From: Lijuan Tu <lijuanx.a.tu@intel.com>
To: dts@dpdk.org
Cc: Lijuan Tu <lijuanx.a.tu@intel.com>
Subject: [dts] [PATCH]tests: stop port when configure tx_vlan
Date: Sun, 21 Jan 2018 04:00:32 +0800 [thread overview]
Message-ID: <1516478432-140299-1-git-send-email-lijuanx.a.tu@intel.com> (raw)
dpdk commit 597f9fafe13b ("app/testpmd: convert to new Tx offloads API").
This patch requires us to stop port when configure the TX offloads.
Signed-off-by: Lijuan Tu <lijuanx.a.tu@intel.com>
---
tests/TestSuite_dual_vlan.py | 17 +++++++++++++++++
tests/TestSuite_vf_vlan.py | 3 +++
tests/TestSuite_vlan.py | 3 +++
3 files changed, 23 insertions(+)
diff --git a/tests/TestSuite_dual_vlan.py b/tests/TestSuite_dual_vlan.py
index d2eb79b..d0d7856 100644
--- a/tests/TestSuite_dual_vlan.py
+++ b/tests/TestSuite_dual_vlan.py
@@ -195,7 +195,11 @@ class TestDualVlan(TestCase):
self.mode_config(strip=temp[0], filter=temp[1], qinq=temp[2])
if (caseDef & txCase) != 0:
+ self.dut.send_expect('stop', "testpmd> ")
+ self.dut.send_expect('port stop all', "testpmd> ")
self.dut.send_expect('tx_vlan set %s %s' % (dutTxPortId, txvlan), "testpmd> ")
+ self.dut.send_expect('port start all', "testpmd> ")
+ self.dut.send_expect('start', "testpmd> ")
configMode = "Strip %s, filter %s 0x1, extend %s, insert %s" % (temp[0], temp[1], temp[2], "on" if (caseDef & txCase) != 0 else "off")
@@ -209,14 +213,23 @@ class TestDualVlan(TestCase):
self.check_result(vlanCase[caseIndex][1], configMode + " result Error")
self.dut.send_expect('rx_vlan rm %s %s' % (invlan, dutRxPortId), "testpmd> ")
if (caseDef & txCase) != 0:
+ self.dut.send_expect('stop', "testpmd> ")
+ self.dut.send_expect('port stop all', "testpmd> ")
self.dut.send_expect('tx_vlan reset %s' % dutTxPortId, "testpmd> ")
+ self.dut.send_expect('port start all', "testpmd> ")
+ self.dut.send_expect('start', "testpmd> ")
+
else:
self.dut.send_expect('rx_vlan add %s %s' % (invlan, dutRxPortId), "testpmd> ")
self.dut.send_expect('rx_vlan add %s %s' % (outvlan, dutRxPortId), "testpmd> ")
self.vlan_send_packet(outvlan, invlan)
self.check_result(vlanCase[caseIndex], configMode + " result Error")
if (caseDef & txCase) != 0:
+ self.dut.send_expect('stop', "testpmd> ")
+ self.dut.send_expect('port stop all', "testpmd> ")
self.dut.send_expect('tx_vlan reset %s' % dutTxPortId, "testpmd> ")
+ self.dut.send_expect('port start all', "testpmd> ")
+ self.dut.send_expect('start', "testpmd> ")
self.dut.send_expect('rx_vlan rm %s %s' % (invlan, dutRxPortId), "testpmd> ")
self.dut.send_expect('rx_vlan rm %s %s' % (outvlan, dutRxPortId), "testpmd> ")
@@ -346,7 +359,11 @@ class TestDualVlan(TestCase):
if(self.nic == "hartwell"):
self.dut.send_expect("vlan set strip on %s" % dutTxPortId, "testpmd> ")
+ self.dut.send_expect("stop", "testpmd> ")
+ self.dut.send_expect("port stop all", "testpmd> ")
self.dut.send_expect("tx_vlan set %s %s" % (dutTxPortId, txvlan), "testpmd> ")
+ self.dut.send_expect("port start all", "testpmd> ")
+ self.dut.send_expect("start", "testpmd> ")
self.vlan_send_packet()
out = self.get_tcpdump_package()
diff --git a/tests/TestSuite_vf_vlan.py b/tests/TestSuite_vf_vlan.py
index be5512b..c0b26a3 100644
--- a/tests/TestSuite_vf_vlan.py
+++ b/tests/TestSuite_vf_vlan.py
@@ -290,7 +290,10 @@ class TestVfVlan(TestCase):
# please enable rx_vlan at the same time
if self.kdriver == "i40e":
self.vm0_testpmd.execute_cmd('rx_vlan add %d 0' % tx_vlan)
+ self.vm0_testpmd.execute_cmd('stop')
+ self.vm0_testpmd.execute_cmd('port stop all')
self.vm0_testpmd.execute_cmd('tx_vlan set 0 %d' % tx_vlan)
+ self.vm0_testpmd.execute_cmd('port start all')
self.tx_and_check(tx_vlan=tx_vlan)
self.vm0_testpmd.quit()
diff --git a/tests/TestSuite_vlan.py b/tests/TestSuite_vlan.py
index dc68a6e..dad5f7b 100644
--- a/tests/TestSuite_vlan.py
+++ b/tests/TestSuite_vlan.py
@@ -205,7 +205,10 @@ class TestVlan(TestCase):
intf = self.tester.get_interface(port)
self.dut.send_expect("set nbport 2", "testpmd> ")
+ self.dut.send_expect("stop", "testpmd> ")
+ self.dut.send_expect("port stop all", "testpmd> ")
self.dut.send_expect("tx_vlan set %s %d" % (dutTxPortId, self.vlan), "testpmd> ")
+ self.dut.send_expect("port start all", "testpmd> ")
self.dut.send_expect("start", "testpmd> ")
self.vlan_send_packet(-1)
--
1.8.3.1
reply other threads:[~2018-01-20 11:25 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1516478432-140299-1-git-send-email-lijuanx.a.tu@intel.com \
--to=lijuanx.a.tu@intel.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).