test suite reviews and discussions
 help / color / mirror / Atom feed
From: Xie Wei <weix.xie@intel.com>
To: dts@dpdk.org
Cc: Xie Wei <weix.xie@intel.com>
Subject: [dts] [PATCH V2] tests/port_representor:new automation of port_representor
Date: Mon, 18 Nov 2019 10:53:42 +0800	[thread overview]
Message-ID: <1574045622-140995-1-git-send-email-weix.xie@intel.com> (raw)

new automation of port_representor

Signed-off-by: Xie Wei <weix.xie@intel.com>
---
 tests/TestSuite_port_representor.py | 270 ++++++++++++++++++++++++++++
 1 file changed, 270 insertions(+)
 create mode 100644 tests/TestSuite_port_representor.py

diff --git a/tests/TestSuite_port_representor.py b/tests/TestSuite_port_representor.py
new file mode 100644
index 0000000..04f7838
--- /dev/null
+++ b/tests/TestSuite_port_representor.py
@@ -0,0 +1,270 @@
+# BSD LICENSE
+#
+# Copyright(c) <2019> Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+#   * Redistributions of source code must retain the above copyright
+#     notice, this list of conditions and the following disclaimer.
+#   * Redistributions in binary form must reproduce the above copyright
+#     notice, this list of conditions and the following disclaimer in
+#     the documentation and/or other materials provided with the
+#     distribution.
+#   * Neither the name of Intel Corporation nor the names of its
+#     contributors may be used to endorse or promote products derived
+#     from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+"""
+Use two representor ports as the control plane to manage the two VFs,
+the control plane could change VFs behavior such as change promiscous
+mode, stats reset, etc. our statistical data information is
+independent on the control plane and data plane.
+"""
+
+import time
+import re
+
+from test_case import TestCase
+from dut import Dut
+from packet import Packet
+from pmd_output import PmdOutput
+
+
+class TestPortRepresentor(TestCase):
+    def set_up_all(self):
+        """
+        Prerequisite steps for each test suite.
+        """
+        self.verify(self.nic in ["fortville_eagle", "fortville_spirit",
+                                 "fortville_spirit_single", "fortville_25g"], "NIC Unsupported: " + str(self.nic))
+        self.dut_ports = self.dut.get_ports(self.nic)
+        self.verify(len(self.dut_ports) >= 1, "Insufficient ports")
+
+        self.session_secondary = self.dut.new_session()
+        self.session_third = self.dut.new_session()
+        self.pmdout_pf = PmdOutput(self.dut)
+        self.pmdout_vf0 = PmdOutput(self.dut, self.session_secondary)
+        self.pmdout_vf1 = PmdOutput(self.dut, self.session_third)
+
+        localPort = self.tester.get_local_port(self.dut_ports[0])
+        self.tester_itf = self.tester.get_interface(localPort)
+        self.tester_mac = self.tester.get_mac(localPort)
+        self.pf_mac = self.dut.get_mac_address(0)
+        self.pf_pci = self.dut.ports_info[self.dut_ports[0]]['pci']
+
+        self.unicast_mac = "00:11:22:33:44:55"
+
+        # This is to set up 1pf and 2vfs environment
+        # PF is bound to igb_uio, while VF is bound to vfio-pci.
+        self.dut.generate_sriov_vfs_by_port(self.dut_ports[0], 2, "igb_uio")
+        self.two_vfs_port = self.dut.ports_info[self.dut_ports[0]]["vfs_port"]
+        self.dut.send_expect("modprobe vfio-pci", "#", 3)
+        try:
+            for port in self.two_vfs_port:
+                port.bind_driver(driver="vfio-pci")
+        except Exception as e:
+            self.destroy_env()
+            raise Exception(e)
+        self.vfs_pci = self.dut.ports_info[self.dut_ports[0]]['sriov_vfs_pci']
+
+    def set_up(self):
+        """
+        Run before each test case.
+        """
+        self.vf_flag = 1
+
+    def destroy_env(self):
+        """
+        This is to stop testpmd and destroy 1pf and 2vfs environment.
+        """
+        if self.vf_flag == 1:
+            self.pmdout_vf1.execute_cmd("quit", "#")
+            time.sleep(3)
+            self.pmdout_vf0.execute_cmd("quit", "#")
+            time.sleep(3)
+            self.pmdout_pf.execute_cmd("quit", "#")
+            time.sleep(3)
+        else:
+            self.pmdout_pf.execute_cmd("quit", "#")
+        self.vf_flag = 0
+
+    def testpmd_pf(self):
+        self.pmdout_pf.start_testpmd("Default", eal_param="-w %s,representor=0-1" % self.pf_pci, param="--port-topology=chained")
+
+    def testpmd_vf0(self):
+        self.out_vf0 = self.pmdout_vf0.start_testpmd("Default", eal_param="-w %s --file-prefix testpmd-vf0" % self.vfs_pci[0])
+        self.vf0_mac = self.pmdout_vf0.get_port_mac(0)
+
+    def testpmd_vf1(self):
+        self.out_vf1 = self.pmdout_vf1.start_testpmd("Default", eal_param="-w %s --file-prefix testpmd-vf1" % self.vfs_pci[1])
+        self.vf1_mac = self.pmdout_vf1.get_port_mac(0)
+
+    def check_port_stats(self):
+        """
+        show and check port stats
+        """
+        out = self.pmdout_pf.execute_cmd("show port stats all", "testpmd>")
+        self.logger.info(out)
+        result = re.compile('RX-packets:\s+(.*?)\s+?').findall(out, re.S)
+        return result
+
+    def clear_port_stats(self):
+        """
+        clear port stats in control testpmd
+        """
+        self.pmdout_pf.execute_cmd("clear vf stats 0 0", "testpmd>", 2)
+        self.pmdout_pf.execute_cmd("clear vf stats 0 1", "testpmd>", 2)
+        self.pmdout_pf.execute_cmd("clear port stats all", "testpmd>", 2)
+
+    def test_port_representor_vf_stats_show_and_clear(self):
+        """
+        use control testpmd to get and clear dataplane testpmd ports Stats
+        """
+        self.testpmd_pf()
+        self.pmdout_pf.execute_cmd("set promisc 0 off", "testpmd>")
+        self.pmdout_pf.execute_cmd("start", "testpmd>", 2)
+        self.testpmd_vf0()
+        self.pmdout_vf0.execute_cmd("set promisc 0 off", "testpmd>")
+        self.pmdout_vf0.execute_cmd("start", "testpmd>", 2)
+        self.testpmd_vf1()
+        self.pmdout_vf1.execute_cmd("set promisc 0 off", "testpmd>")
+        self.pmdout_vf1.execute_cmd("start", "testpmd>", 2)
+        # send 30 packets
+        pkt1 = 'Ether(src="%s",dst="%s")/IP()' % (self.tester_mac, self.pf_mac)
+        pkt2 = 'Ether(src="%s",dst="%s")/IP()' % (self.tester_mac, self.vf0_mac)
+        pkt3 = 'Ether(src="%s",dst="%s")/IP()' % (self.tester_mac, self.vf1_mac)
+        pkts = [pkt1, pkt2, pkt3]
+        p = Packet()
+        for i in pkts:
+            p.append_pkt(i)
+        p.send_pkt(self.tester, tx_port=self.tester_itf, count=10)
+        # check port stats in control testpmd
+        result_before = self.check_port_stats()
+        self.verify(int(result_before[1]) == 10 and int(result_before[2]) == 10, "VF Stats show error")
+        self.clear_port_stats()
+        result_after = self.check_port_stats()
+        self.verify(int(result_after[1]) == 0 and int(result_after[2]) == 0, "VF Stats clear error")
+
+    def test_port_representor_vf_promiscous(self):
+        """
+        use control testpmd to enable/disable dataplane testpmd ports promiscous mode
+        """
+        self.testpmd_pf()
+        self.pmdout_pf.execute_cmd("set promisc 0 off", "testpmd>")
+        self.pmdout_pf.execute_cmd("start", "testpmd>", 2)
+        self.testpmd_vf0()
+        self.pmdout_vf0.execute_cmd("start", "testpmd>", 2)
+        self.testpmd_vf1()
+        self.pmdout_vf1.execute_cmd("start", "testpmd>", 2)
+
+        # set vf promisc enable and send 40 packets
+        self.pmdout_pf.execute_cmd("set promisc 1 on", "testpmd>")
+        pkt1 = 'Ether(src="%s",dst="%s")/IP()' % (self.tester_mac, self.pf_mac)
+        pkt2 = 'Ether(src="%s",dst="%s")/IP()' % (self.tester_mac, self.vf0_mac)
+        pkt3 = 'Ether(src="%s",dst="%s")/IP()' % (self.tester_mac, self.vf1_mac)
+        pkt4 = 'Ether(src="%s",dst="%s")/IP()' % (self.tester_mac, self.unicast_mac)
+        pkts = [pkt1, pkt2, pkt3, pkt4]
+        p = Packet()
+        for i in pkts:
+            p.append_pkt(i)
+        p.send_pkt(self.tester, tx_port=self.tester_itf, count=10)
+        # check port stats in control testpmd
+        result_enable = self.check_port_stats()
+        self.verify(int(result_enable[1]) == 20 and int(result_enable[2]) == 20, "VFs receive packets error")
+        self.clear_port_stats()
+        # set vf promisc disable and send 40 packets
+        self.pmdout_pf.execute_cmd("set promisc 1 off", "testpmd>")
+        p = Packet()
+        for i in pkts:
+            p.append_pkt(i)
+        p.send_pkt(self.tester, tx_port=self.tester_itf, count=10)
+        # check port stats in control testpmd
+        result_disable = self.check_port_stats()
+        self.verify(int(result_disable[1]) == 10 and int(result_disable[2]) == 20, "VFs receive packets error")
+
+    def test_port_representor_vf_mac_addr(self):
+        """
+        use control testpmd to set vf mac address
+        """
+        self.testpmd_pf()
+        self.pmdout_pf.execute_cmd("mac_addr set 1 aa:11:22:33:44:55", "testpmd>")
+        self.pmdout_pf.execute_cmd("mac_addr set 2 aa:22:33:44:55:66", "testpmd>")
+        self.pmdout_pf.execute_cmd("set promisc 0 off", "testpmd>")
+        self.pmdout_pf.execute_cmd("start", "testpmd>", 2)
+        self.testpmd_vf0()
+        self.pmdout_vf0.execute_cmd("set promisc 0 off", "testpmd>")
+        self.pmdout_vf0.execute_cmd("start", "testpmd>", 2)
+        self.testpmd_vf1()
+        self.pmdout_vf1.execute_cmd("set promisc 0 off", "testpmd>")
+        self.pmdout_vf1.execute_cmd("start", "testpmd>", 2)
+        # send 40 packets
+        pkt1 = 'Ether(src="%s",dst="%s")/IP()' % (self.tester_mac, self.pf_mac)
+        pkt2 = 'Ether(src="%s",dst="%s")/IP()' % (self.tester_mac, self.vf0_mac)
+        pkt3 = 'Ether(src="%s",dst="%s")/IP()' % (self.tester_mac, self.vf1_mac)
+        pkt4 = 'Ether(src="%s",dst="%s")/IP()' % (self.tester_mac, self.unicast_mac)
+        pkts = [pkt1, pkt2, pkt3, pkt4]
+        p = Packet()
+        for i in pkts:
+            p.append_pkt(i)
+        p.send_pkt(self.tester, tx_port=self.tester_itf, count=10)
+        # check port stats in control testpmd
+        result = self.check_port_stats()
+        self.verify(int(result[1]) == 10 and int(result[2]) == 10, "VFs receive packets error")
+
+    def test_port_representor_vlan_filter(self):
+        """
+        use control testpmd to set vlan
+        """
+        self.testpmd_pf()
+        self.pmdout_pf.execute_cmd("set promisc 1 off", "testpmd>")
+        self.pmdout_pf.execute_cmd("vlan set filter on 1", "testpmd>")
+        self.pmdout_pf.execute_cmd("rx_vlan add 3 1", "testpmd>")
+        self.pmdout_pf.execute_cmd("set promisc 2 off", "testpmd>")
+        self.pmdout_pf.execute_cmd("vlan set filter on 2", "testpmd>")
+        self.pmdout_pf.execute_cmd("rx_vlan add 4 2", "testpmd>")
+        self.pmdout_pf.execute_cmd("start", "testpmd>", 2)
+        self.testpmd_vf0()
+        self.pmdout_vf0.execute_cmd("start", "testpmd>", 2)
+        self.testpmd_vf1()
+        self.pmdout_vf1.execute_cmd("start", "testpmd>", 2)
+        # send 20 packets
+        pkt1 = 'Ether(src="%s",dst="%s")/Dot1Q(vlan=3)/IP()' % (self.tester_mac, self.vf0_mac)
+        pkt2 = 'Ether(src="%s",dst="%s")/Dot1Q(vlan=4)/IP()' % (self.tester_mac, self.vf1_mac)
+        pkts = [pkt1, pkt2]
+        p = Packet()
+        for i in pkts:
+            p.append_pkt(i)
+        p.send_pkt(self.tester, tx_port=self.tester_itf, count=10)
+        # check port stats in control testpmd
+        result = self.check_port_stats()
+        self.verify(int(result[1]) == 10 and int(result[2]) == 10, "VFs receive packets error")
+
+    def tear_down(self):
+        """
+        Run after each test case.
+        """
+        self.destroy_env()
+
+    def tear_down_all(self):
+        """
+        Run after each test suite.
+        """
+        self.dut.kill_all()
+        self.dut.destroy_sriov_vfs_by_port(self.dut_ports[0])
+        self.dut.close_session(self.session_secondary)
+        self.dut.close_session(self.session_third)
-- 
2.17.2


             reply	other threads:[~2019-11-18  2:50 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-18  2:53 Xie Wei [this message]
2019-11-18  3:03 ` Zeng, XiaoxiaoX
2019-11-25  1:15   ` Zhang, Yuwei1
2019-11-27  9:01 ` Tu, Lijuan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1574045622-140995-1-git-send-email-weix.xie@intel.com \
    --to=weix.xie@intel.com \
    --cc=dts@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).