* [dts] [PATCH] Add Cryptodev Unit Test Cases
@ 2017-03-08 0:40 Chen, Zhaoyan
0 siblings, 0 replies; 4+ messages in thread
From: Chen, Zhaoyan @ 2017-03-08 0:40 UTC (permalink / raw)
To: dts; +Cc: Chen, Zhaoyan
---
test_plans/unit_tests_cryptodev_test_plan.rst | 85 +++++++++++++
tests/TestSuite_unit_tests_cryptodev.py | 174 ++++++++++++++++++++++++++
2 files changed, 259 insertions(+)
create mode 100644 test_plans/unit_tests_cryptodev_test_plan.rst
create mode 100644 tests/TestSuite_unit_tests_cryptodev.py
diff --git a/test_plans/unit_tests_cryptodev_test_plan.rst b/test_plans/unit_tests_cryptodev_test_plan.rst
new file mode 100644
index 0000000..565def1
--- /dev/null
+++ b/test_plans/unit_tests_cryptodev_test_plan.rst
@@ -0,0 +1,85 @@
+.. Copyright (c) 2010,2011 Intel Corporation
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in
+ the documentation and/or other materials provided with the
+ distribution.
+
+ - Neither the name of Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived
+ from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ OF THE POSSIBILITY OF SUCH DAMAGE.
+
+==============================================
+Testing of Cryptodev Unit tests
+==============================================
+
+
+Description
+===========
+
+This document provides the plan for testing Cryptodev API via Cryptodev unit tests.
+Unit tests include supported Hardware and Software PMD(polling mode device) and supported algorithms.
+Cryptodev API provides ability to do encryption/decryption by integrating QAT(Intel� QuickAssist
+Technology) into DPDK. The QAT provides poll mode crypto driver support for
+Intel� QuickAssist Adapter 8950 hardware accelerator.
+
+The testing of Crytpodev API should be tested under either Intel QuickAssist Technology DH895xxC hardware
+accelerator or AES-NI library.
+
+This test suite will run all cryptodev related unit test cases. Alternatively, you could execute
+the unit tests manually by app/test DPDK application.
+
+Unit Test List
+==============
+
+- cryptodev_qat_autotest
+- cryptodev_qat_perftest
+- cryptodev_aesni_mb_perftest
+- cryptodev_sw_snow3g_perftest
+- cryptodev_qat_snow3g_perftest
+- cryptodev_aesni_gcm_perftest
+- cryptodev_openssl_perftest
+- cryptodev_qat_continual_perftest
+- cryptodev_aesni_mb_autotest
+- cryptodev_openssl_autotest
+- cryptodev_aesni_gcm_autotest
+- cryptodev_null_autotest
+- cryptodev_sw_snow3g_autotest
+- cryptodev_sw_kasumi_autotest
+- cryptodev_sw_zuc_autotest
+
+
+Test Case Setup
+===============
+
+1. Build DPDK and app/test app
+2. Bind cryptodev devices to igb_uio driver
+3. Manually verify the app/test by this command, as example, in your build folder
+* ./app/test -c 1 -n 1
+* RTE>> cryptodev_qat_autotest
+
+All Unit Test Cases are listed above.
+
+Expected all tests could pass in testing.
+
diff --git a/tests/TestSuite_unit_tests_cryptodev.py b/tests/TestSuite_unit_tests_cryptodev.py
new file mode 100644
index 0000000..356c22c
--- /dev/null
+++ b/tests/TestSuite_unit_tests_cryptodev.py
@@ -0,0 +1,174 @@
+# BSD LICENSE
+#
+# Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+import utils
+from test_case import TestCase
+
+
+class UnitTestsCryptodev(TestCase):
+
+ def set_up_all(self):
+
+ self.core_config = "1S/2C/1T"
+ self.number_of_ports = 1
+ self.dut_ports = self.dut.get_ports(self.nic)
+ self.verify(len(self.dut_ports) >= self.number_of_ports,
+ "Not enough ports for " + self.nic)
+ self.ports_socket = self.dut.get_numa_id(self.dut_ports[0])
+
+ self.logger.info("core config = " + self.core_config)
+ self.logger.info("number of ports = " + str(self.number_of_ports))
+ self.logger.info("dut ports = " + str(self.dut_ports))
+ self.logger.info("ports_socket = " + str(self.ports_socket))
+
+ self.core_mask = utils.create_mask(self.dut.get_core_list(
+ self.core_config,
+ socket=self.ports_socket))
+ self.port_mask = utils.create_mask([self.dut_ports[0]])
+
+ self.tx_port = self.tester.get_local_port(self.dut_ports[0])
+ self.rx_port = self.tester.get_local_port(self.dut_ports[0])
+
+ self.tx_interface = self.tester.get_interface(self.tx_port)
+ self.rx_interface = self.tester.get_interface(self.rx_port)
+
+ self.logger.info("core mask = " + self.core_mask)
+ self.logger.info("port mask = " + self.port_mask)
+ self.logger.info("tx interface = " + self.tx_interface)
+ self.logger.info("rx interface = " + self.rx_interface)
+
+ # Rebuild the dpdk with cryptodev pmds CONFIG_RTE_LIBRTE_PMD_ZUC=n
+ self.dut.send_expect("export AESNI_MULTI_BUFFER_LIB_PATH=/root/ipsec_043/code/", "#")
+ self.dut.send_expect("export LIBSSO_SNOW3G_PATH=/root/libsso_snow3g/snow3g/", "#")
+ self.dut.send_expect("export LIBSSO_ZUC_PATH=/root/libsso_zuc.1.0.1.1-8/zuc", "#")
+ self.dut.send_expect("export LIBSSO_KASUMI_PATH=/root/LibSSO_0_3_1/isg_cid-wireless_libs/ciphers/kasumi/", "#")
+ self.dut.send_expect("sed -i 's/CONFIG_RTE_LIBRTE_PMD_QAT=n$/CONFIG_RTE_LIBRTE_PMD_QAT=y/' config/common_base", "# ")
+ self.dut.send_expect("sed -i 's/CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=n$/CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=y/' config/common_base", "# ")
+ self.dut.send_expect("sed -i 's/CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO=n$/CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO=y/' config/common_base", "# ")
+ self.dut.send_expect("sed -i 's/CONFIG_RTE_LIBRTE_PMD_SNOW3G=n$/CONFIG_RTE_LIBRTE_PMD_SNOW3G=y/' config/common_base", "# ")
+ self.dut.send_expect("sed -i 's/CONFIG_RTE_LIBRTE_PMD_KASUMI=n$/CONFIG_RTE_LIBRTE_PMD_KASUMI=y/' config/common_base", "# ")
+ self.dut.send_expect("sed -i 's/CONFIG_RTE_LIBRTE_PMD_OPENSSL=n$/CONFIG_RTE_LIBRTE_PMD_OPENSSL=y/' config/common_base", "# ")
+ self.dut.send_expect("sed -i 's/CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n$/CONFIG_RTE_LIBRTE_PMD_AESNI_MB=y/' config/common_base", "# ")
+ self.dut.send_expect("sed -i 's/CONFIG_RTE_LIBRTE_PMD_ZUC=n$/CONFIG_RTE_LIBRTE_PMD_ZUC=y/' config/common_base", "# ")
+ self.dut.skip_setup = False
+ self.dut.build_install_dpdk(self.dut.target)
+
+ #out = self.dut.build_dpdk_apps("./app/test/")
+ #self.verify('make: Leaving directory' in out, "Compilation failed")
+
+
+ # Bind QAT VF devices
+ out = self.dut.send_expect("lspci -d:443|awk '{print $1}'", "# ", 10)
+ self.dut.send_expect('echo "8086 0443" > /sys/bus/pci/drivers/igb_uio/new_id', "# ", 10)
+ for line in out.replace("\r", "\n").replace("\n\n", "\n").split("\n"):
+ cmd = "echo 0000:{} > /sys/bus/pci/devices/0000\:{}/driver/unbind".format(line, line.replace(":", "\:"))
+ self.dut.send_expect(cmd, "# ", 10)
+ cmd = "echo 0000:{} > /sys/bus/pci/drivers/igb_uio/bind".format(line)
+ self.dut.send_expect(cmd, "# ", 10)
+
+ def set_up(self):
+ pass
+
+ def tear_down(self):
+ pass
+
+ def tear_down_all(self):
+ self.dut.send_expect("sed -i 's/CONFIG_RTE_LIBRTE_PMD_QAT=y$/CONFIG_RTE_LIBRTE_PMD_QAT=n/' config/common_base", "# ")
+ self.dut.send_expect("sed -i 's/CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=y$/CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=n/' config/common_base", "# ")
+ self.dut.send_expect("sed -i 's/CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO=y$/CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO=n/' config/common_base", "# ")
+ self.dut.send_expect("sed -i 's/CONFIG_RTE_LIBRTE_PMD_SNOW3G=y$/CONFIG_RTE_LIBRTE_PMD_SNOW3G=n/' config/common_base", "# ")
+ self.dut.send_expect("sed -i 's/CONFIG_RTE_LIBRTE_PMD_KASUMI=y$/CONFIG_RTE_LIBRTE_PMD_KASUMI=n/' config/common_base", "# ")
+ self.dut.send_expect("sed -i 's/CONFIG_RTE_LIBRTE_PMD_OPENSSL=y$/CONFIG_RTE_LIBRTE_PMD_OPENSSL=n/' config/common_base", "# ")
+ self.dut.send_expect("sed -i 's/CONFIG_RTE_LIBRTE_PMD_AESNI_MB=y$/CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n/' config/common_base", "# ")
+ self.dut.send_expect("sed -i 's/CONFIG_RTE_LIBRTE_PMD_ZUC=y$/CONFIG_RTE_LIBRTE_PMD_ZUC=n/' config/common_base", "# ")
+
+ def test_cryptodev_qat_autotest(self):
+ self.__run_unit_test("cryptodev_qat_autotest")
+
+ def test_cryptodev_qat_perftest(self):
+ self.__run_unit_test("cryptodev_qat_perftest")
+
+ def test_cryptodev_aesni_mb_perftest(self):
+ self.__run_unit_test("cryptodev_aesni_mb_perftest")
+
+ def test_cryptodev_sw_snow3g_perftest(self):
+ self.__run_unit_test("cryptodev_sw_snow3g_perftest")
+
+ def test_cryptodev_qat_snow3g_perftest(self):
+ self.__run_unit_test("cryptodev_qat_snow3g_perftest")
+
+ def test_cryptodev_aesni_gcm_perftest(self):
+ self.__run_unit_test("cryptodev_aesni_gcm_perftest")
+
+ def test_cryptodev_openssl_perftest(self):
+ self.__run_unit_test("cryptodev_openssl_perftest")
+
+ def test_cryptodev_qat_continual_perftest(self):
+ self.__run_unit_test("cryptodev_qat_continual_perftest")
+
+ def test_cryptodev_aesni_mb_autotest(self):
+ self.__run_unit_test("cryptodev_aesni_mb_autotest")
+
+ def test_cryptodev_openssl_autotest(self):
+ self.__run_unit_test("cryptodev_openssl_autotest")
+
+ def test_cryptodev_aesni_gcm_autotest(self):
+ self.__run_unit_test("cryptodev_aesni_gcm_autotest")
+
+ def test_cryptodev_null_autotest(self):
+ self.__run_unit_test("cryptodev_null_autotest")
+
+ def test_cryptodev_sw_snow3g_autotest(self):
+ self.__run_unit_test("cryptodev_sw_snow3g_autotest")
+
+ def test_cryptodev_sw_kasumi_autotest(self):
+ self.__run_unit_test("cryptodev_sw_kasumi_autotest")
+
+ def test_cryptodev_sw_zuc_autotest(self):
+ self.__run_unit_test("cryptodev_sw_zuc_autotest")
+
+ def __run_unit_test(self, testsuite, timeout=600):
+ print "STEP_TEST: " + testsuite
+ self.dut.send_expect("dmesg -C", "# ", 30)
+ self.dut.send_expect("./{target}/app/test -n 1 -c 0xf".format(target=self.dut.target), "RTE>>", 30)
+ out = ""
+ try:
+ out = self.dut.send_expect(testsuite, "RTE>>", timeout)
+ self.dut.send_expect("quit", "# ", 30)
+ except Exception, ex:
+ print ex
+ print "run cryptodev_unit_tests process coredump"
+ self.dut.alt_session.send_expect("killall test", "# ", 30)
+ dmesg = self.dut.alt_session.send_expect("dmesg", "# ", 30)
+ print dmesg
+ print out
+ self.verify("Test OK" in out, "Test Failed")
+
--
1.9.3
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [dts] [PATCH] Add Cryptodev Unit Test Cases
2017-03-08 1:54 ` Liu, Yong
@ 2017-03-08 1:59 ` Chen, Zhaoyan
0 siblings, 0 replies; 4+ messages in thread
From: Chen, Zhaoyan @ 2017-03-08 1:59 UTC (permalink / raw)
To: Liu, Yong, dts
Thanks for review. Yong.
> -----Original Message-----
> From: Liu, Yong
> Sent: Wednesday, March 8, 2017 9:54 AM
> To: Chen, Zhaoyan <zhaoyan.chen@intel.com>; dts@dpdk.org
> Cc: Chen, Zhaoyan <zhaoyan.chen@intel.com>
> Subject: RE: [dts] [PATCH] Add Cryptodev Unit Test Cases
>
> Zhaoyan,
> Few comments below.
>
> > -----Original Message-----
> > From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of Chen, Zhaoyan
> > Sent: Wednesday, March 08, 2017 8:22 AM
> > To: dts@dpdk.org
> > Cc: Chen, Zhaoyan <zhaoyan.chen@intel.com>
> > Subject: [dts] [PATCH] Add Cryptodev Unit Test Cases
> >
> > ---
> > test_plans/unit_tests_cryptodev_test_plan.rst | 85 +++++++++++++
> > tests/TestSuite_unit_tests_cryptodev.py | 174
> > ++++++++++++++++++++++++++
> > 2 files changed, 259 insertions(+)
> > create mode 100644 test_plans/unit_tests_cryptodev_test_plan.rst
> > create mode 100644 tests/TestSuite_unit_tests_cryptodev.py
> >
> > diff --git a/test_plans/unit_tests_cryptodev_test_plan.rst
> > b/test_plans/unit_tests_cryptodev_test_plan.rst
> > new file mode 100644
> > index 0000000..565def1
> > --- /dev/null
> > +++ b/test_plans/unit_tests_cryptodev_test_plan.rst
> > @@ -0,0 +1,85 @@
> > +.. Copyright (c) 2010,2011 Intel Corporation
>
> Please update copyright end year to 2017.
>
> > + All rights reserved.
> > +
> > + Redistribution and use in source and binary forms, with or without
> > + modification, are permitted provided that the following conditions
> > + are met:
> > +
> > + - Redistributions of source code must retain the above copyright
> > + notice, this list of conditions and the following disclaimer.
> > +
> > + - Redistributions in binary form must reproduce the above copyright
> > + notice, this list of conditions and the following disclaimer in
> > + the documentation and/or other materials provided with the
> > + distribution.
> > +
> > + - Neither the name of Intel Corporation nor the names of its
> > + contributors may be used to endorse or promote products derived
> > + from this software without specific prior written permission.
> > +
> > + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS
> > + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT
> NOT
> > + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> FITNESS
> > + FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> > + COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
> INDIRECT,
> > + INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> > + (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
> GOODS OR
> > + SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
> INTERRUPTION)
> > + HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
> CONTRACT,
> > + STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
> > + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
> ADVISED
> > + OF THE POSSIBILITY OF SUCH DAMAGE.
> > +
> > +==============================================
> > +Testing of Cryptodev Unit tests
> > +==============================================
> > +
> > +
> > +Description
> > +===========
> > +
> > +This document provides the plan for testing Cryptodev API via
> > +Cryptodev
> > unit tests.
> > +Unit tests include supported Hardware and Software PMD(polling mode
> > device) and supported algorithms.
> > +Cryptodev API provides ability to do encryption/decryption by
> > +integrating
> > QAT(Intel QuickAssist
>
> Please use @ for copyright.
>
> > +Technology) into DPDK. The QAT provides poll mode crypto driver
> > +support
> > for
> > +Intel QuickAssist Adapter 8950 hardware accelerator.
> > +
> > +The testing of Crytpodev API should be tested under either Intel
> > QuickAssist Technology DH895xxC hardware
> > +accelerator or AES-NI library.
> > +
> > +This test suite will run all cryptodev related unit test cases.
> > Alternatively, you could execute
> > +the unit tests manually by app/test DPDK application.
> > +
> > +Unit Test List
> > +==============
> > +
> > +- cryptodev_qat_autotest
> > +- cryptodev_qat_perftest
> > +- cryptodev_aesni_mb_perftest
> > +- cryptodev_sw_snow3g_perftest
> > +- cryptodev_qat_snow3g_perftest
> > +- cryptodev_aesni_gcm_perftest
> > +- cryptodev_openssl_perftest
> > +- cryptodev_qat_continual_perftest
> > +- cryptodev_aesni_mb_autotest
> > +- cryptodev_openssl_autotest
> > +- cryptodev_aesni_gcm_autotest
> > +- cryptodev_null_autotest
> > +- cryptodev_sw_snow3g_autotest
> > +- cryptodev_sw_kasumi_autotest
> > +- cryptodev_sw_zuc_autotest
> > +
> > +
> > +Test Case Setup
> > +===============
> > +
> > +1. Build DPDK and app/test app
> > +2. Bind cryptodev devices to igb_uio driver 3. Manually verify the
> > +app/test by this command, as example, in your
> > build folder
> > +* ./app/test -c 1 -n 1
> > +* RTE>> cryptodev_qat_autotest
> > +
> > +All Unit Test Cases are listed above.
> > +
> > +Expected all tests could pass in testing.
> > +
> > diff --git a/tests/TestSuite_unit_tests_cryptodev.py
> > b/tests/TestSuite_unit_tests_cryptodev.py
> > new file mode 100644
> > index 0000000..356c22c
> > --- /dev/null
> > +++ b/tests/TestSuite_unit_tests_cryptodev.py
> > @@ -0,0 +1,174 @@
> > +# BSD LICENSE
> > +#
> > +# Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
> > +# All rights reserved.
> > +#
> > +# Redistribution and use in source and binary forms, with or without
> > +# modification, are permitted provided that the following conditions
> > +# are met:
> > +#
> > +# * Redistributions of source code must retain the above copyright
> > +# notice, this list of conditions and the following disclaimer.
> > +# * Redistributions in binary form must reproduce the above copyright
> > +# notice, this list of conditions and the following disclaimer in
> > +# the documentation and/or other materials provided with the
> > +# distribution.
> > +# * Neither the name of Intel Corporation nor the names of its
> > +# contributors may be used to endorse or promote products derived
> > +# from this software without specific prior written permission.
> > +#
> > +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS
> > +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT
> NOT #
> > +LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> FITNESS FOR
> > +# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> > +COPYRIGHT # OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
> INDIRECT,
> > +INCIDENTAL, # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> > +(INCLUDING, BUT NOT # LIMITED TO, PROCUREMENT OF SUBSTITUTE
> GOODS OR
> > +SERVICES; LOSS OF USE, # DATA, OR PROFITS; OR BUSINESS
> INTERRUPTION)
> > +HOWEVER CAUSED AND ON ANY # THEORY OF LIABILITY, WHETHER IN
> CONTRACT,
> > +STRICT LIABILITY, OR TORT # (INCLUDING NEGLIGENCE OR OTHERWISE)
> > +ARISING IN ANY WAY OUT OF THE USE # OF THIS SOFTWARE, EVEN IF
> ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> > +
> > +import utils
> > +from test_case import TestCase
> > +
> > +
> > +class UnitTestsCryptodev(TestCase):
> > +
> > + def set_up_all(self):
> > +
> > + self.core_config = "1S/2C/1T"
> > + self.number_of_ports = 1
> > + self.dut_ports = self.dut.get_ports(self.nic)
> > + self.verify(len(self.dut_ports) >= self.number_of_ports,
> > + "Not enough ports for " + self.nic)
> > + self.ports_socket = self.dut.get_numa_id(self.dut_ports[0])
> > +
> > + self.logger.info("core config = " + self.core_config)
> > + self.logger.info("number of ports = " + str(self.number_of_ports))
> > + self.logger.info("dut ports = " + str(self.dut_ports))
> > + self.logger.info("ports_socket = " + str(self.ports_socket))
> > +
> > + self.core_mask = utils.create_mask(self.dut.get_core_list(
> > + self.core_config,
> > + socket=self.ports_socket))
> > + self.port_mask = utils.create_mask([self.dut_ports[0]])
> > +
> > + self.tx_port = self.tester.get_local_port(self.dut_ports[0])
> > + self.rx_port = self.tester.get_local_port(self.dut_ports[0])
> > +
> > + self.tx_interface = self.tester.get_interface(self.tx_port)
> > + self.rx_interface = self.tester.get_interface(self.rx_port)
> > +
> > + self.logger.info("core mask = " + self.core_mask)
> > + self.logger.info("port mask = " + self.port_mask)
> > + self.logger.info("tx interface = " + self.tx_interface)
> > + self.logger.info("rx interface = " + self.rx_interface)
> > +
> > + # Rebuild the dpdk with cryptodev pmds
> > CONFIG_RTE_LIBRTE_PMD_ZUC=n
> > + self.dut.send_expect("export
> > AESNI_MULTI_BUFFER_LIB_PATH=/root/ipsec_043/code/", "#")
> > + self.dut.send_expect("export
> > LIBSSO_SNOW3G_PATH=/root/libsso_snow3g/snow3g/", "#")
> > + self.dut.send_expect("export
> > LIBSSO_ZUC_PATH=/root/libsso_zuc.1.0.1.1-8/zuc", "#")
> > + self.dut.send_expect("export
> > LIBSSO_KASUMI_PATH=/root/LibSSO_0_3_1/isg_cid-
> > wireless_libs/ciphers/kasumi/", "#")
> > + self.dut.send_expect("sed -i
> >
> 's/CONFIG_RTE_LIBRTE_PMD_QAT=n$/CONFIG_RTE_LIBRTE_PMD_QAT=y/'
> > config/common_base", "# ")
> > + self.dut.send_expect("sed -i
> >
> 's/CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=n$/CONFIG_RTE_LIBRTE_PMD_
> AESNI_GCM=y/'
> > config/common_base", "# ")
> > + self.dut.send_expect("sed -i
> >
> 's/CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO=n$/CONFIG_RTE_LIBRTE_PMD
> _NULL_CRY
> > PTO=
> > y/' config/common_base", "# ")
> > + self.dut.send_expect("sed -i
> >
> 's/CONFIG_RTE_LIBRTE_PMD_SNOW3G=n$/CONFIG_RTE_LIBRTE_PMD_SN
> OW3G=y/'
> > config/common_base", "# ")
> > + self.dut.send_expect("sed -i
> >
> 's/CONFIG_RTE_LIBRTE_PMD_KASUMI=n$/CONFIG_RTE_LIBRTE_PMD_KAS
> UMI=y/'
> > config/common_base", "# ")
> > + self.dut.send_expect("sed -i
> >
> 's/CONFIG_RTE_LIBRTE_PMD_OPENSSL=n$/CONFIG_RTE_LIBRTE_PMD_OPE
> NSSL=y/'
> > config/common_base", "# ")
> > + self.dut.send_expect("sed -i
> >
> 's/CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n$/CONFIG_RTE_LIBRTE_PMD_A
> ESNI_MB=y/'
> > config/common_base", "# ")
> > + self.dut.send_expect("sed -i
> >
> 's/CONFIG_RTE_LIBRTE_PMD_ZUC=n$/CONFIG_RTE_LIBRTE_PMD_ZUC=y/'
> > config/common_base", "# ")
> > + self.dut.skip_setup = False
> > + self.dut.build_install_dpdk(self.dut.target)
> > +
> > + #out = self.dut.build_dpdk_apps("./app/test/")
> > + #self.verify('make: Leaving directory' in out, "Compilation
> > failed")
> > +
> > +
> > + # Bind QAT VF devices
> > + out = self.dut.send_expect("lspci -d:443|awk '{print $1}'",
> > + "# ",
> > 10)
> > + self.dut.send_expect('echo "8086 0443" >
> > /sys/bus/pci/drivers/igb_uio/new_id', "# ", 10)
> > + for line in out.replace("\r", "\n").replace("\n\n",
> > "\n").split("\n"):
> > + cmd = "echo 0000:{} >
> > /sys/bus/pci/devices/0000\:{}/driver/unbind".format(line,
> > line.replace(":",
> > "\:"))
> > + self.dut.send_expect(cmd, "# ", 10)
> > + cmd = "echo 0000:{} >
> > /sys/bus/pci/drivers/igb_uio/bind".format(line)
> > + self.dut.send_expect(cmd, "# ", 10)
> > +
> > + def set_up(self):
> > + pass
> > +
> > + def tear_down(self):
> > + pass
> > +
> > + def tear_down_all(self):
> > + self.dut.send_expect("sed -i
> >
> 's/CONFIG_RTE_LIBRTE_PMD_QAT=y$/CONFIG_RTE_LIBRTE_PMD_QAT=n/'
> > config/common_base", "# ")
> > + self.dut.send_expect("sed -i
> >
> 's/CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=y$/CONFIG_RTE_LIBRTE_PMD_
> AESNI_GCM=n/'
> > config/common_base", "# ")
> > + self.dut.send_expect("sed -i
> >
> 's/CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO=y$/CONFIG_RTE_LIBRTE_PMD
> _NULL_CRY
> > PTO=
> > n/' config/common_base", "# ")
> > + self.dut.send_expect("sed -i
> >
> 's/CONFIG_RTE_LIBRTE_PMD_SNOW3G=y$/CONFIG_RTE_LIBRTE_PMD_SN
> OW3G=n/'
> > config/common_base", "# ")
> > + self.dut.send_expect("sed -i
> >
> 's/CONFIG_RTE_LIBRTE_PMD_KASUMI=y$/CONFIG_RTE_LIBRTE_PMD_KAS
> UMI=n/'
> > config/common_base", "# ")
> > + self.dut.send_expect("sed -i
> >
> 's/CONFIG_RTE_LIBRTE_PMD_OPENSSL=y$/CONFIG_RTE_LIBRTE_PMD_OPE
> NSSL=n/'
> > config/common_base", "# ")
> > + self.dut.send_expect("sed -i
> >
> 's/CONFIG_RTE_LIBRTE_PMD_AESNI_MB=y$/CONFIG_RTE_LIBRTE_PMD_A
> ESNI_MB=n/'
> > config/common_base", "# ")
> > + self.dut.send_expect("sed -i
> >
> 's/CONFIG_RTE_LIBRTE_PMD_ZUC=y$/CONFIG_RTE_LIBRTE_PMD_ZUC=n/'
> > config/common_base", "# ")
> > +
> > + def test_cryptodev_qat_autotest(self):
> > + self.__run_unit_test("cryptodev_qat_autotest")
> > +
> > + def test_cryptodev_qat_perftest(self):
> > + self.__run_unit_test("cryptodev_qat_perftest")
> > +
> > + def test_cryptodev_aesni_mb_perftest(self):
> > + self.__run_unit_test("cryptodev_aesni_mb_perftest")
> > +
> > + def test_cryptodev_sw_snow3g_perftest(self):
> > + self.__run_unit_test("cryptodev_sw_snow3g_perftest")
> > +
> > + def test_cryptodev_qat_snow3g_perftest(self):
> > + self.__run_unit_test("cryptodev_qat_snow3g_perftest")
> > +
> > + def test_cryptodev_aesni_gcm_perftest(self):
> > + self.__run_unit_test("cryptodev_aesni_gcm_perftest")
> > +
> > + def test_cryptodev_openssl_perftest(self):
> > + self.__run_unit_test("cryptodev_openssl_perftest")
> > +
> > + def test_cryptodev_qat_continual_perftest(self):
> > + self.__run_unit_test("cryptodev_qat_continual_perftest")
> > +
> > + def test_cryptodev_aesni_mb_autotest(self):
> > + self.__run_unit_test("cryptodev_aesni_mb_autotest")
> > +
> > + def test_cryptodev_openssl_autotest(self):
> > + self.__run_unit_test("cryptodev_openssl_autotest")
> > +
> > + def test_cryptodev_aesni_gcm_autotest(self):
> > + self.__run_unit_test("cryptodev_aesni_gcm_autotest")
> > +
> > + def test_cryptodev_null_autotest(self):
> > + self.__run_unit_test("cryptodev_null_autotest")
> > +
> > + def test_cryptodev_sw_snow3g_autotest(self):
> > + self.__run_unit_test("cryptodev_sw_snow3g_autotest")
> > +
> > + def test_cryptodev_sw_kasumi_autotest(self):
> > + self.__run_unit_test("cryptodev_sw_kasumi_autotest")
> > +
> > + def test_cryptodev_sw_zuc_autotest(self):
> > + self.__run_unit_test("cryptodev_sw_zuc_autotest")
> > +
> > + def __run_unit_test(self, testsuite, timeout=600):
> > + print "STEP_TEST: " + testsuite
> > + self.dut.send_expect("dmesg -C", "# ", 30)
> > + self.dut.send_expect("./{target}/app/test -n 1 -c
> > 0xf".format(target=self.dut.target), "RTE>>", 30)
> > + out = ""
> > + try:
> > + out = self.dut.send_expect(testsuite, "RTE>>", timeout)
> > + self.dut.send_expect("quit", "# ", 30)
> > + except Exception, ex:
> > + print ex
> > + print "run cryptodev_unit_tests process coredump"
> > + self.dut.alt_session.send_expect("killall test", "# ", 30)
> > + dmesg = self.dut.alt_session.send_expect("dmesg", "# ", 30)
> > + print dmesg
> > + print out
> > + self.verify("Test OK" in out, "Test Failed")
> > +
> > --
> > 1.9.3
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [dts] [PATCH] Add Cryptodev Unit Test Cases
2017-03-08 0:22 Chen, Zhaoyan
@ 2017-03-08 1:54 ` Liu, Yong
2017-03-08 1:59 ` Chen, Zhaoyan
0 siblings, 1 reply; 4+ messages in thread
From: Liu, Yong @ 2017-03-08 1:54 UTC (permalink / raw)
To: Chen, Zhaoyan, dts; +Cc: Chen, Zhaoyan
Zhaoyan,
Few comments below.
> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of Chen, Zhaoyan
> Sent: Wednesday, March 08, 2017 8:22 AM
> To: dts@dpdk.org
> Cc: Chen, Zhaoyan <zhaoyan.chen@intel.com>
> Subject: [dts] [PATCH] Add Cryptodev Unit Test Cases
>
> ---
> test_plans/unit_tests_cryptodev_test_plan.rst | 85 +++++++++++++
> tests/TestSuite_unit_tests_cryptodev.py | 174
> ++++++++++++++++++++++++++
> 2 files changed, 259 insertions(+)
> create mode 100644 test_plans/unit_tests_cryptodev_test_plan.rst
> create mode 100644 tests/TestSuite_unit_tests_cryptodev.py
>
> diff --git a/test_plans/unit_tests_cryptodev_test_plan.rst
> b/test_plans/unit_tests_cryptodev_test_plan.rst
> new file mode 100644
> index 0000000..565def1
> --- /dev/null
> +++ b/test_plans/unit_tests_cryptodev_test_plan.rst
> @@ -0,0 +1,85 @@
> +.. Copyright (c) 2010,2011 Intel Corporation
Please update copyright end year to 2017.
> + All rights reserved.
> +
> + Redistribution and use in source and binary forms, with or without
> + modification, are permitted provided that the following conditions
> + are met:
> +
> + - Redistributions of source code must retain the above copyright
> + notice, this list of conditions and the following disclaimer.
> +
> + - Redistributions in binary form must reproduce the above copyright
> + notice, this list of conditions and the following disclaimer in
> + the documentation and/or other materials provided with the
> + distribution.
> +
> + - Neither the name of Intel Corporation nor the names of its
> + contributors may be used to endorse or promote products derived
> + from this software without specific prior written permission.
> +
> + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
> + FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> + COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
> + INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> + (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
> + SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
> + HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
> + STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
> + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
> + OF THE POSSIBILITY OF SUCH DAMAGE.
> +
> +==============================================
> +Testing of Cryptodev Unit tests
> +==============================================
> +
> +
> +Description
> +===========
> +
> +This document provides the plan for testing Cryptodev API via Cryptodev
> unit tests.
> +Unit tests include supported Hardware and Software PMD(polling mode
> device) and supported algorithms.
> +Cryptodev API provides ability to do encryption/decryption by integrating
> QAT(Intel� QuickAssist
Please use @ for copyright.
> +Technology) into DPDK. The QAT provides poll mode crypto driver support
> for
> +Intel� QuickAssist Adapter 8950 hardware accelerator.
> +
> +The testing of Crytpodev API should be tested under either Intel
> QuickAssist Technology DH895xxC hardware
> +accelerator or AES-NI library.
> +
> +This test suite will run all cryptodev related unit test cases.
> Alternatively, you could execute
> +the unit tests manually by app/test DPDK application.
> +
> +Unit Test List
> +==============
> +
> +- cryptodev_qat_autotest
> +- cryptodev_qat_perftest
> +- cryptodev_aesni_mb_perftest
> +- cryptodev_sw_snow3g_perftest
> +- cryptodev_qat_snow3g_perftest
> +- cryptodev_aesni_gcm_perftest
> +- cryptodev_openssl_perftest
> +- cryptodev_qat_continual_perftest
> +- cryptodev_aesni_mb_autotest
> +- cryptodev_openssl_autotest
> +- cryptodev_aesni_gcm_autotest
> +- cryptodev_null_autotest
> +- cryptodev_sw_snow3g_autotest
> +- cryptodev_sw_kasumi_autotest
> +- cryptodev_sw_zuc_autotest
> +
> +
> +Test Case Setup
> +===============
> +
> +1. Build DPDK and app/test app
> +2. Bind cryptodev devices to igb_uio driver
> +3. Manually verify the app/test by this command, as example, in your
> build folder
> +* ./app/test -c 1 -n 1
> +* RTE>> cryptodev_qat_autotest
> +
> +All Unit Test Cases are listed above.
> +
> +Expected all tests could pass in testing.
> +
> diff --git a/tests/TestSuite_unit_tests_cryptodev.py
> b/tests/TestSuite_unit_tests_cryptodev.py
> new file mode 100644
> index 0000000..356c22c
> --- /dev/null
> +++ b/tests/TestSuite_unit_tests_cryptodev.py
> @@ -0,0 +1,174 @@
> +# BSD LICENSE
> +#
> +# Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
> +# All rights reserved.
> +#
> +# Redistribution and use in source and binary forms, with or without
> +# modification, are permitted provided that the following conditions
> +# are met:
> +#
> +# * Redistributions of source code must retain the above copyright
> +# notice, this list of conditions and the following disclaimer.
> +# * Redistributions in binary form must reproduce the above copyright
> +# notice, this list of conditions and the following disclaimer in
> +# the documentation and/or other materials provided with the
> +# distribution.
> +# * Neither the name of Intel Corporation nor the names of its
> +# contributors may be used to endorse or promote products derived
> +# from this software without specific prior written permission.
> +#
> +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
> +# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> +# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> +# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> +# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> +# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> +# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> +# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> +
> +import utils
> +from test_case import TestCase
> +
> +
> +class UnitTestsCryptodev(TestCase):
> +
> + def set_up_all(self):
> +
> + self.core_config = "1S/2C/1T"
> + self.number_of_ports = 1
> + self.dut_ports = self.dut.get_ports(self.nic)
> + self.verify(len(self.dut_ports) >= self.number_of_ports,
> + "Not enough ports for " + self.nic)
> + self.ports_socket = self.dut.get_numa_id(self.dut_ports[0])
> +
> + self.logger.info("core config = " + self.core_config)
> + self.logger.info("number of ports = " + str(self.number_of_ports))
> + self.logger.info("dut ports = " + str(self.dut_ports))
> + self.logger.info("ports_socket = " + str(self.ports_socket))
> +
> + self.core_mask = utils.create_mask(self.dut.get_core_list(
> + self.core_config,
> + socket=self.ports_socket))
> + self.port_mask = utils.create_mask([self.dut_ports[0]])
> +
> + self.tx_port = self.tester.get_local_port(self.dut_ports[0])
> + self.rx_port = self.tester.get_local_port(self.dut_ports[0])
> +
> + self.tx_interface = self.tester.get_interface(self.tx_port)
> + self.rx_interface = self.tester.get_interface(self.rx_port)
> +
> + self.logger.info("core mask = " + self.core_mask)
> + self.logger.info("port mask = " + self.port_mask)
> + self.logger.info("tx interface = " + self.tx_interface)
> + self.logger.info("rx interface = " + self.rx_interface)
> +
> + # Rebuild the dpdk with cryptodev pmds
> CONFIG_RTE_LIBRTE_PMD_ZUC=n
> + self.dut.send_expect("export
> AESNI_MULTI_BUFFER_LIB_PATH=/root/ipsec_043/code/", "#")
> + self.dut.send_expect("export
> LIBSSO_SNOW3G_PATH=/root/libsso_snow3g/snow3g/", "#")
> + self.dut.send_expect("export
> LIBSSO_ZUC_PATH=/root/libsso_zuc.1.0.1.1-8/zuc", "#")
> + self.dut.send_expect("export
> LIBSSO_KASUMI_PATH=/root/LibSSO_0_3_1/isg_cid-
> wireless_libs/ciphers/kasumi/", "#")
> + self.dut.send_expect("sed -i
> 's/CONFIG_RTE_LIBRTE_PMD_QAT=n$/CONFIG_RTE_LIBRTE_PMD_QAT=y/'
> config/common_base", "# ")
> + self.dut.send_expect("sed -i
> 's/CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=n$/CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=y/'
> config/common_base", "# ")
> + self.dut.send_expect("sed -i
> 's/CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO=n$/CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO=
> y/' config/common_base", "# ")
> + self.dut.send_expect("sed -i
> 's/CONFIG_RTE_LIBRTE_PMD_SNOW3G=n$/CONFIG_RTE_LIBRTE_PMD_SNOW3G=y/'
> config/common_base", "# ")
> + self.dut.send_expect("sed -i
> 's/CONFIG_RTE_LIBRTE_PMD_KASUMI=n$/CONFIG_RTE_LIBRTE_PMD_KASUMI=y/'
> config/common_base", "# ")
> + self.dut.send_expect("sed -i
> 's/CONFIG_RTE_LIBRTE_PMD_OPENSSL=n$/CONFIG_RTE_LIBRTE_PMD_OPENSSL=y/'
> config/common_base", "# ")
> + self.dut.send_expect("sed -i
> 's/CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n$/CONFIG_RTE_LIBRTE_PMD_AESNI_MB=y/'
> config/common_base", "# ")
> + self.dut.send_expect("sed -i
> 's/CONFIG_RTE_LIBRTE_PMD_ZUC=n$/CONFIG_RTE_LIBRTE_PMD_ZUC=y/'
> config/common_base", "# ")
> + self.dut.skip_setup = False
> + self.dut.build_install_dpdk(self.dut.target)
> +
> + #out = self.dut.build_dpdk_apps("./app/test/")
> + #self.verify('make: Leaving directory' in out, "Compilation
> failed")
> +
> +
> + # Bind QAT VF devices
> + out = self.dut.send_expect("lspci -d:443|awk '{print $1}'", "# ",
> 10)
> + self.dut.send_expect('echo "8086 0443" >
> /sys/bus/pci/drivers/igb_uio/new_id', "# ", 10)
> + for line in out.replace("\r", "\n").replace("\n\n",
> "\n").split("\n"):
> + cmd = "echo 0000:{} >
> /sys/bus/pci/devices/0000\:{}/driver/unbind".format(line, line.replace(":",
> "\:"))
> + self.dut.send_expect(cmd, "# ", 10)
> + cmd = "echo 0000:{} >
> /sys/bus/pci/drivers/igb_uio/bind".format(line)
> + self.dut.send_expect(cmd, "# ", 10)
> +
> + def set_up(self):
> + pass
> +
> + def tear_down(self):
> + pass
> +
> + def tear_down_all(self):
> + self.dut.send_expect("sed -i
> 's/CONFIG_RTE_LIBRTE_PMD_QAT=y$/CONFIG_RTE_LIBRTE_PMD_QAT=n/'
> config/common_base", "# ")
> + self.dut.send_expect("sed -i
> 's/CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=y$/CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=n/'
> config/common_base", "# ")
> + self.dut.send_expect("sed -i
> 's/CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO=y$/CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO=
> n/' config/common_base", "# ")
> + self.dut.send_expect("sed -i
> 's/CONFIG_RTE_LIBRTE_PMD_SNOW3G=y$/CONFIG_RTE_LIBRTE_PMD_SNOW3G=n/'
> config/common_base", "# ")
> + self.dut.send_expect("sed -i
> 's/CONFIG_RTE_LIBRTE_PMD_KASUMI=y$/CONFIG_RTE_LIBRTE_PMD_KASUMI=n/'
> config/common_base", "# ")
> + self.dut.send_expect("sed -i
> 's/CONFIG_RTE_LIBRTE_PMD_OPENSSL=y$/CONFIG_RTE_LIBRTE_PMD_OPENSSL=n/'
> config/common_base", "# ")
> + self.dut.send_expect("sed -i
> 's/CONFIG_RTE_LIBRTE_PMD_AESNI_MB=y$/CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n/'
> config/common_base", "# ")
> + self.dut.send_expect("sed -i
> 's/CONFIG_RTE_LIBRTE_PMD_ZUC=y$/CONFIG_RTE_LIBRTE_PMD_ZUC=n/'
> config/common_base", "# ")
> +
> + def test_cryptodev_qat_autotest(self):
> + self.__run_unit_test("cryptodev_qat_autotest")
> +
> + def test_cryptodev_qat_perftest(self):
> + self.__run_unit_test("cryptodev_qat_perftest")
> +
> + def test_cryptodev_aesni_mb_perftest(self):
> + self.__run_unit_test("cryptodev_aesni_mb_perftest")
> +
> + def test_cryptodev_sw_snow3g_perftest(self):
> + self.__run_unit_test("cryptodev_sw_snow3g_perftest")
> +
> + def test_cryptodev_qat_snow3g_perftest(self):
> + self.__run_unit_test("cryptodev_qat_snow3g_perftest")
> +
> + def test_cryptodev_aesni_gcm_perftest(self):
> + self.__run_unit_test("cryptodev_aesni_gcm_perftest")
> +
> + def test_cryptodev_openssl_perftest(self):
> + self.__run_unit_test("cryptodev_openssl_perftest")
> +
> + def test_cryptodev_qat_continual_perftest(self):
> + self.__run_unit_test("cryptodev_qat_continual_perftest")
> +
> + def test_cryptodev_aesni_mb_autotest(self):
> + self.__run_unit_test("cryptodev_aesni_mb_autotest")
> +
> + def test_cryptodev_openssl_autotest(self):
> + self.__run_unit_test("cryptodev_openssl_autotest")
> +
> + def test_cryptodev_aesni_gcm_autotest(self):
> + self.__run_unit_test("cryptodev_aesni_gcm_autotest")
> +
> + def test_cryptodev_null_autotest(self):
> + self.__run_unit_test("cryptodev_null_autotest")
> +
> + def test_cryptodev_sw_snow3g_autotest(self):
> + self.__run_unit_test("cryptodev_sw_snow3g_autotest")
> +
> + def test_cryptodev_sw_kasumi_autotest(self):
> + self.__run_unit_test("cryptodev_sw_kasumi_autotest")
> +
> + def test_cryptodev_sw_zuc_autotest(self):
> + self.__run_unit_test("cryptodev_sw_zuc_autotest")
> +
> + def __run_unit_test(self, testsuite, timeout=600):
> + print "STEP_TEST: " + testsuite
> + self.dut.send_expect("dmesg -C", "# ", 30)
> + self.dut.send_expect("./{target}/app/test -n 1 -c
> 0xf".format(target=self.dut.target), "RTE>>", 30)
> + out = ""
> + try:
> + out = self.dut.send_expect(testsuite, "RTE>>", timeout)
> + self.dut.send_expect("quit", "# ", 30)
> + except Exception, ex:
> + print ex
> + print "run cryptodev_unit_tests process coredump"
> + self.dut.alt_session.send_expect("killall test", "# ", 30)
> + dmesg = self.dut.alt_session.send_expect("dmesg", "# ", 30)
> + print dmesg
> + print out
> + self.verify("Test OK" in out, "Test Failed")
> +
> --
> 1.9.3
^ permalink raw reply [flat|nested] 4+ messages in thread
* [dts] [PATCH] Add Cryptodev Unit Test Cases
@ 2017-03-08 0:22 Chen, Zhaoyan
2017-03-08 1:54 ` Liu, Yong
0 siblings, 1 reply; 4+ messages in thread
From: Chen, Zhaoyan @ 2017-03-08 0:22 UTC (permalink / raw)
To: dts; +Cc: Chen, Zhaoyan
---
test_plans/unit_tests_cryptodev_test_plan.rst | 85 +++++++++++++
tests/TestSuite_unit_tests_cryptodev.py | 174 ++++++++++++++++++++++++++
2 files changed, 259 insertions(+)
create mode 100644 test_plans/unit_tests_cryptodev_test_plan.rst
create mode 100644 tests/TestSuite_unit_tests_cryptodev.py
diff --git a/test_plans/unit_tests_cryptodev_test_plan.rst b/test_plans/unit_tests_cryptodev_test_plan.rst
new file mode 100644
index 0000000..565def1
--- /dev/null
+++ b/test_plans/unit_tests_cryptodev_test_plan.rst
@@ -0,0 +1,85 @@
+.. Copyright (c) 2010,2011 Intel Corporation
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in
+ the documentation and/or other materials provided with the
+ distribution.
+
+ - Neither the name of Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived
+ from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ OF THE POSSIBILITY OF SUCH DAMAGE.
+
+==============================================
+Testing of Cryptodev Unit tests
+==============================================
+
+
+Description
+===========
+
+This document provides the plan for testing Cryptodev API via Cryptodev unit tests.
+Unit tests include supported Hardware and Software PMD(polling mode device) and supported algorithms.
+Cryptodev API provides ability to do encryption/decryption by integrating QAT(Intel� QuickAssist
+Technology) into DPDK. The QAT provides poll mode crypto driver support for
+Intel� QuickAssist Adapter 8950 hardware accelerator.
+
+The testing of Crytpodev API should be tested under either Intel QuickAssist Technology DH895xxC hardware
+accelerator or AES-NI library.
+
+This test suite will run all cryptodev related unit test cases. Alternatively, you could execute
+the unit tests manually by app/test DPDK application.
+
+Unit Test List
+==============
+
+- cryptodev_qat_autotest
+- cryptodev_qat_perftest
+- cryptodev_aesni_mb_perftest
+- cryptodev_sw_snow3g_perftest
+- cryptodev_qat_snow3g_perftest
+- cryptodev_aesni_gcm_perftest
+- cryptodev_openssl_perftest
+- cryptodev_qat_continual_perftest
+- cryptodev_aesni_mb_autotest
+- cryptodev_openssl_autotest
+- cryptodev_aesni_gcm_autotest
+- cryptodev_null_autotest
+- cryptodev_sw_snow3g_autotest
+- cryptodev_sw_kasumi_autotest
+- cryptodev_sw_zuc_autotest
+
+
+Test Case Setup
+===============
+
+1. Build DPDK and app/test app
+2. Bind cryptodev devices to igb_uio driver
+3. Manually verify the app/test by this command, as example, in your build folder
+* ./app/test -c 1 -n 1
+* RTE>> cryptodev_qat_autotest
+
+All Unit Test Cases are listed above.
+
+Expected all tests could pass in testing.
+
diff --git a/tests/TestSuite_unit_tests_cryptodev.py b/tests/TestSuite_unit_tests_cryptodev.py
new file mode 100644
index 0000000..356c22c
--- /dev/null
+++ b/tests/TestSuite_unit_tests_cryptodev.py
@@ -0,0 +1,174 @@
+# BSD LICENSE
+#
+# Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+import utils
+from test_case import TestCase
+
+
+class UnitTestsCryptodev(TestCase):
+
+ def set_up_all(self):
+
+ self.core_config = "1S/2C/1T"
+ self.number_of_ports = 1
+ self.dut_ports = self.dut.get_ports(self.nic)
+ self.verify(len(self.dut_ports) >= self.number_of_ports,
+ "Not enough ports for " + self.nic)
+ self.ports_socket = self.dut.get_numa_id(self.dut_ports[0])
+
+ self.logger.info("core config = " + self.core_config)
+ self.logger.info("number of ports = " + str(self.number_of_ports))
+ self.logger.info("dut ports = " + str(self.dut_ports))
+ self.logger.info("ports_socket = " + str(self.ports_socket))
+
+ self.core_mask = utils.create_mask(self.dut.get_core_list(
+ self.core_config,
+ socket=self.ports_socket))
+ self.port_mask = utils.create_mask([self.dut_ports[0]])
+
+ self.tx_port = self.tester.get_local_port(self.dut_ports[0])
+ self.rx_port = self.tester.get_local_port(self.dut_ports[0])
+
+ self.tx_interface = self.tester.get_interface(self.tx_port)
+ self.rx_interface = self.tester.get_interface(self.rx_port)
+
+ self.logger.info("core mask = " + self.core_mask)
+ self.logger.info("port mask = " + self.port_mask)
+ self.logger.info("tx interface = " + self.tx_interface)
+ self.logger.info("rx interface = " + self.rx_interface)
+
+ # Rebuild the dpdk with cryptodev pmds CONFIG_RTE_LIBRTE_PMD_ZUC=n
+ self.dut.send_expect("export AESNI_MULTI_BUFFER_LIB_PATH=/root/ipsec_043/code/", "#")
+ self.dut.send_expect("export LIBSSO_SNOW3G_PATH=/root/libsso_snow3g/snow3g/", "#")
+ self.dut.send_expect("export LIBSSO_ZUC_PATH=/root/libsso_zuc.1.0.1.1-8/zuc", "#")
+ self.dut.send_expect("export LIBSSO_KASUMI_PATH=/root/LibSSO_0_3_1/isg_cid-wireless_libs/ciphers/kasumi/", "#")
+ self.dut.send_expect("sed -i 's/CONFIG_RTE_LIBRTE_PMD_QAT=n$/CONFIG_RTE_LIBRTE_PMD_QAT=y/' config/common_base", "# ")
+ self.dut.send_expect("sed -i 's/CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=n$/CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=y/' config/common_base", "# ")
+ self.dut.send_expect("sed -i 's/CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO=n$/CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO=y/' config/common_base", "# ")
+ self.dut.send_expect("sed -i 's/CONFIG_RTE_LIBRTE_PMD_SNOW3G=n$/CONFIG_RTE_LIBRTE_PMD_SNOW3G=y/' config/common_base", "# ")
+ self.dut.send_expect("sed -i 's/CONFIG_RTE_LIBRTE_PMD_KASUMI=n$/CONFIG_RTE_LIBRTE_PMD_KASUMI=y/' config/common_base", "# ")
+ self.dut.send_expect("sed -i 's/CONFIG_RTE_LIBRTE_PMD_OPENSSL=n$/CONFIG_RTE_LIBRTE_PMD_OPENSSL=y/' config/common_base", "# ")
+ self.dut.send_expect("sed -i 's/CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n$/CONFIG_RTE_LIBRTE_PMD_AESNI_MB=y/' config/common_base", "# ")
+ self.dut.send_expect("sed -i 's/CONFIG_RTE_LIBRTE_PMD_ZUC=n$/CONFIG_RTE_LIBRTE_PMD_ZUC=y/' config/common_base", "# ")
+ self.dut.skip_setup = False
+ self.dut.build_install_dpdk(self.dut.target)
+
+ #out = self.dut.build_dpdk_apps("./app/test/")
+ #self.verify('make: Leaving directory' in out, "Compilation failed")
+
+
+ # Bind QAT VF devices
+ out = self.dut.send_expect("lspci -d:443|awk '{print $1}'", "# ", 10)
+ self.dut.send_expect('echo "8086 0443" > /sys/bus/pci/drivers/igb_uio/new_id', "# ", 10)
+ for line in out.replace("\r", "\n").replace("\n\n", "\n").split("\n"):
+ cmd = "echo 0000:{} > /sys/bus/pci/devices/0000\:{}/driver/unbind".format(line, line.replace(":", "\:"))
+ self.dut.send_expect(cmd, "# ", 10)
+ cmd = "echo 0000:{} > /sys/bus/pci/drivers/igb_uio/bind".format(line)
+ self.dut.send_expect(cmd, "# ", 10)
+
+ def set_up(self):
+ pass
+
+ def tear_down(self):
+ pass
+
+ def tear_down_all(self):
+ self.dut.send_expect("sed -i 's/CONFIG_RTE_LIBRTE_PMD_QAT=y$/CONFIG_RTE_LIBRTE_PMD_QAT=n/' config/common_base", "# ")
+ self.dut.send_expect("sed -i 's/CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=y$/CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=n/' config/common_base", "# ")
+ self.dut.send_expect("sed -i 's/CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO=y$/CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO=n/' config/common_base", "# ")
+ self.dut.send_expect("sed -i 's/CONFIG_RTE_LIBRTE_PMD_SNOW3G=y$/CONFIG_RTE_LIBRTE_PMD_SNOW3G=n/' config/common_base", "# ")
+ self.dut.send_expect("sed -i 's/CONFIG_RTE_LIBRTE_PMD_KASUMI=y$/CONFIG_RTE_LIBRTE_PMD_KASUMI=n/' config/common_base", "# ")
+ self.dut.send_expect("sed -i 's/CONFIG_RTE_LIBRTE_PMD_OPENSSL=y$/CONFIG_RTE_LIBRTE_PMD_OPENSSL=n/' config/common_base", "# ")
+ self.dut.send_expect("sed -i 's/CONFIG_RTE_LIBRTE_PMD_AESNI_MB=y$/CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n/' config/common_base", "# ")
+ self.dut.send_expect("sed -i 's/CONFIG_RTE_LIBRTE_PMD_ZUC=y$/CONFIG_RTE_LIBRTE_PMD_ZUC=n/' config/common_base", "# ")
+
+ def test_cryptodev_qat_autotest(self):
+ self.__run_unit_test("cryptodev_qat_autotest")
+
+ def test_cryptodev_qat_perftest(self):
+ self.__run_unit_test("cryptodev_qat_perftest")
+
+ def test_cryptodev_aesni_mb_perftest(self):
+ self.__run_unit_test("cryptodev_aesni_mb_perftest")
+
+ def test_cryptodev_sw_snow3g_perftest(self):
+ self.__run_unit_test("cryptodev_sw_snow3g_perftest")
+
+ def test_cryptodev_qat_snow3g_perftest(self):
+ self.__run_unit_test("cryptodev_qat_snow3g_perftest")
+
+ def test_cryptodev_aesni_gcm_perftest(self):
+ self.__run_unit_test("cryptodev_aesni_gcm_perftest")
+
+ def test_cryptodev_openssl_perftest(self):
+ self.__run_unit_test("cryptodev_openssl_perftest")
+
+ def test_cryptodev_qat_continual_perftest(self):
+ self.__run_unit_test("cryptodev_qat_continual_perftest")
+
+ def test_cryptodev_aesni_mb_autotest(self):
+ self.__run_unit_test("cryptodev_aesni_mb_autotest")
+
+ def test_cryptodev_openssl_autotest(self):
+ self.__run_unit_test("cryptodev_openssl_autotest")
+
+ def test_cryptodev_aesni_gcm_autotest(self):
+ self.__run_unit_test("cryptodev_aesni_gcm_autotest")
+
+ def test_cryptodev_null_autotest(self):
+ self.__run_unit_test("cryptodev_null_autotest")
+
+ def test_cryptodev_sw_snow3g_autotest(self):
+ self.__run_unit_test("cryptodev_sw_snow3g_autotest")
+
+ def test_cryptodev_sw_kasumi_autotest(self):
+ self.__run_unit_test("cryptodev_sw_kasumi_autotest")
+
+ def test_cryptodev_sw_zuc_autotest(self):
+ self.__run_unit_test("cryptodev_sw_zuc_autotest")
+
+ def __run_unit_test(self, testsuite, timeout=600):
+ print "STEP_TEST: " + testsuite
+ self.dut.send_expect("dmesg -C", "# ", 30)
+ self.dut.send_expect("./{target}/app/test -n 1 -c 0xf".format(target=self.dut.target), "RTE>>", 30)
+ out = ""
+ try:
+ out = self.dut.send_expect(testsuite, "RTE>>", timeout)
+ self.dut.send_expect("quit", "# ", 30)
+ except Exception, ex:
+ print ex
+ print "run cryptodev_unit_tests process coredump"
+ self.dut.alt_session.send_expect("killall test", "# ", 30)
+ dmesg = self.dut.alt_session.send_expect("dmesg", "# ", 30)
+ print dmesg
+ print out
+ self.verify("Test OK" in out, "Test Failed")
+
--
1.9.3
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2017-03-08 1:59 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-03-08 0:40 [dts] [PATCH] Add Cryptodev Unit Test Cases Chen, Zhaoyan
-- strict thread matches above, loose matches on Subject: below --
2017-03-08 0:22 Chen, Zhaoyan
2017-03-08 1:54 ` Liu, Yong
2017-03-08 1:59 ` Chen, Zhaoyan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).