From: "zhu,shuai" <shuaix.zhu@intel.com>
To: dts@dpdk.org
Cc: zhaoyan.chen@intel.com, "zhu,shuai" <shuaix.zhu@intel.com>
Subject: [dts] [PATCH V1] tests:Add new test_suite flexible rxd.
Date: Mon, 16 Dec 2019 09:32:08 +0800 [thread overview]
Message-ID: <1576459928-72138-1-git-send-email-shuaix.zhu@intel.com> (raw)
add new test_suite flexible rxd.
Signed-off-by: zhu,shuai <shuaix.zhu@intel.com>
---
tests/TestSuite_flexible_rxd.py | 302 ++++++++++++++++++++++++++++++++
1 file changed, 302 insertions(+)
create mode 100644 tests/TestSuite_flexible_rxd.py
diff --git a/tests/TestSuite_flexible_rxd.py b/tests/TestSuite_flexible_rxd.py
new file mode 100644
index 0000000..9ebd97e
--- /dev/null
+++ b/tests/TestSuite_flexible_rxd.py
@@ -0,0 +1,302 @@
+# Copyright (c) <2019> Intel Corporation
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# - Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+#
+# - Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+#
+# - Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+# SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+# OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+import time
+from test_case import TestCase
+from packet import Packet
+from pmd_output import PmdOutput
+
+TYPE = ["0x8100", "0x88A8", "0x9100"]
+
+
+class TestFlexibleRxd(TestCase):
+
+ def set_up_all(self):
+ """
+ run at the start of each test suite.
+ """
+ self.verify(self.nic in ["columbiaville_25g", "columbiaville_100g"],
+ "flexible rxd only supports CVL NIC.")
+ self.nb_core = 2
+ self.pkg_count = 1
+ self.dut_ports = self.dut.get_ports(self.nic)
+ self.verify(len(self.dut_ports) >= 1, "Insufficient ports for testing")
+ self.pci_info = self.dut.ports_info[0]['pci']
+ self.ports_socket = self.dut.get_numa_id(self.dut_ports[0])
+ self.cores = self.dut.get_core_list("1S/3C/1T", socket=self.ports_socket)
+ self.verify(len(self.cores) >= 3, "The machine has too few cores.")
+ self.tx_interface = self.tester.get_interface(self.tester.get_local_port(self.dut_ports[0]))
+ self.dst_mac = self.dut.get_mac_address(self.dut_ports[0])
+ self.src_mac = self.tester.get_mac(self.tester.get_local_port(self.dut_ports[0]))
+ self.pmdout = PmdOutput(self.dut)
+ self.prepare_test_pmd()
+
+ def set_up(self):
+ """
+ Run before each test case.
+ """
+ pass
+
+ def prepare_test_pmd(self):
+ """
+ Modify the dpdk code.
+ """
+ self.dut.send_expect("cp ./app/test-pmd/util.c .", "#", 15)
+ self.dut.send_expect(
+ "sed -i '/#include <rte_flow.h>/a\#include <rte_pmd_ice.h>' app/test-pmd/util.c", "#", 15)
+ self.dut.send_expect(
+ "sed -i '/if (ol_flags & PKT_RX_TIMESTAMP)/i\ rte_net_ice_dump_proto_xtr_metadata(mb);' app/test-pmd/util.c", "#", 15)
+ self.dut.build_install_dpdk(self.dut.target)
+
+ def restory_test_pmd(self):
+ """
+ Resume editing operation.
+ """
+ self.dut.send_expect("\cp ./util.c ./app/test-pmd/", "#", 15)
+ self.dut.send_expect("rm -rf ./util.c", "#", 15)
+ self.dut.build_install_dpdk(self.dut.target)
+
+ def start_testpmd(self, pkg_type):
+ """
+ start testpmd
+ """
+ eal_params = self.dut.create_eal_parameters(cores=self.cores, ports=[self.pci_info],
+ port_options={self.pci_info: 'proto_xtr=%s' % pkg_type})
+ self.pmdout.execute_cmd("./%s/app/testpmd %s -- -i --rxq=32 --txq=32 --portmask=0x1 --nb-cores=%d" % \
+ (self.target, eal_params, self.nb_core))
+ self.pmdout.execute_cmd("set verbose 1", "testpmd> ", 120)
+ self.pmdout.execute_cmd("set fwd io", "testpmd> ", 120)
+ self.pmdout.execute_cmd("set promisc all off", "testpmd> ", 120)
+ self.pmdout.execute_cmd("clear port stats all", "testpmd> ", 120)
+ self.pmdout.execute_cmd("start", "testpmd> ", 120)
+
+ def verify_result(self, fields_list, out, mesg):
+ """
+ Validation results
+ """
+ for field in fields_list:
+ self.verify(field in out, mesg)
+ self.dut.send_expect("quit", "#", 15)
+
+ def combine_and_send_pkts(self, pkg_type, config, ether_type=None):
+ if pkg_type == 'vlan':
+ num = config['vlan_tag']
+ vlan_list = []
+ for i in range(num):
+ vlan_list.append('Dot1Q(prio=%d+1,vlan=%d+23)' % (i, i))
+ self.vlan_str = '/'.join(vlan_list)
+ pkt_str = 'Ether(src="%s", dst="%s", type=%s)/%s/IP()/UDP()/DNS()' % (self.src_mac, self.dst_mac, ether_type, self.vlan_str)
+ pkt = Packet(pkt_str)
+ else:
+ pkt = Packet(pkt_type=pkg_type, pkt_len=128)
+ pkt.config_layers(config)
+ pkt.send_pkt(self.tester, tx_port=self.tx_interface, count=self.pkg_count, timeout=30)
+ out_info = self.dut.get_session_output(timeout=3)
+ return out_info
+
+ def test_check_single_VLAN_fields_in_RXD_8021Q(self):
+ """
+ Check single VLAN fields in RXD (802.1Q)
+ """
+ self.start_testpmd('vlan')
+ config = {'vlan_tag': 1}
+ out = self.combine_and_send_pkts('vlan', config, ether_type=TYPE[0])
+ mesg = "The packet does not carry a VLAN tag."
+ fields_list = ["vlan"]
+ self.verify_result(fields_list, out, mesg)
+
+ def test_check_single_VLAN_fields_in_RXD_8021ad(self):
+ """
+ Check single VLAN fields in RXD (802.1ad)
+ """
+ self.start_testpmd("vlan")
+ config = {'vlan_tag': 1}
+ out = self.combine_and_send_pkts("vlan", config, ether_type=TYPE[1])
+ mesg = "stag result is not expected (stag=1:0:23)"
+ fields_list = ["stag=1:0:23"]
+ self.verify_result(fields_list, out, mesg)
+
+ def test_check_double_VLAN_fields_in_RXD_8021Q_1_VLAN_tag(self):
+ """
+ Check double VLAN fields in RXD (802.1Q) only 1 VLAN tag
+ """
+ self.start_testpmd("vlan")
+ config = {'vlan_tag': 1}
+ out = self.combine_and_send_pkts("vlan", config, ether_type=TYPE[2])
+ mesg = "stag result is not expected (stag=1:0:23)"
+ fields_list = ["stag=1:0:23"]
+ self.verify_result(fields_list, out, mesg)
+
+ def test_check_double_VLAN_fields_in_RXD_8021Q_2_VLAN_tag(self):
+ """
+ Check double VLAN fields in RXD (802.1Q) 2 VLAN tags
+ """
+ self.start_testpmd("vlan")
+ config = {'vlan_tag': 2}
+ out = self.combine_and_send_pkts("vlan", config, ether_type=TYPE[2])
+ mesg = "There are no related fields in the received VLAN packet"
+ fields_list = ["stag=1:0:23", "ctag=2:0:24"]
+ self.verify_result(fields_list, out, mesg)
+
+ def test_check_double_VLAN_fields_in_RXD_8021ad(self):
+ """
+ Check double VLAN fields in RXD (802.1ad)
+ """
+ self.start_testpmd("vlan")
+ config = {'vlan_tag': 2}
+ out = self.combine_and_send_pkts("vlan", config, ether_type=TYPE[1])
+ mesg = "There are no related fields in the received VLAN packet"
+ fields_list = ["stag=1:0:23", "ctag=2:0:24"]
+ self.verify_result(fields_list, out, mesg)
+
+ def test_check_IPv4_fields_in_RXD(self):
+ """
+ Check IPv4 fields in RXD
+ """
+ self.start_testpmd("ipv4")
+ pkg_type = 'UDP'
+ config = [('ether', {'src': self.src_mac, 'dst': self.dst_mac}),
+ ('ipv4', {'tos': 23, 'ttl': 98})]
+ out = self.combine_and_send_pkts(pkg_type, config)
+ mesg = "There are no related fields in the received IPV4 packet"
+ fields_list = ["ver=4", "hdrlen=5", "tos=23", "ttl=98", "proto=17"]
+ self.verify_result(fields_list, out, mesg)
+
+ def test_check_IPv6_fields_in_RXD(self):
+ """
+ Check IPv6 fields in RXD
+ """
+ self.start_testpmd("ipv6")
+ pkg_type = 'IPv6_UDP'
+ config = [('ether', {'src': self.src_mac, 'dst': self.dst_mac}),
+ ('ipv6', {'tc': 12, 'hlim': 34, 'fl': 0x98765})]
+ out = self.combine_and_send_pkts(pkg_type, config)
+ mesg = "There are no related fields in the received IPV6 packet"
+ fields_list = ["ver=6", "tc=12", "flow_hi4=0x9", "nexthdr=17", "hoplimit=34"]
+ self.verify_result(fields_list, out, mesg)
+
+ def test_check_IPv6_flow_field_in_RXD(self):
+ """
+ Check IPv6 flow field in RXD
+ """
+ self.start_testpmd("ipv6_flow")
+ pkg_type = 'IPv6_UDP'
+ config = [('ether', {'src': self.src_mac, 'dst': self.dst_mac}),
+ ('ipv6', {'tc': 12, 'hlim': 34, 'fl': 0x98765})]
+ out = self.combine_and_send_pkts(pkg_type, config)
+ mesg = "There are no related fields in the received IPV6_flow packet"
+ fields_list = ["ver=6", "tc=12", "flow=0x98765"]
+ self.verify_result(fields_list, out, mesg)
+
+ def test_check_TCP_fields_in_IPv4_in_RXD(self):
+ """
+ Check TCP fields in IPv4 in RXD
+ """
+ self.start_testpmd("tcp")
+ pkg_type = 'TCP'
+ config = [('ether', {'src': self.src_mac, 'dst': self.dst_mac}),
+ ('tcp', {'flags': 'AS'})]
+ out = self.combine_and_send_pkts(pkg_type, config)
+ mesg = "There are no related fields in the received TCP packet"
+ fields_list = ["doff=5", "flags=AS"]
+ self.verify_result(fields_list, out, mesg)
+
+ def test_check_TCP_fields_in_IPv6_in_RXD(self):
+ """
+ Check TCP fields in IPv6 in RXD
+ """
+ self.start_testpmd("tcp")
+ pkg_type = 'IPv6_TCP'
+ config = [('ether', {'src': self.src_mac, 'dst': self.dst_mac}),
+ ('tcp', {'flags': 'S'})]
+ out = self.combine_and_send_pkts(pkg_type, config)
+ mesg = "There are no related fields in the received TCP packet"
+ fields_list = ["doff=5", "flags=S"]
+ self.verify_result(fields_list, out, mesg)
+
+ def test_check_IPv4_IPv6_TCP_fields_in_RXD_on_specific_queues(self):
+ """
+ Check IPv4, IPv6, TCP fields in RXD on specific queues
+ """
+ self.start_testpmd("'[(2):ipv4,(3):ipv6,(4):tcp]'")
+ self.dut.send_expect(
+ "flow create 0 ingress pattern eth dst is %s / ipv4 src is 192.168.0.1 dst is 192.168.0.2 tos is 23 ttl is 98 / end actions queue index 2 / end" % self.dst_mac, "created")
+ self.dut.send_expect(
+ "flow create 0 ingress pattern eth / ipv6 src is 2001::3 dst is 2001::4 tc is 12 / end actions queue index 3 / end", "created")
+ self.dut.send_expect(
+ "flow create 0 ingress pattern eth dst is %s / ipv4 src is 192.168.0.1 dst is 192.168.0.2 / tcp src is 25 dst is 23 / end actions queue index 4 / end" % self.dst_mac, "created")
+
+ # send IPv4
+ pkg_type = 'UDP'
+ config = [('ether', {'dst': self.dst_mac}),
+ ('ipv4', {'src': '192.168.0.1', 'dst': '192.168.0.2', 'tos': 23, 'ttl': 98})]
+ out1 = self.combine_and_send_pkts(pkg_type, config)
+ mesg1 = "There are no relevant fields in the received IPv4 packet."
+ fields_list1 = ["Receive queue=0x2", "ver=4", "hdrlen=5", "tos=23", "ttl=98", "proto=17"]
+ for field1 in fields_list1:
+ self.verify(field1 in out1, mesg1)
+
+ # send IPv6
+ pkg_type = 'IPv6_UDP'
+ config = [('ether', {'src': self.src_mac, 'dst': self.dst_mac}),
+ ('ipv6', {'src': '2001::3', 'dst': '2001::4', 'tc': 12, 'hlim': 34, 'fl': 0x98765})]
+ out2 = self.combine_and_send_pkts(pkg_type, config)
+ mesg2 = "There are no relevant fields in the received IPv6 packet."
+ fields_list2 = ["Receive queue=0x3", "ver=6", "tc=12", "flow_hi4=0x9", "nexthdr=17", "hoplimit=34"]
+ for field2 in fields_list2:
+ self.verify(field2 in out2, mesg2)
+
+ # send TCP
+ pkg_type = 'TCP'
+ config = [('ether', {'dst': self.dst_mac}),
+ ('ipv4', {'src': '192.168.0.1', 'dst': '192.168.0.2'}),
+ ('tcp', {'flags': 'AS', 'src': 25, 'dst': 23})]
+ out3 = self.combine_and_send_pkts(pkg_type, config)
+ mesg3 = "There are no relevant fields in the received TCP packet."
+ fields_list3 = ["Receive queue=0x4", "doff=5", "flags=AS"]
+ for field3 in fields_list3:
+ self.verify(field3 in out3, mesg3)
+ self.dut.send_expect("quit", "#", 15)
+
+ def tear_down(self):
+ """
+ Run after each test case.
+ """
+ self.dut.kill_all()
+ time.sleep(2)
+
+ def tear_down_all(self):
+ """
+ Run after each test suite.
+ """
+ self.restory_test_pmd()
--
2.17.2
next reply other threads:[~2019-12-16 1:27 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-16 1:32 zhu,shuai [this message]
2019-12-26 5:48 ` Chen, Zhaoyan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1576459928-72138-1-git-send-email-shuaix.zhu@intel.com \
--to=shuaix.zhu@intel.com \
--cc=dts@dpdk.org \
--cc=zhaoyan.chen@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).