From: lihong <lihongx.ma@intel.com>
To: dts@dpdk.org
Cc: lihong <lihongx.ma@intel.com>
Subject: [dts] [PATCH V1] tests/sriov_kvm: restart testpmd if execute special cmd in cases
Date: Mon, 2 Dec 2019 09:12:43 +0800 [thread overview]
Message-ID: <1575249163-25583-1-git-send-email-lihongx.ma@intel.com> (raw)
if testpmd execute special cmd which maybe effect other cases, restart testpmd
Signed-off-by: lihong <lihongx.ma@intel.com>
---
tests/TestSuite_sriov_kvm.py | 22 +++++++++++++++++++---
1 file changed, 19 insertions(+), 3 deletions(-)
diff --git a/tests/TestSuite_sriov_kvm.py b/tests/TestSuite_sriov_kvm.py
index 546b01c..30b40fb 100644
--- a/tests/TestSuite_sriov_kvm.py
+++ b/tests/TestSuite_sriov_kvm.py
@@ -51,6 +51,8 @@ class TestSriovKvm(TestCase):
self.dut.send_expect('modprobe vfio-pci', '#')
self.setup_2vm_2vf_env_flag = 0
self.setup_2vm_prerequisite_flag = 0
+ self.vm0_testpmd = None
+ self.vm1_testpmd = None
self.setup_2vm_2vf_env()
def set_up(self):
@@ -482,6 +484,12 @@ class TestSriovKvm(TestCase):
self.vm0_testpmd.execute_cmd('stop')
self.vm1_testpmd.execute_cmd('stop')
else:
+ if self.vm0_testpmd:
+ self.vm0_testpmd.quit()
+ self.vm0_testpmd = None
+ if self.vm1_testpmd:
+ self.vm1_testpmd.quit()
+ self.vm1_testpmd = None
self.vm0_dut_ports = self.vm_dut_0.get_ports('any')
self.vm0_testpmd = PmdOutput(self.vm_dut_0)
self.vm0_testpmd.start_testpmd(VM_CORES_MASK)
@@ -532,7 +540,8 @@ class TestSriovKvm(TestCase):
self.vm0_testpmd.execute_cmd("set promisc all off")
self.vm0_testpmd.execute_cmd('start')
- self.setup_2vm_prerequisite_flag = 1
+ # restart testpmd after this cases, because in this case have set some special cmd
+ self.setup_2vm_prerequisite_flag = 0
time.sleep(2)
vm1_start_stats = self.vm1_testpmd.get_pmd_stats(port_id_0)
@@ -755,11 +764,11 @@ class TestSriovKvm(TestCase):
vm0_ret_stats = self.calculate_stats(vm0_start_stats, vm0_end_stats)
- self.verify(self.vm0_testpmd.check_tx_bytes(vm0_ret_stats['RX-packets'], 10 * packet_num),
- "Vlan mirror failed between VM0 and VM1 when set vlan and pool mirror!")
self.host_testpmd.execute_cmd(
'rx_vlan rm %d port %d vf %s' % (vlan_id, port_id_0, vf_mask))
self.reset_port_all_mirror_rule(port_id_0)
+ self.verify(self.vm0_testpmd.check_tx_bytes(vm0_ret_stats['RX-packets'], 10 * packet_num),
+ "Vlan mirror failed between VM0 and VM1 when set vlan and pool mirror!")
def test_two_vms_uplink_and_downlink_mirror(self):
"""
@@ -893,6 +902,7 @@ class TestSriovKvm(TestCase):
vf_num = 0
packet_num = 10
+ self.setup_2vm_prerequisite_flag = 0
for vf_mac in ["00:11:22:33:44:55", "00:55:44:33:22:11"]:
if self.nic.startswith('niantic') or self.nic.startswith('sage'):
set_mac_cmd = "mac_addr add port %d vf %d %s"
@@ -924,6 +934,7 @@ class TestSriovKvm(TestCase):
self.dut.logger.warning("NIC is [%s], skip this case" % self.nic)
return
+ self.setup_2vm_prerequisite_flag = 0
port_id_0 = 0
vf_mac = "00:11:22:33:44:55"
packet_num = 10
@@ -975,6 +986,7 @@ class TestSriovKvm(TestCase):
port_id_0 = 0
packet_num = 10
+ self.setup_2vm_prerequisite_flag = 0
for vf_mac in ["00:55:44:33:22:11", "00:55:44:33:22:66"]:
self.host_testpmd.execute_cmd("set port %d uta %s on" %
(port_id_0, vf_mac))
@@ -1002,6 +1014,7 @@ class TestSriovKvm(TestCase):
self.dut.logger.warning("NIC is [%s], skip this case" % self.nic)
return
+ self.setup_2vm_prerequisite_flag = 0
port_id_0 = 0
vf_mac = "00:55:44:33:22:11"
packet_num = 10
@@ -1039,6 +1052,7 @@ class TestSriovKvm(TestCase):
self.dut.logger.warning("NIC is [%s], skip this case" % self.nic)
return
+ self.setup_2vm_prerequisite_flag = 0
port_id_0 = 0
packet_num = 10
@@ -1080,6 +1094,7 @@ class TestSriovKvm(TestCase):
port_id_0 = 0
packet_num = 10
+ self.setup_2vm_prerequisite_flag = 0
for switch in ['on', 'off', 'on']:
self.host_testpmd.execute_cmd("set port %d vf 0 tx %s" %
(port_id_0, switch))
@@ -1114,6 +1129,7 @@ class TestSriovKvm(TestCase):
vf_mac = "FF:FF:FF:FF:FF:FF"
packet_num = 10
+ self.setup_2vm_prerequisite_flag = 0
for switch in ['on', 'off', 'on']:
self.host_testpmd.execute_cmd("set port %d vf 0 rxmode BAM %s" %
(port_id_0, switch))
--
2.7.4
reply other threads:[~2019-12-02 8:38 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1575249163-25583-1-git-send-email-lihongx.ma@intel.com \
--to=lihongx.ma@intel.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).