From: Lijuan Tu <lijuan.tu@intel.com>
To: dts@dpdk.org
Cc: Lijuan Tu <lijuan.tu@intel.com>
Subject: [dts] [PATCH V3] tests/vf_l3fwd: add a perf case for fvl iavf
Date: Wed, 19 Feb 2020 22:32:50 +0800 [thread overview]
Message-ID: <1582122770-39488-1-git-send-email-lijuan.tu@intel.com> (raw)
* add a new test case: kernel_pf_dpdk_iavf_perf
* fix mapping of pf/vf driver
Signed-off-by: Lijuan Tu <lijuan.tu@intel.com>
---
v3: restore dpdk after testing
v2: add a new case: kernel_pf_dpdk_iavf_perf
v1: fix mapping of pf/vf driver
tests/TestSuite_vf_l3fwd.py | 63 +++++++++++++++++++++++++++++++++++----------
1 file changed, 50 insertions(+), 13 deletions(-)
diff --git a/tests/TestSuite_vf_l3fwd.py b/tests/TestSuite_vf_l3fwd.py
index 760b920..ad7d4a2 100644
--- a/tests/TestSuite_vf_l3fwd.py
+++ b/tests/TestSuite_vf_l3fwd.py
@@ -107,27 +107,26 @@ class TestVfL3fwd(TestCase):
"""
self.setup_vf_env_flag = 0
- def setup_vf_env(self, host_driver='default'):
+ def setup_vf_env(self, host_driver='default', vf_driver='vfio-pci'):
"""
require enough PF ports,using kernel or dpdk driver, create 1 VF from each PF.
"""
+ if host_driver != "default" and host_driver != "igb_uio":
+ self.logger.error("only support kernel driver and igb_uio!")
self.used_dut_port = [port for port in self.dut_ports]
self.sriov_vfs_port = []
for i in valports:
- if host_driver != '':
- self.dut.generate_sriov_vfs_by_port(self.used_dut_port[i], 1)
- else:
- self.dut.generate_sriov_vfs_by_port(self.used_dut_port[i], 1, host_driver)
+ self.dut.generate_sriov_vfs_by_port(self.used_dut_port[i], 1, host_driver)
sriov_vfs_port = self.dut.ports_info[self.used_dut_port[i]]['vfs_port']
self.sriov_vfs_port.append(sriov_vfs_port)
# bind vf to vf driver
try:
for i in valports:
for port in self.sriov_vfs_port[i]:
- port.bind_driver(self.vf_driver)
+ port.bind_driver(vf_driver)
time.sleep(1)
# set vf mac address.
- if host_driver == '':
+ if host_driver == 'default':
for i in valports:
pf_intf = self.dut.ports_info[i]['port'].get_interface_name()
self.dut.send_expect("ip link set %s vf 0 mac %s" % (pf_intf, self.vfs_mac[i]), "#")
@@ -260,11 +259,11 @@ class TestVfL3fwd(TestCase):
self.dut.close_session(l3fwd_session)
self.result_table_print()
- def measure_vf_performance(self, host_driver='default'):
+ def measure_vf_performance(self, host_driver='default', vf_driver='vfio-pci'):
"""
start l3fwd and run the perf test
"""
- self.setup_vf_env(host_driver)
+ self.setup_vf_env(host_driver, vf_driver)
eal_param = ""
for i in valports:
eal_param += " -w " + self.sriov_vfs_port[i][0].pci
@@ -281,17 +280,54 @@ class TestVfL3fwd(TestCase):
for j in range(self.queue):
queue_config += "({0}, {1}, {2})," .format(i, j, core_list[m])
m += 1
- cmdline = "./examples/l3fwd/build/l3fwd -c {0} -n 4 {1} -- -p {2} --config '{3}' ". \
+ cmdline = "./examples/l3fwd/build/l3fwd -c {0} -n 4 {1} -- -p {2} --config '{3}' --parse-ptype". \
format(core_mask, eal_param, port_mask, queue_config)
self.perf_test(cmdline)
- def test_perf_kernel_pf_dpdk_vf_perf_host_only(self):
+ def get_kernel_pf_vf_driver(self):
+ if self.vf_driver == "igb_uio" or self.vf_driver == "vfio-pci":
+ vf_driver = self.vf_driver
+ elif self.drivername == "igb_uio" or self.drivername == "vfio-pci":
+ vf_driver = self.drivername
+ else:
+ vf_driver = "vfio-pci"
+ return vf_driver
- self.measure_vf_performance(host_driver='')
+ def test_perf_kernel_pf_dpdk_vf_perf_host_only(self):
+ self.measure_vf_performance(host_driver='default', vf_driver=self.get_kernel_pf_vf_driver())
def test_perf_dpdk_pf_dpdk_vf_perf_host_only(self):
+ for idx in self.dut_ports:
+ self.verify(self.dut.ports_info[idx]['port'].default_driver != 'ice', 'Columbiaville do not support generate vfs from igb_uio')
+
+ if self.drivername != "igb_uio":
+ self.logger.warning("Use igb_uio as host driver for testing instead of %s" % self.drivername)
+
+ self.measure_vf_performance(host_driver='igb_uio', vf_driver='igb_uio')
+
+ def test_perf_kernel_pf_dpdk_iavf_perf_host_only(self):
+ """
+ Need to change dpdk code to test FVL iavf.
+ CVL iavf testing is same as FVL VF, so use dpdk_pf_dpdk_vf_perf_host_only to test CVL iavf
+ """
+ for idx in self.dut_ports:
+ self.verify(self.dut.ports_info[idx]['port'].default_driver == 'i40e', 'The case is only designed for Fortville')
+
+ self.build_iavf()
+ self.dut.build_dpdk_apps("./examples/l3fwd")
+ self.measure_vf_performance(host_driver='default', vf_driver=self.get_kernel_pf_vf_driver())
+
+ def build_iavf(self):
+ self.dut.send_expect("sed -i '/{ RTE_PCI_DEVICE(IAVF_INTEL_VENDOR_ID, IAVF_DEV_ID_ADAPTIVE_VF) },/a { RTE_PCI_DEVICE(IAVF_INTEL_VENDOR_ID, IAVF_DEV_ID_VF) },' drivers/net/iavf/iavf_ethdev.c", "# ")
+ self.dut.send_expect("sed -i -e '/I40E_DEV_ID_VF/s/0x154C/0x164C/g' drivers/net/i40e/base/i40e_devids.h", "# ")
+ self.dut.build_install_dpdk(self.target)
+
+ def restore_dpdk(self):
+ if self.running_case == "test_perf_kernel_pf_dpdk_iavf_perf_host_only":
+ self.dut.send_expect("sed -i '/{ RTE_PCI_DEVICE(IAVF_INTEL_VENDOR_ID, IAVF_DEV_ID_VF) }/d' drivers/net/iavf/iavf_ethdev.c", "# ")
+ self.dut.send_expect("sed -i -e '/I40E_DEV_ID_VF/s/0x164C/0x154C/g' drivers/net/i40e/base/i40e_devids.h", "# ")
+ self.dut.build_install_dpdk(self.target)
- self.measure_vf_performance(host_driver=self.vf_driver)
def set_fields(self):
"""
@@ -306,6 +342,7 @@ class TestVfL3fwd(TestCase):
self.destroy_vf_env()
for port_id in self.dut_ports:
self.dut.destroy_sriov_vfs_by_port(port_id)
+ self.restore_dpdk()
def tear_down_all(self):
pass
--
1.8.3.1
reply other threads:[~2020-02-19 6:24 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1582122770-39488-1-git-send-email-lijuan.tu@intel.com \
--to=lijuan.tu@intel.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).