From: Xueqin Lin <xueqin.lin@intel.com>
To: dts@dpdk.org
Cc: Xueqin Lin <xueqin.lin@intel.com>
Subject: [dts] [PATCH] tests/vf_offload: correct case description and delete un-used function
Date: Wed, 6 Mar 2019 20:53:26 -0500 [thread overview]
Message-ID: <1551923606-119633-1-git-send-email-xueqin.lin@intel.com> (raw)
Signed-off-by: Xueqin Lin <xueqin.lin@intel.com>
---
tests/TestSuite_vf_offload.py | 29 +++++++++++------------------
1 file changed, 11 insertions(+), 18 deletions(-)
diff --git a/tests/TestSuite_vf_offload.py b/tests/TestSuite_vf_offload.py
index cb4b368..a327a7e 100644
--- a/tests/TestSuite_vf_offload.py
+++ b/tests/TestSuite_vf_offload.py
@@ -27,7 +27,7 @@ class TestVfOffload(TestCase):
self.vf_driver = self.get_suite_cfg()['vf_driver']
if self.vf_driver is None:
self.vf_driver = 'pci-stub'
- self.verify(self.vf_driver in self.supported_vf_driver, "Unspported vf driver")
+ self.verify(self.vf_driver in self.supported_vf_driver, "Unsupported vf driver")
if self.vf_driver == 'pci-stub':
self.vf_assign_method = 'pci-assign'
else:
@@ -125,12 +125,6 @@ class TestVfOffload(TestCase):
dut.send_expect("csum set sctp hw %d" % port, "testpmd>")
dut.send_expect("port start all", "testpmd>")
- def checksum_enablesw(self, port, dut):
- dut.send_expect("csum set ip sw %d" % port, "testpmd>")
- dut.send_expect("csum set udp sw %d" % port, "testpmd>")
- dut.send_expect("csum set tcp sw %d" % port, "testpmd>")
- dut.send_expect("csum set sctp sw %d" % port, "testpmd>")
-
def checksum_validate(self, packets_sent, packets_expected):
"""
Validate the checksum.
@@ -202,10 +196,10 @@ class TestVfOffload(TestCase):
def test_checksum_offload_enable(self):
"""
- Enable HW Checksum offload.
- Send packet with incorrect checksum,
- can rx it and reported the checksum error,
- verify forwarded packets have correct checksum
+ Enable HW checksum offload.
+ Send packet with incorrect checksum,
+ can rx it and report the checksum error,
+ verify forwarded packets have correct checksum.
"""
self.vm0_testpmd.start_testpmd(VM_CORES_MASK, "--portmask=%s " %
(self.portMask) + "--enable-rx-cksum " + "" +
@@ -252,8 +246,7 @@ class TestVfOffload(TestCase):
def test_checksum_offload_disable(self):
"""
- disable HW checksum offload on tx port, SW Checksum check.
- SW Checksum on by default.
+ Default checksum is SW or enable SW checksum similar to HW checksum.
Send same packet with incorrect checksum and verify checksum is valid.
"""
@@ -293,7 +286,7 @@ class TestVfOffload(TestCase):
def tcpdump_start_sniffing(self, ifaces=[]):
"""
- Starts tcpdump in the background to sniff the tester interface where
+ Start tcpdump in the background to sniff the tester interface where
the packets are transmitted to and from the self.dut.
All the captured packets are going to be stored in a file for a
post-analysis.
@@ -306,7 +299,7 @@ class TestVfOffload(TestCase):
def tcpdump_stop_sniff(self):
"""
- Stops the tcpdump process running in the background.
+ Stop the tcpdump process running in the background.
"""
self.tester.send_expect('killall tcpdump', '#')
time.sleep(1)
@@ -315,7 +308,7 @@ class TestVfOffload(TestCase):
def tcpdump_command(self, command):
"""
- Sends a tcpdump related command and returns an integer from the output
+ Send a tcpdump related command and return an integer from the output.
"""
result = self.tester.send_expect(command, '#')
@@ -324,7 +317,7 @@ class TestVfOffload(TestCase):
def number_of_packets(self, iface):
"""
- By reading the file generated by tcpdump it counts how many packets were
+ By reading the file generated by tcpdump it counts how many packets are
forwarded by the sample app and received in the self.tester. The sample app
will add a known MAC address for the test to look for.
"""
@@ -335,7 +328,7 @@ class TestVfOffload(TestCase):
def test_tso(self):
"""
- TSO IPv4 TCP, IPv6 TCP, VXLan testing
+ TSO IPv4 TCP, IPv6 TCP testing
"""
tx_interface = self.tester.get_interface(self.tester.get_local_port(self.dut_ports[0]))
rx_interface = self.tester.get_interface(self.tester.get_local_port(self.dut_ports[1]))
--
2.5.5
next reply other threads:[~2019-03-07 7:53 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-07 1:53 Xueqin Lin [this message]
2019-03-14 9:16 ` Tu, Lijuan
2019-03-14 10:07 ` Lin, Xueqin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1551923606-119633-1-git-send-email-xueqin.lin@intel.com \
--to=xueqin.lin@intel.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).