* [dts] [PATCH V1 1/2] add tests/metering_and_policing script @ 2019-02-21 7:16 Wenjie Li 2019-02-21 7:16 ` [dts] [PATCH V1 2/2] add meter_and_policy config files Wenjie Li 2019-02-21 9:54 ` [dts] [PATCH V1 1/2] add tests/metering_and_policing script Peng, Yuan 0 siblings, 2 replies; 3+ messages in thread From: Wenjie Li @ 2019-02-21 7:16 UTC (permalink / raw) To: dts; +Cc: Wenjie Li Signed-off-by: Wenjie Li <wenjiex.a.li@intel.com> --- tests/TestSuite_metering_and_policing.py | 514 +++++++++++++++++++++++ 1 file changed, 514 insertions(+) create mode 100644 tests/TestSuite_metering_and_policing.py diff --git a/tests/TestSuite_metering_and_policing.py b/tests/TestSuite_metering_and_policing.py new file mode 100644 index 0000000..488e23f --- /dev/null +++ b/tests/TestSuite_metering_and_policing.py @@ -0,0 +1,514 @@ +#BSD LICENSE +# +# Copyright(c) 2010-2016 Intel Corporation. All rights reserved. +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# * Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# * Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# * Neither the name of Intel Corporation nor the names of its +# contributors may be used to endorse or promote products derived +# from this software without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + + +""" +DPDK Test suite. +Test metering_and_policing. +""" +import utils +import string +import time +import re +from test_case import TestCase +from plotting import Plotting +from settings import HEADER_SIZE +from dut import Dut + + +class TestMeteringAndPolicing(TestCase): + + def copy_config_files_to_dut(self): + """ + Copy firmware.cli, dscp_*.sh from tester to DUT. + """ + file = 'meter_and_policy_config.tar.gz' + src_file = r'./dep/%s' % file + dst1 = '/tmp' + dst2 = '/root/dpdk/drivers/net/softnic' + self.dut.session.copy_file_to(src_file, dst1) + self.dut.send_expect("tar xf %s/%s -C %s" % (dst1, file, dst2), "#", 30) + + def update_firmware_cli(self, caseID): + """ + Update firmware.cli. + """ + self.ori_firmware_cli = "/root/dpdk/drivers/net/softnic/meter_and_policing_firmware.cli" + if len(self.dut_ports) == 4: + self.ori_firmware_cli = "/root/dpdk/drivers/net/softnic/meter_and_policing_firmware_4ports.cli" + self.new_firmware_cli = "%s-%s" % (self.ori_firmware_cli, caseID) + self.dut.send_expect("rm -f %s" % self.new_firmware_cli, "#") + self.dut.send_expect("cp %s %s" % (self.ori_firmware_cli, self.new_firmware_cli), "#") + + # link dev + self.dut.send_expect("sed -i -e 's/^.*link LINK0 dev.*$/link LINK0 dev %s/g' %s" + % (self.dut_p0_pci, self.new_firmware_cli), "#") + self.dut.send_expect("sed -i -e 's/^.*link LINK1 dev.*$/link LINK1 dev %s/g' %s" + % (self.dut_p1_pci, self.new_firmware_cli), "#") + if len(self.dut_ports) == 4: + self.dut.send_expect("sed -i -e 's/^.*link LINK2 dev.*$/link LINK2 dev %s/g' %s" + % (self.dut_p2_pci, self.new_firmware_cli), "#") + self.dut.send_expect("sed -i -e 's/^.*link LINK3 dev.*$/link LINK3 dev %s/g' %s" + % (self.dut_p3_pci, self.new_firmware_cli), "#") + + # table action + temp = "table action profile AP0" + if caseID == 8: + self.dut.send_expect("sed -i -e 's/^.*%s.*$/%s ipv6 offset 270 fwd meter trtcm tc 1 stats pkts/g' %s" + % (temp, temp, self.new_firmware_cli), "#") + else: + self.dut.send_expect("sed -i -e 's/^.*%s.*$/%s ipv4 offset 270 fwd meter trtcm tc 1 stats pkts/g' %s" + % (temp, temp, self.new_firmware_cli), "#") + + # pipeline RX table + temp = "pipeline RX table match" + if caseID == 7: + target = "hash ext key 16 mask 00FF0000FFFFFFFFFFFFFFFFFFFFFFFF offset 278 buckets 16K size 65K action AP0" + self.dut.send_expect("sed -i -e 's/^.*%s.*$/%s %s/g' %s" + % (temp, temp, target, self.new_firmware_cli), "#") + elif caseID == 8: + self.dut.send_expect("sed -i -e 's/^.*%s.*$/%s acl ipv6 offset 270 size 4K action AP0/g' %s" + % (temp, temp, self.new_firmware_cli), "#") + else: + self.dut.send_expect("sed -i -e 's/^.*%s.*$/%s acl ipv4 offset 270 size 4K action AP0/g' %s" + % (temp, temp, self.new_firmware_cli), "#") + + # use .sh file as RX table + temp = "pipeline RX table 0 dscp" + if caseID == 10: + self.dut.send_expect("sed -i -e 's/^.*%s.*$/%s \/root\/dpdk\/drivers\/net\/softnic\/dscp_red.sh/g' %s" + % (temp, temp, self.new_firmware_cli), "#") + elif caseID == 11: + self.dut.send_expect("sed -i -e 's/^.*%s.*$/%s \/root\/dpdk\/drivers\/net\/softnic\/dscp_yellow.sh/g' %s" + % (temp, temp, self.new_firmware_cli), "#") + elif caseID == 12: + self.dut.send_expect("sed -i -e 's/^.*%s.*$/%s \/root\/dpdk\/drivers\/net\/softnic\/dscp_green.sh/g' %s" + % (temp, temp, self.new_firmware_cli), "#") + elif caseID == 13: + self.dut.send_expect("sed -i -e 's/^.*%s.*$/%s \/root\/dpdk\/drivers\/net\/softnic\/dscp_default.sh/g' %s" + % (temp, temp, self.new_firmware_cli), "#") + + # thread * pipeline RX/TX enable + self.dut.send_expect("sed -i -e 's/thread 5 pipeline RX enable/thread %d pipeline RX enable/g' %s" + % (len(self.dut_ports), self.new_firmware_cli), "#") + self.dut.send_expect("sed -i -e 's/thread 5 pipeline TX enable/thread %d pipeline TX enable/g' %s" + % (len(self.dut_ports), self.new_firmware_cli), "#") + + def start_testpmd(self, filename): + """ + Start testpmd. + """ + if len(self.dut_ports) == 2: + portmask = "0x4" + Corelist = "0x7" + Servicecorelist = "0x4" + if len(self.dut_ports) == 4: + portmask = "0x10" + Corelist = "0x1f" + Servicecorelist = "0x10" + self.path = "./%s/app/testpmd" % self.target + cmd = self.path + " -c %s -s %s -n %d --vdev 'net_softnic0,firmware=%s,cpu_id=0,conn_port=8086' \ + -- -i --rxq=%d --txq=%d --portmask=%s" \ + % (Corelist, Servicecorelist, self.dut.get_memory_channels(), filename, self.port_id, self.port_id, portmask) + self.dut.send_expect(cmd, "testpmd>", 60) + + def add_port_meter_profile(self, profile_id, cbs=400, pbs=500): + """ + Add port meter profile (trTCM rfc2968). + """ + cir = 3125000000 + pir = 3125000000 + self.dut.send_expect("add port meter profile trtcm_rfc2698 %d %d %d %d %d %d" + % (self.port_id, profile_id, cir, pir, cbs, pbs), "testpmd>") + + def create_port_meter(self, mtr_id, profile_id, gyrd_action): + """ + Create new meter object for the ethernet device. + """ + self.dut.send_expect("create port meter %d %d %d yes %s" + % (self.port_id, mtr_id, profile_id, gyrd_action), "testpmd>") + + def create_flow_rule(self, ret_id, ip_ver, protocol, spec_id, mtr_id, queue_index_id): + """ + Create flow rule based on port meter. + """ + if ip_ver == "ipv4": + src_mask = "255.255.255.255" + dst_mask = "255.255.255.255" + src_ip = "1.10.11.12" + dst_ip = "2.20.21.22" + if ip_ver == "ipv6": + src_mask = "ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff" + dst_mask = "0:0:0:0:0:0:0:0" + src_ip = "ABCD:EF01:2345:6789:ABCD:EF01:2345:5789" + dst_ip = "0:0:0:0:0:0:0:0" + protocol = protocol.lower() + if protocol == "tcp": + proto_id = 6 + if protocol == "udp": + proto_id = 17 + if protocol == "sctp": + proto_id = 132 + + out = self.dut.send_expect("flow create %d group 0 ingress pattern eth / %s proto mask 255 src mask %s dst mask" + " %s src spec %s dst spec %s proto spec %d / %s src mask 65535 dst mask 65535 src " + "spec %d dst spec %d / end actions meter mtr_id %d / queue index %d / end" + % (self.port_id, ip_ver, src_mask, dst_mask, src_ip, dst_ip, proto_id, protocol, + spec_id, spec_id, mtr_id, queue_index_id), "testpmd>") + if ret_id == 1: + self.verify("Flow rule #" in out, "flow create fail") + else: + self.verify("METER: Meter already attached to a flow: Invalid argument" in out, + "flow create should fail, but NOT failed") + + def scapy_send_packet(self, ip_ver, protocol, fwd_port, pktsize): + """ + Send a packet to port + """ + source_port = self.tester.get_interface(self.tester.get_local_port(self.dut_ports[0])) + protocol = protocol.upper() + if ip_ver == "ipv4": + src_ip = "1.10.11.12" + dst_ip = "2.20.21.22" + tag = "IP" + if protocol == "TCP": + proto_str = "proto=6" + if protocol == "UDP": + proto_str = "proto=17" + if protocol == "SCTP": + proto_str = "proto=132" + + if ip_ver == "ipv6": + src_ip = "ABCD:EF01:2345:6789:ABCD:EF01:2345:5789" + dst_ip = "2001::1" + tag = "IPv6" + if protocol == "TCP": + proto_str = "nh=6" + if protocol == "UDP": + proto_str = "nh=17" + + self.tester.scapy_append( + 'sendp([Ether(dst="%s")/%s(src="%s",dst="%s",%s)/%s(sport=%d,dport=%d)/Raw(load="P"*%d)], iface="%s")' + % (self.dut_p0_mac, tag, src_ip, dst_ip, proto_str, protocol, fwd_port, fwd_port, pktsize, source_port)) + self.tester.scapy_execute() + + def send_packet_and_check(self, ip_ver, protocol, fwd_port, pktsize, expect_port): + """ + Send packet and check the stats + """ + time.sleep(3) + rx_before = [] + tx_before = [] + for i in range(0, len(self.dut_ports)): + output = self.dut.send_expect("show port stats %d" %(i),"testpmd>") + rx_before.append(re.compile('RX-packets:\s+(.*?)\s+?').findall(output, re.S)) + tx_before.append(re.compile('TX-packets:\s+(.*?)\s+?').findall(output, re.S)) + + self.scapy_send_packet(ip_ver, protocol, fwd_port, pktsize) + + rx_after = [] + tx_after = [] + for i in range(0, len(self.dut_ports)): + output = self.dut.send_expect("show port stats %d" %(i),"testpmd>") + rx_after.append(re.compile('RX-packets:\s+(.*?)\s+?').findall(output, re.S)) + tx_after.append(re.compile('TX-packets:\s+(.*?)\s+?').findall(output, re.S)) + + rx_packets_port = [] + tx_packets_port = [] + for i in range(0, len(self.dut_ports)): + temp1 = int(rx_after[i][0]) - int(rx_before[i][0]) + temp2 = int(tx_after[i][0]) - int(tx_before[i][0]) + rx_packets_port.append(temp1) + tx_packets_port.append(temp2) + print("-"*80) + if expect_port == -1: + print("expect: Dropped") + else: + print("expect: port %d" % expect_port) + print rx_packets_port + print tx_packets_port + print("-"*80) + + if expect_port == -1: + for i in range(0, len(self.dut_ports)): + self.verify(int(rx_packets_port[0]) == 1 and int(tx_packets_port[i]) == 0, + "Wrong: the packet is not dropped") + else: + self.verify(int(rx_packets_port[0]) == int(tx_packets_port[expect_port]) == 1, + "Wrong: can't forward package to port %d " % expect_port) + + def set_up_all(self): + """ + Run at the start of each test suite. + """ + self.dut_ports = self.dut.get_ports() + self.port_nums = 2 + self.verify(len(self.dut_ports) >= self.port_nums, + "Insufficient ports for speed testing") + + self.dut_p0_pci = self.dut.get_port_pci(self.dut_ports[0]) + self.dut_p1_pci = self.dut.get_port_pci(self.dut_ports[1]) + + self.dut_p0_mac = self.dut.get_mac_address(self.dut_ports[0]) + self.dut_p1_mac = self.dut.get_mac_address(self.dut_ports[1]) + + self.pf0_interface = self.dut.ports_info[self.dut_ports[0]]['intf'] + self.pf1_interface = self.dut.ports_info[self.dut_ports[1]]['intf'] + + if len(self.dut_ports) == 4: + self.dut_p2_pci = self.dut.get_port_pci(self.dut_ports[2]) + self.dut_p3_pci = self.dut.get_port_pci(self.dut_ports[3]) + + self.dut_p2_mac = self.dut.get_mac_address(self.dut_ports[2]) + self.dut_p3_mac = self.dut.get_mac_address(self.dut_ports[3]) + + self.pf2_interface = self.dut.ports_info[self.dut_ports[2]]['intf'] + self.pf3_interface = self.dut.ports_info[self.dut_ports[3]]['intf'] + + self.port_id = len(self.dut_ports) + self.copy_config_files_to_dut() + + def set_up(self): + """ + Run before each test case. + """ + pass + + def run_param(self, cbs, pbs, protocol, head): + """ + Set cbs, pbs and protocol; return the packet size + """ + pkt1 = pbs - head + 1 + pkt2 = pbs - head + pkt3 = cbs - head + 1 + pkt4 = cbs - head + pkt_list = [pkt1,pkt2,pkt3,pkt4] + return pkt_list,cbs,pbs + + def run_port_list(self,ip_ver,protocol,fwd_port,pkt_list,port_list): + flags = 0 + for port in port_list: + self.send_packet_and_check(ip_ver=ip_ver, protocol=protocol, fwd_port=fwd_port, pktsize=pkt_list[port_list.index(port,flags)], expect_port=port) + flags = flags + 1 + + def run_testpmd(self,pkt_list,cbs,pbs,gyrd_action,ip_ver,protocol,queue_id,port_list): + self.start_testpmd(self.new_firmware_cli) + self.add_port_meter_profile(profile_id=0, cbs=cbs, pbs=pbs) + self.create_port_meter(mtr_id=0, profile_id=0, gyrd_action=gyrd_action) + self.create_flow_rule(ret_id=1, ip_ver=ip_ver, protocol=protocol, spec_id=2, mtr_id=0, queue_index_id=queue_id) + self.dut.send_expect("start", "testpmd>") + self.run_port_list(ip_ver,protocol,2,pkt_list,port_list) + + def test_ipv4_ACL_table_RFC2698_GYR(self): + """ + Test Case 1: ipv4 ACL table RFC2698 GYR + """ + self.update_firmware_cli(1) + pkt_list,cbs,pbs = self.run_param(400,500,'TCP',40) + self.run_testpmd(pkt_list, cbs, pbs, "g y r 0 0 0", "ipv4", "tcp", 0, [0,0,0,0]) + + def test_ipv4_ACL_table_RFC2698_GYD(self): + """ + Test Case 2: ipv4 ACL table RFC2698 GYD + """ + self.update_firmware_cli(2) + pkt_list, cbs, pbs = self.run_param(400, 500, 'TCP', 40) + self.run_testpmd(pkt_list, cbs, pbs, "g y d 0 0 0", "ipv4", "tcp", 0,[-1, 0, 0, 0]) + + def test_ipv4_ACL_table_RFC2698_GDR(self): + """ + Test Case 3: ipv4 ACL table RFC2698 GDR + """ + self.update_firmware_cli(3) + pkt_list, cbs, pbs = self.run_param(400, 500, 'SCTP', 32) + self.run_testpmd(pkt_list, cbs, pbs, "g d r 0 0 0", "ipv4", "sctp", 1,[1, -1, -1, 1]) + + def test_ipv4_ACL_table_RFC2698_DYR(self): + """ + Test Case 4: ipv4 ACL table RFC2698 DYR + """ + self.update_firmware_cli(4) + pkt_list, cbs, pbs = self.run_param(400, 500, 'UDP', 28) + self.run_testpmd(pkt_list, cbs, pbs, "d y r 0 0 0", "ipv4", "udp", 0, [0, 0, 0, -1]) + + def test_ipv4_ACL_table_RFC2698_DDD(self): + """ + Test Case 5: ipv4 ACL table RFC2698 DDD + """ + self.update_firmware_cli(5) + pkt_list, cbs, pbs = self.run_param(400, 500, 'TCP', 40) + self.run_testpmd(pkt_list, cbs, pbs, "d d d 0 0 0", "ipv4", "tcp", 0, [-1, -1, -1, -1]) + + def test_ipv4_with_same_cbs_and_pbs_GDR(self): + """ + Test Case 6: ipv4 with same cbs and pbs GDR + """ + self.update_firmware_cli(6) + pkt_list, cbs, pbs = self.run_param(500, 500, 'SCTP', 32) + self.run_testpmd(pkt_list, cbs, pbs, "g d r 0 0 0", "ipv4", "sctp", 0, [0,0]) + + def test_ipv4_HASH_table_RFC2698(self): + """ + Test Case 7: ipv4 HASH table RFC2698 + """ + self.update_firmware_cli(7) + pkt_list, cbs, pbs = self.run_param(400, 500, 'TCP', 40) + self.run_testpmd(pkt_list, cbs, pbs, "g y r 0 0 0", "ipv4", "tcp", 0, [0, 0, 0, 0]) + self.dut.send_expect("quit", "#", 30) + self.run_testpmd(pkt_list, cbs, pbs, "g y d 0 0 0", "ipv4", "tcp", 0, [-1,0,0,0]) + self.dut.send_expect("quit", "#", 30) + self.run_testpmd(pkt_list, cbs, pbs, "d d d 0 0 0", "ipv4", "tcp", 0, [-1,-1,-1,-1]) + self.dut.send_expect("quit", "#", 30) + + pkt_list, cbs, pbs = self.run_param(400, 500, 'SCTP', 32) + self.run_testpmd(pkt_list, cbs, pbs, "g d r 0 0 0", "ipv4", "sctp", 1, [1,-1,-1,1]) + self.dut.send_expect("quit", "#", 30) + + pkt_list, cbs, pbs = self.run_param(400, 500, 'UDP', 28) + self.run_testpmd(pkt_list, cbs, pbs, "d y r 0 0 0", "ipv4", "udp", 0, [0,0,0,-1]) + self.dut.send_expect("quit", "#", 30) + + + def test_ipv6_ACL_table_RFC2698(self): + """ + Test Case 8: ipv6 ACL table RFC2698 + """ + self.update_firmware_cli(8) + pkt_list, cbs, pbs = self.run_param(400, 500, 'TCP', 60) + + self.start_testpmd(self.new_firmware_cli) + self.add_port_meter_profile(profile_id=0, cbs=cbs, pbs=pbs) + self.create_port_meter(mtr_id=0, profile_id=0, gyrd_action="g y d 0 0 0") + self.create_port_meter(mtr_id=1, profile_id=0, gyrd_action="d y r 0 0 0") + self.create_flow_rule(ret_id=1, ip_ver="ipv6", protocol="tcp", spec_id=2, mtr_id=0, queue_index_id=0) + self.create_flow_rule(ret_id=1, ip_ver="ipv6", protocol="udp", spec_id=2, mtr_id=1, queue_index_id=1) + self.dut.send_expect("start","testpmd>") + + self.run_port_list("ipv6","tcp",2,pkt_list,[-1,0,0,0]) + pkt_list, cbs, pbs = self.run_param(400, 500, 'UDP', 48) + self.run_port_list("ipv6", "udp",2, pkt_list, [1,1,1,-1]) + + def test_ipv4_multiple_meter_and_profile(self): + """ + Test Case 9: multiple meter and profile + """ + self.update_firmware_cli(9) + + self.start_testpmd(self.new_firmware_cli) + self.add_port_meter_profile(profile_id=0, cbs=400, pbs=500) + self.add_port_meter_profile(profile_id=1, cbs=300, pbs=400) + gyrd_list = ["g y r 0 0 0", "g y d 0 0 0", "g d r 0 0 0", "d y r 0 0 0", "g y d 0 0 0", "g d r 0 0 0", "d y r 0 0 0", "d d d 0 0 0"] + for i in range(len(gyrd_list)): + self.create_port_meter(mtr_id=i, profile_id=i * 2 / len(gyrd_list), gyrd_action=gyrd_list[i]) + for i in range(len(gyrd_list)): + self.create_flow_rule(ret_id=1, ip_ver="ipv4", protocol="tcp", spec_id=i, mtr_id=i, queue_index_id=i % len(self.dut_ports)) + self.create_flow_rule(ret_id=0, ip_ver="ipv4", protocol="tcp", spec_id=len(gyrd_list), mtr_id=len(gyrd_list) - 1, queue_index_id=0) + + self.dut.send_expect("start", "testpmd>") + output = self.dut.send_expect("flow list %d" % (self.port_id), "testpmd>") + print(output) + + pkt_list, cbs, pbs = self.run_param(400, 500, 'TCP', 40) + ports_list = [[0,0,0,0], [-1,1,1,1], [0,-1,-1,0], [1,1,1,-1]] + if len(self.dut_ports) == 4: + ports_list = [[0,0,0,0], [-1,1,1,1], [2,-1,-1,2], [3,3,3,-1]] + for ports in ports_list: + self.run_port_list("ipv4", "tcp", ports_list.index(ports), pkt_list, ports) + + pkt_list, cbs, pbs = self.run_param(300, 400, 'TCP', 40) + ports_list = [[-1,0,0,0], [1,-1,-1,1], [0,0,0,-1], [-1,-1,-1,-1]] + if len(self.dut_ports) == 4: + ports_list = [[-1,0,0,0], [1,-1,-1,1], [2,2,2,-1], [-1,-1,-1,-1]] + for ports in ports_list: + self.run_port_list("ipv4", "tcp", ports_list.index(ports) + 4, pkt_list, ports) + + self.dut.send_expect("quit", "#") + + def run_pre_colored_by_DSCP_table(self,ports_list): + """ + ipv4 RFC2698 pre-colored by DSCP table + """ + pkt_list, cbs, pbs = self.run_param(400, 500, 'TCP', 40) + self.start_testpmd(self.new_firmware_cli) + self.add_port_meter_profile(profile_id=0, cbs=cbs, pbs=pbs) + self.dut.send_expect("start", "testpmd>") + + gyrd_list = ["g y r 0 0 0", "g y d 0 0 0", "g d r 0 0 0", "d y r 0 0 0"] + for gyrd in gyrd_list: + self.create_port_meter(mtr_id=gyrd_list.index(gyrd), profile_id=0, gyrd_action=gyrd) + self.create_flow_rule(ret_id=1, ip_ver="ipv4", protocol="tcp", spec_id=2, mtr_id=gyrd_list.index(gyrd), + queue_index_id=0) + self.run_port_list("ipv4", "tcp", 2, pkt_list, ports_list[gyrd_list.index(gyrd)]) + + def test_ipv4_RFC2698_pre_colored_red_by_DSCP_table(self): + """ + Test Case 10: ipv4 RFC2698 pre-colored red by DSCP table + """ + self.update_firmware_cli(10) + ports_list = [[0, 0, 0, 0], [-1, -1, -1, -1], [0, 0, 0, 0], [0, 0, 0, 0]] + self.run_pre_colored_by_DSCP_table(ports_list) + + def test_ipv4_RFC2698_pre_colored_yellow_by_DSCP_table(self): + """ + Test Case 11: ipv4 RFC2698 pre-colored yellow by DSCP table + """ + self.update_firmware_cli(11) + ports_list = [[0, 0, 0, 0], [-1, 0, 0, 0], [0,-1,-1, -1], [0, 0, 0, 0]] + self.run_pre_colored_by_DSCP_table(ports_list) + + def test_ipv4_RFC2698_pre_colored_green_by_DSCP_table(self): + """ + Test Case 12: ipv4 RFC2698 pre-colored green by DSCP table + """ + self.update_firmware_cli(12) + ports_list = [[0, 0, 0, 0], [-1, 0, 0, 0], [0, -1, -1, 0], [0, 0, 0, -1]] + self.run_pre_colored_by_DSCP_table(ports_list) + + def test_ipv4_RFC2698_pre_colored_default_by_DSCP_table(self): + """ + Test Case 13: ipv4 RFC2698 pre-colored by default DSCP table + """ + self.update_firmware_cli(13) + ports_list = [[0, 0, 0, 0], [-1, 0, 0, 0], [0, -1, -1, 0], [0, 0, 0, -1]] + self.run_pre_colored_by_DSCP_table(ports_list) + + def tear_down(self): + """ + Run after each test case. + """ + self.dut.kill_all() + time.sleep(2) + + def tear_down_all(self): + """ + Run after each test suite. + """ + pass -- 2.17.2 ^ permalink raw reply [flat|nested] 3+ messages in thread
* [dts] [PATCH V1 2/2] add meter_and_policy config files 2019-02-21 7:16 [dts] [PATCH V1 1/2] add tests/metering_and_policing script Wenjie Li @ 2019-02-21 7:16 ` Wenjie Li 2019-02-21 9:54 ` [dts] [PATCH V1 1/2] add tests/metering_and_policing script Peng, Yuan 1 sibling, 0 replies; 3+ messages in thread From: Wenjie Li @ 2019-02-21 7:16 UTC (permalink / raw) To: dts; +Cc: Wenjie Li Add meter_and_policy config files, include: 1. dscp_default.sh 2. dscp_green.sh 3. dscp_red.sh 4. dscp_yellow.sh 5. meter_and_policing_firmware_4ports.cli 6. meter_and_policing_firmware.cli Compress them into meter_and_policy_config.tar.gz. Signed-off-by: Wenjie Li <wenjiex.a.li@intel.com> --- dep/meter_and_policy_config.tar.gz | Bin 0 -> 1031 bytes 1 file changed, 0 insertions(+), 0 deletions(-) create mode 100644 dep/meter_and_policy_config.tar.gz diff --git a/dep/meter_and_policy_config.tar.gz b/dep/meter_and_policy_config.tar.gz new file mode 100644 index 0000000000000000000000000000000000000000..c5100d9bad7ea200cbc71161188c17a0f19a6d09 GIT binary patch literal 1031 zcmV+i1o-<OiwFRIKssCi1MON(Z{kQ0&Dp=AZgYvDKa7b6aTv{MHLKO^h{N8HV>e(0 zY)^MP!Sn04T!HZA0S5+1A{R<Ksd`=AcD>gWB9RHRVWdVuKD8|~xjBb1G~e^+ine`a zKK{<7$9+$BB=>I^7agyA1MDoj*|OZ&Km*+9G`0J1hvM(l7~sok#%qn&u76bOf2@^C z&ZYjN^e=>L^nVE}SvW>6avBAV5=TycPJT{)PJTgtL4HAgL4HYoNq$LwN&b(W|CH$S z-mYDL(!W;G`P6@m{<+`nH2S}Ul^oT?QB54x#8FKg)x=Rv`q88xP5RNKA5Hqvq#sTC z(WD<u`q88x?R@O~r$nFkcJ2C;{tGporcY-(0*-k9_oUzG{}NVmv>=Wa#L<E{S`bGI z;%GtoDM&vB>8Bw56r`Vm^iz<23erzO`YA|1h4ZoVpAvoE+qLUIQ&#C=kVL~QoyK9D zjEAFG&z=IUhF+FxYg*wnK5dNy`uA9eFZAy*jvxFP?@A^b{a?a*@M8{HoT+J?D9DY1 zNnj>mgZrtvg~5NT*!RE~JJD%Ap0pgN_cfi(kTzgbP;(XLR)L-1k1{r!MG$0J&*_;w zN}<)B-}yt|bCbZvkIKbt`5fc!I1Jl(Z7=7zQxM!09dHxyz;z!Z^$4F5Wrrpm*(46x z?UI}Qc3F>hltmBiNMlxQ+6ZhffbBiBF8O>LX8ACV`s_ALlVn)(ynn~;{7<+lxG|2S zR3kWYXKAGRi>&C@^Pl~4Yj$xhXU+oi&}Vbb90zah0sj8$pKlDxy_f9%%sQVLYq3>~ zZ^!s5CbnZ@6_eXB={PUd`GJ*EI!+_t4ARla;8QC%hj$5V6NX-h6Sz0OKnhsfGTvNG zEPn-7yaFqKhfQ<41e>Ry=>E4Bh}Qv$Iv{-3qzMQ@8>b0mIvvIM=a=sc;_T5|JaZ6T z2BW74h=5?V4QF6OJnHe7u?DgSYc`g9PC5&0IKkA@om?jVrNH~PTo#vedb{(HZrI1c z0a0xBdX)uX%Y>CtzBelNM&(O%gzE=cj5nRZ7|)XoS4DwpWeil@+8W6R^+-P0Ay`?& z!3Jl3i{Ujeq6S9pV%Au-raHUH_<dmh8nAc`SXO}7scCF}f39HV!>l0UV3&y1#aa@v zx=c$V%8Fg#8JL$EkD|o}7vGF5<yR`3@>D%3UUxFDm@Mi}78R3a-O1%CHqk1GptB)0 zm6UlZVuP31wHuYj&SD1|r9ZO9f&O3kY_0#7=;xhor}_MU5qoR>zkK`szgYDDVzdAE zj&J|pTpNFMyZu3$<kde!oYW=1yH58k9qN_3!OM1ZO<&bmV~xEx`yXswb7BA}004Uo B41E9q literal 0 HcmV?d00001 -- 2.17.2 ^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [dts] [PATCH V1 1/2] add tests/metering_and_policing script 2019-02-21 7:16 [dts] [PATCH V1 1/2] add tests/metering_and_policing script Wenjie Li 2019-02-21 7:16 ` [dts] [PATCH V1 2/2] add meter_and_policy config files Wenjie Li @ 2019-02-21 9:54 ` Peng, Yuan 1 sibling, 0 replies; 3+ messages in thread From: Peng, Yuan @ 2019-02-21 9:54 UTC (permalink / raw) To: Li, WenjieX A, dts; +Cc: Li, WenjieX A Hi wenjie, Some comments inline. Thanks. Yuan. -----Original Message----- From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of Wenjie Li Sent: Thursday, February 21, 2019 3:17 PM To: dts@dpdk.org Cc: Li, WenjieX A <wenjiex.a.li@intel.com> Subject: [dts] [PATCH V1 1/2] add tests/metering_and_policing script Signed-off-by: Wenjie Li <wenjiex.a.li@intel.com> --- tests/TestSuite_metering_and_policing.py | 514 +++++++++++++++++++++++ 1 file changed, 514 insertions(+) create mode 100644 tests/TestSuite_metering_and_policing.py diff --git a/tests/TestSuite_metering_and_policing.py b/tests/TestSuite_metering_and_policing.py new file mode 100644 index 0000000..488e23f --- /dev/null +++ b/tests/TestSuite_metering_and_policing.py @@ -0,0 +1,514 @@ +#BSD LICENSE +# +# Copyright(c) 2010-2016 Intel Corporation. All rights reserved. +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or without # +modification, are permitted provided that the following conditions # +are met: +# +# * Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# * Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# * Neither the name of Intel Corporation nor the names of its +# contributors may be used to endorse or promote products derived +# from this software without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS # +"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT # +LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR # +A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT # +OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, # +SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT # +LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, # +DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY # +THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT # +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE # +OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + + +""" +DPDK Test suite. +Test metering_and_policing. +""" +import utils +import string +import time +import re +from test_case import TestCase +from plotting import Plotting +from settings import HEADER_SIZE +from dut import Dut + + +class TestMeteringAndPolicing(TestCase): + + def copy_config_files_to_dut(self): + """ + Copy firmware.cli, dscp_*.sh from tester to DUT. + """ + file = 'meter_and_policy_config.tar.gz' + src_file = r'./dep/%s' % file + dst1 = '/tmp' + dst2 = '/root/dpdk/drivers/net/softnic' + self.dut.session.copy_file_to(src_file, dst1) + self.dut.send_expect("tar xf %s/%s -C %s" % (dst1, file, dst2), + "#", 30) + + def update_firmware_cli(self, caseID): + """ + Update firmware.cli. + """ + self.ori_firmware_cli = "/root/dpdk/drivers/net/softnic/meter_and_policing_firmware.cli" + if len(self.dut_ports) == 4: + self.ori_firmware_cli = "/root/dpdk/drivers/net/softnic/meter_and_policing_firmware_4ports.cli" + self.new_firmware_cli = "%s-%s" % (self.ori_firmware_cli, caseID) + self.dut.send_expect("rm -f %s" % self.new_firmware_cli, "#") + self.dut.send_expect("cp %s %s" % (self.ori_firmware_cli, + self.new_firmware_cli), "#") + + # link dev + self.dut.send_expect("sed -i -e 's/^.*link LINK0 dev.*$/link LINK0 dev %s/g' %s" + % (self.dut_p0_pci, self.new_firmware_cli), "#") + self.dut.send_expect("sed -i -e 's/^.*link LINK1 dev.*$/link LINK1 dev %s/g' %s" + % (self.dut_p1_pci, self.new_firmware_cli), "#") + if len(self.dut_ports) == 4: + self.dut.send_expect("sed -i -e 's/^.*link LINK2 dev.*$/link LINK2 dev %s/g' %s" + % (self.dut_p2_pci, self.new_firmware_cli), "#") + self.dut.send_expect("sed -i -e 's/^.*link LINK3 dev.*$/link LINK3 dev %s/g' %s" + % (self.dut_p3_pci, + self.new_firmware_cli), "#") + + # table action + temp = "table action profile AP0" + if caseID == 8: + self.dut.send_expect("sed -i -e 's/^.*%s.*$/%s ipv6 offset 270 fwd meter trtcm tc 1 stats pkts/g' %s" + % (temp, temp, self.new_firmware_cli), "#") + else: + self.dut.send_expect("sed -i -e 's/^.*%s.*$/%s ipv4 offset 270 fwd meter trtcm tc 1 stats pkts/g' %s" + % (temp, temp, self.new_firmware_cli), + "#") + + # pipeline RX table + temp = "pipeline RX table match" + if caseID == 7: + target = "hash ext key 16 mask 00FF0000FFFFFFFFFFFFFFFFFFFFFFFF offset 278 buckets 16K size 65K action AP0" + self.dut.send_expect("sed -i -e 's/^.*%s.*$/%s %s/g' %s" + % (temp, temp, target, self.new_firmware_cli), "#") + elif caseID == 8: + self.dut.send_expect("sed -i -e 's/^.*%s.*$/%s acl ipv6 offset 270 size 4K action AP0/g' %s" + % (temp, temp, self.new_firmware_cli), "#") + else: + self.dut.send_expect("sed -i -e 's/^.*%s.*$/%s acl ipv4 offset 270 size 4K action AP0/g' %s" + % (temp, temp, self.new_firmware_cli), + "#") + + # use .sh file as RX table + temp = "pipeline RX table 0 dscp" + if caseID == 10: + self.dut.send_expect("sed -i -e 's/^.*%s.*$/%s \/root\/dpdk\/drivers\/net\/softnic\/dscp_red.sh/g' %s" + % (temp, temp, self.new_firmware_cli), "#") + elif caseID == 11: + self.dut.send_expect("sed -i -e 's/^.*%s.*$/%s \/root\/dpdk\/drivers\/net\/softnic\/dscp_yellow.sh/g' %s" + % (temp, temp, self.new_firmware_cli), "#") + elif caseID == 12: + self.dut.send_expect("sed -i -e 's/^.*%s.*$/%s \/root\/dpdk\/drivers\/net\/softnic\/dscp_green.sh/g' %s" + % (temp, temp, self.new_firmware_cli), "#") + elif caseID == 13: + self.dut.send_expect("sed -i -e 's/^.*%s.*$/%s \/root\/dpdk\/drivers\/net\/softnic\/dscp_default.sh/g' %s" + % (temp, temp, self.new_firmware_cli), + "#") + + # thread * pipeline RX/TX enable + self.dut.send_expect("sed -i -e 's/thread 5 pipeline RX enable/thread %d pipeline RX enable/g' %s" + % (len(self.dut_ports), self.new_firmware_cli), "#") + self.dut.send_expect("sed -i -e 's/thread 5 pipeline TX enable/thread %d pipeline TX enable/g' %s" + % (len(self.dut_ports), [yuan]: If it is not the "5" in the pipeline, the command can't be executed. + self.new_firmware_cli), "#") + + def start_testpmd(self, filename): + """ + Start testpmd. + """ + if len(self.dut_ports) == 2: + portmask = "0x4" + Corelist = "0x7" + Servicecorelist = "0x4" + if len(self.dut_ports) == 4: + portmask = "0x10" + Corelist = "0x1f" + Servicecorelist = "0x10" + self.path = "./%s/app/testpmd" % self.target + cmd = self.path + " -c %s -s %s -n %d --vdev 'net_softnic0,firmware=%s,cpu_id=0,conn_port=8086' \ + -- -i --rxq=%d --txq=%d --portmask=%s" \ + % (Corelist, Servicecorelist, self.dut.get_memory_channels(), filename, self.port_id, self.port_id, portmask) + self.dut.send_expect(cmd, "testpmd>", 60) + + def add_port_meter_profile(self, profile_id, cbs=400, pbs=500): + """ + Add port meter profile (trTCM rfc2968). + """ + cir = 3125000000 + pir = 3125000000 + self.dut.send_expect("add port meter profile trtcm_rfc2698 %d %d %d %d %d %d" + % (self.port_id, profile_id, cir, pir, + cbs, pbs), "testpmd>") + + def create_port_meter(self, mtr_id, profile_id, gyrd_action): + """ + Create new meter object for the ethernet device. + """ + self.dut.send_expect("create port meter %d %d %d yes %s" + % (self.port_id, mtr_id, profile_id, + gyrd_action), "testpmd>") + + def create_flow_rule(self, ret_id, ip_ver, protocol, spec_id, mtr_id, queue_index_id): + """ + Create flow rule based on port meter. + """ + if ip_ver == "ipv4": + src_mask = "255.255.255.255" + dst_mask = "255.255.255.255" + src_ip = "1.10.11.12" + dst_ip = "2.20.21.22" + if ip_ver == "ipv6": + src_mask = "ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff" + dst_mask = "0:0:0:0:0:0:0:0" + src_ip = "ABCD:EF01:2345:6789:ABCD:EF01:2345:5789" + dst_ip = "0:0:0:0:0:0:0:0" + protocol = protocol.lower() + if protocol == "tcp": + proto_id = 6 + if protocol == "udp": + proto_id = 17 + if protocol == "sctp": + proto_id = 132 + + out = self.dut.send_expect("flow create %d group 0 ingress pattern eth / %s proto mask 255 src mask %s dst mask" + " %s src spec %s dst spec %s proto spec %d / %s src mask 65535 dst mask 65535 src " + "spec %d dst spec %d / end actions meter mtr_id %d / queue index %d / end" + % (self.port_id, ip_ver, src_mask, dst_mask, src_ip, dst_ip, proto_id, protocol, + spec_id, spec_id, mtr_id, queue_index_id), "testpmd>") + if ret_id == 1: + self.verify("Flow rule #" in out, "flow create fail") + else: + self.verify("METER: Meter already attached to a flow: Invalid argument" in out, + "flow create should fail, but NOT failed") + + def scapy_send_packet(self, ip_ver, protocol, fwd_port, pktsize): + """ + Send a packet to port + """ + source_port = self.tester.get_interface(self.tester.get_local_port(self.dut_ports[0])) + protocol = protocol.upper() + if ip_ver == "ipv4": + src_ip = "1.10.11.12" + dst_ip = "2.20.21.22" + tag = "IP" + if protocol == "TCP": + proto_str = "proto=6" + if protocol == "UDP": + proto_str = "proto=17" + if protocol == "SCTP": + proto_str = "proto=132" + + if ip_ver == "ipv6": + src_ip = "ABCD:EF01:2345:6789:ABCD:EF01:2345:5789" + dst_ip = "2001::1" + tag = "IPv6" + if protocol == "TCP": + proto_str = "nh=6" + if protocol == "UDP": + proto_str = "nh=17" + + self.tester.scapy_append( + 'sendp([Ether(dst="%s")/%s(src="%s",dst="%s",%s)/%s(sport=%d,dport=%d)/Raw(load="P"*%d)], iface="%s")' + % (self.dut_p0_mac, tag, src_ip, dst_ip, proto_str, protocol, fwd_port, fwd_port, pktsize, source_port)) + self.tester.scapy_execute() + + def send_packet_and_check(self, ip_ver, protocol, fwd_port, pktsize, expect_port): + """ + Send packet and check the stats + """ + time.sleep(3) + rx_before = [] + tx_before = [] + for i in range(0, len(self.dut_ports)): + output = self.dut.send_expect("show port stats %d" %(i),"testpmd>") + rx_before.append(re.compile('RX-packets:\s+(.*?)\s+?').findall(output, re.S)) + + tx_before.append(re.compile('TX-packets:\s+(.*?)\s+?').findall(output, + re.S)) + + self.scapy_send_packet(ip_ver, protocol, fwd_port, pktsize) + + rx_after = [] + tx_after = [] + for i in range(0, len(self.dut_ports)): + output = self.dut.send_expect("show port stats %d" %(i),"testpmd>") + rx_after.append(re.compile('RX-packets:\s+(.*?)\s+?').findall(output, re.S)) + + tx_after.append(re.compile('TX-packets:\s+(.*?)\s+?').findall(output, + re.S)) + + rx_packets_port = [] + tx_packets_port = [] + for i in range(0, len(self.dut_ports)): + temp1 = int(rx_after[i][0]) - int(rx_before[i][0]) + temp2 = int(tx_after[i][0]) - int(tx_before[i][0]) + rx_packets_port.append(temp1) + tx_packets_port.append(temp2) + print("-"*80) + if expect_port == -1: + print("expect: Dropped") + else: + print("expect: port %d" % expect_port) + print rx_packets_port + print tx_packets_port + print("-"*80) + + if expect_port == -1: + for i in range(0, len(self.dut_ports)): + self.verify(int(rx_packets_port[0]) == 1 and int(tx_packets_port[i]) == 0, + "Wrong: the packet is not dropped") + else: + self.verify(int(rx_packets_port[0]) == int(tx_packets_port[expect_port]) == 1, + "Wrong: can't forward package to port %d " % + expect_port) + + def set_up_all(self): + """ + Run at the start of each test suite. + """ + self.dut_ports = self.dut.get_ports() + self.port_nums = 2 + self.verify(len(self.dut_ports) >= self.port_nums, + "Insufficient ports for speed testing") + + self.dut_p0_pci = self.dut.get_port_pci(self.dut_ports[0]) + self.dut_p1_pci = self.dut.get_port_pci(self.dut_ports[1]) + + self.dut_p0_mac = self.dut.get_mac_address(self.dut_ports[0]) + self.dut_p1_mac = self.dut.get_mac_address(self.dut_ports[1]) + + self.pf0_interface = self.dut.ports_info[self.dut_ports[0]]['intf'] + self.pf1_interface = + self.dut.ports_info[self.dut_ports[1]]['intf'] + + if len(self.dut_ports) == 4: + self.dut_p2_pci = self.dut.get_port_pci(self.dut_ports[2]) + self.dut_p3_pci = self.dut.get_port_pci(self.dut_ports[3]) + + self.dut_p2_mac = self.dut.get_mac_address(self.dut_ports[2]) + self.dut_p3_mac = + self.dut.get_mac_address(self.dut_ports[3]) + + self.pf2_interface = self.dut.ports_info[self.dut_ports[2]]['intf'] + self.pf3_interface = + self.dut.ports_info[self.dut_ports[3]]['intf'] + + self.port_id = len(self.dut_ports) + self.copy_config_files_to_dut() + + def set_up(self): + """ + Run before each test case. + """ + pass + + def run_param(self, cbs, pbs, protocol, head): + """ + Set cbs, pbs and protocol; return the packet size + """ [yuan]: "Protocol" is not used in this function. + pkt1 = pbs - head + 1 + pkt2 = pbs - head + pkt3 = cbs - head + 1 + pkt4 = cbs - head + pkt_list = [pkt1,pkt2,pkt3,pkt4] + return pkt_list,cbs,pbs + + def run_port_list(self,ip_ver,protocol,fwd_port,pkt_list,port_list): + flags = 0 + for port in port_list: + self.send_packet_and_check(ip_ver=ip_ver, protocol=protocol, fwd_port=fwd_port, pktsize=pkt_list[port_list.index(port,flags)], expect_port=port) + flags = flags + 1 [yuan]: Sorry, I don't understand the logic pkt_list[port_list.index(port,flags)] + + def run_testpmd(self,pkt_list,cbs,pbs,gyrd_action,ip_ver,protocol,queue_id,port_list): + self.start_testpmd(self.new_firmware_cli) + self.add_port_meter_profile(profile_id=0, cbs=cbs, pbs=pbs) + self.create_port_meter(mtr_id=0, profile_id=0, gyrd_action=gyrd_action) + self.create_flow_rule(ret_id=1, ip_ver=ip_ver, protocol=protocol, spec_id=2, mtr_id=0, queue_index_id=queue_id) + self.dut.send_expect("start", "testpmd>") + self.run_port_list(ip_ver,protocol,2,pkt_list,port_list) + + def test_ipv4_ACL_table_RFC2698_GYR(self): + """ + Test Case 1: ipv4 ACL table RFC2698 GYR + """ + self.update_firmware_cli(1) + pkt_list,cbs,pbs = self.run_param(400,500,'TCP',40) [yuan]: I think you'd better define cbs and pbs instead of as a return value. + self.run_testpmd(pkt_list, cbs, pbs, "g y r 0 0 0", "ipv4", + "tcp", 0, [0,0,0,0]) + + def test_ipv4_ACL_table_RFC2698_GYD(self): + """ + Test Case 2: ipv4 ACL table RFC2698 GYD + """ + self.update_firmware_cli(2) + pkt_list, cbs, pbs = self.run_param(400, 500, 'TCP', 40) + self.run_testpmd(pkt_list, cbs, pbs, "g y d 0 0 0", "ipv4", + "tcp", 0,[-1, 0, 0, 0]) + + def test_ipv4_ACL_table_RFC2698_GDR(self): + """ + Test Case 3: ipv4 ACL table RFC2698 GDR + """ + self.update_firmware_cli(3) + pkt_list, cbs, pbs = self.run_param(400, 500, 'SCTP', 32) + self.run_testpmd(pkt_list, cbs, pbs, "g d r 0 0 0", "ipv4", + "sctp", 1,[1, -1, -1, 1]) + + def test_ipv4_ACL_table_RFC2698_DYR(self): + """ + Test Case 4: ipv4 ACL table RFC2698 DYR + """ + self.update_firmware_cli(4) + pkt_list, cbs, pbs = self.run_param(400, 500, 'UDP', 28) + self.run_testpmd(pkt_list, cbs, pbs, "d y r 0 0 0", "ipv4", + "udp", 0, [0, 0, 0, -1]) + + def test_ipv4_ACL_table_RFC2698_DDD(self): + """ + Test Case 5: ipv4 ACL table RFC2698 DDD + """ + self.update_firmware_cli(5) + pkt_list, cbs, pbs = self.run_param(400, 500, 'TCP', 40) + self.run_testpmd(pkt_list, cbs, pbs, "d d d 0 0 0", "ipv4", + "tcp", 0, [-1, -1, -1, -1]) + + def test_ipv4_with_same_cbs_and_pbs_GDR(self): + """ + Test Case 6: ipv4 with same cbs and pbs GDR + """ + self.update_firmware_cli(6) + pkt_list, cbs, pbs = self.run_param(500, 500, 'SCTP', 32) + self.run_testpmd(pkt_list, cbs, pbs, "g d r 0 0 0", "ipv4", + "sctp", 0, [0,0]) + + def test_ipv4_HASH_table_RFC2698(self): + """ + Test Case 7: ipv4 HASH table RFC2698 + """ + self.update_firmware_cli(7) + pkt_list, cbs, pbs = self.run_param(400, 500, 'TCP', 40) + self.run_testpmd(pkt_list, cbs, pbs, "g y r 0 0 0", "ipv4", "tcp", 0, [0, 0, 0, 0]) + self.dut.send_expect("quit", "#", 30) + self.run_testpmd(pkt_list, cbs, pbs, "g y d 0 0 0", "ipv4", "tcp", 0, [-1,0,0,0]) + self.dut.send_expect("quit", "#", 30) + self.run_testpmd(pkt_list, cbs, pbs, "d d d 0 0 0", "ipv4", "tcp", 0, [-1,-1,-1,-1]) + self.dut.send_expect("quit", "#", 30) + + pkt_list, cbs, pbs = self.run_param(400, 500, 'SCTP', 32) + self.run_testpmd(pkt_list, cbs, pbs, "g d r 0 0 0", "ipv4", "sctp", 1, [1,-1,-1,1]) + self.dut.send_expect("quit", "#", 30) + + pkt_list, cbs, pbs = self.run_param(400, 500, 'UDP', 28) + self.run_testpmd(pkt_list, cbs, pbs, "d y r 0 0 0", "ipv4", "udp", 0, [0,0,0,-1]) + self.dut.send_expect("quit", "#", 30) + + + def test_ipv6_ACL_table_RFC2698(self): + """ + Test Case 8: ipv6 ACL table RFC2698 + """ + self.update_firmware_cli(8) + pkt_list, cbs, pbs = self.run_param(400, 500, 'TCP', 60) + + self.start_testpmd(self.new_firmware_cli) + self.add_port_meter_profile(profile_id=0, cbs=cbs, pbs=pbs) + self.create_port_meter(mtr_id=0, profile_id=0, gyrd_action="g y d 0 0 0") + self.create_port_meter(mtr_id=1, profile_id=0, gyrd_action="d y r 0 0 0") + self.create_flow_rule(ret_id=1, ip_ver="ipv6", protocol="tcp", spec_id=2, mtr_id=0, queue_index_id=0) + self.create_flow_rule(ret_id=1, ip_ver="ipv6", protocol="udp", spec_id=2, mtr_id=1, queue_index_id=1) + self.dut.send_expect("start","testpmd>") + + self.run_port_list("ipv6","tcp",2,pkt_list,[-1,0,0,0]) + pkt_list, cbs, pbs = self.run_param(400, 500, 'UDP', 48) + self.run_port_list("ipv6", "udp",2, pkt_list, [1,1,1,-1]) + + def test_ipv4_multiple_meter_and_profile(self): + """ + Test Case 9: multiple meter and profile + """ + self.update_firmware_cli(9) + + self.start_testpmd(self.new_firmware_cli) + self.add_port_meter_profile(profile_id=0, cbs=400, pbs=500) + self.add_port_meter_profile(profile_id=1, cbs=300, pbs=400) + gyrd_list = ["g y r 0 0 0", "g y d 0 0 0", "g d r 0 0 0", "d y r 0 0 0", "g y d 0 0 0", "g d r 0 0 0", "d y r 0 0 0", "d d d 0 0 0"] + for i in range(len(gyrd_list)): + self.create_port_meter(mtr_id=i, profile_id=i * 2 / len(gyrd_list), gyrd_action=gyrd_list[i]) + for i in range(len(gyrd_list)): + self.create_flow_rule(ret_id=1, ip_ver="ipv4", protocol="tcp", spec_id=i, mtr_id=i, queue_index_id=i % len(self.dut_ports)) + self.create_flow_rule(ret_id=0, ip_ver="ipv4", protocol="tcp", + spec_id=len(gyrd_list), mtr_id=len(gyrd_list) - 1, queue_index_id=0) + + self.dut.send_expect("start", "testpmd>") + output = self.dut.send_expect("flow list %d" % (self.port_id), "testpmd>") + print(output) + + pkt_list, cbs, pbs = self.run_param(400, 500, 'TCP', 40) + ports_list = [[0,0,0,0], [-1,1,1,1], [0,-1,-1,0], [1,1,1,-1]] + if len(self.dut_ports) == 4: + ports_list = [[0,0,0,0], [-1,1,1,1], [2,-1,-1,2], [3,3,3,-1]] + for ports in ports_list: + self.run_port_list("ipv4", "tcp", ports_list.index(ports), + pkt_list, ports) + + pkt_list, cbs, pbs = self.run_param(300, 400, 'TCP', 40) + ports_list = [[-1,0,0,0], [1,-1,-1,1], [0,0,0,-1], [-1,-1,-1,-1]] + if len(self.dut_ports) == 4: + ports_list = [[-1,0,0,0], [1,-1,-1,1], [2,2,2,-1], [-1,-1,-1,-1]] + for ports in ports_list: + self.run_port_list("ipv4", "tcp", ports_list.index(ports) + + 4, pkt_list, ports) + + self.dut.send_expect("quit", "#") + + def run_pre_colored_by_DSCP_table(self,ports_list): + """ + ipv4 RFC2698 pre-colored by DSCP table + """ + pkt_list, cbs, pbs = self.run_param(400, 500, 'TCP', 40) + self.start_testpmd(self.new_firmware_cli) + self.add_port_meter_profile(profile_id=0, cbs=cbs, pbs=pbs) + self.dut.send_expect("start", "testpmd>") + + gyrd_list = ["g y r 0 0 0", "g y d 0 0 0", "g d r 0 0 0", "d y r 0 0 0"] + for gyrd in gyrd_list: + self.create_port_meter(mtr_id=gyrd_list.index(gyrd), profile_id=0, gyrd_action=gyrd) + self.create_flow_rule(ret_id=1, ip_ver="ipv4", protocol="tcp", spec_id=2, mtr_id=gyrd_list.index(gyrd), + queue_index_id=0) + self.run_port_list("ipv4", "tcp", 2, pkt_list, + ports_list[gyrd_list.index(gyrd)]) + + def test_ipv4_RFC2698_pre_colored_red_by_DSCP_table(self): + """ + Test Case 10: ipv4 RFC2698 pre-colored red by DSCP table + """ + self.update_firmware_cli(10) + ports_list = [[0, 0, 0, 0], [-1, -1, -1, -1], [0, 0, 0, 0], [0, 0, 0, 0]] + self.run_pre_colored_by_DSCP_table(ports_list) + + def test_ipv4_RFC2698_pre_colored_yellow_by_DSCP_table(self): + """ + Test Case 11: ipv4 RFC2698 pre-colored yellow by DSCP table + """ + self.update_firmware_cli(11) + ports_list = [[0, 0, 0, 0], [-1, 0, 0, 0], [0,-1,-1, -1], [0, 0, 0, 0]] + self.run_pre_colored_by_DSCP_table(ports_list) + + def test_ipv4_RFC2698_pre_colored_green_by_DSCP_table(self): + """ + Test Case 12: ipv4 RFC2698 pre-colored green by DSCP table + """ + self.update_firmware_cli(12) + ports_list = [[0, 0, 0, 0], [-1, 0, 0, 0], [0, -1, -1, 0], [0, 0, 0, -1]] + self.run_pre_colored_by_DSCP_table(ports_list) + + def test_ipv4_RFC2698_pre_colored_default_by_DSCP_table(self): + """ + Test Case 13: ipv4 RFC2698 pre-colored by default DSCP table + """ + self.update_firmware_cli(13) + ports_list = [[0, 0, 0, 0], [-1, 0, 0, 0], [0, -1, -1, 0], [0, 0, 0, -1]] + self.run_pre_colored_by_DSCP_table(ports_list) + + def tear_down(self): + """ + Run after each test case. + """ + self.dut.kill_all() + time.sleep(2) + + def tear_down_all(self): + """ + Run after each test suite. + """ + pass -- 2.17.2 ^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2019-02-21 9:54 UTC | newest] Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2019-02-21 7:16 [dts] [PATCH V1 1/2] add tests/metering_and_policing script Wenjie Li 2019-02-21 7:16 ` [dts] [PATCH V1 2/2] add meter_and_policy config files Wenjie Li 2019-02-21 9:54 ` [dts] [PATCH V1 1/2] add tests/metering_and_policing script Peng, Yuan
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).