From: lihong <lihongx.ma@intel.com>
To: dts@dpdk.org
Cc: yinan.wang@intel.com, lihong <lihongx.ma@intel.com>
Subject: [dts] [PATCH V2] tests: add testsuite pvp virtio user 2M hugepages
Date: Thu, 27 Jun 2019 07:34:08 +0800 [thread overview]
Message-ID: <1561592048-2504-1-git-send-email-lihongx.ma@intel.com> (raw)
Signed-off-by: lihong <lihongx.ma@intel.com>
---
tests/TestSuite_pvp_virtio_user_2M_hugepages.py | 180 ++++++++++++++++++++++++
1 file changed, 180 insertions(+)
create mode 100644 tests/TestSuite_pvp_virtio_user_2M_hugepages.py
diff --git a/tests/TestSuite_pvp_virtio_user_2M_hugepages.py b/tests/TestSuite_pvp_virtio_user_2M_hugepages.py
new file mode 100644
index 0000000..56f285a
--- /dev/null
+++ b/tests/TestSuite_pvp_virtio_user_2M_hugepages.py
@@ -0,0 +1,180 @@
+# BSD LICENSE
+#
+# Copyright(c) <2019> Intel Corporation.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+"""
+DPDK Test suite.
+vhost/virtio-user pvp with 2M hugepage.
+"""
+
+import utils
+import time
+from test_case import TestCase
+from settings import HEADER_SIZE
+from pktgen import PacketGeneratorHelper
+
+
+class TestPVPVirtioWith2Mhuge(TestCase):
+
+ def set_up_all(self):
+ """
+ Run at the start of each test suite.
+ """
+ hugepages_size = self.dut.send_expect("awk '/Hugepagesize/ {print $2}' /proc/meminfo", "# ")
+ self.verify(int(hugepages_size) == 2048, "Please config you hugepages_size to 2048")
+ self.core_config = "1S/4C/1T"
+ self.dut_ports = self.dut.get_ports()
+ self.ports_socket = self.dut.get_numa_id(self.dut_ports[0])
+ self.cores_num = len([n for n in self.dut.cores if int(n['socket']) ==
+ self.ports_socket])
+ self.verify(len(self.dut_ports) >= 1, "Insufficient ports for testing")
+ self.verify(self.cores_num >= 4,
+ "There has not enought cores to test this suite %s" %
+ self.suite_name)
+
+ self.core_list = self.dut.get_core_list(
+ self.core_config, socket=self.ports_socket)
+ self.core_list_virtio_user = self.core_list[0:2]
+ self.core_list_vhost_user = self.core_list[2:4]
+ self.core_mask_virtio_user = utils.create_mask(self.core_list_virtio_user)
+ self.core_mask_vhost_user = utils.create_mask(self.core_list_vhost_user)
+ self.mem_channels = self.dut.get_memory_channels()
+ self.dst_mac = self.dut.get_mac_address(self.dut_ports[0])
+ self.header_size = HEADER_SIZE['eth'] + HEADER_SIZE['ip'] + HEADER_SIZE['tcp']
+ self.frame_sizes = [64, 128, 256, 512, 1024, 1518]
+ self.logger.info("You can config packet_size in file %s.cfg," % self.suite_name + \
+ " in region 'suite' like packet_sizes=[64, 128, 256]")
+ if 'packet_sizes' in self.get_suite_cfg():
+ self.frame_sizes = self.get_suite_cfg()['packet_sizes']
+ # create an instance to set stream field setting
+ self.pktgen_helper = PacketGeneratorHelper()
+
+ def set_up(self):
+ """
+ Run before each test case.
+ """
+ self.dut.send_expect("rm -rf ./vhost-net*", "# ")
+ self.dut.send_expect("killall -s INT testpmd", "# ")
+ self.vhost_user = self.dut.new_session(suite="vhost-user")
+ self.virtio_user = self.dut.new_session(suite="virtio-user")
+ # Prepare the result table
+ self.table_header = ['Frame']
+ self.table_header.append("Mode")
+ self.table_header.append("Mpps")
+ self.table_header.append("Queue Num")
+ self.table_header.append("% linerate")
+ self.result_table_create(self.table_header)
+
+ def send_and_verify(self):
+ """
+ Send packet with packet generator and verify
+ """
+ for frame_size in self.frame_sizes:
+ payload_size = frame_size - self.header_size
+ tgen_input = []
+ rx_port = self.tester.get_local_port(self.dut_ports[0])
+ tx_port = self.tester.get_local_port(self.dut_ports[0])
+ self.tester.scapy_append(
+ 'wrpcap("vhost.pcap", [Ether(dst="%s")/IP()/TCP()/("X"*%d)])' %
+ (self.dst_mac, payload_size))
+ tgen_input.append((tx_port, rx_port, "vhost.pcap"))
+
+ self.tester.scapy_execute()
+ self.tester.pktgen.clear_streams()
+ streams = self.pktgen_helper.prepare_stream_from_tginput(tgen_input, 100,
+ None, self.tester.pktgen)
+ _, pps = self.tester.pktgen.measure_throughput(stream_ids=streams)
+ Mpps = pps / 1000000.0
+ self.verify(Mpps > 0, "%s can not receive packets" % (self.running_case))
+ throughput = Mpps * 100 / \
+ float(self.wirespeed(self.nic, 64, 1))
+
+ results_row = [frame_size]
+ results_row.append("2M Hugepages")
+ results_row.append(Mpps)
+ results_row.append("1")
+ results_row.append(throughput)
+ self.result_table_add(results_row)
+
+ def start_testpmd_as_vhost(self):
+ """
+ start testpmd on vhost
+ """
+ command_line_client = "%s/app/testpmd -c %s -n %d " + \
+ "--socket-mem 1024,1024 --file-prefix=vhost " + \
+ "--vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i"
+ command_line_client = command_line_client % (self.target,
+ self.core_mask_vhost_user, self.mem_channels)
+ self.vhost_user.send_expect(command_line_client, "testpmd> ", 120)
+ self.vhost_user.send_expect("start", "testpmd> ", 120)
+
+ def start_testpmd_as_virtio(self):
+ """
+ start testpmd on virtio
+ """
+ command_line_user = "./%s/app/testpmd -n %d -c %s " + \
+ "--no-pci --socket-mem 1024,1024 " + \
+ "--file-prefix=virtio-user --single-file-segments " + \
+ "--vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net,queues=1 -- -i"
+ command_line_user = command_line_user % (self.target,
+ self.mem_channels, self.core_mask_virtio_user)
+ self.virtio_user.send_expect(command_line_user, "testpmd> ", 120)
+ self.virtio_user.send_expect("start", "testpmd> ", 120)
+
+ def close_all_apps(self):
+ """
+ close testpmd and vhost-switch
+ """
+ self.virtio_user.send_expect("quit", "# ", 60)
+ self.vhost_user.send_expect("quit", "# ", 60)
+ self.dut.close_session(self.vhost_user)
+ self.dut.close_session(self.virtio_user)
+
+ def test_perf_pvp_virtio_user_with_2M_hugepages(self):
+ """
+ Basic test for virtio-user 2M hugepage
+ """
+ self.start_testpmd_as_vhost()
+ self.start_testpmd_as_virtio()
+ self.send_and_verify()
+ self.result_table_print()
+ self.close_all_apps()
+
+ def tear_down(self):
+ """
+ Run after each test case.
+ """
+ self.dut.send_expect("killall -s INT testpmd", "# ")
+
+ def tear_down_all(self):
+ """
+ Run after each test suite.
+ """
+ pass
--
2.7.4
next reply other threads:[~2019-06-27 6:56 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-26 23:34 lihong [this message]
2019-06-27 8:24 ` Wang, Yinan
2019-07-02 7:30 ` Ma, LihongX
2019-07-10 6:31 ` Tu, Lijuan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1561592048-2504-1-git-send-email-lihongx.ma@intel.com \
--to=lihongx.ma@intel.com \
--cc=dts@dpdk.org \
--cc=yinan.wang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).