From: "xu,gang" <gangx.xu@intel.com>
To: dts@dpdk.org
Cc: "xu,gang" <gangx.xu@intel.com>
Subject: [dts] [PATCH V1] add test suite vf interrupt_pmd
Date: Sat, 27 May 2017 10:18:18 +0800 [thread overview]
Message-ID: <1495851498-62609-3-git-send-email-gangx.xu@intel.com> (raw)
In-Reply-To: <1495851498-62609-1-git-send-email-gangx.xu@intel.com>
Signed-off-by: xu,gang <gangx.xu@intel.com>
---
tests/TestSuite_vf_interrupt_pmd.py | 289 ++++++++++++++++++++++++++++++++++++
1 file changed, 289 insertions(+)
create mode 100644 tests/TestSuite_vf_interrupt_pmd.py
diff --git a/tests/TestSuite_vf_interrupt_pmd.py b/tests/TestSuite_vf_interrupt_pmd.py
new file mode 100644
index 0000000..613f05e
--- /dev/null
+++ b/tests/TestSuite_vf_interrupt_pmd.py
@@ -0,0 +1,289 @@
+# BSD LICENSE
+#
+# Copyright(c) 2010-2016 Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+"""
+DPDK Test suite.
+Test vf_interrupt_pmd.
+"""
+
+import utils
+import string
+import time
+import re
+from pmd_output import PmdOutput
+from qemu_kvm import QEMUKvm
+from test_case import TestCase
+
+
+class TestVfInterruptPmd(TestCase):
+
+ def set_up_all(self):
+ """
+ Run at the start of each test suite.
+ """
+ self.dut_ports = self.dut.get_ports(self.nic)
+ self.verify(len(self.dut_ports) >= 2, "Insufficient ports")
+ cores = self.dut.get_core_list("1S/4C/1T")
+ self.coremask = utils.create_mask(cores)
+ self.portmask = utils.create_mask(self.dut_ports)
+
+ self.path = "./examples/l3fwd-power/build/l3fwd-power"
+
+ testport_0 = self.tester.get_local_port(self.dut_ports[0])
+ self.rx_intf_0 = self.tester.get_interface(testport_0)
+ testport_1 = self.tester.get_local_port(self.dut_ports[1])
+ self.rx_intf_1 = self.tester.get_interface(testport_1)
+
+ self.mac_port_0 = self.dut.get_mac_address(self.dut_ports[0])
+ self.mac_port_1 = self.dut.get_mac_address(self.dut_ports[1])
+
+ self.dut.virt_exit()
+
+ def build_app(self, use_dut):
+ # build sample app
+ out = use_dut.build_dpdk_apps("./examples/l3fwd-power")
+ self.verify("Error" not in out, "compilation error 1")
+ self.verify("No such file" not in out, "compilation error 2")
+
+ def set_up(self):
+ """
+ Run before each test case.
+ """
+ pass
+
+ def generate_sriov_vfport(self, use_driver):
+ """
+ generate sriov vfs by port
+ """
+ self.dut.generate_sriov_vfs_by_port(
+ self.dut_ports[0], 1, driver=use_driver)
+ self.sriov_vfs_port_0 = self.dut.ports_info[
+ self.dut_ports[0]]['vfs_port']
+ self.dut.generate_sriov_vfs_by_port(
+ self.dut_ports[1], 1, driver=use_driver)
+ self.sriov_vfs_port_1 = self.dut.ports_info[
+ self.dut_ports[1]]['vfs_port']
+
+ def bind_vfs(self, driver):
+ """
+ bind vfs to driver
+ """
+ for port in self.sriov_vfs_port_0:
+ port.bind_driver(driver)
+ time.sleep(1)
+ for port in self.sriov_vfs_port_1:
+ port.bind_driver(driver)
+ time.sleep(1)
+
+ def setup_vm_env(self):
+ """
+ Start One VM with one virtio device
+ """
+ self.dut_testpmd = PmdOutput(self.dut)
+ self.dut_testpmd.start_testpmd(
+ "Default", "--rxq=4 --txq=4 --port-topology=chained")
+ self.dut_testpmd.execute_cmd("start")
+
+ vf0_prop_1 = {'opt_host': self.sriov_vfs_port_0[0].pci}
+ vf0_prop_2 = {'opt_host': self.sriov_vfs_port_1[0].pci}
+ self.vm0 = QEMUKvm(self.dut, 'vm0', 'vf_interrupt_pmd')
+ self.vm0.set_vm_device(driver='pci-assign', **vf0_prop_1)
+ self.vm0.set_vm_device(driver='pci-assign', **vf0_prop_2)
+ try:
+ self.vm0_dut = self.vm0.start()
+ if self.vm0_dut is None:
+ raise Exception("Set up VM ENV failed")
+ else:
+ self.verify(self.vm0_dut.ports_info[
+ 0]['intf'] != 'N/A', "Not interface")
+ except Exception as e:
+ self.destroy_vm_env()
+ self.logger.error("Failure for %s" % str(e))
+
+ self.vm0_vf0_mac = self.vm0_dut.get_mac_address(0)
+ self.vm0_vf1_mac = self.vm0_dut.get_mac_address(1)
+ self.vm0_dut.send_expect("systemctl stop NetworkManager", "# ", 60)
+
+ def destroy_vm_env(self):
+ """
+ destroy vm environment
+ """
+ if getattr(self, 'vm0', None):
+ self.vm0_dut.kill_all()
+ self.vm0_dut_ports = None
+ # destroy vm0
+ self.vm0.stop()
+ self.vm0 = None
+ if getattr(self, 'used_dut_port', None):
+ self.dut.destroy_sriov_vfs_by_port(self.used_dut_port)
+ port = self.dut.ports_info[self.used_dut_port]['port']
+ self.used_dut_port = None
+
+ self.env_done = False
+
+ def change_port_conf(self, use_dut, lsc_enable=True, rxq_enable=True):
+ """
+ change interrupt enable
+ """
+ sed_cmd_fmt = "/intr_conf.*=.*{/,/\}\,$/c\ .intr_conf = {\\n\\t\\t.lsc = %d,\\n\\t\\t.rxq = %d,\\n\\t},"
+ lsc = 1
+ rxq = 1
+ if lsc_enable:
+ lsc = 0
+ if rxq_enable:
+ rxq = 1
+ sed_cmd_str = sed_cmd_fmt % (lsc, rxq)
+ out = use_dut.send_expect(
+ "sed -i '%s' examples/l3fwd-power/main.c" % sed_cmd_str, "# ", 60)
+
+ def scapy_send_packet(self, mac, testinterface, queuenum=1):
+ """
+ Send a packet to port
+ """
+ if queuenum == 1:
+ self.tester.scapy_append(
+ 'sendp([Ether(dst="%s")/IP()/UDP()/Raw(\'X\'*18)], iface="%s")' % (mac, testinterface))
+ elif queuenum == 2:
+ for dst in range(16):
+ self.tester.scapy_append(
+ 'sendp([Ether(dst="%s")/IP(dst="127.0.0.%d")/UDP()/Raw(\'X\'*18)], iface="%s")' % (mac, dst, testinterface))
+ else:
+ for dst in range(256):
+ self.tester.scapy_append(
+ 'sendp([Ether(dst="%s")/IP(dst="127.0.0.%d")/UDP()/Raw(\'X\'*18)], iface="%s")' % (mac, dst, testinterface))
+ self.tester.scapy_execute()
+
+ def test_vf_VM_uio(self):
+ """
+ verify VF interrupt pmd in VM with uio
+ """
+ self.verify(self.drivername in ['igb_uio'], "NOT Support")
+ self.generate_sriov_vfport('igb_uio')
+ self.bind_vfs('pci-stub')
+ self.setup_vm_env()
+ self.change_port_conf(self.vm0_dut, lsc_enable=True, rxq_enable=False)
+ self.build_app(self.vm0_dut)
+
+ cmd = self.path + \
+ " -c f -n %d -- -p 0x3 -P --config='(0,0,1),(1,0,2)'" % (
+ self.vm0_dut.get_memory_channels())
+ self.vm0_dut.send_expect(cmd, "L3FWD_POWER", 60)
+ self.scapy_send_packet(self.vm0_vf0_mac, self.rx_intf_0)
+ self.scapy_send_packet(self.vm0_vf1_mac, self.rx_intf_1)
+ out = self.vm0_dut.get_session_output(timeout=30)
+ self.destroy_vm_env()
+ self.dut.send_expect("quit", "# ", 60)
+ self.verify(
+ "lcore 1 is waked up from rx interrupt on port 0" in out, "lcore 1 not waked up")
+ self.verify(
+ "lcore 1 sleeps until interrupt triggers" in out, "lcore 1 not sleeps")
+ self.verify(
+ "lcore 2 is waked up from rx interrupt on port 1" in out, "lcore 2 not waked up")
+ self.verify(
+ "lcore 2 sleeps until interrupt triggers" in out, "lcore 2 not sleeps")
+
+ def test_vf_host_uio(self):
+ """
+ verify VF interrupt pmd in Host with uio
+ """
+ self.verify(self.drivername in ['igb_uio'], "NOT Support")
+ self.dut.restore_interfaces()
+ self.generate_sriov_vfport('ixgbe')
+ self.bind_vfs('igb_uio')
+ self.change_port_conf(self.dut, lsc_enable=True, rxq_enable=False)
+ self.build_app(self.dut)
+
+ cmd = self.path + " -c %s -n %d -- -p %s -P --config='(0,0,1),(1,0,2)'" % (
+ self.coremask, self.dut.get_memory_channels(), self.portmask)
+ self.dut.send_expect(cmd, "L3FWD_POWER", 60)
+ self.scapy_send_packet(self.mac_port_0, self.rx_intf_0)
+ self.scapy_send_packet(self.mac_port_1, self.rx_intf_1)
+ out = self.dut.get_session_output(timeout=60)
+ self.dut.send_expect("^C", "# ", 60)
+ self.verify(
+ "lcore 1 is waked up from rx interrupt on port 0" in out, "lcore 1 not waked up")
+ self.verify(
+ "lcore 1 sleeps until interrupt triggers" in out, "lcore 1 not sleeps")
+ self.verify(
+ "lcore 2 is waked up from rx interrupt on port 1" in out, "lcore 2 not waked up")
+ self.verify(
+ "lcore 2 sleeps until interrupt triggers" in out, "lcore 2 not sleeps")
+
+ def test_vf_host_vfio(self):
+ """
+ verify VF interrupt pmd in Host with vfio
+ """
+ self.verify(self.drivername in ['vfio-pci'], "NOT Support")
+ self.dut.restore_interfaces()
+ self.generate_sriov_vfport('ixgbe')
+ self.bind_vfs('vfio-pci')
+ self.change_port_conf(self.dut, lsc_enable=True, rxq_enable=False)
+ self.build_app(self.dut)
+
+ cmd = self.path + " -c %s -n %d -- -p %s -P --config='(0,0,1),(0,1,2)(1,0,3),(1,1,4)'" % (
+ self.coremask, self.dut.get_memory_channels(), self.portmask)
+ self.dut.send_expect(cmd, "L3FWD_POWER", 60)
+ self.scapy_send_packet(self.mac_port_0, self.rx_intf_0, 2)
+ self.scapy_send_packet(self.mac_port_1, self.rx_intf_1, 2)
+ out = self.dut.get_session_output(timeout=60)
+ self.dut.send_expect("^C", "# ", 60)
+ print out
+ self.verify(
+ "lcore 1 is waked up from rx interrupt on port 0" in out, "lcore 1 not waked up")
+ self.verify(
+ "lcore 1 sleeps until interrupt triggers" in out, "lcore 1 not sleeps")
+ self.verify(
+ "lcore 2 is waked up from rx interrupt on port 0" in out, "lcore 2 not waked up")
+ self.verify(
+ "lcore 2 sleeps until interrupt triggers" in out, "lcore 2 not sleeps")
+ self.verify(
+ "lcore 3 is waked up from rx interrupt on port 1" in out, "lcore 2 not waked up")
+ self.verify(
+ "lcore 3 sleeps until interrupt triggers" in out, "lcore 2 not sleeps")
+ self.verify(
+ "lcore 4 is waked up from rx interrupt on port 1" in out, "lcore 2 not waked up")
+ self.verify(
+ "lcore 4 sleeps until interrupt triggers" in out, "lcore 2 not sleeps")
+
+ def tear_down(self):
+ """
+ Run after each test case.
+ """
+ self.dut.virt_exit()
+ self.dut.kill_all()
+ time.sleep(2)
+
+ def tear_down_all(self):
+ """
+ Run after each test suite.
+ """
+ pass
--
1.9.3
next prev parent reply other threads:[~2017-05-27 2:16 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-27 2:18 [dts] [PATCH V1] modify the interrupt pmd test plan xu,gang
2017-05-27 2:18 ` [dts] [PATCH V1] add vf " xu,gang
2017-06-09 12:48 ` Liu, Yong
2017-05-27 2:18 ` xu,gang [this message]
2017-06-09 12:53 ` [dts] [PATCH V1] add test suite vf interrupt_pmd Liu, Yong
2017-06-09 12:45 ` [dts] [PATCH V1] modify the interrupt pmd test plan Liu, Yong
2017-09-08 2:30 [dts] [PATCH V2] add test suite for vf interruot_pmd xu,gang
2017-09-08 2:30 ` [dts] [PATCH V1] add test suite vf interrupt_pmd xu,gang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1495851498-62609-3-git-send-email-gangx.xu@intel.com \
--to=gangx.xu@intel.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).