From: xizhan4x <xix.zhang@intel.com>
To: dts@dpdk.org
Cc: xizhan4x <xix.zhang@intel.com>
Subject: [dts] [PATCH V1] tests/TestSuite_shutdown_apitests:change dpdk pf create vf to kernel pf create vf
Date: Wed, 27 May 2020 17:06:05 +0800 [thread overview]
Message-ID: <1590570365-110634-1-git-send-email-xix.zhang@intel.com> (raw)
change dpdk pf create vf to kernel pf create vf and used ethtool Modify speed
Signed-off-by: xizhan4x <xix.zhang@intel.com>
---
tests/TestSuite_shutdown_api.py | 129 ++++++++++++++++----------------
1 file changed, 66 insertions(+), 63 deletions(-)
diff --git a/tests/TestSuite_shutdown_api.py b/tests/TestSuite_shutdown_api.py
index 3a29b9c..650ccfc 100644
--- a/tests/TestSuite_shutdown_api.py
+++ b/tests/TestSuite_shutdown_api.py
@@ -48,7 +48,7 @@ from exception import VerifyFailure
from qemu_kvm import QEMUKvm
from settings import get_nic_name
from random import randint
-
+from settings import DRIVERS
#
#
# Test class.
@@ -80,6 +80,18 @@ class TestShutdownApi(TestCase):
self.pmdout = PmdOutput(self.dut)
self.vm_env_done = False
+ def set_up(self):
+ """
+ Run before each test case.
+ """
+ if self._suite_result.test_case == "test_change_linkspeed_vf":
+ self.used_driver = self.dut.ports_info[0]["port"].get_nic_driver()
+ driver_name = DRIVERS.get(self.nic)
+ self.dut_ports = self.dut.get_ports(self.nic)
+ self.verify(len(self.dut_ports) >= 1, "Insufficient ports")
+ self.bind_nic_driver(self.dut_ports, driver=driver_name)
+ self.setup_vm_env(driver_name)
+
def get_stats(self, portid):
"""
Get packets number from port statistic.
@@ -188,11 +200,6 @@ class TestShutdownApi(TestCase):
else:
self.verify("Link detected: no" in out, "Wrong link status")
- def set_up(self):
- """
- Run before each test case.
- """
- pass
def check_linkspeed_config(self, configs):
ret_val = False
@@ -211,14 +218,12 @@ class TestShutdownApi(TestCase):
return ret_val
def check_vf_link_status(self):
- self.dut_testpmd.start_testpmd("Default", "--port-topology=chained")
self.vm0_testpmd.start_testpmd(VM_CORES_MASK, '--port-topology=chained')
- for i in range(10):
+ time.sleep(2)
+ for i in range(15):
out = self.vm0_testpmd.execute_cmd('show port info 0')
print(out)
if 'Link status: down' in out:
- self.dut_testpmd.execute_cmd('port stop all')
- self.dut_testpmd.execute_cmd('port start all')
time.sleep(2)
else :
break
@@ -239,7 +244,6 @@ class TestShutdownApi(TestCase):
driver = netdev.default_driver
if driver != driver_now:
netdev.bind_driver(driver=driver)
-
def setup_vm_env(self, driver='default'):
"""
Create testing environment with 1VF generated from 1PF
@@ -247,9 +251,6 @@ class TestShutdownApi(TestCase):
if self.vm_env_done:
return
- # initialize vm
- self.dut_ports = self.dut.get_ports(self.nic)
- self.verify(len(self.dut_ports) >= 1, "Insufficient ports")
self.vm0 = None
# set vf assign method and vf driver
@@ -263,12 +264,9 @@ class TestShutdownApi(TestCase):
self.vf_assign_method = 'vfio-pci'
self.dut.send_expect('modprobe vfio-pci', '#')
- self.dut.setup_modules_linux(self.target, 'igb_uio', '')
- self.bind_nic_driver(self.dut_ports[:1], driver="igb_uio")
self.used_dut_port = self.dut_ports[0]
tester_port = self.tester.get_local_port(self.used_dut_port)
self.tester_intf = self.tester.get_interface(tester_port)
-
self.dut.generate_sriov_vfs_by_port(
self.used_dut_port, 2, driver=driver)
self.sriov_vfs_port = self.dut.ports_info[
@@ -276,14 +274,11 @@ class TestShutdownApi(TestCase):
for port in self.sriov_vfs_port:
port.bind_driver(self.vf_driver)
time.sleep(1)
- self.dut_testpmd = PmdOutput(self.dut)
- self.dut_testpmd.start_testpmd(
- "Default", "--rxq=4 --txq=4 --port-topology=chained")
- self.dut_testpmd.execute_cmd("start")
- time.sleep(5)
vf0_prop = {'opt_host': self.sriov_vfs_port[0].pci}
-
+ self.host_intf = self.dut.ports_info[self.used_dut_port]['intf']
+ self.vf_mac = "00:01:23:45:67:89"
+ self.dut.send_expect("ip link set %s vf 0 mac %s" % (self.host_intf, self.vf_mac), "# ")
# set up VM0 ENV
self.vm0 = QEMUKvm(self.dut, 'vm0', 'shutdown_api')
self.vm0.set_vm_device(driver=self.vf_assign_method, **vf0_prop)
@@ -294,30 +289,35 @@ class TestShutdownApi(TestCase):
except Exception as e:
self.destroy_vm_env()
raise Exception(e)
-
self.vm0_dut_ports = self.vm0_dut.get_ports('any')
self.vm0_testpmd = PmdOutput(self.vm0_dut)
self.vm_env_done = True
- self.dut_testpmd.quit()
- self.bind_nic_driver(self.dut_ports[:1], driver=self.vf_driver)
+
def destroy_vm_env(self):
+ if getattr(self, 'used_dut_port', None) is not None:
+ self.dut.destroy_sriov_vfs_by_port(self.used_dut_port)
+ self.used_dut_port = None
+
+ for port in self.ports:
+ self.dut.send_expect("ethtool -s %s autoneg on " % self.dut.ports_info[port]["intf"], "#")
+
+ self.bind_nic_driver(self.dut_ports, driver=self.used_driver or self.drivername)
+
if not self.vm_env_done:
return
+
+ if getattr(self, 'self.vm0_testpmd', None):
+ self.vm0_testpmd.quit()
+
if getattr(self, 'vm0', None):
- self.vm0_dut.kill_all()
+ if getattr(self, 'vm0_dut', None):
+ self.vm0_dut.kill_all()
self.vm0_testpmd = None
self.vm0_dut_ports = None
# destroy vm0
self.vm0.stop()
- self.vm0 = None
-
- if getattr(self, 'used_dut_port', None):
- self.dut.destroy_sriov_vfs_by_port(self.used_dut_port)
- port = self.dut.ports_info[self.used_dut_port]['port']
- self.used_dut_port = None
-
self.vm_env_done = False
def test_stop_restart(self):
@@ -525,47 +525,53 @@ class TestShutdownApi(TestCase):
self.dut.send_expect("start", "testpmd> ")
self.check_forwarding()
self.dut.send_expect("stop", "testpmd> ")
-
def test_change_linkspeed_vf(self):
"""
Change Link Speed VF .
"""
- self.setup_vm_env()
self.check_vf_link_status()
out = self.tester.send_expect(
"ethtool %s" % self.tester.get_interface(self.tester.get_local_port(self.ports[0])), "# ", 100)
- self.verify("Supports auto-negotiation: Yes" in out, "Auto-negotiation not support.")
-
+ dut_out=self.dut.send_expect("ethtool %s" % self.dut.ports_info[0]["intf"], "# ", 100)
+ check_auto_negotiation="Supports auto-negotiation: Yes"
+ self.verify(check_auto_negotiation in out and check_auto_negotiation in dut_out , "tester or dut Auto-negotiation not support.")
result_scanner = r"([0-9]+)base\S*/([A-Za-z]+)"
scanner = re.compile(result_scanner, re.DOTALL)
- m = scanner.findall(out)
+ m = scanner.findall(dut_out)
configs = m[:-int(len(m) / 2)]
if not self.check_linkspeed_config(configs):
- return;
+ return
result_linkspeed_scanner = r"Link\s*speed:\s([0-9]+)\s*Mbps"
linkspeed_scanner = re.compile(result_linkspeed_scanner, re.DOTALL)
result_linktype_scanner = r"Link\s*duplex:\s*(\S*)\s*-\s*duplex"
linktype_scanner = re.compile(result_linktype_scanner, re.DOTALL)
-
+ tx_rx_packets = 3
+ self.vm0_testpmd.execute_cmd('set fwd mac', "testpmd> ", 30)
+ self.vm0_testpmd.execute_cmd('start')
for config in configs:
print(config)
- if self.nic in ["ironpond"]:
- if config[0] != '1000' or '10000':
- continue
- elif self.nic in ["sagepond"]:
- if config[0] != '1000' and '10000':
- continue
- self.dut.send_expect("port stop all", "testpmd> ", 100)
for port in self.ports:
- self.dut.send_expect("port config %d speed %s duplex %s" % (port,
- config[0], config[1].lower()), "testpmd> ")
- self.dut.send_expect("set fwd mac", "testpmd>")
- self.dut.send_expect("port start all", "testpmd> ", 100)
- time.sleep(8) # sleep few seconds for link stable
- # check changing VF link speed is supported or not.
+ if len(configs) != 1:
+ self.dut.send_expect(
+ "ethtool -s %s autoneg off speed %s duplex %s" % (self.dut.ports_info[port]["intf"],
+ config[0], config[1].lower()), "#")
+ time.sleep(5)
+ self.tester_itf_1 = self.tester.get_interface(port)
+ pkt = 'Ether(dst="%s", src="02:00:00:00:00:01")/IP()/UDP()/("X"*22)' % self.vf_mac
+ self.tester.scapy_append(
+ 'sendp([%s], iface="%s", count=%d)'
+ % (pkt, self.tester_intf, tx_rx_packets))
+ self.tester.scapy_execute()
+ time.sleep(2)
+ out = self.vm0_testpmd.execute_cmd('show port stats all')
+ self.verify("RX-packets: %d" % tx_rx_packets in out and "TX-packets: %d" % tx_rx_packets in out,
+ "VF Expected results: RX-packets: %d \n Actual results:%s " % (tx_rx_packets, out))
+ self.vm0_testpmd.execute_cmd('clear port stats all')
+ time.sleep(1)
+
out = self.vm0_testpmd.execute_cmd('show port info all')
linkspeed = linkspeed_scanner.findall(out)
@@ -575,12 +581,7 @@ class TestShutdownApi(TestCase):
"Wrong VF speed reported by the self.tester.")
self.verify(config[1].lower() == linktype[0].lower(),
"Wrong VF link type reported by the self.tester.")
- # quit vm
- self.vm0_testpmd.quit()
- self.dut_testpmd.quit()
- time.sleep(3)
- self.vm0_dut.kill_all()
- self.destroy_vm_env()
+
def test_enable_disablejumbo(self):
"""
@@ -818,8 +819,11 @@ class TestShutdownApi(TestCase):
"""
Run after each test case.
"""
+ if self._suite_result.test_case == "test_change_linkspeed_vf":
+ self.destroy_vm_env()
self.dut.kill_all()
- self.pmdout.start_testpmd("Default", "--portmask=%s --port-topology=loop" % utils.create_mask(self.ports), socket=self.ports_socket)
+ self.pmdout.start_testpmd("Default", "--portmask=%s --port-topology=loop" % utils.create_mask(self.ports),
+ socket=self.ports_socket)
ports_num = len(self.ports)
# link up test, to avoid failing further tests if link was down
for i in range(ports_num):
@@ -828,12 +832,11 @@ class TestShutdownApi(TestCase):
# start ports, to avodi failing further tests if ports are stoped
self.dut.send_expect("port start all", "testpmd> ", 100)
self.dut.send_expect("quit", "# ")
+
def tear_down_all(self):
"""
Run after each test suite.
"""
- if self.vm_env_done:
- self.destroy_vm_env()
self.dut.kill_all()
--
2.17.2
next reply other threads:[~2020-05-27 9:00 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-27 9:06 xizhan4x [this message]
2020-05-28 2:11 ` Zhang, XiX
2020-06-04 9:25 ` Fu, Qi
2020-06-11 12:22 ` Tu, Lijuan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1590570365-110634-1-git-send-email-xix.zhang@intel.com \
--to=xix.zhang@intel.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).