From: Xiang An <xiangx.an@intel.com>
To: dts@dpdk.org
Cc: xueqin.lin@intel.com, Xiang An <xiangx.an@intel.com>
Subject: [dts] [PATCH V1 1/2] test_plans/dynamic_flowtype: remove a cmd to adapt dpdk
Date: Wed, 2 Jun 2021 16:01:58 +0800 [thread overview]
Message-ID: <1622620919-59787-2-git-send-email-xiangx.an@intel.com> (raw)
In-Reply-To: <1622620919-59787-1-git-send-email-xiangx.an@intel.com>
Signed-off-by: Xiang An <xiangx.an@intel.com>
---
test_plans/dynamic_flowtype_test_plan.rst | 48 +++++++++++--------------------
1 file changed, 16 insertions(+), 32 deletions(-)
diff --git a/test_plans/dynamic_flowtype_test_plan.rst b/test_plans/dynamic_flowtype_test_plan.rst
index 83ed5eb..ad68536 100644
--- a/test_plans/dynamic_flowtype_test_plan.rst
+++ b/test_plans/dynamic_flowtype_test_plan.rst
@@ -176,22 +176,18 @@ Test Case: Update flow type to GTP-U IPv4 pctype mapping item
testpmd> show port 0 pctype mapping
-4. Add udp key to hash input set for flow type id 26 on port 0::
-
- testpmd> set_hash_input_set 0 26 udp-key add
-
-5. Enable flow type id 26's RSS::
+4. Enable flow type id 26's RSS::
testpmd> port config all rss 26
-6. Start testpmd
+5. Start testpmd
-7. Send GTP-U IPv4 packets, check RSS could work, print PKT_RX_RSS_HASH::
+6. Send GTP-U IPv4 packets, check RSS could work, print PKT_RX_RSS_HASH::
>>> p=Ether()/IP()/UDP(dport=2152)/GTP_U_Header()/IP()/Raw('x'*20)
>>> p=Ether()/IPv6()/UDP(dport=2152)/GTP_U_Header()/IP()/Raw('x'*20)
-8. Send GTP-U IPv6, GTP-U PAY4 and GTP-C PAY4 packets, check receive packets
+7. Send GTP-U IPv6, GTP-U PAY4 and GTP-C PAY4 packets, check receive packets
from queue 0 and don't have PKT_RX_RSS_HASH print.
@@ -209,22 +205,18 @@ Test Case: Update flow type to GTP-U IPv6 pctype mapping item
testpmd> show port 0 pctype mapping
-4. Add udp key to hash input set for flow type id 23 on port 0::
-
- testpmd> set_hash_input_set 0 23 udp-key add
-
-5. Enable flow type id 23's RSS::
+4. Enable flow type id 23's RSS::
testpmd> port config all rss 23
-6. Start testpmd
+5. Start testpmd
-7. Send GTP-U IPv6 packets, check RSS could work, print PKT_RX_RSS_HASH::
+6. Send GTP-U IPv6 packets, check RSS could work, print PKT_RX_RSS_HASH::
>>> p=Ether()/IP()/UDP(dport=2152)/GTP_U_Header()/IPv6()/Raw('x'*20)
>>> p=Ether()/IPv6()/UDP(dport=2152)/GTP_U_Header()/IPv6()/Raw('x'*20)
-8. Send GTP-U IPv4, GTP-U PAY4 and GTP-C PAY4 packets, check receive
+7. Send GTP-U IPv4, GTP-U PAY4 and GTP-C PAY4 packets, check receive
packets from queue 0 and don't have PKT_RX_RSS_HASH print
@@ -243,22 +235,18 @@ Test Case: Update flow type to GTP-U PAY4 pctype mapping item
testpmd> show port 0 pctype mapping
-4. Add udp key to hash input set for flow type id 24 on port 0::
-
- testpmd> set_hash_input_set 0 24 udp-key add
-
-5. Enable flow type id 24's RSS::
+4. Enable flow type id 24's RSS::
testpmd> port config all rss 24
-6. Start testpmd
+5. Start testpmd
-7. Send GTP-U, PAY4 packets, check RSS could work, print PKT_RX_RSS_HASH::
+6. Send GTP-U, PAY4 packets, check RSS could work, print PKT_RX_RSS_HASH::
>>> p=Ether()/IP()/UDP(dport=2152)/GTP_U_Header()/Raw('x'*20)
>>> p=Ether()/IPv6()/UDP(dport=2152)/GTP_U_Header()/Raw('x'*20)
-8. Send GTP-U IPv4, GTP-U IPv6 and GTP-C PAY4 packets, check receive
+7. Send GTP-U IPv4, GTP-U IPv6 and GTP-C PAY4 packets, check receive
packets from queue 0 and don't have PKT_RX_RSS_HASH print.
@@ -274,22 +262,18 @@ Test Case: Update flow type to GTP-C PAY4 pctype mapping item
3. Check flow ptype to pctype mapping adds 25 this mapping
-4. Add udp key to hash input set for flow type id 25 on port 0::
-
- testpmd> set_hash_input_set 0 25 udp-key add
-
-5. Enable flow type id 25's RSS::
+4. Enable flow type id 25's RSS::
testpmd> port config all rss 25
-6. Start testpmd
+5. Start testpmd
-7. Send GTP-C PAY4 packets, check RSS could work, print PKT_RX_RSS_HASH::
+6. Send GTP-C PAY4 packets, check RSS could work, print PKT_RX_RSS_HASH::
>>> p=Ether()/IP()/UDP(dport=2123)/GTP_U_Header()/Raw('x'*20)
>>> p=Ether()/IPv6()/UDP(dport=2123)/GTP_U_Header()/Raw('x'*20)
-8. Send GTP-U IPv4, GTP-U IPv6 and GTP-U PAY4 packets, check receive packets
+7. Send GTP-U IPv4, GTP-U IPv6 and GTP-U PAY4 packets, check receive packets
from queue 0 and don't have PKT_RX_RSS_HASH print.
--
1.8.3.1
next prev parent reply other threads:[~2021-06-02 7:51 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-02 8:01 [dts] [PATCH V1 0/2] dynamic_flowtype: " Xiang An
2021-06-02 8:01 ` Xiang An [this message]
2021-06-07 8:53 ` [dts] [PATCH V1 1/2] test_plans/dynamic_flowtype: " Lin, Xueqin
2021-06-02 8:01 ` [dts] [PATCH V1 2/2] tests/dynamic_flowtype: " Xiang An
2021-06-07 8:53 ` Lin, Xueqin
2021-06-09 7:12 ` [dts] [PATCH V1 0/2] dynamic_flowtype: " Tu, Lijuan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1622620919-59787-2-git-send-email-xiangx.an@intel.com \
--to=xiangx.an@intel.com \
--cc=dts@dpdk.org \
--cc=xueqin.lin@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).