* [dts] [PATCH v1]test_plans: add xstats check on PF and VF
@ 2020-10-27 11:31 Peng Yuan
2020-11-03 2:30 ` Tu, Lijuan
0 siblings, 1 reply; 2+ messages in thread
From: Peng Yuan @ 2020-10-27 11:31 UTC (permalink / raw)
To: dts; +Cc: Peng Yuan
Add show port xstats rx-queue and tx-queue check on PF and VF pmd.
Signed-off-by: Peng Yuan <yuan.peng@intel.com>
diff --git a/test_plans/stats_checks_test_plan.rst b/test_plans/stats_checks_test_plan.rst
index b661ecf1..e571cb34 100644
--- a/test_plans/stats_checks_test_plan.rst
+++ b/test_plans/stats_checks_test_plan.rst
@@ -116,4 +116,167 @@ Send a packet with size 50 bytes (Single example port show) ::
############################################################################
-Verify that the increase in RX-bytes and RX-packets is as-expected, and no other information changed.
+Functional Tests of xstats Checks
+==================================
+
+Testing the support of xstatus Checks in Poll Mode Drivers consists of
+configuring the gathering the initial status of a port, sending some
+packets to that port, and checking the xstatus of the port.
+This case will compare the initial xstatus and the new xstatus,
+and compare the xstats and stats result.
+The fields checked are RX-packets and TX-packets of each queue stats,
+RX-packets, RX-bytes, TX-packets and TX-bytes of each port stats,
+rx_good_packets and rx_good_bytes of each port xstats,
+tx_good_packets and tx_good_bytes of each port xstats,
+rx_qx_packets, rx_qx_bytes, tx_qx_packets and tx_qx_bytes of each port xstats.
+
+Test Case: PF xstatus Checks
+============================
+1. Bind two PF ports to pmd driver::
+
+ ./usertools/dpdk-devbind.py -b vfio-pci device_bus_id0 device_bus_id1
+
+2. Launch testpmd and enable rss::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c f -n 4 -- -i --rxq=4 --txq=4
+ testpmd> port config all rss all
+ testpmd> set fwd mac
+
+3. show the xstats before packet forwarding, all the value are 0.
+4. Start forward and send 100 packets with random src IP address,
+ then stop forward.
+
+5. Check stats and xstats::
+
+ testpmd> stop
+ Telling cores to stop...
+ Waiting for lcores to finish...
+
+ ------- Forward Stats for RX Port= 0/Queue= 0 -> TX Port= 1/Queue= 0 -------
+ RX-packets: 29 TX-packets: 29 TX-dropped: 0
+
+ ------- Forward Stats for RX Port= 0/Queue= 1 -> TX Port= 1/Queue= 1 -------
+ RX-packets: 21 TX-packets: 21 TX-dropped: 0
+
+ ------- Forward Stats for RX Port= 0/Queue= 2 -> TX Port= 1/Queue= 2 -------
+ RX-packets: 24 TX-packets: 24 TX-dropped: 0
+
+ ------- Forward Stats for RX Port= 0/Queue= 3 -> TX Port= 1/Queue= 3 -------
+ RX-packets: 26 TX-packets: 26 TX-dropped: 0
+
+ ---------------------- Forward statistics for port 0 ----------------------
+ RX-packets: 100 RX-dropped: 0 RX-total: 100
+ TX-packets: 0 TX-dropped: 0 TX-total: 0
+ ----------------------------------------------------------------------------
+
+ ---------------------- Forward statistics for port 1 ----------------------
+ RX-packets: 0 RX-dropped: 0 RX-total: 0
+ TX-packets: 100 TX-dropped: 0 TX-total: 100
+ ----------------------------------------------------------------------------
+
+ +++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
+ RX-packets: 100 RX-dropped: 0 RX-total: 100
+ TX-packets: 100 TX-dropped: 0 TX-total: 100
+ ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+
+ testpmd> show port stats all
+
+ ######################## NIC statistics for port 0 ########################
+ RX-packets: 100 RX-missed: 0 RX-bytes: 6000
+ RX-errors: 0
+ RX-nombuf: 0
+ TX-packets: 0 TX-errors: 0 TX-bytes: 0
+
+ Throughput (since last show)
+ Rx-pps: 0 Rx-bps: 0
+ Tx-pps: 0 Tx-bps: 0
+ ############################################################################
+
+ ######################## NIC statistics for port 1 ########################
+ RX-packets: 0 RX-missed: 0 RX-bytes: 0
+ RX-errors: 0
+ RX-nombuf: 0
+ TX-packets: 100 TX-errors: 0 TX-bytes: 6000
+
+ Throughput (since last show)
+ Rx-pps: 0 Rx-bps: 0
+ Tx-pps: 0 Tx-bps: 0
+ ############################################################################
+
+ testpmd> show port xstats all
+ ###### NIC extended statistics for port 0
+ rx_good_packets: 100
+ tx_good_packets: 0
+ rx_good_bytes: 6000
+ tx_good_bytes: 0
+ ......
+ rx_q0_packets: 29
+ rx_q0_bytes: 1740
+ rx_q0_errors: 0
+ rx_q1_packets: 21
+ rx_q1_bytes: 1260
+ rx_q1_errors: 0
+ rx_q2_packets: 24
+ rx_q2_bytes: 1440
+ rx_q2_errors: 0
+ rx_q3_packets: 26
+ rx_q3_bytes: 1560
+ rx_q3_errors: 0
+ tx_q0_packets: 0
+ tx_q0_bytes: 0
+ tx_q1_packets: 0
+ tx_q1_bytes: 0
+ tx_q2_packets: 0
+ tx_q2_bytes: 0
+ tx_q3_packets: 0
+ tx_q3_bytes: 0
+ ......
+ ###### NIC extended statistics for port 1
+ rx_good_packets: 0
+ tx_good_packets: 100
+ rx_good_bytes: 0
+ tx_good_bytes: 6000
+ rx_q0_packets: 0
+ rx_q0_bytes: 0
+ rx_q0_errors: 0
+ rx_q1_packets: 0
+ rx_q1_bytes: 0
+ rx_q1_errors: 0
+ rx_q2_packets: 0
+ rx_q2_bytes: 0
+ rx_q2_errors: 0
+ rx_q3_packets: 0
+ rx_q3_bytes: 0
+ rx_q3_errors: 0
+ tx_q0_packets: 29
+ tx_q0_bytes: 1740
+ tx_q1_packets: 21
+ tx_q1_bytes: 1260
+ tx_q2_packets: 24
+ tx_q2_bytes: 1440
+ tx_q3_packets: 26
+ tx_q3_bytes: 1560
+
+verify rx_good_packets, RX-packets of port 0 and tx_good_packets, TX-packets of port 1 are both 100.
+rx_good_bytes, RX-bytes of port 0 and tx_good_bytes, TX-bytes of port 1 are the same.
+RX-packets of each queue of port 0 are equal to rx_qx_packets of each queue of port 0.
+TX-packets of each queue of port 1 are equal to tx_qx_packets of each queue of port 1.
+The sum of rx_qx_bytes of each queue of port 0 is equal to the rx_good_packets of port 0.
+The sum of tx_qx_bytes of each queue of port 1 is equal to the tx_good_packets of port 1.
+
+Test Case: VF xstats Checks
+============================
+1. Create one VF port on a kernel PF, then bind the VF to pmd driver::
+
+ echo 1 > /sys/bus/pci/devices/device_bus_id/sriov_numvfs
+ ./usertools/dpdk-devbind.py -s
+ ./usertools/dpdk-devbind.py -b vfio-pci vf_bus_id
+
+2. Launch testpmd on the VF and enable RSS::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c f -n 4 -- -i --rxq=4 --txq=4
+ testpmd> port config all rss all
+ testpmd> set fwd mac
+
+3. Then run the same steps of PF xstats Checks, get same result.
+note: because one port forwarding packets, so check rx and tx both in port 0.
--
2.17.1
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2020-11-03 2:31 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-10-27 11:31 [dts] [PATCH v1]test_plans: add xstats check on PF and VF Peng Yuan
2020-11-03 2:30 ` Tu, Lijuan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).