* Re: [dts] [PATCH V1 2/2] tests/pvp_multi_paths_virtio_single_core_performance: modify code to support per patch performance
2020-02-27 18:52 ` [dts] [PATCH V1 2/2] tests/pvp_multi_paths_virtio_single_core_performance: modify code to support per patch performance lihong
@ 2020-02-28 2:22 ` Ma, LihongX
2020-03-03 7:15 ` Tu, Lijuan
1 sibling, 0 replies; 7+ messages in thread
From: Ma, LihongX @ 2020-02-28 2:22 UTC (permalink / raw)
To: dts
Tested-by:ma,lihong<lihongx.ma@intel.com>
Regards,
Ma,lihong
-----Original Message-----
From: Ma, LihongX
Sent: Friday, February 28, 2020 2:52 AM
To: dts@dpdk.org
Cc: Ma, LihongX <lihongx.ma@intel.com>
Subject: [dts][PATCH V1 2/2] tests/pvp_multi_paths_virtio_single_core_performance: modify code to support per patch performance
Signed-off-by: lihong <lihongx.ma@intel.com>
---
...p_multi_paths_virtio_single_core_performance.py | 214 ++++++++++++++++++---
1 file changed, 192 insertions(+), 22 deletions(-)
diff --git a/tests/TestSuite_pvp_multi_paths_virtio_single_core_performance.py b/tests/TestSuite_pvp_multi_paths_virtio_single_core_performance.py
index 53b073b..53d8144 100644
--- a/tests/TestSuite_pvp_multi_paths_virtio_single_core_performance.py
+++ b/tests/TestSuite_pvp_multi_paths_virtio_single_core_performance.py
@@ -34,10 +34,16 @@ DPDK Test suite.
Test PVP virtio single core performance using virtio_user on 8 tx/rx path.
"""
+import json
+import rst
+import os
import utils
from test_case import TestCase
from packet import Packet
from pktgen import PacketGeneratorHelper
+from settings import UPDATE_EXPECTED, load_global_setting from copy
+import deepcopy
+
class TestPVPMultiPathVirtioPerformance(TestCase):
@@ -63,39 +69,59 @@ class TestPVPMultiPathVirtioPerformance(TestCase):
self.tester.send_expect('mkdir -p %s' % self.out_path, '# ')
# create an instance to set stream field setting
self.pktgen_helper = PacketGeneratorHelper()
+ self.vhost_user = self.dut.new_session(suite="user")
+ self.vhost = self.dut.new_session(suite="vhost")
+ self.save_result_flag = True
+ self.json_obj = {}
def set_up(self):
"""
Run before each test case.
"""
- self.vhost_user = self.dut.new_session(suite="user")
- self.vhost = self.dut.new_session(suite="vhost")
# Prepare the result table
self.table_header = ['Frame']
- self.table_header.append("Mode")
+ self.table_header.append("Mode/RXD-TXD")
self.table_header.append("Mpps")
self.table_header.append("% linerate")
self.result_table_create(self.table_header)
+ self.test_parameters = self.get_suite_cfg()['test_parameters']
+ # test parameters include: frames size, descriptor numbers
+ self.test_parameters = self.get_suite_cfg()['test_parameters']
+
+ # traffic duraion in second
+ self.test_duration = self.get_suite_cfg()['test_duration']
+
+ # initilize throughput attribution
+ # {'$framesize':{"$nb_desc": 'throughput'}
+ self.throughput = {}
+
+ # Accepted tolerance in Mpps
+ self.gap = self.get_suite_cfg()['accepted_tolerance']
+ self.test_result = {}
+ self.nb_desc = self.test_parameters[64][0]
+
def send_and_verify(self, case_info):
"""
Send packet with packet generator and verify
"""
for frame_size in self.frame_sizes:
tgen_input = []
- for port in range(self.number_of_ports):
- rx_port = self.tester.get_local_port(
- self.dut_ports[port % self.number_of_ports])
- tx_port = self.tester.get_local_port(
- self.dut_ports[(port) % self.number_of_ports])
- destination_mac = self.dut.get_mac_address(
- self.dut_ports[(port) % self.number_of_ports])
+ self.throughput[frame_size] = dict()
+ self.logger.info("Test running at parameters: " +
+ "framesize: {}, rxd/txd: {}".format(frame_size, self.nb_desc))
+ rx_port = self.tester.get_local_port(
+ self.dut_ports[0])
+ tx_port = self.tester.get_local_port(
+ self.dut_ports[0])
+ destination_mac = self.dut.get_mac_address(
+ self.dut_ports[0])
- pkt = Packet(pkt_type='UDP', pkt_len=frame_size)
- pkt.config_layer('ether', {'dst': '%s' % destination_mac})
- pkt.save_pcapfile(self.tester, "%s/multi_path_%d.pcap" % (self.out_path, port))
+ pkt = Packet(pkt_type='UDP', pkt_len=frame_size)
+ pkt.config_layer('ether', {'dst': '%s' % destination_mac})
+ pkt.save_pcapfile(self.tester, "%s/multi_path.pcap" %
+ (self.out_path))
- tgen_input.append((tx_port, rx_port, "%s/multi_path_%d.pcap" % (self.out_path, port)))
+ tgen_input.append((tx_port, rx_port, "%s/multi_path.pcap" %
+ (self.out_path)))
self.tester.pktgen.clear_streams()
streams = self.pktgen_helper.prepare_stream_from_tginput(tgen_input, 100, None, self.tester.pktgen) @@ -103,15 +129,16 @@ class TestPVPMultiPathVirtioPerformance(TestCase):
traffic_opt = {'delay': 5}
_, pps = self.tester.pktgen.measure_throughput(stream_ids=streams, options=traffic_opt)
Mpps = pps / 1000000.0
- self.verify(Mpps > 0, "%s can not receive packets of frame size %d" % (self.running_case, frame_size))
+ self.verify(Mpps > 0.0, "%s can not receive packets of
+ frame size %d" % (self.running_case, frame_size))
- throughput = Mpps * 100 / \
+ linerate = Mpps * 100 / \
float(self.wirespeed(self.nic, frame_size, self.number_of_ports))
+ self.throughput[frame_size][self.nb_desc] = Mpps
results_row = [frame_size]
results_row.append(case_info)
results_row.append(Mpps)
- results_row.append(throughput)
+ results_row.append(linerate)
self.result_table_add(results_row)
@property
@@ -132,7 +159,8 @@ class TestPVPMultiPathVirtioPerformance(TestCase):
vdevs=['net_vhost0,iface=vhost-net,queues=1,client=0'])
if self.check_2M_env:
eal_param += " --single-file-segments"
- command_line_client = "./%s/app/testpmd " % self.target + eal_param + ' -- -i --nb-cores=2 --txd=1024 --rxd=1024'
+ command_line_client = "./%s/app/testpmd " % self.target + eal_param + \
+ ' -- -i --nb-cores=2 --txd=%d --rxd=%d' %
+ (self.nb_desc, self.nb_desc)
self.vhost.send_expect(command_line_client, "testpmd> ", 120)
self.vhost.send_expect("set fwd io", "testpmd> ", 120)
self.vhost.send_expect("start", "testpmd> ", 120) @@ -144,11 +172,109 @@ class TestPVPMultiPathVirtioPerformance(TestCase):
eal_param = self.dut.create_eal_parameters(socket=self.ports_socket, cores=self.core_list_user, prefix='virtio', no_pci=True, vdevs=['net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,%s' % args["version"]])
if self.check_2M_env:
eal_param += " --single-file-segments"
- command_line_user = "./%s/app/testpmd " % self.target + eal_param + " -- -i %s --rss-ip --nb-cores=1 --txd=1024 --rxd=1024" % args["path"]
+ command_line_user = "./%s/app/testpmd " % self.target + eal_param + \
+ " -- -i %s --rss-ip --nb-cores=1 --txd=%d --rxd=%d" % (
+ args["path"], self.nb_desc, self.nb_desc)
self.vhost_user.send_expect(command_line_user, "testpmd> ", 120)
self.vhost_user.send_expect("set fwd mac", "testpmd> ", 120)
self.vhost_user.send_expect("start", "testpmd> ", 120)
+ def handle_expected(self):
+ """
+ Update expected numbers to configurate file: conf/$suite_name.cfg
+ """
+ if load_global_setting(UPDATE_EXPECTED) == "yes":
+ for frame_size in self.test_parameters.keys():
+ for nb_desc in self.test_parameters[frame_size]:
+ self.expected_throughput[frame_size][nb_desc] =
+ round(self.throughput[frame_size][nb_desc], 3)
+
+ def handle_results(self):
+ """
+ results handled process:
+ 1, save to self.test_results
+ 2, create test results table
+ 3, save to json file for Open Lab
+ """
+ header = self.table_header
+ header.append("Expected Throughput")
+ header.append("Throughput Difference")
+ for frame_size in self.test_parameters.keys():
+ wirespeed = self.wirespeed(self.nic, frame_size, self.number_of_ports)
+ ret_datas = {}
+ for nb_desc in self.test_parameters[frame_size]:
+ ret_data = {}
+ ret_data[header[0]] = frame_size
+ ret_data[header[1]] = nb_desc
+ ret_data[header[2]] = "{:.3f} Mpps".format(
+ self.throughput[frame_size][nb_desc])
+ ret_data[header[3]] = "{:.3f}%".format(
+ self.throughput[frame_size][nb_desc] * 100 / wirespeed)
+ ret_data[header[4]] = "{:.3f} Mpps".format(
+ self.expected_throughput[frame_size][nb_desc])
+ ret_data[header[5]] = "{:.3f} Mpps".format(
+ self.throughput[frame_size][nb_desc] -
+ self.expected_throughput[frame_size][nb_desc])
+ ret_datas[nb_desc] = deepcopy(ret_data)
+ self.test_result[frame_size] = deepcopy(ret_datas)
+ # Create test results table
+ self.result_table_create(header)
+ for frame_size in self.test_parameters.keys():
+ for nb_desc in self.test_parameters[frame_size]:
+ table_row = list()
+ for i in range(len(header)):
+ table_row.append(
+ self.test_result[frame_size][nb_desc][header[i]])
+ self.result_table_add(table_row)
+ # present test results to screen
+ self.result_table_print()
+ # save test results as a file
+ if self.save_result_flag:
+ self.save_result(self.test_result)
+
+ def save_result(self, data):
+ '''
+ Saves the test results as a separated file named with
+ self.nic+_perf_virtio_user_pvp.json in output folder
+ if self.save_result_flag is True
+ '''
+ case_name = self.running_case
+ self.json_obj[case_name] = list()
+ status_result = []
+ for frame_size in self.test_parameters.keys():
+ for nb_desc in self.test_parameters[frame_size]:
+ row_in = self.test_result[frame_size][nb_desc]
+ row_dict0 = dict()
+ row_dict0['performance'] = list()
+ row_dict0['parameters'] = list()
+ row_dict0['parameters'] = list()
+ result_throughput = float(row_in['Mpps'].split()[0])
+ expected_throughput = float(row_in['Expected Throughput'].split()[0])
+ # delta value and accepted tolerance in percentage
+ delta = result_throughput - expected_throughput
+ gap = expected_throughput * -self.gap * 0.01
+ delta = float(delta)
+ gap = float(gap)
+ self.logger.info("Accept tolerance are (Mpps) %f" % gap)
+ self.logger.info("Throughput Difference are (Mpps) %f" % delta)
+ if result_throughput > expected_throughput + gap:
+ row_dict0['status'] = 'PASS'
+ else:
+ row_dict0['status'] = 'FAIL'
+ self.verify(row_dict0['status'] == 'PASS', 'The throughput is not in correct range')
+ row_dict1 = dict(name="Throughput", value=result_throughput, unit="Mpps", delta=delta)
+ row_dict2 = dict(name="Txd/Rxd", value=row_in["Mode/RXD-TXD"], unit="descriptor")
+ row_dict3 = dict(name="frame_size", value=row_in["Frame"], unit="bytes")
+ row_dict0['performance'].append(row_dict1)
+ row_dict0['parameters'].append(row_dict2)
+ row_dict0['parameters'].append(row_dict3)
+ self.json_obj[case_name].append(row_dict0)
+ status_result.append(row_dict0['status'])
+ with open(os.path.join(rst.path2Result,
+ '{0:s}_{1}.json'.format(
+ self.nic, self.suite_name)), 'w') as fp:
+ json.dump(self.json_obj, fp)
+ self.verify("Fail" not in status_result, "Exceeded Gap")
+
def close_all_testpmd(self):
"""
close all testpmd of vhost and virtio @@ -167,119 +293,163 @@ class TestPVPMultiPathVirtioPerformance(TestCase):
"""
performance for Vhost PVP virtio 1.1 Mergeable Path.
"""
+ self.test_target = self.running_case
+ self.expected_throughput =
+ self.get_suite_cfg()['expected_throughput'][self.test_target]
virtio_pmd_arg = {"version": "packed_vq=1,in_order=0,mrg_rxbuf=1",
"path": "--tx-offloads=0x0 --enable-hw-vlan-strip"}
self.start_vhost_testpmd()
self.start_virtio_testpmd(virtio_pmd_arg)
self.send_and_verify("virtio_1.1_mergeable on")
self.close_all_testpmd()
+ self.logger.info('result of all framesize result')
self.result_table_print()
+ self.handle_expected()
+ self.handle_results()
def test_perf_virtio_single_core_virtio11_normal(self):
"""
performance for Vhost PVP virtio1.1 Normal Path.
"""
+ self.test_target = self.running_case
+ self.expected_throughput =
+ self.get_suite_cfg()['expected_throughput'][self.test_target]
virtio_pmd_arg = {"version": "packed_vq=1,in_order=0,mrg_rxbuf=0",
"path": "--tx-offloads=0x0 --enable-hw-vlan-strip"}
self.start_vhost_testpmd()
self.start_virtio_testpmd(virtio_pmd_arg)
self.send_and_verify("virtio_1.1_normal")
self.close_all_testpmd()
+ self.logger.info('result of all framesize result')
self.result_table_print()
+ self.handle_expected()
+ self.handle_results()
def test_perf_virtio_single_core_virtio11_inorder_mergeable(self):
"""
performance for Vhost PVP virtio 1.1 inorder Mergeable Path.
"""
+ self.test_target = self.running_case
+ self.expected_throughput =
+ self.get_suite_cfg()['expected_throughput'][self.test_target]
virtio_pmd_arg = {"version": "packed_vq=1,in_order=1,mrg_rxbuf=1",
"path": "--tx-offloads=0x0 --enable-hw-vlan-strip"}
self.start_vhost_testpmd()
self.start_virtio_testpmd(virtio_pmd_arg)
self.send_and_verify("virtio_1.1_inorder_mergeable on")
self.close_all_testpmd()
+ self.logger.info('result of all framesize result')
self.result_table_print()
+ self.handle_expected()
+ self.handle_results()
def test_perf_virtio_single_core_virtio11_inorder_normal(self):
"""
performance for Vhost PVP virtio1.1 inorder Normal Path.
"""
+ self.test_target = self.running_case
+ self.expected_throughput =
+ self.get_suite_cfg()['expected_throughput'][self.test_target]
virtio_pmd_arg = {"version": "packed_vq=1,in_order=1,mrg_rxbuf=0",
"path": "--tx-offloads=0x0 --enable-hw-vlan-strip"}
self.start_vhost_testpmd()
self.start_virtio_testpmd(virtio_pmd_arg)
self.send_and_verify("virtio_1.1_inorder_normal")
self.close_all_testpmd()
+ self.logger.info('result of all framesize result')
self.result_table_print()
+ self.handle_expected()
+ self.handle_results()
def test_perf_virtio_single_core_inorder_mergeable(self):
"""
performance for Vhost PVP In_order mergeable Path.
"""
+ self.test_target = self.running_case
+ self.expected_throughput =
+ self.get_suite_cfg()['expected_throughput'][self.test_target]
virtio_pmd_arg = {"version": "packed_vq=0,in_order=1,mrg_rxbuf=1",
"path": "--tx-offloads=0x0 --enable-hw-vlan-strip"}
self.start_vhost_testpmd()
self.start_virtio_testpmd(virtio_pmd_arg)
self.send_and_verify("inoder mergeable on")
self.close_all_testpmd()
+ self.logger.info('result of all framesize result')
self.result_table_print()
+ self.handle_expected()
+ self.handle_results()
def test_perf_virtio_single_core_inorder_no_mergeable(self):
"""
performance for Vhost PVP In_order no_mergeable Path.
"""
+ self.test_target = self.running_case
+ self.expected_throughput =
+ self.get_suite_cfg()['expected_throughput'][self.test_target]
virtio_pmd_arg = {"version": "packed_vq=0,in_order=1,mrg_rxbuf=0",
"path": "--tx-offloads=0x0 --enable-hw-vlan-strip"}
self.start_vhost_testpmd()
self.start_virtio_testpmd(virtio_pmd_arg)
self.send_and_verify("inoder mergeable off")
self.close_all_testpmd()
+ self.logger.info('result of all framesize result')
self.result_table_print()
+ self.handle_expected()
+ self.handle_results()
def test_perf_virtio_single_core_mergeable(self):
"""
performance for Vhost PVP Mergeable Path.
"""
+ self.test_target = self.running_case
+ self.expected_throughput =
+ self.get_suite_cfg()['expected_throughput'][self.test_target]
virtio_pmd_arg = {"version": "packed_vq=0,in_order=0,mrg_rxbuf=1",
"path": "--tx-offloads=0x0 --enable-hw-vlan-strip"}
self.start_vhost_testpmd()
self.start_virtio_testpmd(virtio_pmd_arg)
self.send_and_verify("virito mergeable")
self.close_all_testpmd()
+ self.logger.info('result of all framesize result')
self.result_table_print()
+ self.handle_expected()
+ self.handle_results()
def test_perf_virtio_single_core_normal(self):
"""
performance for Vhost PVP Normal Path.
"""
+ self.test_target = self.running_case
+ self.expected_throughput =
+ self.get_suite_cfg()['expected_throughput'][self.test_target]
virtio_pmd_arg = {"version": "packed_vq=0,in_order=0,mrg_rxbuf=0",
"path": "--tx-offloads=0x0 --enable-hw-vlan-strip"}
self.start_vhost_testpmd()
self.start_virtio_testpmd(virtio_pmd_arg)
self.send_and_verify("virito normal")
self.close_all_testpmd()
+ self.logger.info('result of all framesize result')
self.result_table_print()
+ self.handle_expected()
+ self.handle_results()
def test_perf_virtio_single_core_vector_rx(self):
"""
performance for Vhost PVP Vector Path
"""
+ self.test_target = self.running_case
+ self.expected_throughput =
+ self.get_suite_cfg()['expected_throughput'][self.test_target]
virtio_pmd_arg = {"version": "packed_vq=0,in_order=0,mrg_rxbuf=0",
"path": "--tx-offloads=0x0"}
self.start_vhost_testpmd()
self.start_virtio_testpmd(virtio_pmd_arg)
self.send_and_verify("virtio vector rx")
self.close_all_testpmd()
+ self.logger.info('result of all framesize result')
self.result_table_print()
+ self.handle_expected()
+ self.handle_results()
def tear_down(self):
"""
Run after each test case.
"""
- self.dut.send_expect("killall -s INT testpmd", "#")
- self.close_all_session()
+ self.dut.kill_all()
def tear_down_all(self):
"""
Run after each test suite.
"""
- pass
+ self.close_all_session()
--
2.7.4
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: [dts] [PATCH V1 2/2] tests/pvp_multi_paths_virtio_single_core_performance: modify code to support per patch performance
2020-02-27 18:52 ` [dts] [PATCH V1 2/2] tests/pvp_multi_paths_virtio_single_core_performance: modify code to support per patch performance lihong
2020-02-28 2:22 ` Ma, LihongX
@ 2020-03-03 7:15 ` Tu, Lijuan
1 sibling, 0 replies; 7+ messages in thread
From: Tu, Lijuan @ 2020-03-03 7:15 UTC (permalink / raw)
To: Ma, LihongX, dts; +Cc: Ma, LihongX
Applied failed, could you please rework it, thanks
> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of lihong
> Sent: Friday, February 28, 2020 2:52 AM
> To: dts@dpdk.org
> Cc: Ma, LihongX <lihongx.ma@intel.com>
> Subject: [dts] [PATCH V1 2/2]
> tests/pvp_multi_paths_virtio_single_core_performance: modify code to
> support per patch performance
>
> Signed-off-by: lihong <lihongx.ma@intel.com>
> ---
> ...p_multi_paths_virtio_single_core_performance.py | 214
> ++++++++++++++++++---
> 1 file changed, 192 insertions(+), 22 deletions(-)
>
> diff --git
> a/tests/TestSuite_pvp_multi_paths_virtio_single_core_performance.py
> b/tests/TestSuite_pvp_multi_paths_virtio_single_core_performance.py
> index 53b073b..53d8144 100644
> --- a/tests/TestSuite_pvp_multi_paths_virtio_single_core_performance.py
> +++ b/tests/TestSuite_pvp_multi_paths_virtio_single_core_performance.py
> @@ -34,10 +34,16 @@ DPDK Test suite.
> Test PVP virtio single core performance using virtio_user on 8 tx/rx path.
> """
>
> +import json
> +import rst
> +import os
> import utils
> from test_case import TestCase
> from packet import Packet
> from pktgen import PacketGeneratorHelper
> +from settings import UPDATE_EXPECTED, load_global_setting from copy
> +import deepcopy
> +
>
>
> class TestPVPMultiPathVirtioPerformance(TestCase):
> @@ -63,39 +69,59 @@ class TestPVPMultiPathVirtioPerformance(TestCase):
> self.tester.send_expect('mkdir -p %s' % self.out_path, '# ')
> # create an instance to set stream field setting
> self.pktgen_helper = PacketGeneratorHelper()
> + self.vhost_user = self.dut.new_session(suite="user")
> + self.vhost = self.dut.new_session(suite="vhost")
> + self.save_result_flag = True
> + self.json_obj = {}
>
> def set_up(self):
> """
> Run before each test case.
> """
> - self.vhost_user = self.dut.new_session(suite="user")
> - self.vhost = self.dut.new_session(suite="vhost")
> # Prepare the result table
> self.table_header = ['Frame']
> - self.table_header.append("Mode")
> + self.table_header.append("Mode/RXD-TXD")
> self.table_header.append("Mpps")
> self.table_header.append("% linerate")
> self.result_table_create(self.table_header)
>
> + self.test_parameters = self.get_suite_cfg()['test_parameters']
> + # test parameters include: frames size, descriptor numbers
> + self.test_parameters = self.get_suite_cfg()['test_parameters']
> +
> + # traffic duraion in second
> + self.test_duration = self.get_suite_cfg()['test_duration']
> +
> + # initilize throughput attribution
> + # {'$framesize':{"$nb_desc": 'throughput'}
> + self.throughput = {}
> +
> + # Accepted tolerance in Mpps
> + self.gap = self.get_suite_cfg()['accepted_tolerance']
> + self.test_result = {}
> + self.nb_desc = self.test_parameters[64][0]
> +
> def send_and_verify(self, case_info):
> """
> Send packet with packet generator and verify
> """
> for frame_size in self.frame_sizes:
> tgen_input = []
> - for port in range(self.number_of_ports):
> - rx_port = self.tester.get_local_port(
> - self.dut_ports[port % self.number_of_ports])
> - tx_port = self.tester.get_local_port(
> - self.dut_ports[(port) % self.number_of_ports])
> - destination_mac = self.dut.get_mac_address(
> - self.dut_ports[(port) % self.number_of_ports])
> + self.throughput[frame_size] = dict()
> + self.logger.info("Test running at parameters: " +
> + "framesize: {}, rxd/txd: {}".format(frame_size, self.nb_desc))
> + rx_port = self.tester.get_local_port(
> + self.dut_ports[0])
> + tx_port = self.tester.get_local_port(
> + self.dut_ports[0])
> + destination_mac = self.dut.get_mac_address(
> + self.dut_ports[0])
>
> - pkt = Packet(pkt_type='UDP', pkt_len=frame_size)
> - pkt.config_layer('ether', {'dst': '%s' % destination_mac})
> - pkt.save_pcapfile(self.tester, "%s/multi_path_%d.pcap" %
> (self.out_path, port))
> + pkt = Packet(pkt_type='UDP', pkt_len=frame_size)
> + pkt.config_layer('ether', {'dst': '%s' % destination_mac})
> + pkt.save_pcapfile(self.tester, "%s/multi_path.pcap" %
> + (self.out_path))
>
> - tgen_input.append((tx_port, rx_port, "%s/multi_path_%d.pcap" %
> (self.out_path, port)))
> + tgen_input.append((tx_port, rx_port, "%s/multi_path.pcap" %
> + (self.out_path)))
>
> self.tester.pktgen.clear_streams()
> streams =
> self.pktgen_helper.prepare_stream_from_tginput(tgen_input, 100, None,
> self.tester.pktgen) @@ -103,15 +129,16 @@ class
> TestPVPMultiPathVirtioPerformance(TestCase):
> traffic_opt = {'delay': 5}
> _, pps = self.tester.pktgen.measure_throughput(stream_ids=streams,
> options=traffic_opt)
> Mpps = pps / 1000000.0
> - self.verify(Mpps > 0, "%s can not receive packets of frame size %d" %
> (self.running_case, frame_size))
> + self.verify(Mpps > 0.0, "%s can not receive packets of
> + frame size %d" % (self.running_case, frame_size))
>
> - throughput = Mpps * 100 / \
> + linerate = Mpps * 100 / \
> float(self.wirespeed(self.nic, frame_size,
> self.number_of_ports))
> + self.throughput[frame_size][self.nb_desc] = Mpps
>
> results_row = [frame_size]
> results_row.append(case_info)
> results_row.append(Mpps)
> - results_row.append(throughput)
> + results_row.append(linerate)
> self.result_table_add(results_row)
>
> @property
> @@ -132,7 +159,8 @@ class TestPVPMultiPathVirtioPerformance(TestCase):
> vdevs=['net_vhost0,iface=vhost-
> net,queues=1,client=0'])
> if self.check_2M_env:
> eal_param += " --single-file-segments"
> - command_line_client = "./%s/app/testpmd " % self.target + eal_param
> + ' -- -i --nb-cores=2 --txd=1024 --rxd=1024'
> + command_line_client = "./%s/app/testpmd " % self.target + eal_param
> + \
> + ' -- -i --nb-cores=2 --txd=%d --rxd=%d' %
> + (self.nb_desc, self.nb_desc)
> self.vhost.send_expect(command_line_client, "testpmd> ", 120)
> self.vhost.send_expect("set fwd io", "testpmd> ", 120)
> self.vhost.send_expect("start", "testpmd> ", 120) @@ -144,11 +172,109
> @@ class TestPVPMultiPathVirtioPerformance(TestCase):
> eal_param = self.dut.create_eal_parameters(socket=self.ports_socket,
> cores=self.core_list_user, prefix='virtio', no_pci=True,
> vdevs=['net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,%s' %
> args["version"]])
> if self.check_2M_env:
> eal_param += " --single-file-segments"
> - command_line_user = "./%s/app/testpmd " % self.target + eal_param +
> " -- -i %s --rss-ip --nb-cores=1 --txd=1024 --rxd=1024" % args["path"]
> + command_line_user = "./%s/app/testpmd " % self.target + eal_param +
> \
> + " -- -i %s --rss-ip --nb-cores=1 --txd=%d --rxd=%d" % (
> + args["path"], self.nb_desc, self.nb_desc)
> self.vhost_user.send_expect(command_line_user, "testpmd> ", 120)
> self.vhost_user.send_expect("set fwd mac", "testpmd> ", 120)
> self.vhost_user.send_expect("start", "testpmd> ", 120)
>
> + def handle_expected(self):
> + """
> + Update expected numbers to configurate file: conf/$suite_name.cfg
> + """
> + if load_global_setting(UPDATE_EXPECTED) == "yes":
> + for frame_size in self.test_parameters.keys():
> + for nb_desc in self.test_parameters[frame_size]:
> + self.expected_throughput[frame_size][nb_desc] =
> + round(self.throughput[frame_size][nb_desc], 3)
> +
> + def handle_results(self):
> + """
> + results handled process:
> + 1, save to self.test_results
> + 2, create test results table
> + 3, save to json file for Open Lab
> + """
> + header = self.table_header
> + header.append("Expected Throughput")
> + header.append("Throughput Difference")
> + for frame_size in self.test_parameters.keys():
> + wirespeed = self.wirespeed(self.nic, frame_size,
> self.number_of_ports)
> + ret_datas = {}
> + for nb_desc in self.test_parameters[frame_size]:
> + ret_data = {}
> + ret_data[header[0]] = frame_size
> + ret_data[header[1]] = nb_desc
> + ret_data[header[2]] = "{:.3f} Mpps".format(
> + self.throughput[frame_size][nb_desc])
> + ret_data[header[3]] = "{:.3f}%".format(
> + self.throughput[frame_size][nb_desc] * 100 / wirespeed)
> + ret_data[header[4]] = "{:.3f} Mpps".format(
> + self.expected_throughput[frame_size][nb_desc])
> + ret_data[header[5]] = "{:.3f} Mpps".format(
> + self.throughput[frame_size][nb_desc] -
> + self.expected_throughput[frame_size][nb_desc])
> + ret_datas[nb_desc] = deepcopy(ret_data)
> + self.test_result[frame_size] = deepcopy(ret_datas)
> + # Create test results table
> + self.result_table_create(header)
> + for frame_size in self.test_parameters.keys():
> + for nb_desc in self.test_parameters[frame_size]:
> + table_row = list()
> + for i in range(len(header)):
> + table_row.append(
> + self.test_result[frame_size][nb_desc][header[i]])
> + self.result_table_add(table_row)
> + # present test results to screen
> + self.result_table_print()
> + # save test results as a file
> + if self.save_result_flag:
> + self.save_result(self.test_result)
> +
> + def save_result(self, data):
> + '''
> + Saves the test results as a separated file named with
> + self.nic+_perf_virtio_user_pvp.json in output folder
> + if self.save_result_flag is True
> + '''
> + case_name = self.running_case
> + self.json_obj[case_name] = list()
> + status_result = []
> + for frame_size in self.test_parameters.keys():
> + for nb_desc in self.test_parameters[frame_size]:
> + row_in = self.test_result[frame_size][nb_desc]
> + row_dict0 = dict()
> + row_dict0['performance'] = list()
> + row_dict0['parameters'] = list()
> + row_dict0['parameters'] = list()
> + result_throughput = float(row_in['Mpps'].split()[0])
> + expected_throughput = float(row_in['Expected
> Throughput'].split()[0])
> + # delta value and accepted tolerance in percentage
> + delta = result_throughput - expected_throughput
> + gap = expected_throughput * -self.gap * 0.01
> + delta = float(delta)
> + gap = float(gap)
> + self.logger.info("Accept tolerance are (Mpps) %f" % gap)
> + self.logger.info("Throughput Difference are (Mpps) %f" % delta)
> + if result_throughput > expected_throughput + gap:
> + row_dict0['status'] = 'PASS'
> + else:
> + row_dict0['status'] = 'FAIL'
> + self.verify(row_dict0['status'] == 'PASS', 'The throughput is not in
> correct range')
> + row_dict1 = dict(name="Throughput", value=result_throughput,
> unit="Mpps", delta=delta)
> + row_dict2 = dict(name="Txd/Rxd", value=row_in["Mode/RXD-
> TXD"], unit="descriptor")
> + row_dict3 = dict(name="frame_size", value=row_in["Frame"],
> unit="bytes")
> + row_dict0['performance'].append(row_dict1)
> + row_dict0['parameters'].append(row_dict2)
> + row_dict0['parameters'].append(row_dict3)
> + self.json_obj[case_name].append(row_dict0)
> + status_result.append(row_dict0['status'])
> + with open(os.path.join(rst.path2Result,
> + '{0:s}_{1}.json'.format(
> + self.nic, self.suite_name)), 'w') as fp:
> + json.dump(self.json_obj, fp)
> + self.verify("Fail" not in status_result, "Exceeded Gap")
> +
> def close_all_testpmd(self):
> """
> close all testpmd of vhost and virtio @@ -167,119 +293,163 @@ class
> TestPVPMultiPathVirtioPerformance(TestCase):
> """
> performance for Vhost PVP virtio 1.1 Mergeable Path.
> """
> + self.test_target = self.running_case
> + self.expected_throughput =
> + self.get_suite_cfg()['expected_throughput'][self.test_target]
> virtio_pmd_arg = {"version": "packed_vq=1,in_order=0,mrg_rxbuf=1",
> "path": "--tx-offloads=0x0 --enable-hw-vlan-strip"}
> self.start_vhost_testpmd()
> self.start_virtio_testpmd(virtio_pmd_arg)
> self.send_and_verify("virtio_1.1_mergeable on")
> self.close_all_testpmd()
> + self.logger.info('result of all framesize result')
> self.result_table_print()
> + self.handle_expected()
> + self.handle_results()
>
> def test_perf_virtio_single_core_virtio11_normal(self):
> """
> performance for Vhost PVP virtio1.1 Normal Path.
> """
> + self.test_target = self.running_case
> + self.expected_throughput =
> + self.get_suite_cfg()['expected_throughput'][self.test_target]
> virtio_pmd_arg = {"version": "packed_vq=1,in_order=0,mrg_rxbuf=0",
> "path": "--tx-offloads=0x0 --enable-hw-vlan-strip"}
> self.start_vhost_testpmd()
> self.start_virtio_testpmd(virtio_pmd_arg)
> self.send_and_verify("virtio_1.1_normal")
> self.close_all_testpmd()
> + self.logger.info('result of all framesize result')
> self.result_table_print()
> + self.handle_expected()
> + self.handle_results()
>
> def test_perf_virtio_single_core_virtio11_inorder_mergeable(self):
> """
> performance for Vhost PVP virtio 1.1 inorder Mergeable Path.
> """
> + self.test_target = self.running_case
> + self.expected_throughput =
> + self.get_suite_cfg()['expected_throughput'][self.test_target]
> virtio_pmd_arg = {"version": "packed_vq=1,in_order=1,mrg_rxbuf=1",
> "path": "--tx-offloads=0x0 --enable-hw-vlan-strip"}
> self.start_vhost_testpmd()
> self.start_virtio_testpmd(virtio_pmd_arg)
> self.send_and_verify("virtio_1.1_inorder_mergeable on")
> self.close_all_testpmd()
> + self.logger.info('result of all framesize result')
> self.result_table_print()
> + self.handle_expected()
> + self.handle_results()
>
> def test_perf_virtio_single_core_virtio11_inorder_normal(self):
> """
> performance for Vhost PVP virtio1.1 inorder Normal Path.
> """
> + self.test_target = self.running_case
> + self.expected_throughput =
> + self.get_suite_cfg()['expected_throughput'][self.test_target]
> virtio_pmd_arg = {"version": "packed_vq=1,in_order=1,mrg_rxbuf=0",
> "path": "--tx-offloads=0x0 --enable-hw-vlan-strip"}
> self.start_vhost_testpmd()
> self.start_virtio_testpmd(virtio_pmd_arg)
> self.send_and_verify("virtio_1.1_inorder_normal")
> self.close_all_testpmd()
> + self.logger.info('result of all framesize result')
> self.result_table_print()
> + self.handle_expected()
> + self.handle_results()
>
> def test_perf_virtio_single_core_inorder_mergeable(self):
> """
> performance for Vhost PVP In_order mergeable Path.
> """
> + self.test_target = self.running_case
> + self.expected_throughput =
> + self.get_suite_cfg()['expected_throughput'][self.test_target]
> virtio_pmd_arg = {"version": "packed_vq=0,in_order=1,mrg_rxbuf=1",
> "path": "--tx-offloads=0x0 --enable-hw-vlan-strip"}
> self.start_vhost_testpmd()
> self.start_virtio_testpmd(virtio_pmd_arg)
> self.send_and_verify("inoder mergeable on")
> self.close_all_testpmd()
> + self.logger.info('result of all framesize result')
> self.result_table_print()
> + self.handle_expected()
> + self.handle_results()
>
> def test_perf_virtio_single_core_inorder_no_mergeable(self):
> """
> performance for Vhost PVP In_order no_mergeable Path.
> """
> + self.test_target = self.running_case
> + self.expected_throughput =
> + self.get_suite_cfg()['expected_throughput'][self.test_target]
> virtio_pmd_arg = {"version": "packed_vq=0,in_order=1,mrg_rxbuf=0",
> "path": "--tx-offloads=0x0 --enable-hw-vlan-strip"}
> self.start_vhost_testpmd()
> self.start_virtio_testpmd(virtio_pmd_arg)
> self.send_and_verify("inoder mergeable off")
> self.close_all_testpmd()
> + self.logger.info('result of all framesize result')
> self.result_table_print()
> + self.handle_expected()
> + self.handle_results()
>
> def test_perf_virtio_single_core_mergeable(self):
> """
> performance for Vhost PVP Mergeable Path.
> """
> + self.test_target = self.running_case
> + self.expected_throughput =
> + self.get_suite_cfg()['expected_throughput'][self.test_target]
> virtio_pmd_arg = {"version": "packed_vq=0,in_order=0,mrg_rxbuf=1",
> "path": "--tx-offloads=0x0 --enable-hw-vlan-strip"}
> self.start_vhost_testpmd()
> self.start_virtio_testpmd(virtio_pmd_arg)
> self.send_and_verify("virito mergeable")
> self.close_all_testpmd()
> + self.logger.info('result of all framesize result')
> self.result_table_print()
> + self.handle_expected()
> + self.handle_results()
>
> def test_perf_virtio_single_core_normal(self):
> """
> performance for Vhost PVP Normal Path.
> """
> + self.test_target = self.running_case
> + self.expected_throughput =
> + self.get_suite_cfg()['expected_throughput'][self.test_target]
> virtio_pmd_arg = {"version": "packed_vq=0,in_order=0,mrg_rxbuf=0",
> "path": "--tx-offloads=0x0 --enable-hw-vlan-strip"}
> self.start_vhost_testpmd()
> self.start_virtio_testpmd(virtio_pmd_arg)
> self.send_and_verify("virito normal")
> self.close_all_testpmd()
> + self.logger.info('result of all framesize result')
> self.result_table_print()
> + self.handle_expected()
> + self.handle_results()
>
> def test_perf_virtio_single_core_vector_rx(self):
> """
> performance for Vhost PVP Vector Path
> """
> + self.test_target = self.running_case
> + self.expected_throughput =
> + self.get_suite_cfg()['expected_throughput'][self.test_target]
> virtio_pmd_arg = {"version": "packed_vq=0,in_order=0,mrg_rxbuf=0",
> "path": "--tx-offloads=0x0"}
> self.start_vhost_testpmd()
> self.start_virtio_testpmd(virtio_pmd_arg)
> self.send_and_verify("virtio vector rx")
> self.close_all_testpmd()
> + self.logger.info('result of all framesize result')
> self.result_table_print()
> + self.handle_expected()
> + self.handle_results()
>
> def tear_down(self):
> """
> Run after each test case.
> """
> - self.dut.send_expect("killall -s INT testpmd", "#")
> - self.close_all_session()
> + self.dut.kill_all()
>
> def tear_down_all(self):
> """
> Run after each test suite.
> """
> - pass
> + self.close_all_session()
> --
> 2.7.4
^ permalink raw reply [flat|nested] 7+ messages in thread