 1 PF with dpdk driver,take 
+   Niantic for example::
+        ./tools/dpdk-devbind.py -b igb_uio 81:00.0
+        echo 2 >/sys/bus/pci/devices/0000:81:00.0/max_vfs
+
+2. Detach VFs from the host::
+        rmmod ixgbevf
+
+3. Passthrough VF 81:10.0 to vm0 and passthrough VF 81:10.2 to vm1, 
+   start vm0 and vm1
+
+4. Login vm0 and vm1, then bind VF0 device to igb_uio driver.
+
+5. Start testpmd on host and vm0 in chained port topology:: 
+        ./testpmd -c f -n 4 -- -i --port-topology=chained --txqflags=0
+
+
+Test Case 1: Set VLAN insert for VF from PF
+===========================================
+1. Disable vlan insert for VF0 from PF::
+	testpmd> set vf vlan insert 0 0 0
+
+2. Start VF0 testpmd, set it in mac forwarding mode and enable verbose output
+
+3. Send packet from tester to VF0 without vlan id
+
+4. Stop VF0 testpmd and check VF0 can receive packet without any vlan id
+
+5. Enable vlan insert and insert random vlan id (1~4095) for VF0 from PF::  
+	testpmd> set vf vlan insert 0 0 id
+
+6. Start VF0 testpmd
+
+7. Send packet from tester to VF0 without vlan id 
+
+8. Stop VF0 testpmd and check VF0 can receive packet with configured vlan id 
+        
+
+Test Case 2: Set VLAN strip for VF from PF
+==========================================
+1. Disable VLAN strip for all queues for VF0 from PF::
+	testpmd> set vf vlan stripq 0 0 off
+
+2. Start VF0 testpmd, add rx vlan id as random 1~4095, set it in mac 
+   forwarding mode and enable verbose output::
+	testpmd> rx_vlan add id 0
+
+3. Send packet from tester to VF0 with configured vlan id 
+
+4. Stop VF0 testpmd and check VF0 can receive packet with configured vlan id
+        
+5. Enable VLAN strip for all queues for VF0 from PF::
+	testpmd> set vf vlan stripq 0 0 on
+
+6. Start VF0 testpmd
+
+7. Send packet from tester to VF0 with configured vlan id 
+
+8. Stop VF0 testpmd and check VF0 can receive packet without any vlan id
+
+9. Remove vlan id on VF0
+ 
+
+Test Case 3: Set VLAN antispoof for VF from PF
+==============================================
+1. Disable vlan filter and strip from PF::
+	testpmd> vlan set filter off 0
+	testpmd> vlan set strip off 0
+
+2. Add a random 1~4095 vlan id to set filter from PF for VF::
+	testpmd> rx_vlan add id port 0 vf 1
+
+3. Disable vlan antispoof for VF from PF:: 
+	testpmd> set vf vlan antispoof 0 0 off
+
+4. Disable vlan filter and strip on VF0
+		
+5. Start testpmd on VF0, set it in mac forwarding mode and enable 
+   verbose output
+
+6. Send packets with matching/non-matching/no vlan id on tester port
+
+7. Stop VF0 testpmd and check VF0 can receive and transmit packets with 
+   matching/non-matching/no vlan id
+
+8. Enable mac antispoof and vlan antispoof for vf from PF::
+	testpmd> set vf mac antispoof 0 0 on
+	testpmd> set vf vlan antispoof 0 0 on
+
+9. Start VF0 testpmd
+
+10. Send packets with matching/non-matching/no vlan id on tester port
+
+11. Stop VF0 testpmd and check VF0 can receive all but only transmit 
+    packet with matching vlan id
+
+
+Test Case 4: Set mac antispoof for VF from PF
+===============================================
+1. Add fake mac and use fake mac instead of transmitted mac in the 
+   macswap mode, so default is non-matching SA::
+	.addr_bytes = {0x00, 0x11, 0x22, 0x33, 0x44, 0x55} 
+
+2. Disable VF0 mac antispoof from PF::
+	testpmd> set vf mac antispoof 0 0 off
+
+3. Start testpmd on VF0, set it in macswap forwarding mode and enable 
+   verbose output::
+	testpmd> set fwd macswap
+
+4. Send packet from tester to VF0 with correct SA, but code has changed 
+   to use fake SA
+
+5. Stop VF0 testpmd and check VF0 can receive then transmit packet
+
+6. Enable VF0 mac antispoof from PF::
+	testpmd> set vf mac antispoof 0 0 on
+
+7. Start VF0 testpmd
+
+8. Send packet from tester to VF0 with correct SA, but code has changed 
+   to use fake SA
+
+9. Stop VF0 testpmd and check VF0 can receive packet but can't transmit packet
+
+10. Recover original code
+
+
+Test Case 5: Set the MAC address for VF from PF
+===============================================
+1. Set VF0 different MAC address from PF, such as A2:22:33:44:55:66 ::
+	testpmd> set vf mac addr 0 0 A2:22:33:44:55:66
+
+2. Stop VF0 testpmd and restart VF0 testpmd, check VF0 address is configured 
+   address A2:22:33:44:55:66
+
+3. Set testpmd in mac forwarding mode and enable verbose output
+
+4. Send packet from tester to VF0 configured address
+
+5. Stop VF0 testpmd and check VF0 can receive packet
+
+
+Test Case 6: Enable/disable tx loopback
+=======================================
+1. Disable tx loopback for VF0 from PF::
+	testpmd> set tx loopback 0 off
+
+2. Set VF0 in rxonly forwarding mode and start testpmd
+
+3. tcpdump on the tester port
+
+4. Send 10 packets from VF1 to VF0
+
+5. Stop VF0 testpmd, check VF0 can't receive any packet but tester port 
+   could capture packet
+
+6. Enable tx loopback for VF0 from PF:: 
+	testpmd> set tx loopback 0 on
+
+7. Start VF0 testpmd
+
+8. Send packet from VF1 to VF0
+
+9. Stop VF0 testpmd, check VF0 can receive packet,but tester port can't 
+   capture packet
+
+
+Test Case 7: Set drop enable bit for all queues
+===============================================
+1. Bind VF1 device to igb_uio driver and start testpmd in chained port 
+   topology
+
+2. Disable drop enable bit for all queues from PF::
+	testpmd> set all queues drop 0 off
+
+3. Only start VF1 to capture packet, set it in rxonly forwarding mode and 
+   enable verbose output
+
+4. Send 200 packets to VF0, make VF0 queue full of packets
+
+5. Send 20 packets to VF1 
+
+6. Stop VF1 testpmd and check VF1 can't receive packet
+
+7. Enable drop enable bit for all queues from PF::
+	testpmd> set all queues drop 0 on
+
+8. Start VF1 testpmd
+
+9. Stop VF1 testpmd and check VF1 can receive original queue buffer 20 packets
+
+10. Start VF1 testpmd
+
+11. Send 20 packets to VF1 
+
+12. Stop VF1 testpmd and check VF1 can receive 20 packets
+
+
+
+Test Case 8: Set split drop enable bit for VF from PF
+=====================================================
+1. Disable split drop enable bit for VF0 from PF::
+	testpmd> set vf split drop 0 0 off
+
+2. Set VF0 and host in rxonly forwarding mode and start testpmd
+	   
+3. Send a burst of 20000 packets to VF0 and check PF and VF0 can receive 
+   all packets
+
+4. Enable split drop enable bit for VF0 from PF::
+	testpmd> set vf split drop 0 0 on
+
+5. Send a burst of 20000 packets to VF0 and check some packets dropped 
+   on PF and VF0
+
+
+
+Test Case 9: Get/Reset stats for VF from PF
+===========================================
+1. Add testpmd and some print code in the rte_pmd_i40e_set_vf_vlan_filter() 
+   function(drivers/net/i40e/i40e_ethdev.c) to start test, rebuild the code 
+
+2. Get stats output for VF0 from PF, and check RX/TX packets is 0::
+	testpmd> get vf stats 0 0
+
+3. Set VF0 in mac forwarding mode and start testpmd
+
+4. Send 10 packets to VF0 and check VF0 can receive 10 packets	 
+
+5. Get stats for VF0 from PF, and check RX/TX packets is 10
+
+6. Reset stats for VF0 from PF, and check PF and VF0 RX/TX packets is 0::
+	testpmd> reset vf stats 0 0
+	testpmd> get vf stats 0 0
+
+
+Test Case 10: enhancement to identify VF MTU change
+===================================================
+1. Set VF0 in mac forwarding mode and start testpmd
+
+2. Default mtu size is 1500, send one packet with length bigger than default 
+   mtu size, such as 2000 from tester,check VF0 can receive but can't transmit 
+   packet
+
+3. Set VF0 mtu size as 3000, but need to stop then restart port to active mtu::
+	testpmd> port stop all
+	testpmd> port config mtu 0 3000
+	testpmd> port start all
+	testpmd> start
+4. Send one packet with length 2000 from tester,check VF0 can receive and 
+   transmit packet
+
+5. Send one packet with length bigger than configured mtu size, such as 5000 
+   from tester, check VF0 can receive but can't transmit packet
+
+
+Test Case 11: Enable/disable vlan tag forwarding to VSIs  
+========================================================
+1. Disable VLAN tag for VF0 from PF::
+	testpmd> set vf vlan tag 0 0 off
+
+2. Start VF0 testpmd, add rx vlan id as random 1~4095, set it in mac forwarding 
+   mode and enable verbose output
+
+3. Send packet from tester to VF0 with vlan tag(vlan id should same as rx_vlan)
+
+4. Stop VF0 testpmd and check VF0 can't receive vlan tag packet 
+
+5. Enable VLAN tag for VF0 from PF::
+	testpmd> set vf vlan tag 0 0 on
+
+6. Start VF0 testpmd
+
+7. Send packet from tester to VF0 with vlan tag(vlan id should same as rx_vlan)
+
+8. Stop VF0 testpmd and check VF0 can receive vlan tag packet
+
+9. Remove vlan id on VF0
+
+
+Test Case 12: Broadcast mode
+============================
+1. Start testpmd on VF0, set it in rxonly mode and enable verbose output
+
+2. Disable broadcast mode for VF0 from PF::
+        testpmd>set vf broadcast 0 0 off
+
+3. Send packets from tester with broadcast address,ff:ff:ff:ff:ff:ff, and check 
+   VF0 can not receive the packet
+
+4. Enable broadcast mode for VF0 from PF::
+        testpmd>set vf broadcast 0 0 on
+
+5. Send packets from tester with broadcast address,ff:ff:ff:ff:ff:ff, and check 
+   VF0 can receive the packet
+
+
+Test Case 13: Multicast mode
+====================================
+1. Start testpmd on VF0, set it in rxonly mode and enable verbose output
+
+2. Disable promisc and multicast mode for VF0 from PF::
+        testpmd>set vf promisc 0 0 off
+        testpmd>set vf allmulti 0 0 off
+
+3. Send packet from tester to VF0 with multicast MAC, and check VF0 can not 
+   receive the packet
+
+4. Enable multicast mode for VF0 from PF::
+        testpmd>set vf allmulti 0 0 on
+
+5. Send packet from tester to VF0 with multicast MAC, and check VF0 can receive 
+   the packet
+
+
+
+Test Case 14: Promisc mode
+==================================
+1. Start testpmd on VF0, set it in rxonly mode and enable verbose output
+
+2. Disable promisc mode for VF from PF::
+        testpmd>set vf promisc 0 0 off
+
+3. Send packet from tester to VF0 with random MAC, and check VF0 can not 
+   receive the packet
+
+4. Send packet from tester to VF0 with correct MAC, and check VF0 can receive 
+   the packet
+
+5. Enable promisc mode for VF from PF::
+        testpmd>set vf promisc 0 0 on
+
+6. Send packet from tester to VF0 with random MAC, and the packet can be 
+   received by VF0
+
+7. Send packet from tester to VF0 with correct MAC, and the packet can be 
+   received by VF0
+
+
+
-- 
2.5.5

^ permalink raw reply	[flat|nested] 5+ messages in thread
* [dts] [PATCH] VF daemon DPDK PF+DPDK VF test plan
@ 2017-02-22  1:17 Xueqin Lin
  2017-02-23  5:05 ` Liu, Yong
  0 siblings, 1 reply; 5+ messages in thread
From: Xueqin Lin @ 2017-02-22  1:17 UTC (permalink / raw)
  To: dts; +Cc: Lin,Xueqin

From: "Lin,Xueqin" <xueqin.lin@intel.com>

---
 test_plans/vf_daemon_test_plan.rst | 446 +++++++++++++++++++++++++++++++++++++
 1 file changed, 446 insertions(+)
 create mode 100644 test_plans/vf_daemon_test_plan.rst

diff --git a/test_plans/vf_daemon_test_plan.rst b/test_plans/vf_daemon_test_plan.rst
new file mode 100644
index 0000000..986610a
--- /dev/null
+++ b/test_plans/vf_daemon_test_plan.rst
@@ -0,0 +1,446 @@
+.. Copyright (c) <2017>, Intel Corporation
+      All rights reserved.
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+
+   - Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+
+   - Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in
+     the documentation and/or other materials provided with the
+     distribution.
+
+   - Neither the name of Intel Corporation nor the names of its
+     contributors may be used to endorse or promote products derived
+     from this software without specific prior written permission.
+
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+   FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+   COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+   INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+   SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+   STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+   OF THE POSSIBILITY OF SUCH DAMAGE.
+
+============================
+VFD as SRIOV Policy Manager
+============================
+
+VFD is SRIOV Policy Manager (daemon) running on the host allowing configuration not supported by kernel NIC driver.
+Run on the host for policy decisions w.r.t. what a VF can and cannot do to the PF. Only the DPDK PF would provide 
+a callback to implement these features, the normal kernel drivers would not have the callback so would not support 
+the features. Allow passing information to application controlling PF when VF message box event received such as 
+those listed below, so action could be taken based on host policy. Stop VM1 from asking for something that 
+compromises VM2. 
+
+Multiple purposes:
+1) set VF MAC anti-spoofing
+2) set VF VLAN anti-spoofing
+3) set TX loopback
+4) set VF unicast promiscuous mode
+5) set VF multicast promiscuous mode
+6) set VF MTU
+7) get/reset VF stats
+8) set VF MAC address
+9) set VF VLAN stripping
+10) VF VLAN insertion
+12) set VF broadcast mode
+12) set VF VLAN tag
+13) set VF VLAN filter
+14) Set/reset the queue drop enable bit for all pools(only ixgbe support)
+15) Set/reset the enable drop bit in the split receive control register(only ixgbe support)
+VFD also includes VF to PF mailbox message management by APP. When PF receives mailbox
+messages from VF, PF should call the callback provided by APP to know if they're
+permitted to be processed.
+
+Prerequisites
+=============
+1. Get the pci device id of DUT,take Niantic for example::
+   ./tools/dpdk-devbind.py --st
+   0000:81:00.0 '82599ES 10-Gigabit SFI/SFP+ Network Connection' if=ens259f0 drv=ixgbe unused=igb_uio
+
+2. Host PF in DPDK driver. Create 2 VF from 1 PF with dpdk driver::
+   ./tools/dpdk-devbind.py -b igb_uio 81:00.0
+   echo 2 >/sys/bus/pci/devices/0000:81:00.0/max_vfs
+   0000:81:10.0 '82599 Ethernet Controller Virtual Function' if=eth0 drv=ixgbevf unused=igb_uio
+   0000:81:10.2 '82599 Ethernet Controller Virtual Function' if=eth1 drv=ixgbevf unused=igb_uio
+
+3. Detach VFs from the host::
+   rmmod ixgbevf
+   =====================
+   0000:81:10.0 '82599 Ethernet Controller Virtual Function' unused=ixgbevf,igb_uio
+   0000:81:10.2 '82599 Ethernet Controller Virtual Function' unused=ixgbevf,igb_uio
+
+4. Passthrough VF 81:10.0 to vm0 and passthrough VF 81:10.2 to vm1, start vm0 and vm1
+
+5. Login vm0 and vm1, then bind VF0 device to igb_uio driver.
+
+   ./tools/dpdk_nic_bind.py --bind=igb_uio 00:03.0
+
+6. Start testpmd on host and vm0 in chained port topology:: 
+   host: ./x86_64-native-linuxapp-gcc/app/testpmd -c f -n 4 -- -i --port-topology=chained --txqflags=0
+   vm0:  ./x86_64-native-linuxapp-gcc/app/testpmd -c f -n 4 -- -i --port-topology=chained --txqflags=0
+
+Test Case 1: Set VLAN insert for VF from PF
+===========================================
+1. Disable vlan insert for VF0 from PF::
+	testpmd> set vf vlan insert 0 0 0
+
+2. Start testpmd on VF0, set it in mac forwarding mode and enable verbose output::
+	testpmd> set fwd mac
+	testpmd> set verbose 1
+	testpmd> start
+
+3. Send packet from tester to VF0 without vlan id
+
+4. Stop VF0 testpmd and check VF0 can receive packet without any vlan id
+
+5. Enable vlan insert and insert random vlan id (1~4095) for VF0 from PF::  
+	testpmd> set vf vlan insert 0 0 id
+
+6. Start VF0 testpmd
+
+7. Send packet from tester to VF0 without vlan id 
+
+8. Stop VF0 testpmd and check VF0 can receive packet with configured vlan id 
+        
+
+Test Case 2: Set VLAN strip for VF from PF
+==========================================
+1. Disable VLAN strip for all queues for VF0 from PF::
+	testpmd> set vf vlan stripq 0 0 off
+
+2. Start VF0 testpmd, add rx vlan id as random 1~4095, set it in mac forwarding mode and enable verbose output::
+	testpmd> rx_vlan add id 0
+	testpmd> set fwd mac
+	testpmd> set verbose 1
+	testpmd> start
+
+3. Send packet from tester to VF0 with configured vlan id 
+
+4. Stop VF0 testpmd and check VF0 can receive packet with configured vlan id
+        
+5. Enable VLAN strip for all queues for VF0 from PF::
+	testpmd> set vf vlan stripq 0 0 on
+
+6. Start VF0 testpmd
+
+7. Send packet from tester to VF0 with configured vlan id 
+
+8. Stop VF0 testpmd and check VF0 can receive packet without any vlan id
+
+9. Remove vlan id on VF0::
+	testpmd> rx_vlan rm id 0
+ 
+
+Test Case 3: Set VLAN antispoof for VF from PF
+==============================================
+1. Disable vlan filter and strip from PF::
+	testpmd> vlan set filter off 0
+	testpmd> vlan set strip off 0
+
+2. Add a random 1~4095 vlan id to set filter from PF for VF::
+	testpmd> rx_vlan add id port 0 vf 1
+
+3. Disable vlan antispoof for VF from PF:: 
+	testpmd> set vf vlan antispoof 0 0 off
+
+4. Disable vlan filter and strip on VF0::
+	testpmd> vlan set filter off 0
+	testpmd> vlan set strip off 0
+		
+5. Start testpmd on VF0, set it in mac forwarding mode and enable verbose output::
+	testpmd> set fwd mac
+	testpmd> set verbose 1
+	testpmd> start
+
+6. Send packets with matching/non-matching/no vlan id on tester port
+
+7. Stop VF0 testpmd and check VF0 can receive and transmit packets with matching/non-matching/no vlan id
+
+8. Enable mac antispoof and vlan antispoof for vf from PF::
+	testpmd> set vf mac antispoof 0 0 on
+	testpmd> set vf vlan antispoof 0 0 on
+
+9. Start VF0 testpmd
+
+10. Send packets with matching/non-matching/no vlan id on tester port
+
+11. Stop VF0 testpmd and check VF0 can receive all but only transmit packet with matching vlan id
+
+
+Test Case 4: Set mac antispoof for VF from PF
+===============================================
+1. Add fake mac and use fake mac instead of transmitted mac in the macswap mode, so default is non-matching SA::
+	.addr_bytes = {0x00, 0x11, 0x22, 0x33, 0x44, 0x55} 
+
+2. Disable VF0 mac antispoof from PF::
+	testpmd> set vf mac antispoof 0 0 off
+
+3. Start testpmd on VF0, set it in macswap forwarding mode and enable verbose output::
+	testpmd> set fwd macswap
+	testpmd> set verbose 1
+	testpmd> start
+
+4. Send packet from tester to VF0 with correct SA, but code has changed to use fake SA
+
+5. Stop VF0 testpmd and check VF0 can receive then transmit packet
+
+6. Enable VF0 mac antispoof from PF::
+	testpmd> set vf mac antispoof 0 0 on
+
+7. Start VF0 testpmd
+
+8. Send packet from tester to VF0 with correct SA, but code has changed to use fake SA
+
+9. Stop VF0 testpmd and check VF0 can receive packet but can't transmit packet
+
+10. Recover original code
+
+
+Test Case 5: Set the MAC address for VF from PF
+===============================================
+1. Set VF0 different MAC address from PF, such as A2:22:33:44:55:66::
+	testpmd> set vf mac addr 0 0 A2:22:33:44:55:66
+
+2. Stop VF0 testpmd and restart VF0 testpmd, check VF0 address is configured address A2:22:33:44:55:66
+
+3. Set testpmd in mac forwarding mode and enable verbose output::
+	testpmd> set fwd mac
+	testpmd> set verbose 1
+	testpmd> start
+
+4. Send packet from tester to VF0 configured address
+
+5. Stop VF0 testpmd and check VF0 can receive packet
+
+
+Test Case 6: Enable/disable tx loopback
+=======================================
+1. Disable tx loopback for VF0 from PF::
+	testpmd> set tx loopback 0 off
+
+2. Set VF0 in rxonly forwarding mode and start testpmd::
+	testpmd> set fwd rxonly
+	testpmd> start
+
+3. tcpdump on the tester port
+
+4. Send 10 packets from VF1 to VF0
+
+5. Stop VF0 testpmd, check VF0 can't receive any packet but tester port could capture packet
+
+6. Enable tx loopback for VF0 from PF:: 
+	testpmd> set tx loopback 0 on
+
+7. Start VF0 testpmd
+
+8. Send packet from VF1 to VF0
+
+9. Stop VF0 testpmd, check VF0 can receive packet,but tester port can't capture packet
+
+
+Test Case 7: Set drop enable bit for all queues
+===============================================
+1. Bind VF1 device to igb_uio driver and start testpmd in chained port topology::
+	./tools/dpdk_nic_bind.py --bind=igb_uio 00:03.0
+	./x86_64-native-linuxapp-gcc/app/testpmd -c 3f -l 1-5 -n 4 -- -i --port-topology=chained --txqflags=0
+
+2. Disable drop enable bit for all queues from PF::
+	testpmd> set all queues drop 0 off
+
+3. Only start VF1 to capture packet, set it in rxonly forwarding mode and enable verbose output::
+	testpmd> set fwd rxonly
+	testpmd> set verbose 1
+	testpmd> start
+
+4. Send 200 packets to VF0, make VF0 queue full of packets
+
+5. Send 20 packets to VF1 
+
+6. Stop VF1 testpmd and check VF1 can't receive packet
+
+7. Enable drop enable bit for all queues from PF::
+	testpmd> set all queues drop 0 on
+
+8. Start VF1 testpmd
+
+9. Stop VF1 testpmd and check VF1 can receive original queue buffer 20 packets
+
+10. Start VF1 testpmd
+
+11. Send 20 packets to VF1 
+
+12. Stop VF1 testpmd and check VF1 can receive 20 packets
+
+Note: i40e unsupports this feature.
+
+
+Test Case 8: Set split drop enable bit for VF from PF
+=====================================================
+1. Disable split drop enable bit for VF0 from PF::
+	testpmd> set vf split drop 0 0 off
+
+2. Set VF0 and host in rxonly forwarding mode and start testpmd::
+	testpmd> set fwd rxonly
+	testpmd> start
+	   
+3. Send a burst of 20000 packets to VF0 and check PF and VF0 can receive all packets
+
+4. Enable split drop enable bit for VF0 from PF::
+	testpmd> set vf split drop 0 0 on
+
+5. Send a burst of 20000 packets to VF0 and check some packets dropped on PF and VF0
+
+Note: i40e unsupports this feature.
+
+
+Test Case 9: Get/Reset stats for VF from PF
+===========================================
+1. Add testpmd code to test this feature
+
+2. Get stats for VF0 from PF, and check RX/TX packets is 0::
+	testpmd> get vf stats 0 0
+		
+        ################## NIC statistics for port 0  ################
+        RX-packets: 0           RX-errors:  0           RX-bytes:  0
+        TX-packets: 0           TX-errors:  0           TX-bytes:  0
+	###############################################################
+		
+3. Set VF0 in mac forwarding mode and start testpmd::
+	testpmd> set fwd mac
+	testpmd> start
+4. Send 10 packets to VF0 and check VF0 can receive 10 packets	 
+
+5. Get stats for VF0 from PF, and check RX/TX packets is 10::
+	testpmd> get vf stats 0 0
+
+        ################## NIC statistics for port 0  ################
+        RX-packets: 10           RX-errors:  0         RX-bytes:  10
+        TX-packets: 10           TX-errors:  0         TX-bytes:  10
+	###############################################################
+
+6. Reset stats for VF0 from PF, and check PF and VF0 RX/TX packets is 0::
+	testpmd> reset vf stats 0 0
+	testpmd> get vf stats 0 0
+
+        ################## NIC statistics for port 0  ################
+        RX-packets: 0           RX-errors:  0           RX-bytes:  0
+        TX-packets: 0           TX-errors:  0           TX-bytes:  0
+	###############################################################
+   
+
+Test Case 10: enhancement to identify VF MTU change
+===================================================
+1. Set VF0 in mac forwarding mode and start testpmd::
+	testpmd> set fwd mac
+    testpmd> start
+2. Default mtu size is 1500, send one packet with length bigger than default mtu size, such as 2000 from tester,check VF0 can receive but can't transmit packet
+
+3. Set VF0 mtu size as 3000, but need to stop then restart port to active mtu::
+	testpmd> port stop all
+	testpmd> port config mtu 0 3000
+	testpmd> port start all
+	testpmd> start
+4. Send one packet with length 2000 from tester,check VF0 can receive and transmit packet
+
+5. Send one packet with length bigger than configured mtu size, such as 5000 from tester, check VF0 can receive but can't transmit packet
+
+
+Test Case 11: Enable/disable vlan tag forwarding to VSIs  
+========================================================
+1. Disable VLAN tag for VF0 from PF::
+	testpmd> set vf vlan tag 0 0 off
+
+2. Start VF0 testpmd, add rx vlan id as random 1~4095, set it in mac forwarding mode and enable verbose output::
+	testpmd> rx_vlan add id 0
+	testpmd> set fwd mac
+	testpmd> set verbose 1
+	testpmd> start
+
+3. Send packet from tester to VF0 with vlan tag(vlan id should same as rx_vlan)
+
+4. Stop VF0 testpmd and check VF0 can't receive vlan tag packet 
+
+5. Enable VLAN tag for VF0 from PF::
+	testpmd> set vf vlan tag 0 0 on
+
+6. Start VF0 testpmd
+
+7. Send packet from tester to VF0 with vlan tag(vlan id should same as rx_vlan)
+
+8. Stop VF0 testpmd and check VF0 can receive vlan tag packet
+
+9. Remove vlan id on VF0::
+	testpmd> rx_vlan rm id 0
+
+
+Test Case 12: Broadcast mode
+============================
+1. Start testpmd on VF0, set it in rxonly mode and enable verbose output::
+        testpmd> set fwd rxonly
+        testpmd> set verbose 1
+        testpmd> start
+
+2. Disable broadcast mode for VF from PF::
+        testpmd>set vf broadcast 0 0 off
+
+3. Send packets from tester with broadcast address,ff:ff:ff:ff:ff:ff, and check VF0 can not receive the packet
+
+4. Enable broadcast mode for VF from PF::
+        testpmd>set vf broadcast 0 0 on
+
+5. Send packets from tester with broadcast address,ff:ff:ff:ff:ff:ff, and check VF0 can receive the packet
+
+
+Test Case 13: Multicast mode
+====================================
+1. Start testpmd on VF0, set it in rxonly mode and enable verbose output::
+        testpmd> set fwd rxonly
+        testpmd> set verbose 1
+        testpmd> start
+
+2. Disable promisc and multicast mode for VF from PF::
+        testpmd>set vf promisc 0 0 off
+        testpmd>set vf allmulti 0 0 off
+
+3. Send packet from tester to VF0 with multicast MAC, and check VF0 can not receive the packet
+
+4. Enable multicast mode for VF from PF::
+        testpmd>set vf allmulti 0 0 on
+
+5. Send packet from tester to VF0 with multicast MAC, and check VF0 can receive the packet
+
+
+
+Test Case 14: Promisc mode
+==================================
+1. Start testpmd on VF0, set it in rxonly mode and enable verbose output::
+        testpmd> set fwd rxonly
+        testpmd> set verbose 1
+        testpmd> start
+
+2. Disable promisc mode for VF from PF::
+        testpmd>set vf promisc 0 0 off
+
+3. Send packet from tester to VF0 with random MAC, and check VF0 can not receive the packet
+
+4. Send packet from tester to VF0 with correct MAC, and check VF0 can receive the packet
+
+5. Enable promisc mode for VF from PF::
+        testpmd>set vf promisc 0 0 on
+
+6. Send packet from tester to VF0 with random MAC, and the packet can be received by VF0
+
+7. Send packet from tester to VF0 with correct MAC, and the packet can be received by VF0
+
+
+
-- 
2.5.5

^ permalink raw reply	[flat|nested] 5+ messages in thread
end of thread, other threads:[~2017-02-23  9:39 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-02-23  3:20 [dts] [PATCH] VF daemon DPDK PF+DPDK VF test plan Xueqin Lin
2017-02-23  9:32 ` Liu, Yong
  -- strict thread matches above, loose matches on Subject: below --
2017-02-22  1:17 Xueqin Lin
2017-02-23  5:05 ` Liu, Yong
2017-02-23  5:31   ` Lin, Xueqin

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).