From: lihong <lihongx.ma@intel.com>
To: dts@dpdk.org
Cc: yinan.wang@intel.com, lihong <lihongx.ma@intel.com>
Subject: [dts] [PATCH V1 2/2][vhost gro] tests: add testsuite vhost gro
Date: Thu, 4 Jul 2019 05:42:20 +0800 [thread overview]
Message-ID: <1562190140-24335-2-git-send-email-lihongx.ma@intel.com> (raw)
In-Reply-To: <1562190140-24335-1-git-send-email-lihongx.ma@intel.com>
Signed-off-by: lihong <lihongx.ma@intel.com>
---
tests/TestSuite_dpdk_gro_lib.py | 381 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 381 insertions(+)
create mode 100644 tests/TestSuite_dpdk_gro_lib.py
diff --git a/tests/TestSuite_dpdk_gro_lib.py b/tests/TestSuite_dpdk_gro_lib.py
new file mode 100644
index 0000000..e3561c0
--- /dev/null
+++ b/tests/TestSuite_dpdk_gro_lib.py
@@ -0,0 +1,381 @@
+# BSD LICENSE
+#
+# Copyright(c) <2019> Intel Corporation.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+"""
+DPDK Test suite.
+
+Vhost gro test suite.
+"""
+import re
+import time
+import utils
+from test_case import TestCase
+from virt_common import VM
+from config import UserConf
+
+
+class TestVhostGRO(TestCase):
+
+ def set_up_all(self):
+ # This suite will not use the port config in ports.cfg
+ # it will use the port config in vhost_gro.cfg
+ # And it need two interface reconnet in DUT
+ # Get and verify the ports
+ self.dut_ports = self.dut.get_ports()
+ self.cores = self.dut.get_core_list("1S/2C/1T", socket=1)
+ # unbind the port which config in ports.cfg
+ for i in self.dut_ports:
+ port = self.dut.ports_info[i]['port']
+ port.bind_driver()
+
+ # get and bind the port config in vhost_gro.cfg
+ config = UserConf('conf/vhost_gro.cfg')
+ conf = config.conf
+ section = config.get_sections()
+ self.verify('peerconf' in section,
+ 'Pls config peer info about intf in conf file vhost_gro.cfg')
+ params = conf._sections['peerconf']
+ self.pci = params['pci']
+ self.pci_drv = params['pci_drv']
+ self.peer_pci = params['peer']
+ self.nic_in_kernel = params['peer_intf']
+ self.dut.send_expect(
+ "./usertools/dpdk-devbind.py -b igb_uio %s" %
+ self.pci, '#', 30)
+
+ # Set the params for VM
+ self.virtio_ip1 = "1.1.1.2"
+ self.virtio_mac1 = "52:54:00:00:00:01"
+ self.memory_channel = self.dut.get_memory_channels()
+ if len(set([int(core['socket']) for core in self.dut.cores])) == 1:
+ self.socket_mem = '1024'
+ else:
+ self.socket_mem = '1024,1024'
+ self.prepare_dpdk()
+
+ def set_up(self):
+ #
+ # Run before each test case.
+ #
+ # Clean the execution ENV
+ self.dut.send_expect("rm -rf ./vhost-net*", "#")
+ self.dut.send_expect("killall -s INT testpmd", "#")
+ self.dut.send_expect("killall -s INT qemu-system-x86_64", "#")
+
+ def launch_testpmd_gro_on(self, mode=1):
+ #
+ # Launch the vhost sample with different parameters
+ # mode 1 : tcp traffic light mode
+ # mode 2 : tcp traffic heavy mode
+ # mode 3 : vxlan traffic light mode
+ # mode 4 : tcp traffic flush 4
+ self.testcmd = self.target + "/app/testpmd -c %s -n %d --socket-mem %s --legacy-mem" \
+ + " --vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i --enable-hw-vlan-strip --tx-offloads=0x00" \
+ + " --txd=1024 --rxd=1024"
+ self.coremask = utils.create_mask(self.cores)
+ self.testcmd_start = self.testcmd % (
+ self.coremask, self.memory_channel, self.socket_mem)
+ self.vhost_user = self.dut.new_session(suite="user")
+ self.vhost_user.send_expect(self.testcmd_start, "testpmd> ", 120)
+ self.vhost_user.send_expect("set fwd csum", "testpmd> ", 120)
+ self.vhost_user.send_expect("stop", "testpmd> ", 120)
+ self.vhost_user.send_expect("port stop 0", "testpmd> ", 120)
+ self.vhost_user.send_expect("port stop 1", "testpmd> ", 120)
+ self.vhost_user.send_expect("csum set tcp hw 0", "testpmd> ", 120)
+ self.vhost_user.send_expect("csum set ip hw 0", "testpmd> ", 120)
+ self.vhost_user.send_expect("csum set tcp hw 1", "testpmd> ", 120)
+ self.vhost_user.send_expect("csum set ip hw 1", "testpmd> ", 120)
+ if(mode == 1):
+ self.vhost_user.send_expect("set port 0 gro on", "testpmd> ", 120)
+ self.vhost_user.send_expect("set gro flush 1", "testpmd> ", 120)
+ if(mode == 2):
+ self.vhost_user.send_expect("set port 0 gro on", "testpmd> ", 120)
+ self.vhost_user.send_expect("set gro flush 2", "testpmd> ", 120)
+ if (mode == 3):
+ self.vhost_user.send_expect("csum parse-tunnel on 1", "testpmd> ", 120)
+ self.vhost_user.send_expect("csum parse-tunnel on 0", "testpmd> ", 120)
+ self.vhost_user.send_expect("csum set outer-ip hw 0", "testpmd> ", 120)
+ self.vhost_user.send_expect("set port 0 gro on", "testpmd> ", 120)
+ self.vhost_user.send_expect("set gro flush 2", "testpmd> ", 120)
+ else:
+ self.vhost_user.send_expect("set port 0 gro on", "testpmd> ", 120)
+ self.vhost_user.send_expect("set gro flush 4", "testpmd> ", 120)
+ self.vhost_user.send_expect("port start 0", "testpmd> ", 120)
+ self.vhost_user.send_expect("port start 1", "testpmd> ", 120)
+ self.vhost_user.send_expect("start", "testpmd> ", 120)
+
+ def set_testpmd_gro_off(self):
+ #
+ # Launch the vhost sample with different parameters
+ #
+ self.vhost_user.send_expect("stop", "testpmd> ", 120)
+ self.vhost_user.send_expect("set port 0 gro off", "testpmd> ", 120)
+ self.vhost_user.send_expect("start", "testpmd> ", 120)
+
+ def quit_testpmd(self):
+ # Quit testpmd and close temp ssh session
+ self.vhost_user.send_expect("quit", "#", 120)
+ self.dut.close_session(self.vhost_user)
+
+ def config_kernel_nic_host(self, mode=1):
+ if (mode == 0):
+ self.dut.send_expect("ip netns del ns1", "#")
+ self.dut.send_expect("ip netns add ns1", "#")
+ self.dut.send_expect(
+ "ip link set %s netns ns1" %
+ self.nic_in_kernel, "#")
+ self.dut.send_expect(
+ "ip netns exec ns1 ifconfig %s 1.1.1.8 up" %
+ self.nic_in_kernel, "#")
+ self.dut.send_expect(
+ "ip netns exec ns1 ethtool -K %s tso on" %
+ self.nic_in_kernel, "#")
+ if (mode == 1):
+ self.dut.send_expect("ip netns del ns1", "#")
+ self.dut.send_expect("ip netns add ns1", "#")
+ self.dut.send_expect(
+ "ip link set %s netns ns1" %
+ self.nic_in_kernel, "#")
+ self.dut.send_expect(
+ "ip netns exec ns1 ifconfig %s 1.1.2.4/24 up" %
+ self.nic_in_kernel, "#")
+ self.dut.send_expect(
+ "ip netns exec ns1 ip link add vxlan1 type vxlan id 42 dev %s dstport 4789" %
+ self.nic_in_kernel, "#")
+ self.dut.send_expect(
+ "ip netns exec ns1 bridge fdb append to 00:00:00:00:00:00 dst 1.1.2.3 dev vxlan1", "#")
+ self.dut.send_expect(
+ "ip netns exec ns1 ip addr add 50.1.1.1/24 dev vxlan1", "#")
+ self.dut.send_expect(
+ "ip netns exec ns1 ip link set up dev vxlan1", "#")
+
+ def prepare_dpdk(self):
+ #
+ # Changhe the testpmd checksum fwd code for mac change
+ self.dut.send_expect(
+ "cp ./app/test-pmd/csumonly.c ./app/test-pmd/csumonly_backup.c",
+ "#")
+ self.dut.send_expect(
+ "cp ./drivers/net/vhost/rte_eth_vhost.c ./drivers/net/vhost/rte_eth_vhost-backup.c",
+ "#")
+ self.dut.send_expect(
+ "sed -i '/ether_addr_copy(&peer_eth/i\#if 0' ./app/test-pmd/csumonly.c", "#")
+ self.dut.send_expect(
+ "sed -i '/parse_ethernet(eth_hdr, &info/i\#endif' ./app/test-pmd/csumonly.c", "#")
+ # change offload of vhost
+ tx_offload = 'DEV_TX_OFFLOAD_VLAN_INSERT | ' + \
+ 'DEV_TX_OFFLOAD_UDP_CKSUM | ' + \
+ 'DEV_TX_OFFLOAD_TCP_CKSUM | ' + \
+ 'DEV_TX_OFFLOAD_IPV4_CKSUM | ' + \
+ 'DEV_TX_OFFLOAD_TCP_TSO;'
+ rx_offload = 'DEV_RX_OFFLOAD_VLAN_STRIP | ' + \
+ 'DEV_RX_OFFLOAD_TCP_CKSUM | ' + \
+ 'DEV_RX_OFFLOAD_UDP_CKSUM | ' + \
+ 'DEV_RX_OFFLOAD_IPV4_CKSUM | ' + \
+ 'DEV_RX_OFFLOAD_TCP_LRO;'
+ self.dut.send_expect(
+ "sed -i 's/DEV_TX_OFFLOAD_VLAN_INSERT;/%s/' drivers/net/vhost/rte_eth_vhost.c" % tx_offload, "#")
+ self.dut.send_expect(
+ "sed -i 's/DEV_RX_OFFLOAD_VLAN_STRIP;/%s/' drivers/net/vhost/rte_eth_vhost.c" % rx_offload, "#")
+ self.dut.build_install_dpdk(self.dut.target)
+
+ def unprepare_dpdk(self):
+ # Recovery the DPDK code to original
+ self.dut.send_expect(
+ "cp ./app/test-pmd/csumonly_backup.c ./app/test-pmd/csumonly.c ",
+ "#")
+ self.dut.send_expect(
+ "cp ./drivers/net/vhost/rte_eth_vhost-backup.c ./drivers/net/vhost/rte_eth_vhost.c ",
+ "#")
+ self.dut.send_expect("rm -rf ./app/test-pmd/csumonly_backup.c", "#")
+ self.dut.send_expect("rm -rf ./drivers/net/vhost/rte_eth_vhost-backup.c", "#")
+ self.dut.build_install_dpdk(self.dut.target)
+
+ def start_vm(self):
+ self.vm1 = VM(self.dut, 'vm0', 'vhost_gro')
+ vm_params_1 = {}
+ vm_params_1['driver'] = 'vhost-user'
+ vm_params_1['opt_path'] = './vhost-net'
+ vm_params_1['opt_mac'] = self.virtio_mac1
+ vm_params_1[
+ 'opt_settings'] = 'mrg_rxbuf=on,csum=off,gso=off,host_tso4=on,guest_tso4=on'
+ self.vm1.set_vm_device(**vm_params_1)
+ try:
+ self.vm1_dut = self.vm1.start()
+ if self.vm1_dut is None:
+ raise Exception("Set up VM ENV failed")
+ except Exception as e:
+ print utils.RED("Failure for %s" % str(e))
+ self.vm1_dut.restore_interfaces()
+
+ def iperf_result_verify(self, run_info):
+ '''
+ Get the iperf test result
+ '''
+ fmsg = self.dut.send_expect("cat /root/iperf_client.log", "#")
+ print fmsg
+ iperfdata = re.compile('[\d+]*.[\d+]* [M|G|K]bits/sec').findall(fmsg)
+ print iperfdata
+ self.verify(iperfdata, 'There no data about this case')
+ self.result_table_create(['Data', 'Unit'])
+ results_row = [run_info]
+ results_row.append(iperfdata[-1])
+ self.result_table_add(results_row)
+ self.result_table_print()
+ self.output_result = "Iperf throughput is %s" % iperfdata[-1]
+ self.logger.info(self.output_result)
+
+ def test_vhost_gro_tcp_lightmode(self):
+ self.config_kernel_nic_host(0)
+ self.launch_testpmd_gro_on()
+ self.start_vm()
+ time.sleep(5)
+ self.dut.get_session_output(timeout=2)
+ # Get the virtio-net device name
+ for port in self.vm1_dut.ports_info:
+ self.vm1_intf = port['intf']
+ # Start the Iperf test
+ self.vm1_dut.send_expect('ifconfig -a', '#', 30)
+ self.vm1_dut.send_expect(
+ 'ifconfig %s %s' %
+ (self.vm1_intf, self.virtio_ip1), '#', 10)
+ self.vm1_dut.send_expect('ifconfig %s up' % self.vm1_intf, '#', 10)
+ self.vm1_dut.send_expect(
+ 'ethtool -K %s gro off' % (self.vm1_intf), '#', 10)
+ self.vm1_dut.send_expect('iperf -s', '', 10)
+ self.dut.send_expect('rm /root/iperf_client.log', '#', 10)
+ self.dut.send_expect(
+ 'ip netns exec ns1 iperf -c %s -i 1 -t 10 -P 1> /root/iperf_client.log &' %
+ (self.virtio_ip1), '', 180)
+ time.sleep(30)
+ self.iperf_result_verify('GRO lib')
+ print "the GRO lib %s " % (self.output_result)
+ self.dut.send_expect('rm /root/iperf_client.log', '#', 10)
+ # Turn off DPDK GRO lib and Kernel GRO off
+ self.set_testpmd_gro_off()
+ self.dut.send_expect(
+ 'ip netns exec ns1 iperf -c %s -i 1 -t 10 -P 1 > /root/iperf_client.log &' %
+ (self.virtio_ip1), '', 180)
+ time.sleep(30)
+ self.iperf_result_verify('Kernel GRO')
+ print "the Kernel GRO %s " % (self.output_result)
+ self.dut.send_expect('rm /root/iperf_client.log', '#', 10)
+ self.quit_testpmd()
+ self.dut.send_expect("killall -s INT qemu-system-x86_64", "#")
+
+ def test_vhost_gro_tcp_heavymode(self):
+ self.config_kernel_nic_host(0)
+ self.heavymode = 2
+ self.launch_testpmd_gro_on(self.heavymode)
+ self.start_vm()
+ time.sleep(5)
+ self.dut.get_session_output(timeout=2)
+ # Get the virtio-net device name
+ for port in self.vm1_dut.ports_info:
+ self.vm1_intf = port['intf']
+ # Start the Iperf test
+ self.vm1_dut.send_expect('ifconfig -a', '#', 30)
+ self.vm1_dut.send_expect(
+ 'ifconfig %s %s' %
+ (self.vm1_intf, self.virtio_ip1), '#', 10)
+ self.vm1_dut.send_expect('ifconfig %s up' % self.vm1_intf, '#', 10)
+ self.vm1_dut.send_expect(
+ 'ethtool -K %s gro off' %
+ (self.vm1_intf), '#', 10)
+ self.vm1_dut.send_expect('iperf -s', '', 10)
+ self.dut.send_expect('rm /root/iperf_client.log', '#', 10)
+ self.dut.send_expect(
+ 'ip netns exec ns1 iperf -c %s -i 1 -t 10 -P 1> /root/iperf_client.log &' %
+ (self.virtio_ip1), '', 180)
+ time.sleep(30)
+ self.iperf_result_verify('GRO lib')
+ print "the GRO lib %s " % (self.output_result)
+ self.dut.send_expect('rm /root/iperf_client.log', '#', 10)
+ self.quit_testpmd()
+ self.dut.send_expect("killall -s INT qemu-system-x86_64", "#")
+
+ def test_vhost_gro_tcp_heavymode_flush4(self):
+ self.config_kernel_nic_host(0)
+ self.heavymode = 4
+ self.launch_testpmd_gro_on(self.heavymode)
+ self.start_vm()
+ time.sleep(5)
+ self.dut.get_session_output(timeout=2)
+ # Get the virtio-net device name
+ for port in self.vm1_dut.ports_info:
+ self.vm1_intf = port['intf']
+ # Start the Iperf test
+ self.vm1_dut.send_expect('ifconfig -a', '#', 30)
+ self.vm1_dut.send_expect(
+ 'ifconfig %s %s' %
+ (self.vm1_intf, self.virtio_ip1), '#', 10)
+ self.vm1_dut.send_expect('ifconfig %s up' % self.vm1_intf, '#', 10)
+ self.vm1_dut.send_expect(
+ 'ethtool -K %s gro off' %
+ (self.vm1_intf), '#', 10)
+ self.vm1_dut.send_expect('iperf -s', '', 10)
+ self.dut.send_expect('rm /root/iperf_client.log', '#', 10)
+ self.dut.send_expect(
+ 'ip netns exec ns1 iperf -c %s -i 1 -t 10 -P 1> /root/iperf_client.log &' %
+ (self.virtio_ip1), '', 180)
+ time.sleep(30)
+ self.iperf_result_verify('GRO lib')
+ print "the GRO lib %s " % (self.output_result)
+ self.dut.send_expect('rm /root/iperf_client.log', '#', 10)
+ self.quit_testpmd()
+ self.dut.send_expect("killall -s INT qemu-system-x86_64", "#")
+
+ def tear_down(self):
+ """
+ Run after each test case.
+ """
+ self.dut.send_expect("killall -s INT testpmd", "#")
+ self.dut.send_expect("killall -s INT qemu-system-x86_64", "#")
+ self.dut.send_expect("rm -rf ./vhost-net", "#")
+ time.sleep(2)
+ self.dut.send_expect("ip netns del ns1", "# ", 30)
+ self.dut.send_expect(
+ "./usertools/dpdk-devbind.py -u %s" % (self.peer_pci), '# ', 30)
+ self.dut.send_expect(
+ "./usertools/dpdk-devbind.py -b %s %s" %
+ (self.pci_drv, self.peer_pci), '# ', 30)
+
+ def tear_down_all(self):
+ """
+ Run after each test suite.
+ """
+ self.unprepare_dpdk()
+ self.dut.send_expect("ip netns del ns1", "# ", 30)
+ self.dut.send_expect(
+ "./usertools/dpdk-devbind.py -u %s" % (self.pci), '# ', 30)
+ self.dut.send_expect(
+ "./usertools/dpdk-devbind.py -b %s %s" %
+ (self.pci_drv, self.pci), '# ', 30)
--
2.7.4
next prev parent reply other threads:[~2019-07-04 5:04 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-03 21:42 [dts] [PATCH V1 1/2][vhost gro] conf: add conf file for gro and gso lihong
2019-07-03 21:42 ` lihong [this message]
2019-07-04 6:02 ` [dts] [PATCH V1 2/2][vhost gro] tests: add testsuite vhost gro Wang, Yinan
2019-07-04 6:37 ` Ma, LihongX
2019-07-10 5:54 ` Tu, Lijuan
2019-07-10 6:21 ` Ma, LihongX
2019-07-04 6:03 ` [dts] [PATCH V1 1/2][vhost gro] conf: add conf file for gro and gso Wang, Yinan
2019-07-04 6:37 ` Ma, LihongX
2019-07-10 6:05 ` Tu, Lijuan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1562190140-24335-2-git-send-email-lihongx.ma@intel.com \
--to=lihongx.ma@intel.com \
--cc=dts@dpdk.org \
--cc=yinan.wang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).