From: "zhang,yan" <yanx.a.zhang@intel.com>
To: dts@dpdk.org
Cc: lei.a.yao@intel.com, "zhang,yan" <yanx.a.zhang@intel.com>
Subject: [dts] [PATCH V1] test_plans:add mdd_test_plan.rst
Date: Mon, 16 Sep 2019 17:18:02 +0800 [thread overview]
Message-ID: <1568625482-3862-1-git-send-email-yanx.a.zhang@intel.com> (raw)
Add a new test_plan mdd.
Signed-off-by: zhang,yan <yanx.a.zhang@intel.com>
---
test_plans/mdd_test_plan.rst | 314 +++++++++++++++++++++++++++++++++++
1 file changed, 314 insertions(+)
create mode 100644 test_plans/mdd_test_plan.rst
diff --git a/test_plans/mdd_test_plan.rst b/test_plans/mdd_test_plan.rst
new file mode 100644
index 0000000..8e6acde
--- /dev/null
+++ b/test_plans/mdd_test_plan.rst
@@ -0,0 +1,314 @@
+.. Copyright (c) <2019>, Intel Corporation
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in
+ the documentation and/or other materials provided with the
+ distribution.
+
+ - Neither the name of Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived
+ from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ OF THE POSSIBILITY OF SUCH DAMAGE.
+
+Prerequisites
+=============
+Malicious Driver Detection (MDD) support sagevill and i350 nic, dpdk2.3+ only
+support sagevill NIC. ixgbe supports disable MDD from version 4.2.3
+so this test must run dpdk2.3+
+and used ixgbe 4.2.3+ in host.
+
+Notice: use command ``insmod ixgbe.ko MDD=0,0`` to disable MDD. Each "0" in the
+command refers to a port. For example, if there are 6 ixgbe ports, the command
+should be changed to ``insmod ixgbe.ko MDD=0,0,0,0,0,0``
+
+Test Case 1: enable_mdd_dpdk_disable
+====================================
+1. enable the MDD::
+
+ rmmod ixgbe
+ modprobe ixgbe MDD=1,1
+ ifconfig ens865f1 up
+ ifconfig ens865f0 up
+
+2. pf_port0 virtualizes a vf0 and pf_port1 virtualizes a vf1::
+
+ echo 1 > /sys/bus/pci/devices/0000\:03\:00.0/sriov_numvfs
+ echo 1 > /sys/bus/pci/devices/0000\:03\:00.1/sriov_numvfs
+
+3. passthrough vf0 and vf1 to vm0 and start vm0::
+
+ taskset -c 4,5,6,7 qemu-system-x86_64 -name vm0 -enable-kvm -pidfile /tmp/.vm0.pid \
+ -daemonize -monitor unix:/tmp/vm0_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6001-:22 -device vfio-pci,host=0000:03:10.0,id=pt_0 \
+ -device vfio-pci,host=0000:03:10.1,id=pt_1 -cpu host -smp 4 -m 10240 \
+ -chardev socket,path=/tmp/vm0_qga0.sock,server,nowait,id=vm0_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm0_qga0,name=org.qemu.guest_agent.0 -vnc :1 \
+ -drive file=/home/image/ubuntu16-0.img,format=qcow2,if=virtio,index=0,media=disk
+
+4. login vm0, got VFs pci device id in vm0, assume they are 00:06.0 & 00:07.0, bind them to igb_uio driver::
+
+ modprobe uio
+ insmod igb_uio.ko
+ ./tools/dpdk_nic_bind.py --bind=igb_uio 00:06.0 00:07.0
+
+5. Turn on testpmd and set mac forwarding mode::
+
+ ./testpmd -c 0x0f -n 4 -- -i --portmask=0x3 --tx-offloads=0x1
+
+ testpmd> set fwd mac
+ testpmd> start
+
+6. get mac address of VF0 and use it as dest mac, using scapy to send 2000 packets from tester::
+
+ sendp(Ether(src='tester_mac', dst='vm_port0_mac')/IP()/UDP()/Raw(load='XXXXXXXXXXXXXXXXXX'), iface="tester_nic")
+
+7. verify the packets can't be received by VF1,As follows::
+
+ ######################## NIC statistics for port 0 ########################
+ RX-packets: 2000 RX-missed: 0 RX-bytes: 120000
+ RX-errors: 0
+ RX-nombuf: 0
+ TX-packets: 0 TX-errors: 0 TX-bytes: 0
+
+ Throughput (since last show)
+ Rx-pps: 634
+ Tx-pps: 0
+ ############################################################################
+ ######################## NIC statistics for port 1 ########################
+ RX-packets: 0 RX-missed: 0 RX-bytes: 0
+ RX-errors: 0
+ RX-nombuf: 0
+ TX-packets: 0 TX-errors: 0 TX-bytes: 0
+
+ Throughput (since last show)
+ Rx-pps: 0
+ Tx-pps: 0
+ ############################################################################
+
+8. You can see "ixgbe 0000:03:00.0: Malicious event on VF 0 tx:100000 rx:0" by using the "dmesg -c" command on the host::
+
+ dmesg -c | grep 'event'
+
+Test Case 2: enable_mdd_dpdk_enable
+===================================
+1. enable the MDD::
+
+ rmmod ixgbe
+ modprobe ixgbe MDD=1,1
+ ifconfig ens865f1 up
+ ifconfig ens865f0 up
+
+2. pf_port0 virtualizes a vf0 and pf_port1 virtualizes a vf1::
+
+ echo 1 > /sys/bus/pci/devices/0000\:03\:00.0/sriov_numvfs
+ echo 1 > /sys/bus/pci/devices/0000\:03\:00.1/sriov_numvfs
+
+3. passthrough vf0 and vf1 to vm0 and start vm0::
+
+ taskset -c 4,5,6,7 qemu-system-x86_64 -name vm0 -enable-kvm -pidfile /tmp/.vm0.pid \
+ -daemonize -monitor unix:/tmp/vm0_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6001-:22 -device vfio-pci,host=0000:03:10.0,id=pt_0 \
+ -device vfio-pci,host=0000:03:10.1,id=pt_1 -cpu host -smp 4 -m 10240 \
+ -chardev socket,path=/tmp/vm0_qga0.sock,server,nowait,id=vm0_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm0_qga0,name=org.qemu.guest_agent.0 -vnc :1 \
+ -drive file=/home/image/ubuntu16-0.img,format=qcow2,if=virtio,index=0,media=disk
+
+4. login vm0, got VFs pci device id in vm0, assume they are 00:06.0 & 00:07.0, bind them to igb_uio driver::
+
+ modprobe uio
+ insmod igb_uio.ko
+ ./tools/dpdk_nic_bind.py --bind=igb_uio 00:06.0 00:07.0
+
+5. Turn on testpmd and set mac forwarding mode::
+
+ ./testpmd -c 0x0f -n 4 -- -i --portmask=0x3 --tx-offloads=0x0
+
+ testpmd> set fwd mac
+ testpmd> start
+
+6. get mac address of VF0 and use it as dest mac, using scapy to send 2000 packets from tester::
+
+ sendp(Ether(src='tester_mac', dst='vm_port0_mac')/IP()/UDP()/Raw(load='XXXXXXXXXXXXXXXXXX'), iface="tester_nic")
+
+7. verify the packets can't be received by VF1,As follows::
+
+ ######################## NIC statistics for port 0 ########################
+ RX-packets: 2000 RX-missed: 0 RX-bytes: 120000
+ RX-errors: 0
+ RX-nombuf: 0
+ TX-packets: 0 TX-errors: 0 TX-bytes: 0
+
+ Throughput (since last show)
+ Rx-pps: 634
+ Tx-pps: 0
+ ############################################################################
+ ######################## NIC statistics for port 1 ########################
+ RX-packets: 0 RX-missed: 0 RX-bytes: 0
+ RX-errors: 0
+ RX-nombuf: 0
+ TX-packets: 0 TX-errors: 0 TX-bytes: 0
+
+ Throughput (since last show)
+ Rx-pps: 0
+ Tx-pps: 0
+ ############################################################################
+
+8. You can see "ixgbe 0000:03:00.0: Malicious event on VF 0 tx:100000 rx:0" by using the "dmesg -c" command on the host::
+
+ dmesg -c | grep 'event'
+
+Test Case 3: disable_mdd_dpdk_disable
+=====================================
+1. disable the MDD::
+
+ rmmod ixgbe
+ modprobe ixgbe MDD=0,0
+ ifconfig ens865f1 up
+ ifconfig ens865f0 up
+
+2. pf_port0 virtualizes a vf0 and pf_port1 virtualizes a vf1::
+
+ echo 1 > /sys/bus/pci/devices/0000\:03\:00.0/sriov_numvfs
+ echo 1 > /sys/bus/pci/devices/0000\:03\:00.1/sriov_numvfs
+
+3. passthrough vf0 and vf1 to vm0 and start vm0::
+
+ taskset -c 4,5,6,7 qemu-system-x86_64 -name vm0 -enable-kvm -pidfile /tmp/.vm0.pid \
+ -daemonize -monitor unix:/tmp/vm0_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6001-:22 -device vfio-pci,host=0000:03:10.0,id=pt_0 \
+ -device vfio-pci,host=0000:03:10.1,id=pt_1 -cpu host -smp 4 -m 10240 \
+ -chardev socket,path=/tmp/vm0_qga0.sock,server,nowait,id=vm0_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm0_qga0,name=org.qemu.guest_agent.0 -vnc :1 \
+ -drive file=/home/image/ubuntu16-0.img,format=qcow2,if=virtio,index=0,media=disk
+
+4. login vm0, got VFs pci device id in vm0, assume they are 00:06.0 & 00:07.0, bind them to igb_uio driver::
+
+ modprobe uio
+ insmod igb_uio.ko
+ ./tools/dpdk_nic_bind.py --bind=igb_uio 00:06.0 00:07.0
+
+5. Turn on testpmd and set mac forwarding mode::
+
+ ./testpmd -c 0xf -n 4 -- -i --portmask=0x3 --tx-offloads=0x1
+
+ testpmd> set fwd mac
+ testpmd> start
+
+6. get mac address of VF0 and use it as dest mac, using scapy to send 2000 packets from tester::
+
+ sendp(Ether(src='tester_mac', dst='vm_port0_mac')/IP()/UDP()/Raw(load='XXXXXXXXXXXXXXXXXX'), iface="tester_nic")
+
+7. verify the packets can be received by VF1,As follows::
+
+ ######################## NIC statistics for port 0 ########################
+ RX-packets: 2000 RX-missed: 0 RX-bytes: 120000
+ RX-errors: 0
+ RX-nombuf: 0
+ TX-packets: 0 TX-errors: 0 TX-bytes: 0
+
+ Throughput (since last show)
+ Rx-pps: 634
+ Tx-pps: 0
+ ############################################################################
+ ######################## NIC statistics for port 1 ########################
+ RX-packets: 0 RX-missed: 0 RX-bytes: 0
+ RX-errors: 0
+ RX-nombuf: 0
+ TX-packets: 2000 TX-errors: 0 TX-bytes: 120000
+
+ Throughput (since last show)
+ Rx-pps: 0
+ Tx-pps: 618
+ ############################################################################
+
+8. You cannot see "ixgbe 0000:03:00.0: Malicious event on VF 0 tx:100000 rx:0" by using the "dmesg -c" command on the host::
+
+ dmesg -c | grep 'event'
+
+Test Case 4: disable_mdd_dpdk_enable
+====================================
+1. disable the MDD::
+
+ rmmod ixgbe
+ modprobe ixgbe MDD=0,0
+ ifconfig ens865f1 up
+ ifconfig ens865f0 up
+
+2. pf_port0 virtualizes a vf0 and pf_port1 virtualizes a vf1::
+
+ echo 1 > /sys/bus/pci/devices/0000\:03\:00.0/sriov_numvfs
+ echo 1 > /sys/bus/pci/devices/0000\:03\:00.1/sriov_numvfs
+
+3. passthrough vf0 and vf1 to vm0 and start vm0::
+
+ taskset -c 4,5,6,7 qemu-system-x86_64 -name vm0 -enable-kvm -pidfile /tmp/.vm0.pid \
+ -daemonize -monitor unix:/tmp/vm0_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6001-:22 -device vfio-pci,host=0000:03:10.0,id=pt_0 \
+ -device vfio-pci,host=0000:03:10.1,id=pt_1 -cpu host -smp 4 -m 10240 \
+ -chardev socket,path=/tmp/vm0_qga0.sock,server,nowait,id=vm0_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm0_qga0,name=org.qemu.guest_agent.0 -vnc :1 \
+ -drive file=/home/image/ubuntu16-0.img,format=qcow2,if=virtio,index=0,media=disk
+
+4. login vm0, got VFs pci device id in vm0, assume they are 00:06.0 & 00:07.0, bind them to igb_uio driver::
+
+ modprobe uio
+ insmod igb_uio.ko
+ ./tools/dpdk_nic_bind.py --bind=igb_uio 00:06.0 00:07.0
+
+5. Turn on testpmd and set mac forwarding mode::
+
+ ./testpmd -c 0xf -n 4 -- -i --portmask=0x3 --tx-offloads=0x0
+
+ testpmd> set fwd mac
+ testpmd> start
+
+6. get mac address of VF0 and use it as dest mac, using scapy to send 2000 packets from tester::
+
+ sendp(Ether(src='tester_mac', dst='vm_port0_mac')/IP()/UDP()/Raw(load='XXXXXXXXXXXXXXXXXX'), iface="tester_nic")
+
+7. verify the packets can be received by VF1,As follows::
+
+ ######################## NIC statistics for port 0 ########################
+ RX-packets: 2000 RX-missed: 0 RX-bytes: 120000
+ RX-errors: 0
+ RX-nombuf: 0
+ TX-packets: 0 TX-errors: 0 TX-bytes: 0
+
+ Throughput (since last show)
+ Rx-pps: 634
+ Tx-pps: 0
+ ############################################################################
+ ######################## NIC statistics for port 1 ########################
+ RX-packets: 0 RX-missed: 0 RX-bytes: 0
+ RX-errors: 0
+ RX-nombuf: 0
+ TX-packets: 2000 TX-errors: 0 TX-bytes: 120000
+
+ Throughput (since last show)
+ Rx-pps: 0
+ Tx-pps: 618
+ ############################################################################
+
+8. You cannot see "ixgbe 0000:03:00.0: Malicious event on VF 0 tx:100000 rx:0" by using the "dmesg -c" command on the host::
+
+ dmesg -c | grep 'event'
--
2.17.2
next reply other threads:[~2019-09-16 9:13 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-16 9:18 zhang,yan [this message]
2019-09-17 1:18 ` Yao, Lei A
2019-09-20 6:31 ` Tu, Lijuan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1568625482-3862-1-git-send-email-yanx.a.zhang@intel.com \
--to=yanx.a.zhang@intel.com \
--cc=dts@dpdk.org \
--cc=lei.a.yao@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).