From: Zeng Xiaoxiao <xiaoxiaox.zeng@intel.com>
To: dts@dpdk.org
Cc: Zeng Xiaoxiao <xiaoxiaox.zeng@intel.com>
Subject: [dts] [PATCH V1] tests/port_control: automation port_contol
Date: Tue, 31 Dec 2019 16:59:02 +0800 [thread overview]
Message-ID: <1577782742-84298-1-git-send-email-xiaoxiaox.zeng@intel.com> (raw)
*.according to port_control_test_plan.rst,automation suite port_control
Signed-off-by: Zeng Xiaoxiao <xiaoxiaox.zeng@intel.com>
---
tests/TestSuite_port_control.py | 260 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 260 insertions(+)
create mode 100644 tests/TestSuite_port_control.py
diff --git a/tests/TestSuite_port_control.py b/tests/TestSuite_port_control.py
new file mode 100644
index 0000000..a458add
--- /dev/null
+++ b/tests/TestSuite_port_control.py
@@ -0,0 +1,260 @@
+# BSD LICENSE
+#
+# Copyright(c) <2019> Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+import os
+import utils
+import time
+import re
+import packet
+from test_case import TestCase
+from pmd_output import PmdOutput
+from virt_common import VM
+
+
+class TestPortControl(TestCase):
+
+ def set_up_all(self):
+ """
+ Run before each test suite
+ """
+ # initialize ports topology
+ self.vm0 = None
+ self.env_done = False
+ self.port_id_0 = 0
+ self.pkt_count = 1000
+ self.dut_ports = self.dut.get_ports(self.nic)
+ # Verify that enough ports are available
+ self.verify(len(self.dut_ports) >= 1, "Insufficient ports for testing")
+ self.pf_mac = self.dut.get_mac_address(self.dut_ports[0])
+ self.vf_mac = "00:01:23:45:67:89"
+ self.txitf = self.tester.get_interface(self.tester.get_local_port(self.dut_ports[0]))
+ self.host_testpmd = PmdOutput(self.dut)
+ self.vf_assign_method = 'vfio-pci'
+ self.dut.send_expect('modprobe vfio-pci', '#')
+ self.socket = self.dut.get_numa_id(self.dut_ports[0])
+ port = self.dut.ports_info[0]['port']
+ self.pf_default_driver = port.get_nic_driver()
+
+ def set_up(self):
+ """
+ Run before each test case.
+ """
+ pass
+
+ def setup_vm_env(self, driver='default'):
+ """
+ Create testing environment with 1VF generated from 1PF
+ """
+ if self.env_done:
+ return
+
+ # bind to default driver
+ self.bind_nic_driver(self.dut_ports[:1], driver="")
+ self.used_dut_port = self.dut_ports[0]
+ self.host_intf = self.dut.ports_info[self.used_dut_port]['intf']
+ self.dut.generate_sriov_vfs_by_port(self.used_dut_port, 1, driver=driver)
+ self.sriov_vfs_port = self.dut.ports_info[self.used_dut_port]['vfs_port']
+ self.dut.send_expect("ip link set %s vf 0 mac %s" % (self.host_intf, self.vf_mac), "# ")
+ try:
+ for port in self.sriov_vfs_port:
+ port.bind_driver(self.vf_assign_method)
+ time.sleep(1)
+ vf_popt = {'opt_host': self.sriov_vfs_port[0].pci}
+
+ # set up VM ENV
+ self.vm = VM(self.dut, 'vm0', 'port_control')
+ self.vm.set_vm_device(driver=self.vf_assign_method, **vf_popt)
+ self.vm_dut = self.vm.start()
+ if self.vm_dut is None:
+ raise Exception("Set up VM ENV failed!")
+
+ self.vm_testpmd = PmdOutput(self.vm_dut)
+
+ except Exception as e:
+ self.destroy_vm_env()
+ raise Exception(e)
+
+ self.env_done = True
+
+ def destroy_vm_env(self):
+ if getattr(self, 'vm', None):
+ if getattr(self, 'vm_dut', None):
+ self.vm_dut.kill_all()
+ self.vm_testpmd = None
+ self.vm_dut_ports = None
+ # destroy vm0
+ self.vm.stop()
+ self.dut.virt_exit()
+ time.sleep(3)
+ self.vm = None
+
+ if getattr(self, 'used_dut_port', None) != None:
+ self.dut.destroy_sriov_vfs_by_port(self.used_dut_port)
+ self.used_dut_port = None
+ self.bind_nic_driver(self.dut_ports[:1], driver=self.pf_default_driver)
+
+ self.env_done = False
+
+ def bind_nic_driver(self, ports, driver=""):
+ # modprobe vfio driver
+ if driver == "vfio-pci":
+ for port in ports:
+ netdev = self.dut.ports_info[port]['port']
+ driver = netdev.get_nic_driver()
+ if driver != 'vfio-pci':
+ netdev.bind_driver(driver=self.d)
+
+ elif driver == "igb_uio":
+ # igb_uio should insmod as default, no need to check
+ for port in ports:
+ netdev = self.dut.ports_info[port]['port']
+ driver = netdev.get_nic_driver()
+ if driver != 'igb_uio':
+ netdev.bind_driver(driver='igb_uio')
+ else:
+ for port in ports:
+ netdev = self.dut.ports_info[port]['port']
+ driver_now = netdev.get_nic_driver()
+ if driver is None:
+ driver = netdev.default_driver
+ if driver != driver_now:
+ netdev.bind_driver(driver=driver)
+
+ def start_testpmd(self, terminal):
+ terminal.start_testpmd(ports=[0], socket=self.socket)
+ res = terminal.wait_link_status_up('all', timeout=5)
+ self.verify(res is True, 'there have port link is down')
+ terminal.execute_cmd('set fwd mac')
+ terminal.execute_cmd('set promisc all off')
+
+ def start_pmd_port(self, terminal):
+ terminal.execute_cmd("port start all")
+ terminal.execute_cmd("start")
+ terminal.wait_link_status_up('all', timeout=5)
+ ret = terminal.get_port_link_status(self.port_id_0)
+ self.verify(ret == "up", "port not up!")
+
+ def stop_pmd_port(self, terminal):
+ terminal.execute_cmd("stop")
+ terminal.execute_cmd("port stop all")
+ ret = terminal.get_port_link_status(self.port_id_0)
+ self.verify(ret == "down", "port not down!")
+
+ def reset_pmd_port(self, terminal):
+ terminal.execute_cmd("port reset all")
+ ret = terminal.get_port_link_status(self.port_id_0)
+ self.verify(ret == "down", "port reset fail!")
+
+ def close_pmd_port(self, terminal):
+ terminal.execute_cmd("port close all")
+ ret = terminal.execute_cmd("show port info all")
+ ret = ret.split('\r')
+ self.verify(ret[1] == '', "close all port fail!")
+
+ def calculate_stats(self, start_stats, end_stats):
+ ret_stats = {}
+ ret_stats['RX-packets'] = int(end_stats['RX-packets']) - int(start_stats['RX-packets'])
+ ret_stats['TX-packets'] = int(end_stats['TX-packets']) - int(start_stats['TX-packets'])
+ return ret_stats
+
+ def send_and_verify_packets(self, terminal):
+ """
+ Send packets according to parameters.
+ """
+ if terminal is self.host_testpmd:
+ self.dts_mac = self.pf_mac
+ else:
+ self.dts_mac = self.vf_mac
+
+ self.pkt = packet.Packet('Ether(dst="%s")/IP()/Raw("x"*40)' % self.dts_mac)
+
+ pf_start_stats = terminal.get_pmd_stats(self.port_id_0)
+ self.pkt.send_pkt(crb=self.tester, tx_port=self.txitf, count=self.pkt_count, timeout=30)
+ pf_end_stats = terminal.get_pmd_stats(self.port_id_0)
+ pf_ret_stats = self.calculate_stats(pf_start_stats, pf_end_stats)
+
+ self.verify(pf_ret_stats['RX-packets'] == self.pkt_count and pf_ret_stats['TX-packets'] == self.pkt_count,
+ "Packets receive and forward fail!")
+
+ def test_pf_start_stop_reset_close(self):
+ self.start_testpmd(self.host_testpmd)
+ # start port
+ self.start_pmd_port(self.host_testpmd)
+ self.send_and_verify_packets(self.host_testpmd)
+ # stop port and start port
+ self.stop_pmd_port(self.host_testpmd)
+ self.start_pmd_port(self.host_testpmd)
+ self.send_and_verify_packets(self.host_testpmd)
+ # reset port
+ self.stop_pmd_port(self.host_testpmd)
+ self.reset_pmd_port(self.host_testpmd)
+ self.start_pmd_port(self.host_testpmd)
+ self.send_and_verify_packets(self.host_testpmd)
+ # close all port
+ self.stop_pmd_port(self.host_testpmd)
+ self.close_pmd_port(self.host_testpmd)
+
+ def test_e1000_start_stop_reset_close(self):
+ self.setup_vm_env()
+ self.start_testpmd(self.vm_testpmd)
+ # start port
+ self.start_pmd_port(self.vm_testpmd)
+ self.send_and_verify_packets(self.vm_testpmd)
+ # stop port and start port
+ self.stop_pmd_port(self.vm_testpmd)
+ self.start_pmd_port(self.vm_testpmd)
+ self.send_and_verify_packets(self.vm_testpmd)
+ # reset port
+ self.stop_pmd_port(self.vm_testpmd)
+ self.reset_pmd_port(self.vm_testpmd)
+ self.start_pmd_port(self.vm_testpmd)
+ self.send_and_verify_packets(self.vm_testpmd)
+ # close all port
+ self.stop_pmd_port(self.vm_testpmd)
+ self.close_pmd_port(self.vm_testpmd)
+
+ def tear_down(self):
+ """
+ Run after each test case.
+ """
+ if self.env_done:
+ self.vm_testpmd.quit()
+ self.destroy_vm_env()
+ else:
+ self.host_testpmd.quit()
+
+ def tear_down_all(self):
+ """
+ Run after each test suite.
+ """
+ if self.env_done:
+ self.destroy_vm_env()
+ self.dut.kill_all()
--
1.8.3.1
next reply other threads:[~2019-12-31 8:58 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-31 8:59 Zeng Xiaoxiao [this message]
2019-12-31 9:05 ` Zeng, XiaoxiaoX
2019-12-31 9:31 ` Lu, Nannan
2020-01-02 5:16 ` Tu, Lijuan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1577782742-84298-1-git-send-email-xiaoxiaox.zeng@intel.com \
--to=xiaoxiaox.zeng@intel.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).