test suite reviews and discussions
 help / color / mirror / Atom feed
From: Xueqin Lin <xueqin.lin@intel.com>
To: dts@dpdk.org
Cc: Xueqin Lin <xueqin.lin@intel.com>
Subject: [dts] [PATCH] add DDP and MPLS test plan
Date: Mon, 10 Apr 2017 21:05:44 -0400	[thread overview]
Message-ID: <1491872744-5565-1-git-send-email-xueqin.lin@intel.com> (raw)

---
 test_plans/ddp_mpls_test_plan.rst | 195 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 195 insertions(+)
 create mode 100644 test_plans/ddp_mpls_test_plan.rst

diff --git a/test_plans/ddp_mpls_test_plan.rst b/test_plans/ddp_mpls_test_plan.rst
new file mode 100644
index 0000000..d2f1cab
--- /dev/null
+++ b/test_plans/ddp_mpls_test_plan.rst
@@ -0,0 +1,195 @@
+   Copyright (c) <2017>, Intel Corporation
+   All rights reserved.
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+
+   - Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+
+   - Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in
+     the documentation and/or other materials provided with the
+     distribution.
+
+   - Neither the name of Intel Corporation nor the names of its
+     contributors may be used to endorse or promote products derived
+     from this software without specific prior written permission.
+
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+   FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+   COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+   INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+   SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+   STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+   OF THE POSSIBILITY OF SUCH DAMAGE.
+
+============================
+Introduction
+============================
+FVL6 supports DDP(Dynamic Device Personalization) to program analyzer/parser 
+via AdminQ. Profile can be used to update FVL configuration tables via MMIO 
+configuration space, not microcode or firmware itself. For microcode/FW 
+changes new HW/FW/NVM image must be uploaded to the NIC. Profiles will be 
+stored in binary files and need to be passed to AQ to program FVL during 
+initialization stage. 
+
+With DDP, MPLS(Multi-protocal Label Switching) can be supported by NVM with 
+profile updated. 
+Below HW features have be enabled for MPLS:
+  - MPLS packet type recognition
+  - Cloud filter for MPLS with MPLS label 
+Only 25G NIC supports DDP and MPLS so far.
+
+Prerequisites
+=============
+1. Host PF in DPDK driver. Create 1 VF from 1 PF with DPDK driver::
+   ./tools/dpdk-devbind.py -b igb_uio 81:00.0
+   echo 1 >/sys/bus/pci/devices/0000:81:00.0/max_vfs
+
+2. Detach VF from the host::
+   rmmod i40evf
+
+3. Pass through VF 81:10.0 to vm0, start vm0.
+
+4. Login vm0, then bind VF0 device to igb_uio driver.
+
+5. Start testpmd on host and vm0 in chained port topology, add txq/rxq to 
+   enable multi-queues. In general, PF's max queue is 64, VF's max queue 
+   is 4:: 
+   ./testpmd -c f -n 4 -- -i --port-topology=chained --txqflags=0 
+   --txq=4 --rxq=4 
+
+
+Test Case 1: Load dynamic device personalization
+==================================================
+1. Stop testpmd port before loading profile::
+   testpmd > stop port all
+
+2. Load profile mplsogre-l2.pkgo which is a binary file:: 
+   testpmd > ddp add (port_id) (profile_path
+
+3. Check profile info successfully::
+   testpmd > ddp get list (port_id)
+
+4. Start testpmd port::
+   testpmd > start port all
+        
+Note:: 
+Loading ddp is the prerequisite for below MPLS relatived cases, operate global 
+reset or lanconf tool to recover original setting. Global Reset Trigger reg is 
+0xb8190, first cmd is core reset, second cmd is global reset::
+   testpmd > write reg 0 0xb8190 1
+   testpmd > write reg 0 0xb8190 2
+
+
+Test Case 2: MPLS udp packet for PF
+==================================================
+1. Add udp flow rule for PF, set label as random 20 bits, queue should be among 
+   configured queue number::
+   testpmd > flow create 0 ingress pattern eth / ipv4 / udp / mpls label 
+   is 0x12345 / end actions pf / queue index <id> / end
+        
+2. Set fwd rxonly, enable output and start PF and VF testpmd
+
+3. Send udp MPLS packet with good checksum, udp dport is 6635, label is same 
+   as configured rule::
+   sendp([Ether()/IP()/UDP(dport=6635)/MPLS(label=0x12345)/Ether()/IP()
+   /TCP()], iface=txItf)
+
+4. Check PF could receive configured label udp packet, checksum is good, 
+   queue is configured queue
+
+5. Send udp MPLS packet with bad checksum, udp dport is 6635, label is same 
+   as configured rule::
+   sendp([Ether()/IP()/UDP(chksum=0x1234,dport=6635)/MPLS(label=0x12345)/Ether()
+   /IP()/TCP()], iface=txItf)
+
+6. Check PF could receive configured label udp packet, checksum is good, queue is 
+   configured queue
+
+
+Test Case 3: MPLS gre packet for PF
+==================================================
+1. Add gre flow rule for PF, set label as random 20 bits, queue should be among 
+   configured queue number::
+   testpmd > flow create 0 ingress pattern eth / ipv4 / gre / mpls label is 
+   0xee456 / end actions pf / queue index <id> / end
+
+2. Set fwd rxonly, enable output and start PF and VF testpmd
+
+3. Send gre MPLS packet with good checksum, gre proto is 8847, label is same 
+   as configured rule::
+   sendp([Ether()/IP(proto=47)/GRE(proto=0x8847)/MPLS(label=0xee456)/Ether()
+   /IP()/UDP()], iface=txItf)
+
+4. Check VF could receive configured label gre packet, checksum is good, queue 
+   is configured queue
+
+5. Send gre MPLS packet with bad checksum, gre proto is 8847, label is same as 
+   configured rule::
+   sendp([Ether()/IP(proto=47)/GRE(chksum=0x1234,proto=0x8847)/MPLS(label=0xee456)
+   /Ether()/IP()/UDP()], iface=txItf)
+
+6. Check VF could receive configured label gre packet, checksum is good, queue is 
+   configured queue
+
+
+Test Case 4: MPLS udp packet for VF
+==================================================
+1. Add udp flow rule for VF, set label as random 20 bits, queue should be among 
+   configured queue number::
+   testpmd > flow create 0 ingress pattern eth / ipv4 / udp / mpls label is 0x234 
+   / end actions vf id 0 / queue index <id> / end
+
+2. Set fwd rxonly, enable output and start PF and VF testpmd
+
+3. Send udp MPLS packet with good checksum, udp dport is 6635, label is same as 
+   configured rule::
+   sendp([Ether()/IP()/UDP(dport=6635)/MPLS(label=0x234)/Ether()/IP()/TCP()], 
+   iface=txItf)
+
+4. Check VF could receive configured label udp packet, checksum is good, queue is 
+   configured queue
+
+5. Send udp MPLS packet with bad checksum, udp dport is 6635, label is same as 
+   configured rule::
+   sendp([Ether()/IP()/UDP(chksum=0x1234,dport=6635)/MPLS(label=0x234)/Ether()
+   /IP()/TCP()], iface=txItf)
+
+6. Check VF could receive configured label udp packet, checksum is good, queue is 
+   configured queue
+
+
+Test Case 5: MPLS gre packet for VF
+==================================================
+1. Add gre flow rule for VF, set label as random 20 bit, queue should be among 
+   configured queue number::
+   testpmd > flow create 0 ingress pattern eth / ipv4 / gre / mpls label is 
+   0xffff / end actions vf id 0 / queue index <id> / end
+
+2. Set fwd rxonly, enable output and start PF and VF testpmd
+
+3. Send gre MPLS packet with good checksum, gre proto is 8847, label is same as 
+   configured rule::
+   sendp([Ether()/IP(proto=47)/GRE(proto=0x8847)/MPLS(label=0xffff)/Ether()
+   /IP()/UDP()], iface=txItf)
+
+4. Check VF could receive configured label gre packet, checksum is good, queue is 
+   configured queue
+
+5. Send gre MPLS packet with bad checksum, gre proto is 8847, label is same as 
+   configured rule::
+   sendp([Ether()/IP(proto=47)/GRE(chksum=0x1234,proto=0x8847)/MPLS(label=0xffff)
+   /Ether()/IP()/UDP()], iface=txItf)
+
+6. Check VF could receive configured label gre packet, checksum is good, queue is 
+   configured queue
+
+
-- 
2.5.5

             reply	other threads:[~2017-04-11  7:09 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-04-11  1:05 Xueqin Lin [this message]
2017-04-20  6:21 ` Liu, Yong

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1491872744-5565-1-git-send-email-xueqin.lin@intel.com \
    --to=xueqin.lin@intel.com \
    --cc=dts@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).