* [dts] [PATCH V1 1/2] test_plans/eventdev_pipeline_perf: fix build warnings
@ 2019-06-12 9:00 Wenjie Li
2019-06-12 9:00 ` [dts] [PATCH V1 2/2] test_plans/index: append eventdev_pipeline_perf Wenjie Li
2019-06-13 9:11 ` [dts] [PATCH V1 1/2] test_plans/eventdev_pipeline_perf: fix build warnings Tu, Lijuan
0 siblings, 2 replies; 4+ messages in thread
From: Wenjie Li @ 2019-06-12 9:00 UTC (permalink / raw)
To: dts; +Cc: Wenjie Li
fix some build warnings.
Signed-off-by: Wenjie Li <wenjiex.a.li@intel.com>
---
.../eventdev_pipeline_perf_test_plan.rst | 31 +++++++++++++------
1 file changed, 21 insertions(+), 10 deletions(-)
diff --git a/test_plans/eventdev_pipeline_perf_test_plan.rst b/test_plans/eventdev_pipeline_perf_test_plan.rst
index 619f9a3..0cd9110 100644
--- a/test_plans/eventdev_pipeline_perf_test_plan.rst
+++ b/test_plans/eventdev_pipeline_perf_test_plan.rst
@@ -31,10 +31,12 @@ echo 24 > /proc/sys/vm/nr_hugepages
Configure limits of Eventdev devices
====================================
Set all eventdev devices sso and ssow limits to zero. Then set eventdev device under tests sso and ssow limits to non-zero values as per cores/queues requriments ::
+
echo 0 > /sys/bus/pci/devices/eventdev_device_bus_id/limits/sso
echo 0 > /sys/bus/pci/devices/eventdev_device_bus_id/limits/ssow
Example ::
+
echo 0 > /sys/bus/pci/devices/eventdev_device_bus_id/limits/tim
echo 1 > /sys/bus/pci/devices/eventdev_device_bus_id/limits/npa
echo 16 > /sys/bus/pci/devices/eventdev_device_bus_id/limits/sso
@@ -51,7 +53,8 @@ Description: Execute performance test with Atomic_atq type of stage in multi-flo
# ./build/dpdk-eventdev_pipeline -c 0xe00000 -w eventdev_device_bus_id -w device_bus_id -- -w 0xc00000 -n=0 --dump
- Parameters:
+ Parameters::
+
-c, COREMASK : Hexadecimal bitmask of cores to run on
-w, --pci-whitelist : Add a PCI device in white list.
Only use the specified PCI devices. The argument format
@@ -74,7 +77,8 @@ Description: Execute performance test with Parallel_atq type of stage in multi-f
# ./build/dpdk-eventdev_pipeline -c 0xe00000 -w eventdev_device_bus_id -w device_bus_id -- -w 0xc00000 -n=0 -p --dump
- Parameters:
+ Parameters::
+
-c, COREMASK : Hexadecimal bitmask of cores to run on
-w, --pci-whitelist : Add a PCI device in white list.
Only use the specified PCI devices. The argument format
@@ -98,7 +102,8 @@ Description: Execute performance test with Ordered_atq type of stage in multi-fl
# ./build/dpdk-eventdev_pipeline -c 0xe00000 -w eventdev_device_bus_id -w device_bus_id -- -w 0xc00000 -n=0 -o --dump
- Parameters:
+ Parameters::
+
-c, COREMASK : Hexadecimal bitmask of cores to run on
-w, --pci-whitelist : Add a PCI device in white list.
Only use the specified PCI devices. The argument format
@@ -122,7 +127,8 @@ Description: Execute performance test with Atomic_atq type of stage in multi-flo
# ./build/dpdk-eventdev_pipeline -c 0xe00000 -w eventdev_device_bus_id -w device0_bus_id -w device1_bus_id -- -w 0xc00000 -n=0 --dump
- Parameters:
+ Parameters::
+
-c, COREMASK : Hexadecimal bitmask of cores to run on
-w, --pci-whitelist : Add a PCI device in white list.
Only use the specified PCI devices. The argument format
@@ -145,7 +151,8 @@ Description: Execute performance test with Parallel_atq type of stage in multi-f
# ./build/dpdk-eventdev_pipeline -c 0xe00000 -w eventdev_device_bus_id -w device0_bus_id -w device1_bus_id -- -w 0xc00000 -n=0 -p --dump
- Parameters:
+ Parameters::
+
-c, COREMASK : Hexadecimal bitmask of cores to run on
-w, --pci-whitelist : Add a PCI device in white list.
Only use the specified PCI devices. The argument format
@@ -169,7 +176,8 @@ Description: Execute performance test with Ordered_atq type of stage in multi-fl
# ./build/dpdk-eventdev_pipeline -c 0xe00000 -w eventdev_device_bus_id -w device0_bus_id -w device1_bus_id -- -w 0xc00000 -n=0 -o --dump
- Parameters:
+ Parameters::
+
-c, COREMASK : Hexadecimal bitmask of cores to run on
-w, --pci-whitelist : Add a PCI device in white list.
Only use the specified PCI devices. The argument format
@@ -193,7 +201,8 @@ Description: Execute performance test with Atomic_atq type of stage in multi-flo
# ./build/dpdk-eventdev_pipeline -c 0xe00000 -w eventdev_device_bus_id -w device0_bus_id -w device1_bus_id -w device2_bus_id -w device3_bus_id -- -w 0xc00000 -n=0 --dump
- Parameters:
+ Parameters::
+
-c, COREMASK : Hexadecimal bitmask of cores to run on
-w, --pci-whitelist : Add a PCI device in white list.
Only use the specified PCI devices. The argument format
@@ -216,7 +225,8 @@ Description: Execute performance test with Parallel_atq type of stage in multi-f
# ./build/dpdk-eventdev_pipeline -c 0xe00000 -w eventdev_device_bus_id -w device0_bus_id -w device1_bus_id -w device2_bus_id -w device3_bus_id -- -w 0xc00000 -n=0 -p --dump
- Parameters:
+ Parameters::
+
-c, COREMASK : Hexadecimal bitmask of cores to run on
-w, --pci-whitelist : Add a PCI device in white list.
Only use the specified PCI devices. The argument format
@@ -240,7 +250,8 @@ Description: Execute performance test with Ordered_atq type of stage in multi-fl
# ./build/dpdk-eventdev_pipeline -c 0xe00000 -w eventdev_device_bus_id -w device0_bus_id -w device1_bus_id -w device2_bus_id -w device3_bus_id -- -w 0xc00000 -n=0 -o --dump
- Parameters:
+ Parameters::
+
-c, COREMASK : Hexadecimal bitmask of cores to run on
-w, --pci-whitelist : Add a PCI device in white list.
Only use the specified PCI devices. The argument format
@@ -254,4 +265,4 @@ Description: Execute performance test with Ordered_atq type of stage in multi-fl
2. Use Ixia to send huge number of packets(with same 5-tuple and different 5-tuple)
-3. Observe the speed of packets received(Rx-rate) on Ixia.
+3. Observe the speed of packets received(Rx-rate) on Ixia.
\ No newline at end of file
--
2.17.2
^ permalink raw reply [flat|nested] 4+ messages in thread* [dts] [PATCH V1 2/2] test_plans/index: append eventdev_pipeline_perf
2019-06-12 9:00 [dts] [PATCH V1 1/2] test_plans/eventdev_pipeline_perf: fix build warnings Wenjie Li
@ 2019-06-12 9:00 ` Wenjie Li
2019-06-13 9:11 ` Tu, Lijuan
2019-06-13 9:11 ` [dts] [PATCH V1 1/2] test_plans/eventdev_pipeline_perf: fix build warnings Tu, Lijuan
1 sibling, 1 reply; 4+ messages in thread
From: Wenjie Li @ 2019-06-12 9:00 UTC (permalink / raw)
To: dts; +Cc: Wenjie Li
append new test plan to index.
Signed-off-by: Wenjie Li <wenjiex.a.li@intel.com>
---
test_plans/index.rst | 1 +
1 file changed, 1 insertion(+)
diff --git a/test_plans/index.rst b/test_plans/index.rst
index 6936602..3e857ee 100644
--- a/test_plans/index.rst
+++ b/test_plans/index.rst
@@ -183,6 +183,7 @@ The following are the test plans for the DPDK DTS automated test system.
virtio_unit_cryptodev_func_test_plan
virtio_user_for_container_networking_test_plan
eventdev_perf_test_plan
+ eventdev_pipeline_perf_test_plan
unit_tests_cmdline_test_plan
unit_tests_crc_test_plan
--
2.17.2
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [dts] [PATCH V1 2/2] test_plans/index: append eventdev_pipeline_perf
2019-06-12 9:00 ` [dts] [PATCH V1 2/2] test_plans/index: append eventdev_pipeline_perf Wenjie Li
@ 2019-06-13 9:11 ` Tu, Lijuan
0 siblings, 0 replies; 4+ messages in thread
From: Tu, Lijuan @ 2019-06-13 9:11 UTC (permalink / raw)
To: Li, WenjieX A, dts; +Cc: Li, WenjieX A
Applied, thanks
> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of Wenjie Li
> Sent: Wednesday, June 12, 2019 5:00 PM
> To: dts@dpdk.org
> Cc: Li, WenjieX A <wenjiex.a.li@intel.com>
> Subject: [dts] [PATCH V1 2/2] test_plans/index: append
> eventdev_pipeline_perf
>
> append new test plan to index.
>
> Signed-off-by: Wenjie Li <wenjiex.a.li@intel.com>
> ---
> test_plans/index.rst | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/test_plans/index.rst b/test_plans/index.rst index
> 6936602..3e857ee 100644
> --- a/test_plans/index.rst
> +++ b/test_plans/index.rst
> @@ -183,6 +183,7 @@ The following are the test plans for the DPDK DTS
> automated test system.
> virtio_unit_cryptodev_func_test_plan
> virtio_user_for_container_networking_test_plan
> eventdev_perf_test_plan
> + eventdev_pipeline_perf_test_plan
>
> unit_tests_cmdline_test_plan
> unit_tests_crc_test_plan
> --
> 2.17.2
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [dts] [PATCH V1 1/2] test_plans/eventdev_pipeline_perf: fix build warnings
2019-06-12 9:00 [dts] [PATCH V1 1/2] test_plans/eventdev_pipeline_perf: fix build warnings Wenjie Li
2019-06-12 9:00 ` [dts] [PATCH V1 2/2] test_plans/index: append eventdev_pipeline_perf Wenjie Li
@ 2019-06-13 9:11 ` Tu, Lijuan
1 sibling, 0 replies; 4+ messages in thread
From: Tu, Lijuan @ 2019-06-13 9:11 UTC (permalink / raw)
To: Li, WenjieX A, dts; +Cc: Li, WenjieX A
Applied, thanks
> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of Wenjie Li
> Sent: Wednesday, June 12, 2019 5:00 PM
> To: dts@dpdk.org
> Cc: Li, WenjieX A <wenjiex.a.li@intel.com>
> Subject: [dts] [PATCH V1 1/2] test_plans/eventdev_pipeline_perf: fix build
> warnings
>
> fix some build warnings.
>
> Signed-off-by: Wenjie Li <wenjiex.a.li@intel.com>
> ---
> .../eventdev_pipeline_perf_test_plan.rst | 31 +++++++++++++------
> 1 file changed, 21 insertions(+), 10 deletions(-)
>
> diff --git a/test_plans/eventdev_pipeline_perf_test_plan.rst
> b/test_plans/eventdev_pipeline_perf_test_plan.rst
> index 619f9a3..0cd9110 100644
> --- a/test_plans/eventdev_pipeline_perf_test_plan.rst
> +++ b/test_plans/eventdev_pipeline_perf_test_plan.rst
> @@ -31,10 +31,12 @@ echo 24 > /proc/sys/vm/nr_hugepages Configure
> limits of Eventdev devices ====================================
> Set all eventdev devices sso and ssow limits to zero. Then set eventdev
> device under tests sso and ssow limits to non-zero values as per
> cores/queues requriments ::
> +
> echo 0 > /sys/bus/pci/devices/eventdev_device_bus_id/limits/sso
> echo 0 > /sys/bus/pci/devices/eventdev_device_bus_id/limits/ssow
>
> Example ::
> +
> echo 0 > /sys/bus/pci/devices/eventdev_device_bus_id/limits/tim
> echo 1 > /sys/bus/pci/devices/eventdev_device_bus_id/limits/npa
> echo 16 > /sys/bus/pci/devices/eventdev_device_bus_id/limits/sso
> @@ -51,7 +53,8 @@ Description: Execute performance test with Atomic_atq
> type of stage in multi-flo
>
> # ./build/dpdk-eventdev_pipeline -c 0xe00000 -w eventdev_device_bus_id
> -w device_bus_id -- -w 0xc00000 -n=0 --dump
>
> - Parameters:
> + Parameters::
> +
> -c, COREMASK : Hexadecimal bitmask of cores to run on
> -w, --pci-whitelist : Add a PCI device in white list.
> Only use the specified PCI devices. The argument format
> @@ -74,7 +77,8 @@ Description: Execute performance test with Parallel_atq
> type of stage in multi-f
>
> # ./build/dpdk-eventdev_pipeline -c 0xe00000 -w eventdev_device_bus_id
> -w device_bus_id -- -w 0xc00000 -n=0 -p --dump
>
> - Parameters:
> + Parameters::
> +
> -c, COREMASK : Hexadecimal bitmask of cores to run on
> -w, --pci-whitelist : Add a PCI device in white list.
> Only use the specified PCI devices. The argument format
> @@ -98,7 +102,8 @@ Description: Execute performance test with
> Ordered_atq type of stage in multi-fl
>
> # ./build/dpdk-eventdev_pipeline -c 0xe00000 -w eventdev_device_bus_id
> -w device_bus_id -- -w 0xc00000 -n=0 -o --dump
>
> - Parameters:
> + Parameters::
> +
> -c, COREMASK : Hexadecimal bitmask of cores to run on
> -w, --pci-whitelist : Add a PCI device in white list.
> Only use the specified PCI devices. The argument format
> @@ -122,7 +127,8 @@ Description: Execute performance test with
> Atomic_atq type of stage in multi-flo
>
> # ./build/dpdk-eventdev_pipeline -c 0xe00000 -w eventdev_device_bus_id
> -w device0_bus_id -w device1_bus_id -- -w 0xc00000 -n=0 --dump
>
> - Parameters:
> + Parameters::
> +
> -c, COREMASK : Hexadecimal bitmask of cores to run on
> -w, --pci-whitelist : Add a PCI device in white list.
> Only use the specified PCI devices. The argument format
> @@ -145,7 +151,8 @@ Description: Execute performance test with
> Parallel_atq type of stage in multi-f
>
> # ./build/dpdk-eventdev_pipeline -c 0xe00000 -w eventdev_device_bus_id
> -w device0_bus_id -w device1_bus_id -- -w 0xc00000 -n=0 -p --dump
>
> - Parameters:
> + Parameters::
> +
> -c, COREMASK : Hexadecimal bitmask of cores to run on
> -w, --pci-whitelist : Add a PCI device in white list.
> Only use the specified PCI devices. The argument format
> @@ -169,7 +176,8 @@ Description: Execute performance test with
> Ordered_atq type of stage in multi-fl
>
> # ./build/dpdk-eventdev_pipeline -c 0xe00000 -w eventdev_device_bus_id
> -w device0_bus_id -w device1_bus_id -- -w 0xc00000 -n=0 -o --dump
>
> - Parameters:
> + Parameters::
> +
> -c, COREMASK : Hexadecimal bitmask of cores to run on
> -w, --pci-whitelist : Add a PCI device in white list.
> Only use the specified PCI devices. The argument format
> @@ -193,7 +201,8 @@ Description: Execute performance test with
> Atomic_atq type of stage in multi-flo
>
> # ./build/dpdk-eventdev_pipeline -c 0xe00000 -w eventdev_device_bus_id
> -w device0_bus_id -w device1_bus_id -w device2_bus_id -w device3_bus_id -
> - -w 0xc00000 -n=0 --dump
>
> - Parameters:
> + Parameters::
> +
> -c, COREMASK : Hexadecimal bitmask of cores to run on
> -w, --pci-whitelist : Add a PCI device in white list.
> Only use the specified PCI devices. The argument format
> @@ -216,7 +225,8 @@ Description: Execute performance test with
> Parallel_atq type of stage in multi-f
>
> # ./build/dpdk-eventdev_pipeline -c 0xe00000 -w eventdev_device_bus_id
> -w device0_bus_id -w device1_bus_id -w device2_bus_id -w device3_bus_id -
> - -w 0xc00000 -n=0 -p --dump
>
> - Parameters:
> + Parameters::
> +
> -c, COREMASK : Hexadecimal bitmask of cores to run on
> -w, --pci-whitelist : Add a PCI device in white list.
> Only use the specified PCI devices. The argument format
> @@ -240,7 +250,8 @@ Description: Execute performance test with
> Ordered_atq type of stage in multi-fl
>
> # ./build/dpdk-eventdev_pipeline -c 0xe00000 -w eventdev_device_bus_id
> -w device0_bus_id -w device1_bus_id -w device2_bus_id -w device3_bus_id -
> - -w 0xc00000 -n=0 -o --dump
>
> - Parameters:
> + Parameters::
> +
> -c, COREMASK : Hexadecimal bitmask of cores to run on
> -w, --pci-whitelist : Add a PCI device in white list.
> Only use the specified PCI devices. The argument format
> @@ -254,4 +265,4 @@ Description: Execute performance test with
> Ordered_atq type of stage in multi-fl
>
> 2. Use Ixia to send huge number of packets(with same 5-tuple and different
> 5-tuple)
>
> -3. Observe the speed of packets received(Rx-rate) on Ixia.
> +3. Observe the speed of packets received(Rx-rate) on Ixia.
> \ No newline at end of file
> --
> 2.17.2
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2019-06-13 9:11 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-06-12 9:00 [dts] [PATCH V1 1/2] test_plans/eventdev_pipeline_perf: fix build warnings Wenjie Li
2019-06-12 9:00 ` [dts] [PATCH V1 2/2] test_plans/index: append eventdev_pipeline_perf Wenjie Li
2019-06-13 9:11 ` Tu, Lijuan
2019-06-13 9:11 ` [dts] [PATCH V1 1/2] test_plans/eventdev_pipeline_perf: fix build warnings Tu, Lijuan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).