From: yufengmx <yufengx.mo@intel.com>
To: dts@dpdk.org
Cc: yufengmx <yufengx.mo@intel.com>
Subject: [dts] [PATCH V1 4/7] framework/pktgen_base: fix internal bug
Date: Tue, 6 Aug 2019 15:51:25 +0800 [thread overview]
Message-ID: <1565077888-4431-5-git-send-email-yufengx.mo@intel.com> (raw)
In-Reply-To: <1565077888-4431-1-git-send-email-yufengx.mo@intel.com>
*. remove logger format setting after import libs to eliminate dts redundant logs.
*. set part of information logger display to debug level.
*. remove un-used libs import.
*. fix pep8 issue.
Signed-off-by: yufengmx <yufengx.mo@intel.com>
---
framework/pktgen_base.py | 36 ++++++++++++++++++------------------
1 file changed, 18 insertions(+), 18 deletions(-)
diff --git a/framework/pktgen_base.py b/framework/pktgen_base.py
index eec4e6f..8915ac5 100644
--- a/framework/pktgen_base.py
+++ b/framework/pktgen_base.py
@@ -29,27 +29,22 @@
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-import os
import time
import logging
from abc import abstractmethod
from copy import deepcopy
-from logger import getLogger
from pprint import pformat
from config import PktgenConf
+from logger import getLogger, set_verbose
# packet generator name
-from settings import PKTGEN_DPDK, PKTGEN_TREX, PKTGEN_IXIA, PKTGEN
+from settings import (PKTGEN_DPDK, PKTGEN_TREX, PKTGEN_IXIA, PKTGEN,
+ load_global_setting, DEBUG_SETTING)
# macro definition
TRANSMIT_CONT = 'continuous'
TRANSMIT_M_BURST = 'multi_burst'
TRANSMIT_S_BURST = 'single_burst'
-# set logger
-FORMAT = '%(message)s'
-logging.basicConfig(format=FORMAT)
-logger = logging.getLogger(os.path.basename(__file__)[:-3].upper())
-logger.setLevel(logging.INFO)
class PacketGenerator(object):
@@ -57,8 +52,11 @@ class PacketGenerator(object):
Basic class for packet generator, define basic function for each kinds of
generators
"""
+
def __init__(self, tester):
self.logger = getLogger(PKTGEN)
+ if load_global_setting(DEBUG_SETTING) == "yes":
+ set_verbose()
self.tester = tester
self.__streams = []
self._ports_map = []
@@ -82,8 +80,8 @@ class PacketGenerator(object):
tester_pci = info['pci']
if tester_pci == gen_pci:
msg = "gen port {0} map test port {1}".format(
- port_id, port_idx)
- self.logger.info(msg)
+ port_id, port_idx)
+ self.logger.debug(msg)
return port_idx
else:
port = -1
@@ -105,15 +103,15 @@ class PacketGenerator(object):
tester_pci = info['pci']
port = self._get_gen_port(tester_pci)
msg = "test port {0} map gen port {1}".format(port_id, port)
- self.logger.info(msg)
+ self.logger.debug(msg)
except:
port = -1
return port
def add_stream(self, tx_port, rx_port, pcap_file):
- pktgen_tx_port = self._convert_tester_port(tx_port)
- pktgen_rx_port = self._convert_tester_port(rx_port)
+ pktgen_tx_port = self._convert_tester_port(tx_port)
+ pktgen_rx_port = self._convert_tester_port(rx_port)
stream_id = len(self.__streams)
stream = {'tx_port': pktgen_tx_port,
@@ -183,13 +181,14 @@ class PacketGenerator(object):
for stream_id in stream_ids:
if self.__streams[stream_id]['rx_port'] not in used_rx_port:
rxbps_rates, rxpps_rates = self._retrieve_port_statistic(
- stream_id, 'throughput')
+ stream_id, 'throughput')
used_rx_port.append(self.__streams[stream_id]['rx_port'])
bps_rx.append(rxbps_rates)
pps_rx.append(rxpps_rates)
bps_rx_total = self._summary_statistic(bps_rx)
pps_rx_total = self._summary_statistic(pps_rx)
- self.logger.info("throughput: pps_rx %f, bps_rx %f" % (pps_rx_total, bps_rx_total))
+ self.logger.info(
+ "throughput: pps_rx %f, bps_rx %f" % (pps_rx_total, bps_rx_total))
return bps_rx_total, pps_rx_total
@@ -379,7 +378,7 @@ class PacketGenerator(object):
result = self._measure_loss(stream_ids, options)
status = self._check_loss_rate(result, permit_loss_rate)
loss_rate_table.append(
- [options.get('rate') or rate_percent, result])
+ [options.get('rate') or rate_percent, result])
# if first time loss rate is ok, ignore left flow
if status:
# return data is the same with dts/etgen format
@@ -439,7 +438,7 @@ class PacketGenerator(object):
traffic_pps_min = pps
if traffic_pps_max - traffic_pps_min < step:
break
- pps = (traffic_pps_max - traffic_pps_min)/2 + traffic_pps_min
+ pps = (traffic_pps_max - traffic_pps_min) / 2 + traffic_pps_min
self.logger.info("zero loss pps is %f" % last_no_lost_mult)
# use last result as return data to keep the same with dts/etgen format
@@ -516,4 +515,5 @@ class PacketGenerator(object):
pass
-class DpdkPacketGenerator(PacketGenerator): pass # not implemented
\ No newline at end of file
+class DpdkPacketGenerator(PacketGenerator):
+ pass # not implemented
--
1.9.3
next prev parent reply other threads:[~2019-08-06 8:01 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-06 7:51 [dts] [PATCH V1 0/7] dts/pktgen: fix internal bugs yufengmx
2019-08-06 7:51 ` [dts] [PATCH V1 1/7] framework/logger: add pktgen logger and remove duplicate yufengmx
2019-08-06 7:51 ` [dts] [PATCH V1 2/7] framework/dut: fix logger quit issue yufengmx
2019-08-06 7:51 ` [dts] [PATCH V1 3/7] framework/tester: " yufengmx
2019-08-06 7:51 ` yufengmx [this message]
2019-08-06 7:51 ` [dts] [PATCH V1 5/7] framework/pktgen_ixia: fix internal bug yufengmx
2019-08-06 7:51 ` [dts] [PATCH V1 6/7] framework/pktgen_trex: " yufengmx
2019-08-06 7:51 ` [dts] [PATCH V1 7/7] framework/pktgen: fix pep8 issue yufengmx
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1565077888-4431-5-git-send-email-yufengx.mo@intel.com \
--to=yufengx.mo@intel.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).