From: Xu Hailin <hailinx.xu@intel.com>
To: dts@dpdk.org
Cc: xuhailin <hailinx.xu@intel.com>
Subject: [dts] [PATCH v1]tests/TestSuite_generic_flow_api:add support nic carlsville.
Date: Mon, 13 Apr 2020 13:37:49 +0800 [thread overview]
Message-ID: <1586756269-125434-1-git-send-email-hailinx.xu@intel.com> (raw)
From: xuhailin <hailinx.xu@intel.com>
carlsville driver is i40e, so the nic support the suite.
Signed-off-by: xuhailin <hailinx.xu@intel.com>
---
tests/TestSuite_generic_flow_api.py | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/tests/TestSuite_generic_flow_api.py b/tests/TestSuite_generic_flow_api.py
index bb42bf7..560d907 100644
--- a/tests/TestSuite_generic_flow_api.py
+++ b/tests/TestSuite_generic_flow_api.py
@@ -868,7 +868,7 @@ class TestGeneric_flow_api(TestCase):
only supported by i40e
"""
self.verify(self.nic in ["fortville_eagle", "fortville_spirit",
- "fortville_spirit_single", "fortpark_TLV"], "%s nic not support fdir L2 payload filter" % self.nic)
+ "fortville_spirit_single", "fortpark_TLV", "carlsville"], "%s nic not support fdir L2 payload filter" % self.nic)
self.pmdout.start_testpmd("%s" % self.pf_cores, "--pkt-filter-mode=perfect --rxq=%d --txq=%d" % (MAX_QUEUE+1, MAX_QUEUE+1), "-w %s --file-prefix=test1" % self.pf_pci)
self.dut.send_expect("set fwd rxonly", "testpmd> ", 120)
@@ -889,7 +889,7 @@ class TestGeneric_flow_api(TestCase):
only supported by i40e
"""
self.verify(self.nic in ["fortville_eagle", "fortville_spirit",
- "fortville_spirit_single", "fortpark_TLV"], "%s nic not support fdir vlan filter" % self.nic)
+ "fortville_spirit_single", "fortpark_TLV", "carlsville"], "%s nic not support fdir vlan filter" % self.nic)
self.setup_env()
# start testpmd on pf
self.pmdout.start_testpmd("%s" % self.pf_cores, "--pkt-filter-mode=perfect --disable-rss --rxq=%d --txq=%d" % (MAX_QUEUE+1, MAX_QUEUE+1), "-w %s --file-prefix=pf --socket-mem 1024,1024 --legacy-mem" % self.pf_pci)
@@ -981,11 +981,11 @@ class TestGeneric_flow_api(TestCase):
"""
self.verify(self.nic in ["niantic", "columbiaville_25g","columbiaville_100g","twinville", "sagepond", "sageville",
"fortville_eagle", "fortville_spirit",
- "fortville_spirit_single", "fortpark_TLV"],
+ "fortville_spirit_single", "fortpark_TLV", "carlsville"],
"%s nic not support fdir ipv4 filter" % self.nic)
# i40e
if (self.nic in ["fortville_eagle", "fortville_spirit","columbiaville_25g","columbiaville_100g",
- "fortville_spirit_single", "fortpark_TLV"]):
+ "fortville_spirit_single", "fortpark_TLV", "carlsville"]):
self.setup_env()
# start testpmd on pf
self.pmdout.start_testpmd("%s" % self.pf_cores, "--pkt-filter-mode=perfect --disable-rss --rxq=%d --txq=%d" % (MAX_QUEUE+1, MAX_QUEUE+1), "-w %s --file-prefix=pf --socket-mem 1024,1024 --legacy-mem" % self.pf_pci)
@@ -1090,11 +1090,11 @@ class TestGeneric_flow_api(TestCase):
"""
self.verify(self.nic in ["niantic", "twinville", "sagepond", "sageville","columbiaville_25g","columbiaville_100g",
"fortville_eagle", "fortville_spirit",
- "fortville_spirit_single", "fortpark_TLV"],
+ "fortville_spirit_single", "fortpark_TLV", "carlsville"],
"%s nic not support fdir ipv6 filter" % self.nic)
# i40e
if (self.nic in ["fortville_eagle", "fortville_spirit","columbiaville_25g","columbiaville_100g",
- "fortville_spirit_single", "fortpark_TLV"]):
+ "fortville_spirit_single", "fortpark_TLV", "carlsville"]):
self.setup_env()
self.pmdout.start_testpmd("%s" % self.pf_cores, "--pkt-filter-mode=perfect --disable-rss --rxq=%d --txq=%d" % (MAX_QUEUE+1, MAX_QUEUE+1), "-w %s --file-prefix=pf --socket-mem 1024,1024 --legacy-mem" % self.pf_pci)
self.dut.send_expect("set fwd rxonly", "testpmd> ", 120)
@@ -1210,11 +1210,11 @@ class TestGeneric_flow_api(TestCase):
"""
self.verify(self.nic in ["niantic", "twinville", "sagepond", "sageville",
"fortville_eagle", "fortville_spirit",
- "fortville_spirit_single", "fortpark_TLV"],
+ "fortville_spirit_single", "fortpark_TLV", "carlsville"],
"%s nic not support fdir flexbytes filter" % self.nic)
# i40e
if (self.nic in ["fortville_eagle", "fortville_spirit",
- "fortville_spirit_single", "fortpark_TLV"]):
+ "fortville_spirit_single", "fortpark_TLV", "carlsville"]):
self.pmdout.start_testpmd("%s" % self.pf_cores, "--pkt-filter-mode=perfect --disable-rss --rxq=%d --txq=%d" % (MAX_QUEUE+1, MAX_QUEUE+1), "-w %s --file-prefix=pf" % self.pf_pci)
self.dut.send_expect("set fwd rxonly", "testpmd> ", 120)
self.dut.send_expect("set verbose 1", "testpmd> ", 120)
@@ -1538,7 +1538,7 @@ class TestGeneric_flow_api(TestCase):
only supported by i40e
"""
self.verify(self.nic in ["fortville_eagle", "fortville_spirit","columbiaville_25g","columbiaville_100g",
- "fortville_spirit_single", "fortpark_TLV"],
+ "fortville_spirit_single", "fortpark_TLV", "carlsville"],
"%s nic not support tunnel vxlan filter" % self.nic)
self.setup_env()
@@ -1602,7 +1602,7 @@ class TestGeneric_flow_api(TestCase):
only supported by i40e
"""
self.verify(self.nic in ["fortville_eagle", "fortville_spirit","columbiaville_25g","columbiaville_100g",
- "fortville_spirit_single", "fortpark_TLV"],
+ "fortville_spirit_single", "fortpark_TLV", "carlsville"],
"%s nic not support tunnel nvgre filter" % self.nic)
self.setup_env()
--
2.17.1
next reply other threads:[~2020-04-13 5:45 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-13 5:37 Xu Hailin [this message]
2020-04-20 5:21 ` Tu, Lijuan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1586756269-125434-1-git-send-email-hailinx.xu@intel.com \
--to=hailinx.xu@intel.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).