From: changqingxwu <changqingx.wu@intel.com>
To: dts@dpdk.org
Cc: changqingxwu <changqingx.wu@intel.com>
Subject: [dts] [PATCH V1] test:add test suite about multicast
Date: Wed, 28 Aug 2019 17:20:35 +0800 [thread overview]
Message-ID: <1566984035-79983-1-git-send-email-changqingx.wu@intel.com> (raw)
Signed-off-by: changqingxwu <changqingx.wu@intel.com>
---
tests/TestSuite_multicast.py | 147 +++++++++++++++++++++++++++++++++++
1 file changed, 147 insertions(+)
create mode 100644 tests/TestSuite_multicast.py
diff --git a/tests/TestSuite_multicast.py b/tests/TestSuite_multicast.py
new file mode 100644
index 0000000..bcdb0bc
--- /dev/null
+++ b/tests/TestSuite_multicast.py
@@ -0,0 +1,147 @@
+# <COPYRIGHT_TAG>
+
+"""
+DPDK Test suite.
+
+multicast test script.
+"""
+
+import time
+from test_case import TestCase
+import utils
+
+routeTbl = [
+ ["224.0.0.101", "P1"], ["224.0.0.102", "P2"],
+ ["224.0.0.103", "P1,P2"], ["224.0.0.104", "P3"],
+ ["224.0.0.105", "P1,P3"], ["224.0.0.106", "P2,P3"],
+ ["224.0.0.107", "P1,P2,P3"], ["224.0.0.108", "P4"],
+ ["224.0.0.109", "P1,P4"], ["224.0.0.110", "P2,P4"],
+ ["224.0.0.111", "P1,P2,P4"], ["224.0.0.112", "P3,P4"],
+ ["224.0.0.113", "P1,P3,P4"], ["224.0.0.114", "P2,P3,P4"],
+ ["224.0.0.115", "P1,P2,P3,P4"]
+]
+
+trafficFlow = {
+ "F1": ["TG0", "TG0", "10.100.0.1", "224.0.0.101"],
+ "F2": ["TG0", "TG1", "10.100.0.2", "224.0.0.104"],
+ "F3": ["TG0", "TG0,TG1", "10.100.0.3", "224.0.0.105"],
+ "F4": ["TG1", "TG1", "11.100.0.1", "224.0.0.104"],
+ "F5": ["TG1", "TG0", "11.100.0.2", "224.0.0.101"],
+ "F6": ["TG1", "TG0,TG1", "11.100.0.3", "224.0.0.105"]
+}
+
+measureTarget = [
+ ["1S/1C/1T", "F1,F4", "ipv4_multicast -c %s -n 3 -- -p %s -q 2"],
+ ["1S/1C/2T", "F1,F4", "ipv4_multicast -c %s -n 3 -- -p %s -q 1"],
+ ["1S/2C/1T", "F1,F4", "ipv4_multicast -c %s -n 3 -- -p %s -q 1"],
+ ["1S/1C/1T", "F2,F5", "ipv4_multicast -c %s -n 3 -- -p %s -q 2"],
+ ["1S/1C/2T", "F2,F5", "ipv4_multicast -c %s -n 3 -- -p %s -q 1"],
+ ["1S/2C/1T", "F2,F5", "ipv4_multicast -c %s -n 3 -- -p %s -q 1"],
+ ["1S/1C/1T", "F3,F6", "ipv4_multicast -c %s -n 3 -- -p %s -q 2"],
+ ["1S/1C/2T", "F3,F6", "ipv4_multicast -c %s -n 3 -- -p %s -q 1"],
+ ["1S/2C/1T", "F3,F6", "ipv4_multicast -c %s -n 3 -- -p %s -q 1"]
+]
+
+
+class TestMulticast(TestCase):
+
+ def set_up_all(self):
+ """
+ Run at the start of each test suite.
+ Multicast Prerequisites
+ """
+ global dutPorts
+ # Based on h/w type, choose how many ports to use
+ dutPorts = self.dut.get_ports(self.nic)
+ # Verify that enough ports are available
+ self.verify(len(dutPorts) >= 4, "Insufficient ports for testing")
+
+ # Verify that enough threads are available
+ cores = self.dut.get_core_list("1S/2C/2T")
+ self.verify(cores is not None, "Insufficient cores for speed testing")
+
+ global P1, P3, TG0, TG1, TGs
+ # prepare port mapping TG0<=>P1, TG1<=>P3
+ P1 = dutPorts[0]
+ P2 = dutPorts[1]
+ P3 = dutPorts[2]
+ P4 = dutPorts[3]
+ TGs = [P1, P3]
+ TG0 = self.tester.get_local_port(TGs[0])
+ TG1 = self.tester.get_local_port(TGs[1])
+
+ # Prepare multicast route table, replace P(x) port pattern
+ repStr = "static struct mcast_group_params mcast_group_table[] = {\\\n"
+ for [ip, ports] in routeTbl:
+ mask = 0
+ for _ in ports.split(','):
+ mask = mask | (1 << eval(_))
+ entry = '{' + 'RTE_IPV4(' + ip.replace('.', ',') + '),' + str(mask) + '}'
+ repStr = repStr + ' ' * 4 + entry + ",\\\n"
+ repStr = repStr + "};"
+
+ self.dut.send_expect(r"sed -i '/mcast_group_table\[\].*{/,/^\}\;/c\\%s' examples/ipv4_multicast/main.c" % repStr, "# ")
+
+ # make application
+ out = self.dut.send_expect("make -C examples/ipv4_multicast", "#")
+ self.verify("Error" not in out, "compilation error 1")
+ self.verify("No such file" not in out, "compilation error 2")
+
+ def set_up(self):
+ """
+ Run before each test case.
+ """
+ pass
+
+ def test_multicast_forwarding(self):
+ """
+ IP4 Multicast Forwarding F1~F6
+ """
+ cores = self.dut.get_core_list("1S/2C/1T")
+ coremask = utils.create_mask(cores)
+ payload = "ABCDEFGHIJKLMNOPQRSTUVWXYZ"
+ self.dut.send_expect("examples/ipv4_multicast/build/ipv4_multicast -c %s -n 4 -- -p %s -q 2" % (
+ coremask, '0x5'), "IPv4_MULTICAST:", 60)
+
+ for flow in trafficFlow.keys():
+ for tx_port in trafficFlow[flow][0].split(","):
+ for rx_port in trafficFlow[flow][1].split(","):
+ sniff_src = "not 00:00:00:00:00:00"
+
+ inst = self.tester.tcpdump_sniff_packets(intf=self.tester.get_interface(eval(rx_port)), timeout=5,
+ count=1, filters=[{"layer": "ether", "config": {"src": sniff_src}}] )
+ dmac = self.dut.get_mac_address(TGs[int(trafficFlow[flow][0][2])])
+
+ self.tester.scapy_append('sendp([Ether(src="00:00:00:00:00:00", dst="%s")/IP(dst="%s",src="%s")\
+ /Raw(load="%s")], iface="%s")' % (
+ dmac, trafficFlow[flow][3], trafficFlow[flow][2], payload, self.tester.get_interface(eval(tx_port))))
+ self.tester.scapy_execute()
+ time.sleep(5) # Wait for the sniffer to finish.
+
+ pkts = self.tester.load_tcpdump_sniff_packets(inst)
+ for packet in pkts:
+ result = str(packet.pktgen.pkt.show)
+
+ print result
+ self.verify("Ether" in result, "No packet received")
+ self.verify("src=" + trafficFlow[flow][2] + " dst=" + trafficFlow[flow][3] in result,
+ "Wrong IP address")
+ self.verify("load='%s'" % payload in result, "Wrong payload")
+ splitIP = trafficFlow[flow][3].rsplit(".")
+ expectedMac = "01:00:5e:%s:%s:%s" % (str(int(splitIP[1], 8) & 0b01111111).zfill(2),
+ str(int(splitIP[2], 8)).zfill(2), str(int(splitIP[3], 8)).zfill(2))
+ self.verify("dst=%s" % expectedMac in result, "Wrong MAC address")
+
+ self.dut.send_expect("^C", "#")
+
+ def tear_down(self):
+ """
+ Run after each test case.
+ """
+ self.dut.send_expect("^C", "#")
+
+ def tear_down_all(self):
+ """
+ Run after each test suite.
+ """
+ self.dut.kill_all()
--
2.17.2
next reply other threads:[~2019-08-28 9:16 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-28 9:20 changqingxwu [this message]
2019-09-11 5:33 ` Zhang, Yuwei1
2019-09-18 10:48 ` Tu, Lijuan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1566984035-79983-1-git-send-email-changqingx.wu@intel.com \
--to=changqingx.wu@intel.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).