From: xuyanjie <yanjie.xu@intel.com>
To: dts@dpdk.org
Cc: xuyanjie <yanjie.xu@intel.com>
Subject: [dts] [PATCH] revised checksum offload test plan
Date: Wed, 17 Apr 2019 16:38:32 -0400 [thread overview]
Message-ID: <1555533512-172370-1-git-send-email-yanjie.xu@intel.com> (raw)
Signed-off-by: xuyanjie <yanjie.xu@intel.com>
diff --git a/test_plans/checksum_offload_test_plan.rst b/test_plans/checksum_offload_test_plan.rst
index 82fd12f..5128251 100644
--- a/test_plans/checksum_offload_test_plan.rst
+++ b/test_plans/checksum_offload_test_plan.rst
@@ -56,7 +56,7 @@ On the TX side:
RX side, the L3/L4 checksum offload by hardware can be enabled with the
following command of the ``testpmd`` application::
- enable-rx-cksum
+ enable-rx-checksum
TX side, the insertion of a L3/L4 checksum by hardware can be enabled with the
following command of the ``testpmd`` application and running in a dedicated
@@ -81,7 +81,7 @@ Prerequisites
=============
If using vfio the kernel must be >= 3.6+ and VT-d must be enabled in bios.When
-using vfio, use the following commands to load the vfio driver and bind it
+using vfio, use the following commands to to load the vfio driver and bind it
to the device under test::
modprobe vfio
@@ -93,7 +93,7 @@ launch the ``testpmd`` with the following arguments::
./build/app/testpmd -cffffff -n 1 -- -i --burst=1 --txpt=32 \
--txht=8 --txwt=0 --txfreet=0 --rxfreet=64 --mbcache=250 --portmask=0x5
- enable-rx-cksum
+ enable-rx-checksum
Set the verbose level to 1 to display information for each received packet::
@@ -219,3 +219,27 @@ Configure the traffic generator to send the multiple packets with the following
combination: good/bad ip checksum + good/bad udp/tcp checksum.
Check the Rx checksum flags consistent with expected flags.
+
+
+Test Case: Validate checksum offload performance
+=================================================================
+At least 2 ports should be binded
+
+packet_sizes = [64, 128, 256, 512, 1024]
+
+Setup the ``csum`` forwarding mode::
+
+ testpmd> set fwd csum
+ Set csum packet forwarding mode
+
+Start the packet forwarding::
+
+ testpmd> start
+ csum packet forwarding - CRC stripping disabled - packets/burst=32
+ nb forwarding cores=1 - nb forwarding ports=10
+ RX queues=1 - RX desc=128 - RX free threshold=64
+ RX threshold registers: pthresh=8 hthresh=8 wthresh=4
+ TX queues=1 - TX desc=512 - TX free threshold=0
+ TX threshold registers: pthresh=32 hthresh=8 wthresh=8
+
+Configure the traffic generator ixia to send traffic and verify throughput
--
2.7.4
next reply other threads:[~2019-04-17 14:52 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-17 20:38 xuyanjie [this message]
2019-04-17 17:26 ` Rami Rosen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1555533512-172370-1-git-send-email-yanjie.xu@intel.com \
--to=yanjie.xu@intel.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).