* [dts] [PATCH] tests/TestSuite_vxlan: Enable CVL25Gand100g NIC to support VXLAN case
@ 2019-08-29 5:46 zhiwei.he
2019-09-04 5:25 ` Tu, Lijuan
0 siblings, 1 reply; 2+ messages in thread
From: zhiwei.he @ 2019-08-29 5:46 UTC (permalink / raw)
To: dts; +Cc: zhiwei.he
From: "zhiwei.he" <zhiwei.he@intel.com>
Signed-off-by: zhiwei.he <zhiwei.he@intel.com>
---
tests/TestSuite_vxlan.py | 76 +++++++++++++++++++++++++++++-------------------
1 file changed, 46 insertions(+), 30 deletions(-)
diff --git a/tests/TestSuite_vxlan.py b/tests/TestSuite_vxlan.py
index ecc3f3a..3bc8071 100644
--- a/tests/TestSuite_vxlan.py
+++ b/tests/TestSuite_vxlan.py
@@ -266,6 +266,8 @@ class TestVxlan(TestCase, IxiaPacketGenerator):
self.compile_switch = 'CONFIG_RTE_LIBRTE_I40E_INC_VECTOR'
elif self.nic in ["sageville", "sagepond"]:
self.compile_switch = 'CONFIG_RTE_IXGBE_INC_VECTOR'
+ elif self.nic in ["columbiaville_25g","columbiaville_100g"]:
+ print "CVL support default none VECTOR"
else:
self.verify(False, "%s not support this vxlan" % self.nic)
# Based on h/w type, choose how many ports to use
@@ -533,13 +535,17 @@ class TestVxlan(TestCase, IxiaPacketGenerator):
"""
verify vxlan packet detection
"""
- out = self.dut.send_expect("cat config/common_base", "]# ", 10)
- src_vec_model = re.findall("%s=." % self.compile_switch, out)[0][-1]
- if src_vec_model == 'y':
- self.dut.send_expect("sed -i -e 's/%s=.*$/" % self.compile_switch
- + "%s=n/' config/common_base" % self.compile_switch, "# ", 30)
- self.dut.skip_setup = False
- self.dut.build_install_dpdk(self.target)
+ if self.nic in ["columbiaville_25g","columbiaville_100g"]:
+ print "CVL support default none VECTOR"
+ src_vec_model = 'n'
+ else:
+ out = self.dut.send_expect("cat config/common_base", "]# ", 10)
+ src_vec_model = re.findall("%s=." % self.compile_switch, out)[0][-1]
+ if src_vec_model == 'y':
+ self.dut.send_expect("sed -i -e 's/%s=.*$/" % self.compile_switch
+ + "%s=n/' config/common_base" % self.compile_switch, "# ", 30)
+ self.dut.skip_setup = False
+ self.dut.build_install_dpdk(self.target)
pmd_temp = "./%(TARGET)s/app/testpmd -c %(COREMASK)s -n " + \
@@ -571,26 +577,33 @@ class TestVxlan(TestCase, IxiaPacketGenerator):
out = self.dut.send_expect("stop", "testpmd>", 10)
self.dut.send_expect("quit", "#", 10)
-
- out = self.dut.send_expect("cat config/common_base", "]# ", 10)
- dst_vec_model = re.findall("%s=." % self.compile_switch, out)[0][-1]
- if src_vec_model != dst_vec_model:
- self.dut.send_expect("sed -i -e 's/%s=.*$/" % self.compile_switch
- + "%s=%s/' config/common_base" % (self.compile_switch, src_vec_model), "# ", 30)
- self.dut.skip_setup = False
- self.dut.build_install_dpdk(self.target)
+ if self.nic in ["columbiaville_25g","columbiaville_100g"]:
+ print "CVL support default none VECTOR"
+ src_vec_model = 'n'
+ else:
+ out = self.dut.send_expect("cat config/common_base", "]# ", 10)
+ dst_vec_model = re.findall("%s=." % self.compile_switch, out)[0][-1]
+ if src_vec_model != dst_vec_model:
+ self.dut.send_expect("sed -i -e 's/%s=.*$/" % self.compile_switch
+ + "%s=%s/' config/common_base" % (self.compile_switch, src_vec_model), "# ", 30)
+ self.dut.skip_setup = False
+ self.dut.build_install_dpdk(self.target)
def test_vxlan_ipv6_detect(self):
"""
verify vxlan packet detection with ipv6 header
"""
- out = self.dut.send_expect("cat config/common_base", "]# ", 10)
- src_vec_model = re.findall("%s=." % self.compile_switch, out)[0][-1]
- if src_vec_model == 'y':
- self.dut.send_expect("sed -i -e 's/%s=.*$/" % self.compile_switch
- + "%s=n/' config/common_base" % self.compile_switch, "# ", 30)
- self.dut.skip_setup = False
- self.dut.build_install_dpdk(self.target)
+ if self.nic in ["columbiaville_25g","columbiaville_100g"]:
+ print "CVL support default none VECTOR"
+ src_vec_model = 'n'
+ else:
+ out = self.dut.send_expect("cat config/common_base", "]# ", 10)
+ src_vec_model = re.findall("%s=." % self.compile_switch, out)[0][-1]
+ if src_vec_model == 'y':
+ self.dut.send_expect("sed -i -e 's/%s=.*$/" % self.compile_switch
+ + "%s=n/' config/common_base" % self.compile_switch, "# ", 30)
+ self.dut.skip_setup = False
+ self.dut.build_install_dpdk(self.target)
pmd_temp = "./%(TARGET)s/app/testpmd -c %(COREMASK)s -n " + \
"%(CHANNEL)d -- -i --disable-rss --rxq=4 --txq=4" + \
@@ -625,14 +638,17 @@ class TestVxlan(TestCase, IxiaPacketGenerator):
out = self.dut.send_expect("stop", "testpmd>", 10)
self.dut.send_expect("quit", "#", 10)
-
- out = self.dut.send_expect("cat config/common_base", "]# ", 10)
- dst_vec_model = re.findall("%s=." % self.compile_switch, out)[0][-1]
- if src_vec_model != dst_vec_model:
- self.dut.send_expect("sed -i -e 's/%s=.*$/" % self.compile_switch
- + "%s=%s/' config/common_base" % (self.compile_switch, src_vec_model), "# ", 30)
- self.dut.skip_setup = False
- self.dut.build_install_dpdk(self.target)
+ if self.nic in ["columbiaville_25g","columbiaville_100g"]:
+ print "CVL support default none VECTOR"
+ src_vec_model = 'n'
+ else:
+ out = self.dut.send_expect("cat config/common_base", "]# ", 10)
+ dst_vec_model = re.findall("%s=." % self.compile_switch, out)[0][-1]
+ if src_vec_model != dst_vec_model:
+ self.dut.send_expect("sed -i -e 's/%s=.*$/" % self.compile_switch
+ + "%s=%s/' config/common_base" % (self.compile_switch, src_vec_model), "# ", 30)
+ self.dut.skip_setup = False
+ self.dut.build_install_dpdk(self.target)
def test_vxlan_ipv4_checksum_offload(self):
"""
--
1.8.3.1
^ permalink raw reply [flat|nested] 2+ messages in thread* Re: [dts] [PATCH] tests/TestSuite_vxlan: Enable CVL25Gand100g NIC to support VXLAN case
2019-08-29 5:46 [dts] [PATCH] tests/TestSuite_vxlan: Enable CVL25Gand100g NIC to support VXLAN case zhiwei.he
@ 2019-09-04 5:25 ` Tu, Lijuan
0 siblings, 0 replies; 2+ messages in thread
From: Tu, Lijuan @ 2019-09-04 5:25 UTC (permalink / raw)
To: He, Zhiwei, dts; +Cc: He, Zhiwei
Applied, thanks
> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of zhiwei.he
> Sent: Thursday, August 29, 2019 1:46 PM
> To: dts@dpdk.org
> Cc: He, Zhiwei <zhiwei.he@intel.com>
> Subject: [dts] [PATCH] tests/TestSuite_vxlan: Enable CVL25Gand100g NIC to
> support VXLAN case
>
> From: "zhiwei.he" <zhiwei.he@intel.com>
>
> Signed-off-by: zhiwei.he <zhiwei.he@intel.com>
> ---
> tests/TestSuite_vxlan.py | 76 +++++++++++++++++++++++++++++-----------------
> --
> 1 file changed, 46 insertions(+), 30 deletions(-)
>
> diff --git a/tests/TestSuite_vxlan.py b/tests/TestSuite_vxlan.py index
> ecc3f3a..3bc8071 100644
> --- a/tests/TestSuite_vxlan.py
> +++ b/tests/TestSuite_vxlan.py
> @@ -266,6 +266,8 @@ class TestVxlan(TestCase, IxiaPacketGenerator):
> self.compile_switch = 'CONFIG_RTE_LIBRTE_I40E_INC_VECTOR'
> elif self.nic in ["sageville", "sagepond"]:
> self.compile_switch = 'CONFIG_RTE_IXGBE_INC_VECTOR'
> + elif self.nic in ["columbiaville_25g","columbiaville_100g"]:
> + print "CVL support default none VECTOR"
> else:
> self.verify(False, "%s not support this vxlan" % self.nic)
> # Based on h/w type, choose how many ports to use @@ -533,13
> +535,17 @@ class TestVxlan(TestCase, IxiaPacketGenerator):
> """
> verify vxlan packet detection
> """
> - out = self.dut.send_expect("cat config/common_base", "]# ", 10)
> - src_vec_model = re.findall("%s=." % self.compile_switch, out)[0][-1]
> - if src_vec_model == 'y':
> - self.dut.send_expect("sed -i -e 's/%s=.*$/" % self.compile_switch
> - + "%s=n/' config/common_base" % self.compile_switch,
> "# ", 30)
> - self.dut.skip_setup = False
> - self.dut.build_install_dpdk(self.target)
> + if self.nic in ["columbiaville_25g","columbiaville_100g"]:
> + print "CVL support default none VECTOR"
> + src_vec_model = 'n'
> + else:
> + out = self.dut.send_expect("cat config/common_base", "]# ", 10)
> + src_vec_model = re.findall("%s=." % self.compile_switch, out)[0][-1]
> + if src_vec_model == 'y':
> + self.dut.send_expect("sed -i -e 's/%s=.*$/" % self.compile_switch
> + + "%s=n/' config/common_base" % self.compile_switch,
> "# ", 30)
> + self.dut.skip_setup = False
> + self.dut.build_install_dpdk(self.target)
>
>
> pmd_temp = "./%(TARGET)s/app/testpmd -c %(COREMASK)s -n " + \
> @@ -571,26 +577,33 @@ class TestVxlan(TestCase, IxiaPacketGenerator):
>
> out = self.dut.send_expect("stop", "testpmd>", 10)
> self.dut.send_expect("quit", "#", 10)
> -
> - out = self.dut.send_expect("cat config/common_base", "]# ", 10)
> - dst_vec_model = re.findall("%s=." % self.compile_switch, out)[0][-1]
> - if src_vec_model != dst_vec_model:
> - self.dut.send_expect("sed -i -e 's/%s=.*$/" % self.compile_switch
> - + "%s=%s/' config/common_base" % (self.compile_switch,
> src_vec_model), "# ", 30)
> - self.dut.skip_setup = False
> - self.dut.build_install_dpdk(self.target)
> + if self.nic in ["columbiaville_25g","columbiaville_100g"]:
> + print "CVL support default none VECTOR"
> + src_vec_model = 'n'
> + else:
> + out = self.dut.send_expect("cat config/common_base", "]# ", 10)
> + dst_vec_model = re.findall("%s=." % self.compile_switch, out)[0][-1]
> + if src_vec_model != dst_vec_model:
> + self.dut.send_expect("sed -i -e 's/%s=.*$/" % self.compile_switch
> + + "%s=%s/' config/common_base" %
> (self.compile_switch, src_vec_model), "# ", 30)
> + self.dut.skip_setup = False
> + self.dut.build_install_dpdk(self.target)
>
> def test_vxlan_ipv6_detect(self):
> """
> verify vxlan packet detection with ipv6 header
> """
> - out = self.dut.send_expect("cat config/common_base", "]# ", 10)
> - src_vec_model = re.findall("%s=." % self.compile_switch, out)[0][-1]
> - if src_vec_model == 'y':
> - self.dut.send_expect("sed -i -e 's/%s=.*$/" % self.compile_switch
> - + "%s=n/' config/common_base" % self.compile_switch,
> "# ", 30)
> - self.dut.skip_setup = False
> - self.dut.build_install_dpdk(self.target)
> + if self.nic in ["columbiaville_25g","columbiaville_100g"]:
> + print "CVL support default none VECTOR"
> + src_vec_model = 'n'
> + else:
> + out = self.dut.send_expect("cat config/common_base", "]# ", 10)
> + src_vec_model = re.findall("%s=." % self.compile_switch, out)[0][-1]
> + if src_vec_model == 'y':
> + self.dut.send_expect("sed -i -e 's/%s=.*$/" % self.compile_switch
> + + "%s=n/' config/common_base" % self.compile_switch,
> "# ", 30)
> + self.dut.skip_setup = False
> + self.dut.build_install_dpdk(self.target)
>
> pmd_temp = "./%(TARGET)s/app/testpmd -c %(COREMASK)s -n " + \
> "%(CHANNEL)d -- -i --disable-rss --rxq=4 --txq=4" + \ @@ -625,14
> +638,17 @@ class TestVxlan(TestCase, IxiaPacketGenerator):
>
> out = self.dut.send_expect("stop", "testpmd>", 10)
> self.dut.send_expect("quit", "#", 10)
> -
> - out = self.dut.send_expect("cat config/common_base", "]# ", 10)
> - dst_vec_model = re.findall("%s=." % self.compile_switch, out)[0][-1]
> - if src_vec_model != dst_vec_model:
> - self.dut.send_expect("sed -i -e 's/%s=.*$/" % self.compile_switch
> - + "%s=%s/' config/common_base" % (self.compile_switch,
> src_vec_model), "# ", 30)
> - self.dut.skip_setup = False
> - self.dut.build_install_dpdk(self.target)
> + if self.nic in ["columbiaville_25g","columbiaville_100g"]:
> + print "CVL support default none VECTOR"
> + src_vec_model = 'n'
> + else:
> + out = self.dut.send_expect("cat config/common_base", "]# ", 10)
> + dst_vec_model = re.findall("%s=." % self.compile_switch, out)[0][-1]
> + if src_vec_model != dst_vec_model:
> + self.dut.send_expect("sed -i -e 's/%s=.*$/" % self.compile_switch
> + + "%s=%s/' config/common_base" %
> (self.compile_switch, src_vec_model), "# ", 30)
> + self.dut.skip_setup = False
> + self.dut.build_install_dpdk(self.target)
>
> def test_vxlan_ipv4_checksum_offload(self):
> """
> --
> 1.8.3.1
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-09-04 5:25 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-08-29 5:46 [dts] [PATCH] tests/TestSuite_vxlan: Enable CVL25Gand100g NIC to support VXLAN case zhiwei.he
2019-09-04 5:25 ` Tu, Lijuan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).