From: Peng Yuan <yuan.peng@intel.com>
To: dts@dpdk.org
Cc: Peng Yuan <yuan.peng@intel.com>
Subject: [dts] [PATCH] test_plans: Add a case to vxlan_test_plan.rst
Date: Mon, 1 Jul 2019 18:12:47 +0800 [thread overview]
Message-ID: <1561975967-117447-1-git-send-email-yuan.peng@intel.com> (raw)
Add a case to vxlan_test_plan.rst
Signed-off-by: Peng Yuan <yuan.peng@intel.com>
diff --git a/test_plans/vxlan_test_plan.rst b/test_plans/vxlan_test_plan.rst
index 83c99ac..60cfec9 100644
--- a/test_plans/vxlan_test_plan.rst
+++ b/test_plans/vxlan_test_plan.rst
@@ -33,7 +33,6 @@
=====================
Fortville Vxlan Tests
=====================
-
Cloud providers build virtual network overlays over existing network
infrastructure that provide tenant isolation and scaling. Tunneling
layers added to the packets carry the virtual networking frames over
@@ -58,7 +57,7 @@ Test Case: Vxlan ipv4 packet detect
===================================
Start testpmd with tunneling packet type to vxlan::
- testpmd -c ffff -n 4 -- -i --rxq=4 --txq=4 --nb-cores=8 --nb-ports=2 --tx-offloads=0x8fff
+ testpmd -c ffff -n 4 -- -i --rxq=4 --txq=4 --nb-cores=8 --nb-ports=2
Set rxonly packet forwarding mode and enable verbose log::
@@ -85,13 +84,11 @@ Send packet as table listed and check dumped packet type the same as column
| Yes | Ipv4 | Vxlan | Yes | Ipv4 | Udp | PKT_RX_IPV4_HDR_EXT | None |
+------------+----------+-----------+------------+----------+-----------+---------------------+-----------+
-
-
Test Case: Vxlan ipv6 packet detect
===================================
Start testpmd with tunneling packet type to vxlan::
- testpmd -c ffff -n 4 -- -i --disable-rss --rxq=4 --txq=4 --nb-cores=8 --nb-ports=2 --tx-offloads=0x8fff
+ testpmd -c ffff -n 4 -- -i --disable-rss --rxq=4 --txq=4 --nb-cores=8 --nb-ports=2
Set rxonly packet forwarding mode and enable verbose log::
@@ -118,13 +115,11 @@ column "Rx packet type".
| Yes | Ipv6 | Vxlan | Yes | Ipv6 | Udp | PKT_RX_IPV6_HDR_EXT | None |
+------------+----------+-----------+------------+----------+-----------+---------------------+-----------+
-
Test Case: Vxlan ipv4 checksum offload
======================================
-
Start testpmd with tunneling packet type to vxlan::
- testpmd -c ffff -n 4 -- -i --rxq=4 --txq=4 --nb-cores=8 --nb-ports=2 --tx-offloads=0x8fff
+ testpmd -c ffff -n 4 -- -i --rxq=4 --txq=4 --nb-cores=8 --nb-ports=2
Set csum packet forwarding mode and enable verbose log::
@@ -216,7 +211,6 @@ checksum corrected and there's correct l4 chksum error counter increased.
| Yes | Ipv4 | Vxlan | None | Ipv4 | Bad Sctp |
+------------+----------+-----------+------------+----------+-----------+
-
Test Case: Vxlan ipv6 checksum offload
======================================
Start testpmd with tunneling packet type::
@@ -285,12 +279,12 @@ increased.
| Yes | Ipv6 | Vxlan | Yes | Ipv4 | Bad Sctp |
+------------+----------+-----------+------------+----------+-----------+
-Test Case: Cloud Filter
+Test Case: Tunnel Filter
========================
Start testpmd with tunneling packet type to vxlan and disable receive side
scale for hardware limitation::
- testpmd -c ffff -n 4 -- -i --disable-rss --rxq=4 --txq=4 --nb-cores=8 --nb-ports=2 --tx-offloads=0x8fff
+ testpmd -c ffff -n 4 -- -i --disable-rss --rxq=4 --txq=4 --nb-cores=8 --nb-ports=2
Set rxonly packet forwarding mode and enable verbose log::
@@ -319,12 +313,18 @@ Then send one packet and check packet was forwarded into right queue.
| No | No | No | No | Yes | No | 1 |
+------------+------------+------------+----------+----------+--------+-------+
-
Add Cloud filter to max number will be failed.
Remove Cloud filter which has been added. Then send one packet and check
packet was received in queue 0.
+Test Case: Tunnel Filter invalid
+================================
+Start testpmd with tunneling packet type to vxlan and disable receive side
+scale for hardware limitation::
+
+ testpmd -c ffff -n 4 -- -i --disable-rss --rxq=4 --txq=4 --nb-cores=8 --nb-ports=2
+
Add Cloud filter with invalid Mac address "00:00:00:00:01" will be failed.
Add Cloud filter with invalid ip address "192.168.1.256" will be failed.
@@ -337,7 +337,6 @@ Add Cloud filter with invalid queue id "64" will be failed.
Test Case: Vxlan Checksum Offload Performance Benchmarking
==========================================================
-
The throughput is measured for each of these cases for vxlan tx checksum
offload of "all by software", "L3 offload by hardware", "L4 offload by
hardware", "l3&l4 offload by hardware".
--
2.14.3
next reply other threads:[~2019-07-01 10:38 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-01 10:12 Peng Yuan [this message]
2019-07-03 5:52 ` Tu, Lijuan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1561975967-117447-1-git-send-email-yuan.peng@intel.com \
--to=yuan.peng@intel.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).