[dts] [PATCH] test_plan/shutdown_api: add allmulticast mode test plan

[dts] [PATCH] test_plan/shutdown_api: add allmulticast mode test plan

[Xueqin Lin]

Signed-off-by: Xueqin Lin <xueqin.lin@intel.com>

---
 test_plans/shutdown_api_test_plan.rst | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/test_plans/shutdown_api_test_plan.rst b/test_plans/shutdown_api_test_plan.rst
index c2dd415..83a495a 100644
--- a/test_plans/shutdown_api_test_plan.rst
+++ b/test_plans/shutdown_api_test_plan.rst
@@ -114,6 +114,30 @@ Test Case: Set promiscuous mode
    and receive packets, and check that testpmd is able to receive and forward packets
    successfully.
 
+Test Case: Set allmulticast mode
+--------------------------------
+
+1. If the testpmd application is not launched, run it as above command. Follow
+   below steps to check if allmulticast mode setting works well after reconfiguring
+   it while all ports are stopped.
+2. Run ``set promisc all off`` to disable promiscuous mode on all ports.
+3. Run ``set allmulti all off`` to disable allmulticast mode on all ports.
+4. Run ``start`` again to restart the forwarding.
+5. Send packets with dst same to port address.
+6. Check that testpmd is able to receive and forward packets successfully.
+7. Send packets with unicast dst not same to port address.
+8. Check that testpmd is NOT able to receive and forward packets successfully.
+9. Send packets with multicast dst ``01:00:00:33:00:01`` packets.
+10. Check that testpmd is NOT able to receive and forward packets successfully.
+11. Run ``set allmulti all on`` to enable allmulticast mode on all ports.
+12. Send packets with multicast dst ``01:00:00:33:00:01`` packets.
+13. Check that testpmd is able to receive and forward packets successfully.
+14. Send packets with unicast dst not same to port address.
+15. Check that testpmd is NOT able to receive and forward packets successfully.
+16. Run ``set promisc all on`` to enable promiscuous mode on all ports.
+17. Send packets with unicast dst not same to port address.
+18. Check that testpmd is able to receive and forward packets successfully.
+
 Test Case: Reconfigure All Ports With The Same Configurations (CRC)
 -------------------------------------------------------------------
 
-- 
2.7.5

Re: [dts] [PATCH] test_plan/shutdown_api: add allmulticast mode test plan

[Tu, Lijuan]

Applied, thanks

> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of Xueqin Lin
> Sent: Sunday, April 26, 2020 11:54 AM
> To: dts@dpdk.org
> Cc: Lin, Xueqin <xueqin.lin@intel.com>
> Subject: [dts] [PATCH] test_plan/shutdown_api: add allmulticast mode test
> plan
> 
> Signed-off-by: Xueqin Lin <xueqin.lin@intel.com>
> 
> ---
>  test_plans/shutdown_api_test_plan.rst | 24 ++++++++++++++++++++++++
>  1 file changed, 24 insertions(+)
> 
> diff --git a/test_plans/shutdown_api_test_plan.rst
> b/test_plans/shutdown_api_test_plan.rst
> index c2dd415..83a495a 100644
> --- a/test_plans/shutdown_api_test_plan.rst
> +++ b/test_plans/shutdown_api_test_plan.rst
> @@ -114,6 +114,30 @@ Test Case: Set promiscuous mode
>     and receive packets, and check that testpmd is able to receive and forward
> packets
>     successfully.
> 
> +Test Case: Set allmulticast mode
> +--------------------------------
> +
> +1. If the testpmd application is not launched, run it as above command.
> Follow
> +   below steps to check if allmulticast mode setting works well after
> reconfiguring
> +   it while all ports are stopped.
> +2. Run ``set promisc all off`` to disable promiscuous mode on all ports.
> +3. Run ``set allmulti all off`` to disable allmulticast mode on all ports.
> +4. Run ``start`` again to restart the forwarding.
> +5. Send packets with dst same to port address.
> +6. Check that testpmd is able to receive and forward packets successfully.
> +7. Send packets with unicast dst not same to port address.
> +8. Check that testpmd is NOT able to receive and forward packets
> successfully.
> +9. Send packets with multicast dst ``01:00:00:33:00:01`` packets.
> +10. Check that testpmd is NOT able to receive and forward packets
> successfully.
> +11. Run ``set allmulti all on`` to enable allmulticast mode on all ports.
> +12. Send packets with multicast dst ``01:00:00:33:00:01`` packets.
> +13. Check that testpmd is able to receive and forward packets successfully.
> +14. Send packets with unicast dst not same to port address.
> +15. Check that testpmd is NOT able to receive and forward packets
> successfully.
> +16. Run ``set promisc all on`` to enable promiscuous mode on all ports.
> +17. Send packets with unicast dst not same to port address.
> +18. Check that testpmd is able to receive and forward packets successfully.
> +
>  Test Case: Reconfigure All Ports With The Same Configurations (CRC)
>  -------------------------------------------------------------------
> 
> --
> 2.7.5