From: Peng Yuan <yuan.peng@intel.com>
To: dts@dpdk.org
Cc: Peng Yuan <yuan.peng@intel.com>
Subject: [dts] [PATCH v1]tests: add some check parameters to TestSuite_ipgre.py
Date: Mon, 23 Sep 2019 17:29:05 +0800 [thread overview]
Message-ID: <1569230945-82019-1-git-send-email-yuan.peng@intel.com> (raw)
Add some check parameters to TestSuite_ipgre.py
Signed-off-by: Peng Yuan <yuan.peng@intel.com>
diff --git a/tests/TestSuite_ipgre.py b/tests/TestSuite_ipgre.py
index d74ac05..d08a933 100644
--- a/tests/TestSuite_ipgre.py
+++ b/tests/TestSuite_ipgre.py
@@ -63,7 +63,9 @@ class TestIpgre(TestCase):
"""
self.printFlag = self._enable_debug
ports = self.dut.get_ports()
- self.verify(self.nic in ["columbiaville_25g", "columbiaville_100g", "fortville_eagle", "fortville_spirit", "fortville_spirit_single", "fortville_25g", "carlsville"],
+ self.verify(self.nic in ["fortville_eagle", "fortville_spirit",
+ "fortville_spirit_single", "fortville_25g", "carlsville",
+ "columbiaville_25g", "columbiaville_100g"],
"GRE tunnel packet type only support by fortville and carlsville")
self.verify(len(ports) >= 1, "Insufficient ports for testing")
valports = [_ for _ in ports if self.tester.get_local_port(_) != -1]
@@ -90,7 +92,7 @@ class TestIpgre(TestCase):
"""
pass
- def check_packet_transmission(self, pkt_types, layer_configs=None):
+ def check_packet_transmission(self, pkt_types, layer_configs=None, queue=None, add_filter=0):
time.sleep(1)
for pkt_type in pkt_types.keys():
pkt_names = pkt_types[pkt_type]
@@ -115,6 +117,14 @@ class TestIpgre(TestCase):
else:
print utils.GREEN("Detected %s successfully" % pkt_type)
time.sleep(1)
+ if queue == None: # no filter
+ pass
+ else:
+ if add_filter: # remove filter
+ self.verify(("Receive queue=0x%s" % queue) in out, "Failed to enter the right queue.")
+ else:
+ self.verify(("Receive queue=0x%s" % queue) not in out, "Failed to enter the right queue.")
+
def save_ref_packet(self, pkt_types, layer_configs=None):
for pkt_type in pkt_types.keys():
@@ -186,7 +196,7 @@ class TestIpgre(TestCase):
config_layers = {'ether': {'src': self.outer_mac_src},
'ipv4': {'proto': 'gre'}}
# Start testpmd and enable rxonly forwarding mode
- testpmd_cmd = "./%s/app/testpmd -c ffff -n 4 -- -i --enable-rx-cksum --enable-rx-cksum" % self.target
+ testpmd_cmd = "./%s/app/testpmd -c ffff -n 4 -- -i --enable-rx-cksum" % self.target
self.dut.send_expect( testpmd_cmd,
"testpmd>",
20)
@@ -278,12 +288,16 @@ class TestIpgre(TestCase):
# Send packet inner ip address matched and check packet received by queue 3
pkt_types = {"MAC_IP_GRE_IPv4-TUNNEL_UDP_PKT": ["TUNNEL_GRENAT", "INNER_L4_UDP"]}
config_layers = {'ether': {'src': self.outer_mac_src},
- 'ipv4': {'dst': "0.0.0.0", 'proto': 'gre'}}
- self.check_packet_transmission(pkt_types, config_layers)
+ 'ipv4': {'proto': 'gre',
+ 'src': self.outer_ip_src,
+ 'dst': self.outer_ip_dst},
+ 'inner_ipv4':{'dst': "0.0.0.0"}}
+ self.check_packet_transmission(pkt_types, config_layers, "3", 1)
# Remove tunnel filter and check same packet received by queue 0
cmd = "tunnel_filter rm 0 %s %s 0.0.0.0 1 ipingre iip 0 3"%(outer_mac, inner_mac)
self.dut.send_expect( cmd, "testpmd>")
+ self.check_packet_transmission(pkt_types, config_layers, "3")
# Add GRE filter that forward outer ip address 0.0.0.0 to queue 3
cmd = "tunnel_filter add 0 %s %s 0.0.0.0 1 ipingre oip 0 3"%(outer_mac, inner_mac)
@@ -293,11 +307,13 @@ class TestIpgre(TestCase):
pkt_types = {"MAC_IP_GRE_IPv4-TUNNEL_UDP_PKT": ["TUNNEL_GRENAT", "INNER_L4_UDP"]}
config_layers = {'ether': {'src': self.outer_mac_src},
'ipv4': {'dst': "0.0.0.0", 'proto': 'gre'}}
- self.check_packet_transmission(pkt_types, config_layers)
+ self.check_packet_transmission(pkt_types, config_layers, "3", 1)
# Add GRE filter that forward outer ip address 0.0.0.0 to queue 3
- cmd = "tunnel_filter rm 0 %s %s 0.0.0.0 1 ipingre iip 0 3"%(outer_mac, inner_mac)
+ cmd = "tunnel_filter rm 0 %s %s 0.0.0.0 1 ipingre oip 0 3"%(outer_mac, inner_mac)
self.dut.send_expect( cmd, "testpmd>")
+ self.check_packet_transmission(pkt_types, config_layers, "3")
+
time.sleep(2)
self.dut.send_expect("quit", "#")
@@ -437,14 +453,12 @@ class TestIpgre(TestCase):
def tear_down(self):
"""
Run after each test case.
- Nothing to do.
"""
- pass
+ self.dut.kill_all()
def tear_down_all(self):
"""
Run after each test suite.
Nothing to do.
"""
- self.dut.kill_all()
pass
--
2.7.4
next reply other threads:[~2019-09-23 9:24 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-23 9:29 Peng Yuan [this message]
2019-09-24 9:21 ` Tu, Lijuan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1569230945-82019-1-git-send-email-yuan.peng@intel.com \
--to=yuan.peng@intel.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).