From: lihong <lihongx.ma@intel.com>
To: dts@dpdk.org
Cc: lihong <lihongx.ma@intel.com>
Subject: [dts] [PATCH V1] tests/vf_port_start_stop: use Packet to send pkt
Date: Tue, 15 Oct 2019 09:24:44 +0800 [thread overview]
Message-ID: <1571102684-10923-1-git-send-email-lihongx.ma@intel.com> (raw)
Signed-off-by: lihong <lihongx.ma@intel.com>
---
tests/TestSuite_vf_port_start_stop.py | 44 +++++++++++------------------------
1 file changed, 14 insertions(+), 30 deletions(-)
diff --git a/tests/TestSuite_vf_port_start_stop.py b/tests/TestSuite_vf_port_start_stop.py
index dcd799b..945c671 100644
--- a/tests/TestSuite_vf_port_start_stop.py
+++ b/tests/TestSuite_vf_port_start_stop.py
@@ -6,11 +6,7 @@ import time
from virt_common import VM
from test_case import TestCase
from pmd_output import PmdOutput
-from utils import RED, GREEN
-from net_device import NetDevice
-from crb import Crb
-from scapy.all import *
-from scapy.layers.sctp import SCTP, SCTPChunkData
+from packet import Packet
VM_CORES_MASK = 'all'
class TestVfPortStartStop(TestCase):
@@ -22,10 +18,8 @@ class TestVfPortStartStop(TestCase):
self.dut_ports = self.dut.get_ports(self.nic)
self.verify(len(self.dut_ports) >= 1, "Insufficient ports")
self.vm0 = None
- self.filename = "/tmp/vf.pcap"
self.tester_tx_port = self.tester.get_local_port(self.dut_ports[0])
self.tester_tintf = self.tester.get_interface(self.tester_tx_port)
- self.send_pks_session = None
# set vf assign method and vf driver
self.vf_driver = self.get_suite_cfg()['vf_driver']
if self.vf_driver is None:
@@ -40,6 +34,8 @@ class TestVfPortStartStop(TestCase):
def set_up(self):
self.setup_1pf_2vf_1vm_env_flag = 0
+ self.send_pks_session = None
+ self.pkts = Packet()
def send_and_verify(self, dst_mac, testpmd):
"""
@@ -50,33 +46,23 @@ class TestVfPortStartStop(TestCase):
src_mac = self.tester.get_mac(self.tester_tx_port)
if src_mac == 'N/A':
src_mac = "02:00:00:00:01"
- self.send_pkts(self.filename, dst_mac, src_mac)
+ self.send_pkts(dst_mac, src_mac)
time.sleep(1)
self.check_port_start_stop(testpmd)
- self.tester.send_expect('killall -s INT scapy', '# ')
- self.tester.destroy_session(self.send_pks_session)
- self.send_pks_session = None
- def send_pkts(self, filename, dst_mac, src_mac):
+ def send_pkts(self, dst_mac, src_mac):
"""
Generates a valid PCAP file with the given configuration.
"""
- def_pkts = {'IP/UDP': Ether(dst="%s" % dst_mac, src="%s" % src_mac)/IP(src="127.0.0.2")/UDP()/("X"*46),
- 'IP/TCP': Ether(dst="%s" % dst_mac, src="%s" % src_mac)/IP(src="127.0.0.2")/TCP()/("X"*46),
- 'IP/SCTP': Ether(dst="%s" % dst_mac, src="%s" % src_mac)/IP(src="127.0.0.2")/SCTP()/("X"*48),
- 'IPv6/UDP': Ether(dst="%s" % dst_mac, src="%s" % src_mac)/IPv6(src="::2")/UDP()/("X"*46),
- 'IPv6/TCP': Ether(dst="%s" % dst_mac, src="%s" % src_mac)/IPv6(src="::2")/TCP()/("X"*46),}
+ def_pkts = {'IP/UDP': 'Ether(dst="%s", src="%s")/IP(src="127.0.0.2")/UDP()/("X"*46)' % (dst_mac, src_mac),
+ 'IP/TCP': 'Ether(dst="%s", src="%s")/IP(src="127.0.0.2")/TCP()/("X"*46)' % (dst_mac, src_mac),
+ 'IP/SCTP': 'Ether(dst="%s", src="%s")/IP(src="127.0.0.2")/SCTP()/("X"*48)' % (dst_mac, src_mac),
+ 'IPv6/UDP': 'Ether(dst="%s", src="%s")/IPv6(src="::2")/UDP()/("X"*46)' % (dst_mac, src_mac),
+ 'IPv6/TCP': 'Ether(dst="%s", src="%s")/IPv6(src="::2")/TCP()/("X"*46)' % (dst_mac, src_mac),}
- pkts = []
for key in def_pkts.keys():
- pkts.append(def_pkts[key])
- wrpcap(filename, pkts)
-
- sendp_fmt = "sendp(pk, iface='%s', loop=1)" % (self.tester_tintf)
- self.send_pks_session = self.tester.create_session("scapy1")
- self.send_pks_session.send_expect("scapy", ">>>")
- self.send_pks_session.send_expect("pk=rdpcap('%s')" % filename, ">>>")
- self.send_pks_session.send_command(sendp_fmt)
+ self.pkts.append_pkt(def_pkts[key])
+ self.send_pks_session = self.pkts.send_pkt_bg(self.tester, self.tester_tintf)
def testpmd_reset_status(self, testpmd):
"""
@@ -195,15 +181,13 @@ class TestVfPortStartStop(TestCase):
def tear_down(self):
+ if self.send_pks_session:
+ self.pkts.stop_send_pkt_bg(self.tester, self.send_pks_session)
if self.setup_1pf_2vf_1vm_env_flag == 1:
self.destroy_1pf_2vf_1vm_env()
def tear_down_all(self):
- if self.send_pks_session:
- self.tester.send_expect('killall -s INT scapy', '# ')
- self.tester.destroy_session(self.send_pks_session)
-
if getattr(self, 'vm0', None):
self.vm0.stop()
--
2.7.4
next reply other threads:[~2019-10-15 8:49 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-15 1:24 lihong [this message]
2019-10-15 8:59 ` Zhang, YanX A
2019-10-22 9:06 ` Tu, Lijuan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1571102684-10923-1-git-send-email-lihongx.ma@intel.com \
--to=lihongx.ma@intel.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).