From: lihong <lihongx.ma@intel.com>
To: dts@dpdk.org
Cc: lihong <lihongx.ma@intel.com>
Subject: [dts] [PATCH V1] rename vxlan_gpe_support_in_i40e
Date: Tue, 21 May 2019 08:58:00 +0800 [thread overview]
Message-ID: <1558400280-4375-1-git-send-email-lihongx.ma@intel.com> (raw)
Signed-off-by: lihong <lihongx.ma@intel.com>
---
test_plans/vxlan_gpe_support_in_i40e.rst | 120 ---------------------
test_plans/vxlan_gpe_support_in_i40e_test_plan.rst | 120 +++++++++++++++++++++
2 files changed, 120 insertions(+), 120 deletions(-)
delete mode 100644 test_plans/vxlan_gpe_support_in_i40e.rst
create mode 100644 test_plans/vxlan_gpe_support_in_i40e_test_plan.rst
diff --git a/test_plans/vxlan_gpe_support_in_i40e.rst b/test_plans/vxlan_gpe_support_in_i40e.rst
deleted file mode 100644
index 02be05e..0000000
--- a/test_plans/vxlan_gpe_support_in_i40e.rst
+++ /dev/null
@@ -1,120 +0,0 @@
-.. Copyright (c) <2016-2019> Intel Corporation
- All rights reserved.
-
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions
- are met:
-
- - Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
-
- - Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in
- the documentation and/or other materials provided with the
- distribution.
-
- - Neither the name of Intel Corporation nor the names of its
- contributors may be used to endorse or promote products derived
- from this software without specific prior written permission.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- OF THE POSSIBILITY OF SUCH DAMAGE.
-
-============================
-I40E VXLAN-GPE Support Tests
-============================
-
-Prerequisites
-=============
-
-1. The DUT has at least 2 DPDK supported I40E NIC ports::
-
- Tester DUT
- eth1 <---> PORT 0
- eth2 <---> PORT 1
-
-2. Support igb_uio driver::
-
- modprobe uio
- insmod ./x86_64-native-linuxapp-gcc/kmod/igb_uio.ko
- ./usertools/dpdk-devbind.py --bind=igb_uio 04:00.0 04:00.1
-
-Test Case 1: VXLAN-GPE ipv4 packet detect
-=========================================
-1. Start testpmd::
-
- # testpmd -c 0xf -n 4 -- -i
-
-2. Add VXLAN-GPE packet type support in test pmd and enable verbose log::
-
- testpmd> set fwd io
- testpmd> set verbose 1
- testpmd> port config 0 udp_tunnel_port add vxlan-gpe 4790
-
-3. Send VXLAN-GPE packets to testpmd and check received packets::
-
- scapy> pkt=Ether(dst="3C:FD:FE:A8:C8:20")/IP(src="18.0.0.1")/UDP(dport=4790,sport=43)/VXLAN(flags=12)/IP(src="10.0.0.1")
- scapy> sendp(pkt1, iface="ens802f1", count=1)
-
-4. Expected output from testpmd::
-
- src=00:00:00:00:00:00 - dst=3C:FD:FE:A8:C8:20 - type=0x0800 - length=70 - nb_segs=1 - RSS hash=0x51ed6fc5 - RSS
- queue=0x2 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN TUNNEL_GRENAT INNER_L3_IPV4_EXT_UNKNOWN
- INNER_L4_NONFRAG - sw ptype: L2_ETHER L3_IPV4 L4_UDP - l2_len=14 - l3_len=20 - l4_len=8
- - VXLAN packet: packet type =24721, Destination UDP port =4790, VNI = 0 - Receive queue=0x2
-
-Test Case 2: VXLAN-GPE tunnel remove test
-=========================================
-1. After Test Case 1, delete the VXLAN-GPE packet type::
-
- testpmd> port config 0 udp_tunnel_port rm vxlan-gpe 4790
-
-2. Send VXLAN-GPE packets to testpmd and check the received packets
-
-3. Expected result::
-
- testpmd should treat the packet as a normal UDP packet
-
-Test Case 3: Tunnel filter VXLAN-GPE support
-============================================
-1. Start testpmd with tunneling packet type to vxlan and disable receive side
- scale for hardware limitation::
-
- # testpmd -c ffff -n 4 -- -i --disable-rss --rxq=4 --txq=4 --nb-cores=8 --nb-ports=2 --tx-offloads=0x8fff
-
-2. Set rxonly packet forwarding mode and enable verbose log::
-
- testpmd> set fwd rxonly
- testpmd> set verbose 1
-
-3. Add one new Cloud filter as table listed first::
-
- testpmd> tunnel_filter add 0 11:22:33:44:55:66 00:00:20:00:00:01 192.168.2.2 1 vxlan-gpe imac-ivlan 1 3
-
-4. Then send one packet and check packet was forwarded into right queue.
-
-+------------+------------+------------+----------+----------+--------+-------+
-| Outer Mac | Inner Mac | Inner Vlan | Outer Ip | Inner Ip | Vni ID | Queue |
-+------------+------------+------------+----------+----------+--------+-------+
-| No | Yes | Yes | No | No | No | 1 |
-+------------+------------+------------+----------+----------+--------+-------+
-| No | Yes | Yes | No | No | Yes | 1 |
-+------------+------------+------------+----------+----------+--------+-------+
-| No | Yes | No | No | No | Yes | 1 |
-+------------+------------+------------+----------+----------+--------+-------+
-| No | Yes | No | No | No | No | 1 |
-+------------+------------+------------+----------+----------+--------+-------+
-| Yes | Yes | No | No | Yes | Yes | 1 |
-+------------+------------+------------+----------+----------+--------+-------+
-| No | No | No | No | Yes | No | 1 |
-+------------+------------+------------+----------+----------+--------+-------+
diff --git a/test_plans/vxlan_gpe_support_in_i40e_test_plan.rst b/test_plans/vxlan_gpe_support_in_i40e_test_plan.rst
new file mode 100644
index 0000000..905bd88
--- /dev/null
+++ b/test_plans/vxlan_gpe_support_in_i40e_test_plan.rst
@@ -0,0 +1,120 @@
+.. Copyright (c) <2019> Intel Corporation
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in
+ the documentation and/or other materials provided with the
+ distribution.
+
+ - Neither the name of Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived
+ from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ OF THE POSSIBILITY OF SUCH DAMAGE.
+
+============================
+I40E VXLAN-GPE Support Tests
+============================
+
+Prerequisites
+=============
+
+1. The DUT has at least 2 DPDK supported I40E NIC ports::
+
+ Tester DUT
+ eth1 <---> PORT 0
+ eth2 <---> PORT 1
+
+2. Support igb_uio driver::
+
+ modprobe uio
+ insmod ./x86_64-native-linuxapp-gcc/kmod/igb_uio.ko
+ ./usertools/dpdk-devbind.py --bind=igb_uio 04:00.0 04:00.1
+
+Test Case 1: VXLAN-GPE ipv4 packet detect
+=========================================
+1. Start testpmd::
+
+ # testpmd -c 0xf -n 4 -- -i
+
+2. Add VXLAN-GPE packet type support in test pmd and enable verbose log::
+
+ testpmd> set fwd io
+ testpmd> set verbose 1
+ testpmd> port config 0 udp_tunnel_port add vxlan-gpe 4790
+
+3. Send VXLAN-GPE packets to testpmd and check received packets::
+
+ scapy> pkt=Ether(dst="3C:FD:FE:A8:C8:20")/IP(src="18.0.0.1")/UDP(dport=4790,sport=43)/VXLAN(flags=12)/IP(src="10.0.0.1")
+ scapy> sendp(pkt1, iface="ens802f1", count=1)
+
+4. Expected output from testpmd::
+
+ src=00:00:00:00:00:00 - dst=3C:FD:FE:A8:C8:20 - type=0x0800 - length=70 - nb_segs=1 - RSS hash=0x51ed6fc5 - RSS
+ queue=0x2 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN TUNNEL_GRENAT INNER_L3_IPV4_EXT_UNKNOWN
+ INNER_L4_NONFRAG - sw ptype: L2_ETHER L3_IPV4 L4_UDP - l2_len=14 - l3_len=20 - l4_len=8
+ - VXLAN packet: packet type =24721, Destination UDP port =4790, VNI = 0 - Receive queue=0x2
+
+Test Case 2: VXLAN-GPE tunnel remove test
+=========================================
+1. After Test Case 1, delete the VXLAN-GPE packet type::
+
+ testpmd> port config 0 udp_tunnel_port rm vxlan-gpe 4790
+
+2. Send VXLAN-GPE packets to testpmd and check the received packets
+
+3. Expected result::
+
+ testpmd should treat the packet as a normal UDP packet
+
+Test Case 3: Tunnel filter VXLAN-GPE support
+============================================
+1. Start testpmd with tunneling packet type to vxlan and disable receive side
+ scale for hardware limitation::
+
+ # testpmd -c ffff -n 4 -- -i --disable-rss --rxq=4 --txq=4 --nb-cores=8 --nb-ports=2 --tx-offloads=0x8fff
+
+2. Set rxonly packet forwarding mode and enable verbose log::
+
+ testpmd> set fwd rxonly
+ testpmd> set verbose 1
+
+3. Add one new Cloud filter as table listed first::
+
+ testpmd> tunnel_filter add 0 11:22:33:44:55:66 00:00:20:00:00:01 192.168.2.2 1 vxlan-gpe imac-ivlan 1 3
+
+4. Then send one packet and check packet was forwarded into right queue.
+
++------------+------------+------------+----------+----------+--------+-------+
+| Outer Mac | Inner Mac | Inner Vlan | Outer Ip | Inner Ip | Vni ID | Queue |
++------------+------------+------------+----------+----------+--------+-------+
+| No | Yes | Yes | No | No | No | 1 |
++------------+------------+------------+----------+----------+--------+-------+
+| No | Yes | Yes | No | No | Yes | 1 |
++------------+------------+------------+----------+----------+--------+-------+
+| No | Yes | No | No | No | Yes | 1 |
++------------+------------+------------+----------+----------+--------+-------+
+| No | Yes | No | No | No | No | 1 |
++------------+------------+------------+----------+----------+--------+-------+
+| Yes | Yes | No | No | Yes | Yes | 1 |
++------------+------------+------------+----------+----------+--------+-------+
+| No | No | No | No | Yes | No | 1 |
++------------+------------+------------+----------+----------+--------+-------+
--
2.7.4
next reply other threads:[~2019-05-21 8:18 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-21 0:58 lihong [this message]
2019-05-29 2:13 ` Tu, Lijuan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1558400280-4375-1-git-send-email-lihongx.ma@intel.com \
--to=lihongx.ma@intel.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).