test suite reviews and discussions
 help / color / mirror / Atom feed
From: lihong <lihongx.ma@intel.com>
To: dts@dpdk.org
Cc: lihong <lihongx.ma@intel.com>
Subject: [dts] [PATCH V2] tests/vf_port_start_stop: use scapy instead of pktgen send pkts
Date: Tue, 24 Sep 2019 07:32:57 +0800	[thread overview]
Message-ID: <1569281577-24766-1-git-send-email-lihongx.ma@intel.com> (raw)

Signed-off-by: lihong <lihongx.ma@intel.com>
---
 tests/TestSuite_vf_port_start_stop.py | 99 +++++++++--------------------------
 1 file changed, 25 insertions(+), 74 deletions(-)

diff --git a/tests/TestSuite_vf_port_start_stop.py b/tests/TestSuite_vf_port_start_stop.py
index 2ff2d1c..7be5116 100644
--- a/tests/TestSuite_vf_port_start_stop.py
+++ b/tests/TestSuite_vf_port_start_stop.py
@@ -9,7 +9,6 @@ from pmd_output import PmdOutput
 from utils import RED, GREEN
 from net_device import NetDevice
 from crb import Crb
-from scapy.all import *
 VM_CORES_MASK = 'all'
 
 class TestVfPortStartStop(TestCase):
@@ -22,6 +21,8 @@ class TestVfPortStartStop(TestCase):
         self.verify(len(self.dut_ports) >= 1, "Insufficient ports")
         self.vm0 = None
         self.filename = "/tmp/vf.pcap"
+        self.tester_tx_port = self.tester.get_local_port(self.dut_ports[0])
+        self.tester_tintf = self.tester.get_interface(self.tester_tx_port)
 
         # set vf assign method and vf driver
         self.vf_driver = self.get_suite_cfg()['vf_driver']
@@ -37,86 +38,39 @@ class TestVfPortStartStop(TestCase):
     def set_up(self):
 
         self.setup_1pf_2vf_1vm_env_flag = 0
-
-    def pktgen_prerequisites(self):
-        """
-        igb_uio.ko should be put in ~ before you using pktgen
-        """
-        out = self.tester.send_expect("ls", "#")
-        self.verify("igb_uio.ko" in out, "No file igb_uio.ko, please add it in ~")
-        self.tester.send_expect("modprobe uio", "#", 70)
-        out = self.tester.send_expect("lsmod | grep igb_uio", "#")
-        if "igb_uio" in out:
-            self.tester.send_expect("rmmod -f igb_uio", "#", 70)
-        self.tester.send_expect("insmod ~/igb_uio.ko", "#", 60)
-        out = self.tester.send_expect("lsmod | grep igb_uio", "#")
-        assert ("igb_uio" in out), "Failed to insmod igb_uio"
-
-        total_huge_pages = self.tester.get_total_huge_pages()
-        if total_huge_pages == 0:
-            self.tester.mount_huge_pages()
-            self.tester.set_huge_pages(2048)
-
-    def pktgen_kill(self):
-        """
-        Kill all pktgen on tester.
-        """
-        pids = []
-        pid_reg = r'p(\d+)'
-        out = self.tester.alt_session.send_expect("lsof -Fp /var/run/.pg_config", "#", 20)
-        if len(out):
-            lines = out.split('\r\n')
-            for line in lines:
-                m = re.match(pid_reg, line)
-                if m:
-                    pids.append(m.group(1))
-        for pid in pids:
-            self.tester.alt_session.send_expect('kill -9 %s' % pid, '# ', 20)
+        self.send_pks_session = None
 
     def send_and_verify(self, dst_mac, testpmd):
         """
-        Generates packets by pktgen
+        Generates packets and verify
         """
         self.testpmd_reset_status(testpmd)
 
-        self.pktgen_prerequisites()
-        # bind ports
-        self.tester_tx_port = self.tester.get_local_port(self.dut_ports[0])
-        self.tester_tx_pci = self.tester.ports_info[self.tester_tx_port]['pci']
-        port = self.tester.ports_info[self.tester_tx_port]['port']
-        self.tester_port_driver = port.get_nic_driver()
-        self.tester.send_expect("./dpdk-devbind.py --force --bind=igb_uio %s" % self.tester_tx_pci, "#")
-
-        src_mac = self.tester.get_mac(self.tester_tx_port) 
+        src_mac = self.tester.get_mac(self.tester_tx_port)
         if src_mac == 'N/A':
             src_mac = "02:00:00:00:01"
-
-        self.create_pcap_file(self.filename, dst_mac, src_mac)
-
-        self.tester.send_expect("./pktgen -c 0x1f -n 2  --proc-type auto --socket-mem 128,128 --file-prefix pg -- -P -T -m '1.0' -s 0:%s" % self.filename, "Pktgen >", 100)
-        time.sleep(1)
-        self.tester.send_expect("start all", "Pktgen>")
+        self.send_pkts(self.filename, dst_mac, src_mac)
         time.sleep(1)
         self.check_port_start_stop(testpmd)
-        # quit pktgen
-        self.tester.send_expect("stop all", "Pktgen>")
-        self.tester.send_expect("quit", "# ")
+        self.tester.send_expect('killall -s INT scapy', '# ')
+        self.tester.destroy_session(self.send_pks_session)
+        self.send_pks_session = None
 
-    def create_pcap_file(self, filename, dst_mac, src_mac):
+    def send_pkts(self, filename, dst_mac, src_mac):
         """
         Generates a valid PCAP file with the given configuration.
         """
-        def_pkts = {'IP/UDP': Ether(dst="%s" % dst_mac, src="%s" % src_mac)/IP(src="127.0.0.2")/UDP()/("X"*46),
-                    'IP/TCP': Ether(dst="%s" % dst_mac, src="%s" % src_mac)/IP(src="127.0.0.2")/TCP()/("X"*46),
-                    'IP/SCTP': Ether(dst="%s" % dst_mac, src="%s" % src_mac)/IP(src="127.0.0.2")/SCTP()/("X"*48),
-                    'IPv6/UDP': Ether(dst="%s" % dst_mac, src="%s" % src_mac)/IPv6(src="::2")/UDP()/("X"*46),
-                    'IPv6/TCP': Ether(dst="%s" % dst_mac, src="%s" % src_mac)/IPv6(src="::2")/TCP()/("X"*46),}
-
-        pkts = []
-        for key in def_pkts.keys():
-            pkts.append(def_pkts[key])
-
-        wrpcap(filename, pkts)
+        sendp_fmt = "sendp(pk, iface='%s', loop=1)" % (self.tester_tintf)
+        self.send_pks_session = self.tester.create_session("scapy1")
+        self.send_pks_session.send_expect("scapy", ">>>")
+        self.send_pks_session.send_expect("from scapy.layers.sctp import SCTP, SCTPChunkData", ">>>")
+        self.send_pks_session.send_expect('pk1=[Ether(dst="%s", src="%s")/IP(src="127.0.0.2")/UDP()/("X"*46)]'%(dst_mac, src_mac), '>>>')
+        self.send_pks_session.send_expect('pk2=[Ether(dst="%s", src="%s")/IP(src="127.0.0.2")/TCP()/("X"*46)]'%(dst_mac, src_mac), '>>>')
+        self.send_pks_session.send_expect('pk3=[Ether(dst="%s", src="%s")/IP(src="127.0.0.2")/SCTP()/("X"*48)]'%(dst_mac, src_mac), '>>>')
+        self.send_pks_session.send_expect('pk4=[Ether(dst="%s", src="%s")/IPv6(src="::2")/UDP()/("X"*46)]'%(dst_mac, src_mac), '>>>')
+        self.send_pks_session.send_expect('pk5=[Ether(dst="%s", src="%s")/IPv6(src="::2")/TCP()/("X"*46)]'%(dst_mac, src_mac), '>>>')
+        self.send_pks_session.send_expect('pk = pk1+pk2+pk3+pk4+pk5', '>>>')
+        self.send_pks_session.send_command(sendp_fmt)
 
     def testpmd_reset_status(self, testpmd):
         """
@@ -242,13 +196,10 @@ class TestVfPortStartStop(TestCase):
 
     def tear_down_all(self):
 
-        self.pktgen_kill()
-        if getattr(self, 'tester_port_driver', None) and \
-           getattr(self, 'tester_tx_pci', None):
-            self.tester.send_expect("./dpdk-devbind.py --bind=%s %s" \
-                %(self.tester_port_driver, self.tester_tx_pci), "#")
-            tx_interface = self.tester.get_interface(self.tester_tx_port)
-            self.tester.send_expect("ifconfig %s up" % tx_interface, "#")
+        if self.send_pks_session:
+            self.tester.send_expect('killall -s INT scapy', '# ')
+            self.tester.destroy_session(self.send_pks_session)
+            self.send_pks_session = None
 
         if getattr(self, 'vm0', None):
             self.vm0.stop()
-- 
2.7.4


             reply	other threads:[~2019-09-24  6:57 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-23 23:32 lihong [this message]
2019-09-24  6:59 ` Zhang, YanX A

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1569281577-24766-1-git-send-email-lihongx.ma@intel.com \
    --to=lihongx.ma@intel.com \
    --cc=dts@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).