* [dts] [PATCH V1] test_plan/tests: replace eal allowlist option
@ 2021-09-30 3:44 Jiale Song
0 siblings, 0 replies; only message in thread
From: Jiale Song @ 2021-09-30 3:44 UTC (permalink / raw)
To: dts; +Cc: Jiale Song
because dpdk no longer supports the eal parameter '-w', replace eal '-w' option with '-a'
Signed-off-by: Jiale Song <songx.jiale@intel.com>
---
| 2 +-
| 2 +-
| 2 +-
| 4 ++--
| 4 ++--
test_plans/cvl_dcf_acl_filter_test_plan.rst | 20 ++++++++--------
test_plans/cvl_dcf_date_path_test_plan.rst | 2 +-
.../cvl_dcf_switch_filter_pppoe_test_plan.rst | 2 +-
.../cvl_dcf_switch_filter_test_plan.rst | 10 ++++----
test_plans/cvl_fdir_test_plan.rst | 4 ++--
test_plans/cvl_limit_value_test_test_plan.rst | 18 +++++++-------
.../cvl_switch_filter_pppoe_test_plan.rst | 4 ++--
test_plans/cvl_switch_filter_test_plan.rst | 4 ++--
...ckage_download_in_ice_driver_test_plan.rst | 4 ++--
test_plans/flexible_rxd_test_plan.rst | 24 +++++++++----------
.../iavf_flexible_descriptor_test_plan.rst | 22 ++++++++---------
..._package_driver_error_handle_test_plan.rst | 2 +-
test_plans/l2tp_esp_coverage_test_plan.rst | 12 +++++-----
| 2 +-
| 2 +-
| 2 +-
| 2 +-
| 2 +-
tests/TestSuite_cvl_fdir.py | 4 ++--
| 2 +-
tests/TestSuite_cvl_qinq.py | 2 +-
...e_enable_package_download_in_ice_driver.py | 4 ++--
...tSuite_iavf_package_driver_error_handle.py | 2 +-
tests/TestSuite_l2tp_esp_coverage.py | 2 +-
29 files changed, 84 insertions(+), 84 deletions(-)
mode change 100644 => 100755 test_plans/cvl_advanced_iavf_rss_gtpu_test_plan.rst
mode change 100644 => 100755 test_plans/cvl_advanced_iavf_rss_test_plan.rst
mode change 100644 => 100755 test_plans/cvl_advanced_iavf_rss_vlan_esp_ah_l2tp_pfcp_test_plan.rst
mode change 100644 => 100755 test_plans/cvl_advanced_rss_pppoe_test_plan.rst
mode change 100644 => 100755 test_plans/cvl_advanced_rss_vlan_esp_ah_l2tp_pfcp_test_plan.rst
mode change 100644 => 100755 test_plans/cvl_dcf_acl_filter_test_plan.rst
mode change 100644 => 100755 test_plans/cvl_dcf_switch_filter_pppoe_test_plan.rst
mode change 100644 => 100755 test_plans/cvl_dcf_switch_filter_test_plan.rst
mode change 100644 => 100755 test_plans/cvl_fdir_test_plan.rst
mode change 100644 => 100755 test_plans/cvl_limit_value_test_test_plan.rst
mode change 100644 => 100755 test_plans/cvl_switch_filter_pppoe_test_plan.rst
mode change 100644 => 100755 test_plans/cvl_switch_filter_test_plan.rst
mode change 100644 => 100755 test_plans/enable_package_download_in_ice_driver_test_plan.rst
mode change 100644 => 100755 test_plans/flexible_rxd_test_plan.rst
mode change 100644 => 100755 test_plans/iavf_flexible_descriptor_test_plan.rst
mode change 100644 => 100755 test_plans/iavf_package_driver_error_handle_test_plan.rst
mode change 100644 => 100755 test_plans/l2tp_esp_coverage_test_plan.rst
mode change 100644 => 100755 tests/TestSuite_cvl_advanced_iavf_rss_gtpu.py
mode change 100644 => 100755 tests/TestSuite_cvl_advanced_rss.py
mode change 100644 => 100755 tests/TestSuite_cvl_advanced_rss_pppoe.py
mode change 100644 => 100755 tests/TestSuite_cvl_advanced_rss_vlan_esp_ah_l2tp_pfcp.py
mode change 100644 => 100755 tests/TestSuite_cvl_fdir.py
mode change 100644 => 100755 tests/TestSuite_cvl_qinq.py
mode change 100644 => 100755 tests/TestSuite_enable_package_download_in_ice_driver.py
mode change 100644 => 100755 tests/TestSuite_iavf_package_driver_error_handle.py
mode change 100644 => 100755 tests/TestSuite_l2tp_esp_coverage.py
--git a/test_plans/cvl_advanced_iavf_rss_gtpu_test_plan.rst b/test_plans/cvl_advanced_iavf_rss_gtpu_test_plan.rst
old mode 100644
new mode 100755
index 909c7221..7d99f775
--- a/test_plans/cvl_advanced_iavf_rss_gtpu_test_plan.rst
+++ b/test_plans/cvl_advanced_iavf_rss_gtpu_test_plan.rst
@@ -213,7 +213,7 @@ Prerequisites
5. Launch the testpmd to configuration queue of rx and tx number 16 in DUT::
- testpmd>./x86_64-native-linuxapp-gcc/app/testpmd -c 0xff -n 4 -w 0000:18:01.0 -- -i --rxq=16 --txq=16
+ testpmd>./x86_64-native-linuxapp-gcc/app/testpmd -c 0xff -n 4 -a 0000:18:01.0 -- -i --rxq=16 --txq=16
testpmd>set fwd rxonly
testpmd>set verbose 1
--git a/test_plans/cvl_advanced_iavf_rss_test_plan.rst b/test_plans/cvl_advanced_iavf_rss_test_plan.rst
old mode 100644
new mode 100755
index 27c8792f..0e0a8104
--- a/test_plans/cvl_advanced_iavf_rss_test_plan.rst
+++ b/test_plans/cvl_advanced_iavf_rss_test_plan.rst
@@ -349,7 +349,7 @@ Prerequisites
5. Launch the testpmd to configuration queue of rx and tx number 16 in DUT::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xff -n 4 -w 0000:18:01.0 -- -i --rxq=16 --txq=16
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xff -n 4 -a 0000:18:01.0 -- -i --rxq=16 --txq=16
testpmd>set fwd rxonly
testpmd>set verbose 1
--git a/test_plans/cvl_advanced_iavf_rss_vlan_esp_ah_l2tp_pfcp_test_plan.rst b/test_plans/cvl_advanced_iavf_rss_vlan_esp_ah_l2tp_pfcp_test_plan.rst
old mode 100644
new mode 100755
index b1209868..b9229f19
--- a/test_plans/cvl_advanced_iavf_rss_vlan_esp_ah_l2tp_pfcp_test_plan.rst
+++ b/test_plans/cvl_advanced_iavf_rss_vlan_esp_ah_l2tp_pfcp_test_plan.rst
@@ -119,7 +119,7 @@ Prerequisites
6. Launch the testpmd to configuration queue of rx and tx number 16 in DUT::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xff -n 4 -w 0000:18:01.0 -- -i --rxq=16 --txq=16
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xff -n 4 -a 0000:18:01.0 -- -i --rxq=16 --txq=16
testpmd>set fwd rxonly
testpmd>set verbose 1
--git a/test_plans/cvl_advanced_rss_pppoe_test_plan.rst b/test_plans/cvl_advanced_rss_pppoe_test_plan.rst
old mode 100644
new mode 100755
index e209e0d4..829a94d2
--- a/test_plans/cvl_advanced_rss_pppoe_test_plan.rst
+++ b/test_plans/cvl_advanced_rss_pppoe_test_plan.rst
@@ -125,7 +125,7 @@ Prerequisites
5. Launch the testpmd in DUT for cases with toeplitz hash function::
- ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xf -n 4 -w 0000:18:00.0 -- -i --rxq=16 --txq=16 --disable-rss
+ ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xf -n 4 -a 0000:18:00.0 -- -i --rxq=16 --txq=16 --disable-rss
testpmd> port config 0 rss-hash-key ipv4 1b9d58a4b961d9cd1c56ad1621c3ad51632c16a5d16c21c3513d132c135d132c13ad1531c23a51d6ac49879c499d798a7d949c8a
testpmd> set fwd rxonly
testpmd> set verbose 1
@@ -133,7 +133,7 @@ Prerequisites
Launch testpmd for cases with symmetric_toeplitz and simple_xor hash function::
- ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xf -n 4 -w 0000:18:00.0 -- -i --rxq=16 --txq=16
+ ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xf -n 4 -a 0000:18:00.0 -- -i --rxq=16 --txq=16
6. on tester side, copy the layer python file to /root::
--git a/test_plans/cvl_advanced_rss_vlan_esp_ah_l2tp_pfcp_test_plan.rst b/test_plans/cvl_advanced_rss_vlan_esp_ah_l2tp_pfcp_test_plan.rst
old mode 100644
new mode 100755
index a0c232d9..bc2db466
--- a/test_plans/cvl_advanced_rss_vlan_esp_ah_l2tp_pfcp_test_plan.rst
+++ b/test_plans/cvl_advanced_rss_vlan_esp_ah_l2tp_pfcp_test_plan.rst
@@ -116,7 +116,7 @@ Prerequisites
5. Launch the testpmd in DUT for cases with toeplitz hash function::
- ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xf -n 4 -w 0000:18:00.0 -- -i --rxq=16 --txq=16 --disable-rss
+ ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xf -n 4 -a 0000:18:00.0 -- -i --rxq=16 --txq=16 --disable-rss
testpmd> port config 0 rss-hash-key ipv4 1b9d58a4b961d9cd1c56ad1621c3ad51632c16a5d16c21c3513d132c135d132c13ad1531c23a51d6ac49879c499d798a7d949c8a
testpmd> set fwd rxonly
testpmd> set verbose 1
@@ -124,7 +124,7 @@ Prerequisites
Launch testpmd for cases with symmetric_toeplitz and simple_xor hash function::
- ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xf -n 4 -w 0000:18:00.0 -- -i --rxq=16 --txq=16
+ ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xf -n 4 -a 0000:18:00.0 -- -i --rxq=16 --txq=16
6. on tester side, copy the layer python file to /root::
diff --git a/test_plans/cvl_dcf_acl_filter_test_plan.rst b/test_plans/cvl_dcf_acl_filter_test_plan.rst
old mode 100644
new mode 100755
index 378514dd..c74dcb68
--- a/test_plans/cvl_dcf_acl_filter_test_plan.rst
+++ b/test_plans/cvl_dcf_acl_filter_test_plan.rst
@@ -95,7 +95,7 @@ Prerequisites
9. Launch dpdk on VF0, and VF0 request DCF mode::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xf -n 4 -w 0000:86:01.0,cap=dcf --file-prefix=vf0 --log-level="ice,7" -- -i
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xf -n 4 -a 0000:86:01.0,cap=dcf --file-prefix=vf0 --log-level="ice,7" -- -i
testpmd> set fwd mac
testpmd> set verbose 1
testpmd> start
@@ -106,7 +106,7 @@ Prerequisites
10. Launch dpdk on VF1::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xf0 -n 4 -w 86:01.1 --file-prefix=vf1 -- -i
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xf0 -n 4 -a 86:01.1 --file-prefix=vf1 -- -i
testpmd> set fwd rxonly
testpmd> set verbose 1
testpmd> start
@@ -118,7 +118,7 @@ Prerequisites
or launch one testpmd on VF0 and VF1::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xf -n 4 -w 0000:86:01.0,cap=dcf -w 86:01.1 --file-prefix=vf0 --log-level="ice,7" -- -i
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xf -n 4 -a 0000:86:01.0,cap=dcf -a 86:01.1 --file-prefix=vf0 --log-level="ice,7" -- -i
Common steps of basic cases
===========================
@@ -516,11 +516,11 @@ while we can create 256 ipv4-udp/ipv4-tcp/ipv4-sctp rules at most.
1. launch DPDK on VF0, request DCF mode::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xc -n 4 -w 86:01.0,cap=dcf -- -i --port-topology=loop
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xc -n 4 -a 86:01.0,cap=dcf -- -i --port-topology=loop
Launch dpdk on VF1::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xf0 -n 4 -w 86:01.1 --file-prefix=vf1 -- -i
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xf0 -n 4 -a 86:01.1 --file-prefix=vf1 -- -i
2. create a full mask rule, it's created as a switch rule::
@@ -592,11 +592,11 @@ Test Case 6: max entry number ipv4-other
========================================
1. launch DPDK on VF0, request DCF mode::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xc -n 4 -w 86:01.0,cap=dcf -- -i --port-topology=loop
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xc -n 4 -a 86:01.0,cap=dcf -- -i --port-topology=loop
Launch dpdk on VF1::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xf0 -n 4 -w 86:01.1 --file-prefix=vf1 -- -i
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xf0 -n 4 -a 86:01.1 --file-prefix=vf1 -- -i
2. create a full mask rule, it's created as a switch rule::
@@ -669,11 +669,11 @@ Test Case 7: max entry number combined patterns
===============================================
1. launch DPDK on VF0, request DCF mode::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xc -n 4 -w 86:01.0,cap=dcf -- -i --port-topology=loop
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xc -n 4 -a 86:01.0,cap=dcf -- -i --port-topology=loop
Launch dpdk on VF1::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xf0 -n 4 -w 86:01.1 --file-prefix=vf1 -- -i
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xf0 -n 4 -a 86:01.1 --file-prefix=vf1 -- -i
2. create 32 ipv4-other ACL rules::
@@ -912,7 +912,7 @@ Test Case 11: switch/acl/fdir/rss rules combination
===================================================
1. launch testpmd::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xc -n 4 -w 86:01.0,cap=dcf -w 86:01.1 --log-level="ice,7" -- -i --port-topology=loop --rxq=4 --txq=4
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xc -n 4 -a 86:01.0,cap=dcf -a 86:01.1 --log-level="ice,7" -- -i --port-topology=loop --rxq=4 --txq=4
2. create rules::
diff --git a/test_plans/cvl_dcf_date_path_test_plan.rst b/test_plans/cvl_dcf_date_path_test_plan.rst
index 380090f9..5ce0cc64 100755
--- a/test_plans/cvl_dcf_date_path_test_plan.rst
+++ b/test_plans/cvl_dcf_date_path_test_plan.rst
@@ -17,7 +17,7 @@ Set a VF as trust ::
Launch dpdk on the VF, request DCF mode ::
./usertools/dpdk-devbind.py -b vfio-pci 18:01.0
- ./x86_64-native-linuxapp-gcc/app/testpmd -l 6-10 -n 4 -w 18:01.0,cap=dcf --file-prefix=vf -- -i
+ ./x86_64-native-linuxapp-gcc/app/testpmd -l 6-10 -n 4 -a 18:01.0,cap=dcf --file-prefix=vf -- -i
Test Case: Launch DCF and do macfwd
diff --git a/test_plans/cvl_dcf_switch_filter_pppoe_test_plan.rst b/test_plans/cvl_dcf_switch_filter_pppoe_test_plan.rst
old mode 100644
new mode 100755
index 0149b464..d781f737
--- a/test_plans/cvl_dcf_switch_filter_pppoe_test_plan.rst
+++ b/test_plans/cvl_dcf_switch_filter_pppoe_test_plan.rst
@@ -201,7 +201,7 @@ Prerequisites
9. Launch dpdk on VF0 and VF1, and VF0 request DCF mode::
- ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xf -n 4 -w 0000:18:01.0,cap=dcf -w 0000:18:01.1 -- -i
+ ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xf -n 4 -a 0000:18:01.0,cap=dcf -a 0000:18:01.1 -- -i
testpmd> set portlist 1
testpmd> set fwd rxonly
testpmd> set verbose 1
diff --git a/test_plans/cvl_dcf_switch_filter_test_plan.rst b/test_plans/cvl_dcf_switch_filter_test_plan.rst
old mode 100644
new mode 100755
index 116b2cca..76857e4e
--- a/test_plans/cvl_dcf_switch_filter_test_plan.rst
+++ b/test_plans/cvl_dcf_switch_filter_test_plan.rst
@@ -231,7 +231,7 @@ Prerequisites
9. Launch dpdk on VF0 and VF1, and VF0 request DCF mode::
- ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xf -n 4 -w 0000:18:01.0,cap=dcf -w 0000:18:01.1 -- -i
+ ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xf -n 4 -a 0000:18:01.0,cap=dcf -a 0000:18:01.1 -- -i
testpmd> set portlist 1
testpmd> set fwd rxonly
testpmd> set verbose 1
@@ -2392,7 +2392,7 @@ Subcase 1: add existing rules but with different vfs
1. Launch dpdk on VF0, VF1 and VF2, and VF0 request DCF mode::
- ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xf -n 4 -w 0000:18:01.0,cap=dcf -w 0000:18:01.1 -w 0000:18:01.2 -- -i
+ ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xf -n 4 -a 0000:18:01.0,cap=dcf -a 0000:18:01.1 -a 0000:18:01.2 -- -i
testpmd> set portlist 1,2
testpmd> set fwd rxonly
testpmd> set verbose 1
@@ -2454,7 +2454,7 @@ Subcase 3: add two rules with one rule's input set included in the other
1. Launch dpdk on VF0, VF1 and VF2, and VF0 request DCF mode::
- ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xf -n 4 -w 0000:18:01.0,cap=dcf -w 0000:18:01.1 -w 0000:18:01.2 -- -i
+ ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xf -n 4 -a 0000:18:01.0,cap=dcf -a 0000:18:01.1 -a 0000:18:01.2 -- -i
testpmd> set portlist 1,2
testpmd> set fwd rxonly
testpmd> set verbose 1
@@ -2617,7 +2617,7 @@ are dropped.
1. Launch dpdk on VF0, VF1 and VF2, and VF0 request DCF mode::
- ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xf -n 4 -w 0000:18:01.0,cap=dcf -w 0000:18:01.1 -w 0000:18:01.2 -- -i
+ ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xf -n 4 -a 0000:18:01.0,cap=dcf -a 0000:18:01.1 -a 0000:18:01.2 -- -i
testpmd> set portlist 1,2
testpmd> set fwd mac
testpmd> set verbose 1
@@ -2688,7 +2688,7 @@ This case is designed based on 4*25G NIC.
6. launch dpdk on VF0, and request DCF mode::
- ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xf -n 4 -w 0000:18:01.0,cap=dcf -- -i
+ ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xf -n 4 -a 0000:18:01.0,cap=dcf -- -i
7. set a switch rule to each VF from DCF, totally 63 rules::
diff --git a/test_plans/cvl_fdir_test_plan.rst b/test_plans/cvl_fdir_test_plan.rst
old mode 100644
new mode 100755
index 24586016..64d06f1b
--- a/test_plans/cvl_fdir_test_plan.rst
+++ b/test_plans/cvl_fdir_test_plan.rst
@@ -145,7 +145,7 @@ Prerequisites
5. Launch the app ``testpmd`` with the following arguments::
- ./testpmd -c 0xff -n 6 -w 86:00.0 --log-level="ice,7" -- -i --portmask=0xff --rxq=64 --txq=64 --port-topology=loop
+ ./testpmd -c 0xff -n 6 -a 86:00.0 --log-level="ice,7" -- -i --portmask=0xff --rxq=64 --txq=64 --port-topology=loop
testpmd> set fwd rxonly
testpmd> set verbose 1
@@ -156,7 +156,7 @@ Prerequisites
Notes: if need two ports environment, launch ``testpmd`` with the following arguments::
- ./testpmd -c 0xff -n 6 -w 86:00.0 -w 86:00.1 --log-level="ice,7" -- -i --portmask=0xff --rxq=64 --txq=64 --port-topology=loop
+ ./testpmd -c 0xff -n 6 -a 86:00.0 -a 86:00.1 --log-level="ice,7" -- -i --portmask=0xff --rxq=64 --txq=64 --port-topology=loop
Default parameters
------------------
diff --git a/test_plans/cvl_limit_value_test_test_plan.rst b/test_plans/cvl_limit_value_test_test_plan.rst
old mode 100644
new mode 100755
index 9fec36f2..160b126e
--- a/test_plans/cvl_limit_value_test_test_plan.rst
+++ b/test_plans/cvl_limit_value_test_test_plan.rst
@@ -91,7 +91,7 @@ Prerequisites
5. Launch the app ``testpmd`` with the following arguments::
- ./testpmd -c 0xff -n 6 -w 86:01.0 -w 86:01.1 --file-prefix=vf -- -i --rxq=16 --txq=16
+ ./testpmd -c 0xff -n 6 -a 86:01.0 -a 86:01.1 --file-prefix=vf -- -i --rxq=16 --txq=16
testpmd> set fwd rxonly
testpmd> set verbose 1
@@ -159,7 +159,7 @@ if 2 vfs generated by 2 pf port, each vf can create 14336 rules at most.
1. start testpmd on vf00::
- ./testpmd -c 0xf -n 6 -w 86:01.0 --file-prefix=vf00 -- -i --rxq=4 --txq=4
+ ./testpmd -c 0xf -n 6 -a 86:01.0 --file-prefix=vf00 -- -i --rxq=4 --txq=4
create 1 rule on vf00::
@@ -169,7 +169,7 @@ if 2 vfs generated by 2 pf port, each vf can create 14336 rules at most.
2. start testpmd on vf10::
- ./testpmd -c 0xf0 -n 6 -w 86:0a.0 --file-prefix=vf10 -- -i --rxq=4 --txq=4
+ ./testpmd -c 0xf0 -n 6 -a 86:0a.0 --file-prefix=vf10 -- -i --rxq=4 --txq=4
create 14336 rules on vf10::
@@ -218,7 +218,7 @@ this card can create (2048 + 14336)*2=32768 rules.
2. start testpmd on vf00::
- ./testpmd -c 0xf -n 6 -w 86:01.0 --file-prefix=vf00 -- -i --rxq=4 --txq=4
+ ./testpmd -c 0xf -n 6 -a 86:01.0 --file-prefix=vf00 -- -i --rxq=4 --txq=4
create 1 rule on vf00::
@@ -228,7 +228,7 @@ this card can create (2048 + 14336)*2=32768 rules.
2. start testpmd on vf10::
- ./testpmd -c 0xf0 -n 6 -w 86:0a.0 --file-prefix=vf10 -- -i --rxq=4 --txq=4
+ ./testpmd -c 0xf0 -n 6 -a 86:0a.0 --file-prefix=vf10 -- -i --rxq=4 --txq=4
create 14335 rules on vf10::
@@ -289,7 +289,7 @@ so if create 16384 rules on pf1,check failed to create rule on vf00 and vf10(vf0
3. start testpmd on vf00 and vf10::
- ./testpmd -c 0xf -n 6 -w 86:01.0 -w 86:11.0 --file-prefix=vf00 -- -i --rxq=4 --txq=4
+ ./testpmd -c 0xf -n 6 -a 86:01.0 -a 86:11.0 --file-prefix=vf00 -- -i --rxq=4 --txq=4
create 1 rule on vf00::
@@ -435,7 +435,7 @@ Prerequisites
5. Launch the app ``testpmd`` with the following arguments::
- ./testpmd -c 0xff -n 6 -w 86:00.0 --log-level="ice,7" -- -i --portmask=0xff --rxq=64 --txq=64 --port-topology=loop
+ ./testpmd -c 0xff -n 6 -a 86:00.0 --log-level="ice,7" -- -i --portmask=0xff --rxq=64 --txq=64 --port-topology=loop
testpmd> set fwd rxonly
testpmd> set verbose 1
@@ -446,7 +446,7 @@ Prerequisites
Notes: if need two ports environment, launch ``testpmd`` with the following arguments::
- ./testpmd -c 0xff -n 6 -w 86:00.0 -w 86:00.1 --log-level="ice,7" -- -i --portmask=0xff --rxq=64 --txq=64 --port-topology=loop
+ ./testpmd -c 0xff -n 6 -a 86:00.0 -a 86:00.1 --log-level="ice,7" -- -i --portmask=0xff --rxq=64 --txq=64 --port-topology=loop
Test case: add/delete rules
============================
@@ -529,7 +529,7 @@ Prerequisites
8. Launch dpdk on VF0 and VF1, and VF0 request DCF mode::
- ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xf -n 4 -w 0000:18:01.0,cap=dcf -w 0000:18:01.1 -- -i
+ ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xf -n 4 -a 0000:18:01.0,cap=dcf -a 0000:18:01.1 -- -i
testpmd> set portlist 1
testpmd> set fwd rxonly
testpmd> set verbose 1
diff --git a/test_plans/cvl_switch_filter_pppoe_test_plan.rst b/test_plans/cvl_switch_filter_pppoe_test_plan.rst
old mode 100644
new mode 100755
index f63965b5..897e8c6c
--- a/test_plans/cvl_switch_filter_pppoe_test_plan.rst
+++ b/test_plans/cvl_switch_filter_pppoe_test_plan.rst
@@ -203,7 +203,7 @@ Prerequisites
6. Launch dpdk with the following arguments in non-pipeline mode::
- ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xf -n 4 -w 0000:18:00.0 --log-level="ice,8" -- -i --txq=16 --rxq=16 --cmdline-file=testpmd_fdir_rules
+ ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xf -n 4 -a 0000:18:00.0 --log-level="ice,8" -- -i --txq=16 --rxq=16 --cmdline-file=testpmd_fdir_rules
testpmd> port config 0 rss-hash-key ipv4 1234abcd1234abcd1234abcd1234abcd1234abcd1234abcd1234abcd1234abcd1234abcd1234abcd1234abcd1234abcd1234abcd
testpmd> set fwd rxonly
testpmd> set verbose 1
@@ -217,7 +217,7 @@ Prerequisites
Launch dpdk in pipeline mode with the following testpmd command line::
- ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xf -n 4 -w 0000:18:00.0,pipeline-mode-support=1 --log-level="ice,8" -- -i --txq=16 --rxq=16
+ ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xf -n 4 -a 0000:18:00.0,pipeline-mode-support=1 --log-level="ice,8" -- -i --txq=16 --rxq=16
Test case: Ethertype filter
===========================
diff --git a/test_plans/cvl_switch_filter_test_plan.rst b/test_plans/cvl_switch_filter_test_plan.rst
old mode 100644
new mode 100755
index 992aa6c8..ae29e64e
--- a/test_plans/cvl_switch_filter_test_plan.rst
+++ b/test_plans/cvl_switch_filter_test_plan.rst
@@ -181,7 +181,7 @@ Prerequisites
6. Launch dpdk with the following arguments in non-pipeline mode::
- ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xf -n 4 -w 0000:18:00.0 --log-level="ice,8" -- -i --txq=16 --rxq=16 --cmdline-file=testpmd_fdir_rules
+ ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xf -n 4 -a 0000:18:00.0 --log-level="ice,8" -- -i --txq=16 --rxq=16 --cmdline-file=testpmd_fdir_rules
testpmd> port config 0 rss-hash-key ipv4 1234abcd1234abcd1234abcd1234abcd1234abcd1234abcd1234abcd1234abcd1234abcd1234abcd1234abcd1234abcd1234abcd
testpmd> set fwd rxonly
testpmd> set verbose 1
@@ -195,7 +195,7 @@ Prerequisites
Launch dpdk in pipeline mode with the following testpmd command line::
- ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xf -n 4 -w 0000:18:00.0,pipeline-mode-support=1 --log-level="ice,8" -- -i --txq=16 --rxq=16
+ ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xf -n 4 -a 0000:18:00.0,pipeline-mode-support=1 --log-level="ice,8" -- -i --txq=16 --rxq=16
Test case: VXLAN non-pipeline mode
==================================
diff --git a/test_plans/enable_package_download_in_ice_driver_test_plan.rst b/test_plans/enable_package_download_in_ice_driver_test_plan.rst
old mode 100644
new mode 100755
index 4139191e..578ba30e
--- a/test_plans/enable_package_download_in_ice_driver_test_plan.rst
+++ b/test_plans/enable_package_download_in_ice_driver_test_plan.rst
@@ -104,7 +104,7 @@ Test case 2: Driver enters Safe Mode successfully
2. Start testpmd::
./testpmd -c 0x3fe -n 6 \
- -w PORT0_PCI,safe-mode-support=1 -w PORT1_PCI,safe-mode-support=1 \
+ -a PORT0_PCI,safe-mode-support=1 -a PORT1_PCI,safe-mode-support=1 \
-- -i --nb-cores=8 --rxq=8 --txq=8 --port-topology=chained
There will be an error reported::
@@ -176,7 +176,7 @@ Compile DPDK and testpmd::
Launch testpmd with 1 default interface and 1 specific interface::
- ./x86_64-native-linux-gcc/app/testpmd -l 6-9 -n 4 -w 18:00.0 -w b1:00.0 --log-level=8 -- -i
+ ./x86_64-native-linux-gcc/app/testpmd -l 6-9 -n 4 -a 18:00.0 -a b1:00.0 --log-level=8 -- -i
In this case, b1:00.0 interface is specific interface.
diff --git a/test_plans/flexible_rxd_test_plan.rst b/test_plans/flexible_rxd_test_plan.rst
old mode 100644
new mode 100755
index b2ca34a4..30ae6993
--- a/test_plans/flexible_rxd_test_plan.rst
+++ b/test_plans/flexible_rxd_test_plan.rst
@@ -94,13 +94,13 @@ Test Case 01: Check single VLAN fields in RXD (802.1Q)
Launch testpmd by::
- ./x86_64-native-linux-gcc/app/testpmd -l 6-9 -n 4 -w 18:00.0,proto_xtr=vlan -- -i --rxq=32 --txq=32 --portmask=0x1 --nb-cores=2
+ ./x86_64-native-linux-gcc/app/testpmd -l 6-9 -n 4 -a 18:00.0,proto_xtr=vlan -- -i --rxq=32 --txq=32 --portmask=0x1 --nb-cores=2
testpmd>set verbose 1
testpmd>set fwd io
testpmd>start
-Please change the core setting (-l option) and port's PCI (-w option) \
+Please change the core setting (-l option) and port's PCI (-a option) \
by your DUT environment
Send a packet with VLAN tag from test network interface::
@@ -130,7 +130,7 @@ Test steps are same to ``Test Case 01``, just change the launch command of testp
Launch testpmd command::
- ./x86_64-native-linux-gcc/app/testpmd -l 6-9 -n 4 -w 18:00.0,proto_xtr=vlan -- -i --rxq=32 --txq=32 --portmask=0x1 --nb-cores=2
+ ./x86_64-native-linux-gcc/app/testpmd -l 6-9 -n 4 -a 18:00.0,proto_xtr=vlan -- -i --rxq=32 --txq=32 --portmask=0x1 --nb-cores=2
Test packet::
@@ -148,7 +148,7 @@ Test steps are same to ``Test Case 01``, just change the launch command of testp
Launch testpmd command::
- ./x86_64-native-linux-gcc/app/testpmd -l 6-9 -n 4 -w 18:00.0,proto_xtr=vlan -- -i --rxq=32 --txq=32 --portmask=0x1 --nb-cores=2
+ ./x86_64-native-linux-gcc/app/testpmd -l 6-9 -n 4 -a 18:00.0,proto_xtr=vlan -- -i --rxq=32 --txq=32 --portmask=0x1 --nb-cores=2
Test packet::
@@ -167,7 +167,7 @@ Test steps are same to ``Test Case 01``, just change the launch command of testp
Launch testpmd command::
- ./x86_64-native-linux-gcc/app/testpmd -l 6-9 -n 4 -w 18:00.0,proto_xtr=vlan -- -i --rxq=32 --txq=32 --portmask=0x1 --nb-cores=2
+ ./x86_64-native-linux-gcc/app/testpmd -l 6-9 -n 4 -a 18:00.0,proto_xtr=vlan -- -i --rxq=32 --txq=32 --portmask=0x1 --nb-cores=2
Test packet::
@@ -186,7 +186,7 @@ Test steps are same to ``Test Case 01``, just change the launch command of testp
Launch testpmd command::
- ./x86_64-native-linux-gcc/app/testpmd -l 6-9 -n 4 -w 18:00.0,proto_xtr=ipv4 -- -i --rxq=32 --txq=32 --portmask=0x1 --nb-cores=2
+ ./x86_64-native-linux-gcc/app/testpmd -l 6-9 -n 4 -a 18:00.0,proto_xtr=ipv4 -- -i --rxq=32 --txq=32 --portmask=0x1 --nb-cores=2
Test packet::
@@ -208,7 +208,7 @@ Test steps are same to ``Test Case 01``, just change the launch command of testp
Launch testpmd command::
- ./x86_64-native-linux-gcc/app/testpmd -l 6-9 -n 4 -w 18:00.0,proto_xtr=ipv6 -- -i --rxq=32 --txq=32 --portmask=0x1 --nb-cores=2
+ ./x86_64-native-linux-gcc/app/testpmd -l 6-9 -n 4 -a 18:00.0,proto_xtr=ipv6 -- -i --rxq=32 --txq=32 --portmask=0x1 --nb-cores=2
Test packet::
@@ -230,7 +230,7 @@ Test steps are same to ``Test Case 01``, just change the launch command of testp
Launch testpmd command::
- ./x86_64-native-linux-gcc/app/testpmd -l 6-9 -n 4 -w 18:00.0,proto_xtr=ipv6_flow -- -i --rxq=32 --txq=32 --portmask=0x1 --nb-cores=2
+ ./x86_64-native-linux-gcc/app/testpmd -l 6-9 -n 4 -a 18:00.0,proto_xtr=ipv6_flow -- -i --rxq=32 --txq=32 --portmask=0x1 --nb-cores=2
Test packet::
@@ -250,7 +250,7 @@ Test steps are same to ``Test Case 01``, just change the launch command of testp
Launch testpmd command::
- ./x86_64-native-linux-gcc/app/testpmd -l 6-9 -n 4 -w 18:00.0,proto_xtr=tcp -- -i --rxq=32 --txq=32 --portmask=0x1 --nb-cores=2
+ ./x86_64-native-linux-gcc/app/testpmd -l 6-9 -n 4 -a 18:00.0,proto_xtr=tcp -- -i --rxq=32 --txq=32 --portmask=0x1 --nb-cores=2
Test packet::
@@ -269,7 +269,7 @@ Test steps are same to ``Test Case 01``, just change the launch command of testp
Launch testpmd command::
- ./x86_64-native-linux-gcc/app/testpmd -l 6-9 -n 4 -w 18:00.0,proto_xtr=tcp -- -i --rxq=32 --txq=32 --portmask=0x1 --nb-cores=2
+ ./x86_64-native-linux-gcc/app/testpmd -l 6-9 -n 4 -a 18:00.0,proto_xtr=tcp -- -i --rxq=32 --txq=32 --portmask=0x1 --nb-cores=2
Test packet::
@@ -288,7 +288,7 @@ Test steps are same to ``Test Case 01``, just change the launch command of testp
Launch testpmd command::
- ./x86_64-native-linux-gcc/app/testpmd -l 6-9 -n 4 -w 18:00.0,proto_xtr='[(2):ipv4,(3):ipv6,(4):tcp]' -- -i --rxq=64 --txq=64 --portmask=0x1
+ ./x86_64-native-linux-gcc/app/testpmd -l 6-9 -n 4 -a 18:00.0,proto_xtr='[(2):ipv4,(3):ipv6,(4):tcp]' -- -i --rxq=64 --txq=64 --portmask=0x1
Create generic flow on NIC::
@@ -360,7 +360,7 @@ Test steps are same to ``Test Case 01``, just change the launch command of testp
MPLS cases use same parameter Launch testpmd::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 6-9 -n 4 -w af:01.0,proto_xtr=ip_offset -- -i --portmask=0x1 --nb-cores=2
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 6-9 -n 4 -a af:01.0,proto_xtr=ip_offset -- -i --portmask=0x1 --nb-cores=2
check RXDID value correct::
diff --git a/test_plans/iavf_flexible_descriptor_test_plan.rst b/test_plans/iavf_flexible_descriptor_test_plan.rst
old mode 100644
new mode 100755
index ae28865d..d03fbe41
--- a/test_plans/iavf_flexible_descriptor_test_plan.rst
+++ b/test_plans/iavf_flexible_descriptor_test_plan.rst
@@ -129,7 +129,7 @@ VLAN cases
1. Launch testpmd by::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 6-9 -n 4 -w af:01.0,proto_xtr=vlan -- -i --rxq=4 --txq=4 --portmask=0x1 --nb-cores=2
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 6-9 -n 4 -a af:01.0,proto_xtr=vlan -- -i --rxq=4 --txq=4 --portmask=0x1 --nb-cores=2
testpmd>set verbose 1
testpmd>set fwd io
testpmd>start
@@ -139,7 +139,7 @@ VLAN cases
expected: RXDID[17]
.. note::
- Please change the core setting (-l option) and port's PCI (-w option) by your DUT environment
+ Please change the core setting (-l option) and port's PCI (-a option) by your DUT environment
Test Case: Check single VLAN fields in RXD (802.1Q)
---------------------------------------------------
@@ -218,7 +218,7 @@ Test steps are same to ``VLAN cases``, just change the launch command of testpmd
Launch testpmd command::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 6-9 -n 4 -w af:01.0,proto_xtr=ipv4 -- -i --rxq=4 --txq=4 --portmask=0x1 --nb-cores=2
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 6-9 -n 4 -a af:01.0,proto_xtr=ipv4 -- -i --rxq=4 --txq=4 --portmask=0x1 --nb-cores=2
check RXDID value correct::
@@ -244,7 +244,7 @@ Test steps are same to ``VLAN cases``, just change the launch command of testpmd
Launch testpmd command::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 6-9 -n 4 -w af:01.0,proto_xtr=ipv6 -- -i --rxq=4 --txq=4 --portmask=0x1 --nb-cores=2
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 6-9 -n 4 -a af:01.0,proto_xtr=ipv6 -- -i --rxq=4 --txq=4 --portmask=0x1 --nb-cores=2
check RXDID value correct::
@@ -270,7 +270,7 @@ Test steps are same to ``VLAN cases``, just change the launch command of testpmd
Launch testpmd command::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 6-9 -n 4 -w af:01.0,proto_xtr=ipv6_flow -- -i --rxq=4 --txq=4 --portmask=0x1 --nb-cores=2
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 6-9 -n 4 -a af:01.0,proto_xtr=ipv6_flow -- -i --rxq=4 --txq=4 --portmask=0x1 --nb-cores=2
check RXDID value correct::
@@ -294,7 +294,7 @@ Test steps are same to ``VLAN cases``, just change the launch command of testpmd
Launch testpmd command::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 6-9 -n 4 -w af:01.0,proto_xtr=tcp -- -i --rxq=4 --txq=4 --portmask=0x1 --nb-cores=2
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 6-9 -n 4 -a af:01.0,proto_xtr=tcp -- -i --rxq=4 --txq=4 --portmask=0x1 --nb-cores=2
check RXDID value correct::
@@ -317,7 +317,7 @@ Test steps are same to ``VLAN cases``, just change the launch command of testpmd
Launch testpmd command::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 6-9 -n 4 -w af:01.0,proto_xtr=tcp -- -i --rxq=4 --txq=4 --portmask=0x1 --nb-cores=2
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 6-9 -n 4 -a af:01.0,proto_xtr=tcp -- -i --rxq=4 --txq=4 --portmask=0x1 --nb-cores=2
check RXDID value correct::
@@ -340,7 +340,7 @@ Test steps are same to ``VLAN cases``, just change the launch command of testpmd
Launch testpmd command::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 6-9 -n 4 -w af:01.0,proto_xtr='[(2):ipv4,(3):ipv6,(4):tcp]' -- -i --rxq=16 --txq=16 --portmask=0x1
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 6-9 -n 4 -a af:01.0,proto_xtr='[(2):ipv4,(3):ipv6,(4):tcp]' -- -i --rxq=16 --txq=16 --portmask=0x1
check RXDID value correct::
@@ -385,13 +385,13 @@ Test steps are same to ``VLAN cases``, use different "proto_xtr" parameters the
use error parameter Launch testpmd::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 6-9 -n 4 -w af:01.0,proto_xtr=vxlan -- -i --rxq=4 --txq=4 --portmask=0x1 --nb-cores=2
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 6-9 -n 4 -a af:01.0,proto_xtr=vxlan -- -i --rxq=4 --txq=4 --portmask=0x1 --nb-cores=2
testpmd can't started, check "iavf_lookup_flex_desc_type(): wrong flex_desc type, it should be: vlan|ipv4|ipv6|ipv6_flow|tcp|ovs|ip_offset" in testpmd output.
don't use parameter launch testpmd::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 6-9 -n 4 -w af:01.0 -- -i --rxq=4 --txq=4 --portmask=0x1 --nb-cores=2
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 6-9 -n 4 -a af:01.0 -- -i --rxq=4 --txq=4 --portmask=0x1 --nb-cores=2
testpmd started, check "iavf_configure_queues(): request RXDID[16] in Queue[0]" in testpmd output
@@ -403,7 +403,7 @@ Test steps are same to ``VLAN cases``, just change the launch command of testpmd
MPLS cases use same parameter Launch testpmd::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 6-9 -n 4 -w af:01.0,proto_xtr=ip_offset -- -i --portmask=0x1 --nb-cores=2
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 6-9 -n 4 -a af:01.0,proto_xtr=ip_offset -- -i --portmask=0x1 --nb-cores=2
check RXDID value correct::
diff --git a/test_plans/iavf_package_driver_error_handle_test_plan.rst b/test_plans/iavf_package_driver_error_handle_test_plan.rst
old mode 100644
new mode 100755
index 23978ea2..fe95e29e
--- a/test_plans/iavf_package_driver_error_handle_test_plan.rst
+++ b/test_plans/iavf_package_driver_error_handle_test_plan.rst
@@ -78,7 +78,7 @@ Test Case 1: Check old driver and latest commes pkg compatibility
./usertools/dpdk-devbind.py -b vfio-pci 0000:b1:01.0
4. Launch the testpmd
- ./x86_64-native-linuxapp-gcc/app/testpmd -l 6-9 -n 4 -w b1:01.0 --file-prefix=vf -- -i --rxq=16 --txq=16 --nb-cores=2
+ ./x86_64-native-linuxapp-gcc/app/testpmd -l 6-9 -n 4 -a b1:01.0 --file-prefix=vf -- -i --rxq=16 --txq=16 --nb-cores=2
5. Create a rss rule
testpmd> flow create 0 ingress pattern eth / ipv4 / end actions rss types l3-dst-only end key_len 0 queues end / end
diff --git a/test_plans/l2tp_esp_coverage_test_plan.rst b/test_plans/l2tp_esp_coverage_test_plan.rst
old mode 100644
new mode 100755
index 4998f0ff..a768684f
--- a/test_plans/l2tp_esp_coverage_test_plan.rst
+++ b/test_plans/l2tp_esp_coverage_test_plan.rst
@@ -88,7 +88,7 @@ Test Case 1: test MAC_IPV4_L2TPv3 HW checksum offload
1. DUT enable rx checksum with "--enable-rx-cksum" when start testpmd::
- ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -w af:01.0 -- -i --enable-rx-cksum
+ ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -a af:01.0 -- -i --enable-rx-cksum
2. DUT setup csum forwarding mode::
@@ -163,7 +163,7 @@ Test Case 2: test MAC_IPV4_ESP HW checksum offload
1. DUT enable rx checksum with "--enable-rx-cksum" when start testpmd, setup csum forwarding mode::
- ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -w af:01.0 -- -i --enable-rx-cksum
+ ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -a af:01.0 -- -i --enable-rx-cksum
2. DUT setup csum forwarding mode::
@@ -1095,7 +1095,7 @@ Test Case 14: MAC_IPV4_L2TPv3 vlan strip on + HW checksum offload check
The pre-steps are as l2tp_esp_iavf_test_plan.
-1. ./x86_64-native-linuxapp-gcc/app/testpmd -l 6-9 -n 4 -w af:01.0 -- -i --rxq=16 --txq=16 --portmask=0x1 --nb-cores=2 --enable-rx-cksum
+1. ./x86_64-native-linuxapp-gcc/app/testpmd -l 6-9 -n 4 -a af:01.0 -- -i --rxq=16 --txq=16 --portmask=0x1 --nb-cores=2 --enable-rx-cksum
2. DUT create fdir rules for MAC_IPV4_L2TPv3 with queue index and mark::
@@ -1189,7 +1189,7 @@ The pre-steps are as l2tp_esp_iavf_test_plan.
Test Case 15: MAC_IPV4_L2TPv3 vlan insert on + SW checksum offload check
========================================================================
-1. ./x86_64-native-linuxapp-gcc/app/testpmd -l 6-9 -n 4 -w af:01.0 -- -i --rxq=16 --txq=16 --portmask=0x1 --nb-cores=2 --enable-rx-cksum
+1. ./x86_64-native-linuxapp-gcc/app/testpmd -l 6-9 -n 4 -a af:01.0 -- -i --rxq=16 --txq=16 --portmask=0x1 --nb-cores=2 --enable-rx-cksum
2. DUT create fdir rules for MAC_IPV4_L2TPv3 with queue index and mark::
@@ -1279,7 +1279,7 @@ Test Case 16: MAC_IPV4_ESP vlan strip on + HW checksum offload check
The pre-steps are as l2tp_esp_iavf_test_plan.
-1. ./x86_64-native-linuxapp-gcc/app/testpmd -l 6-9 -n 4 -w af:01.0 -- -i --rxq=16 --txq=16 --portmask=0x1 --nb-cores=2 --enable-rx-cksum
+1. ./x86_64-native-linuxapp-gcc/app/testpmd -l 6-9 -n 4 -a af:01.0 -- -i --rxq=16 --txq=16 --portmask=0x1 --nb-cores=2 --enable-rx-cksum
2. DUT create fdir rules for MAC_IPV4_ESP with queue index and mark::
@@ -1372,7 +1372,7 @@ The pre-steps are as l2tp_esp_iavf_test_plan.
Test Case 17: MAC_IPV6_NAT-T-ESP vlan insert on + SW checksum offload check
===========================================================================
-1. ./x86_64-native-linuxapp-gcc/app/testpmd -l 6-9 -n 4 -w af:01.0 -- -i --rxq=16 --txq=16 --portmask=0x1 --nb-cores=2 --enable-rx-cksum
+1. ./x86_64-native-linuxapp-gcc/app/testpmd -l 6-9 -n 4 -a af:01.0 -- -i --rxq=16 --txq=16 --portmask=0x1 --nb-cores=2 --enable-rx-cksum
2. DUT create fdir rules for MAC_IPV6_NAT-T-ESP with queue index and mark::
--git a/tests/TestSuite_cvl_advanced_iavf_rss_gtpu.py b/tests/TestSuite_cvl_advanced_iavf_rss_gtpu.py
old mode 100644
new mode 100755
index d19ddbf0..0ce0e7ec
--- a/tests/TestSuite_cvl_advanced_iavf_rss_gtpu.py
+++ b/tests/TestSuite_cvl_advanced_iavf_rss_gtpu.py
@@ -6971,7 +6971,7 @@ class TestCVLAdvancedIAVFRSSGTPU(TestCase):
# if support add --disable-rss
param = "--rxq=16 --txq=16"
self.pmd_output.start_testpmd(cores="1S/4C/1T", param=param,
- eal_param=f"-w {self.vf0_pci}", socket=self.ports_socket)
+ eal_param=f"-a {self.vf0_pci}", socket=self.ports_socket)
'''
self.symmetric = symmetric
if symmetric:
--git a/tests/TestSuite_cvl_advanced_rss.py b/tests/TestSuite_cvl_advanced_rss.py
old mode 100644
new mode 100755
index 8ed6d1af..7c8a317b
--- a/tests/TestSuite_cvl_advanced_rss.py
+++ b/tests/TestSuite_cvl_advanced_rss.py
@@ -4920,7 +4920,7 @@ class AdvancedRSSTest(TestCase):
else:
param = "--rxq=64 --txq=64 --disable-rss --rxd=384 --txd=384"
out = self.pmd_output.start_testpmd(cores="1S/4C/1T", param=param,
- eal_param=f"-w {self.pci0}", socket=self.ports_socket)
+ eal_param=f"-a {self.pci0}", socket=self.ports_socket)
self.symmetric = symmetric
if symmetric is True:
'''
--git a/tests/TestSuite_cvl_advanced_rss_gtpu.py b/tests/TestSuite_cvl_advanced_rss_gtpu.py
index 37be57f7..e09b7875 100755
--- a/tests/TestSuite_cvl_advanced_rss_gtpu.py
+++ b/tests/TestSuite_cvl_advanced_rss_gtpu.py
@@ -4256,7 +4256,7 @@ class TestCVLAdvancedRSSGTPU(TestCase):
else:
param = "--rxq=64 --txq=64 --disable-rss --rxd=384 --txd=384"
self.pmd_output.start_testpmd(cores="1S/4C/1T", param=param,
- eal_param=f"-w {self.pci0}", socket=self.ports_socket)
+ eal_param=f"-a {self.pci0}", socket=self.ports_socket)
self.enable_rss = enable_rss
if set_rss:
self.pmd_output.execute_cmd('port config all rss all')
--git a/tests/TestSuite_cvl_advanced_rss_pppoe.py b/tests/TestSuite_cvl_advanced_rss_pppoe.py
old mode 100644
new mode 100755
index 3952bbf0..6bd21af6
--- a/tests/TestSuite_cvl_advanced_rss_pppoe.py
+++ b/tests/TestSuite_cvl_advanced_rss_pppoe.py
@@ -4526,7 +4526,7 @@ class Advanced_rss_pppoe(TestCase):
else:
param = "--rxq=64 --txq=64 --disable-rss --rxd=384 --txd=384"
out = self.pmd_output.start_testpmd(cores="1S/4C/1T", param=param,
- eal_param=f"-w {self.pci_list[0]}", socket=self.ports_socket)
+ eal_param=f"-a {self.pci_list[0]}", socket=self.ports_socket)
self.symmetric = symmetric
if symmetric:
# Need config rss in setup
--git a/tests/TestSuite_cvl_advanced_rss_vlan_esp_ah_l2tp_pfcp.py b/tests/TestSuite_cvl_advanced_rss_vlan_esp_ah_l2tp_pfcp.py
old mode 100644
new mode 100755
index df071e91..e3f08084
--- a/tests/TestSuite_cvl_advanced_rss_vlan_esp_ah_l2tp_pfcp.py
+++ b/tests/TestSuite_cvl_advanced_rss_vlan_esp_ah_l2tp_pfcp.py
@@ -857,7 +857,7 @@ class Advanced_rss_vlan_ah_l2tp_pfcp(TestCase):
else:
param = "--rxq=64 --txq=64 --disable-rss --rxd=384 --txd=384"
out = self.pmd_output.start_testpmd(cores="1S/4C/1T", param=param,
- eal_param=f"-w {self.pci_list[0]}", socket=self.ports_socket)
+ eal_param=f"-a {self.pci_list[0]}", socket=self.ports_socket)
self.symmetric = symmetric
if symmetric:
# Need config rss in setup
diff --git a/tests/TestSuite_cvl_fdir.py b/tests/TestSuite_cvl_fdir.py
old mode 100644
new mode 100755
index 18836756..541599fe
--- a/tests/TestSuite_cvl_fdir.py
+++ b/tests/TestSuite_cvl_fdir.py
@@ -2585,7 +2585,7 @@ class TestCVLFdir(TestCase):
self.pmd_output.start_testpmd(cores="1S/4C/1T",
param="--portmask=%s --rxq=%d --txq=%d --port-topology=loop" % (
self.portMask, rxq, txq),
- eal_param="-w %s -w %s --log-level=ice,7" % (
+ eal_param="-a %s -a %s --log-level=ice,7" % (
self.pci0, self.pci1), socket=self.ports_socket)
self.config_testpmd()
@@ -3387,7 +3387,7 @@ class TestCVLFdir(TestCase):
out = self.pmd_output.start_testpmd(cores="1S/4C/1T",
param="--portmask=%s --rxq=%d --txq=%d --port-topology=loop --cmdline-file=%s" % (
self.portMask, 64, 64, cmd_path),
- eal_param="-w %s -w %s --log-level='ice,7'" % (
+ eal_param="-a %s -a %s --log-level='ice,7'" % (
self.pci0, self.pci1), socket=self.ports_socket)
self.verify('Failed to create flow' not in out, "create some rule failed")
self.config_testpmd()
--git a/tests/TestSuite_cvl_iavf_rss_configure.py b/tests/TestSuite_cvl_iavf_rss_configure.py
index 86b2819e..baf33c56 100755
--- a/tests/TestSuite_cvl_iavf_rss_configure.py
+++ b/tests/TestSuite_cvl_iavf_rss_configure.py
@@ -311,7 +311,7 @@ class IAVFRSSConfigureTest(TestCase):
"""
#Prepare testpmd EAL and parameters
self.pmdout.start_testpmd(cores=self.cores, param=param,
- eal_param=f"-w {self.vf0_pci}", socket=self.ports_socket)
+ eal_param=f"-a {self.vf0_pci}", socket=self.ports_socket)
# test link status
res = self.pmdout.wait_link_status_up('all', timeout=15)
self.verify(res is True, 'there have port link is down')
diff --git a/tests/TestSuite_cvl_qinq.py b/tests/TestSuite_cvl_qinq.py
old mode 100644
new mode 100755
index 0c950b03..a2bd5166
--- a/tests/TestSuite_cvl_qinq.py
+++ b/tests/TestSuite_cvl_qinq.py
@@ -443,7 +443,7 @@ class TestCvlQinq(TestCase):
def start_tcpdump(self, rxItf):
self.tester.send_expect("rm -rf getPackageByTcpdump.cap", "#")
- self.tester.send_expect("tcpdump -A -nn -e -vv -w getPackageByTcpdump.cap -i %s 2> /dev/null& " % rxItf, "#")
+ self.tester.send_expect("tcpdump -A -nn -e -vv -a getPackageByTcpdump.cap -i %s 2> /dev/null& " % rxItf, "#")
time.sleep(2)
def get_tcpdump_package(self):
diff --git a/tests/TestSuite_enable_package_download_in_ice_driver.py b/tests/TestSuite_enable_package_download_in_ice_driver.py
old mode 100644
new mode 100755
index 8bf21d18..0c85f319
--- a/tests/TestSuite_enable_package_download_in_ice_driver.py
+++ b/tests/TestSuite_enable_package_download_in_ice_driver.py
@@ -95,7 +95,7 @@ class TestEnable_Package_Download_In_Ice_Driver(TestCase):
self.eal_param = ""
if safe_mode_support == "true":
for i in range(len(self.dut_ports)):
- self.eal_param = self.eal_param + "-w %s,safe-mode-support=1 " % self.dut.ports_info[i]['pci']
+ self.eal_param = self.eal_param + "-a %s,safe-mode-support=1 " % self.dut.ports_info[i]['pci']
out = self.dut_testpmd.start_testpmd("all", "--nb-cores=8 --rxq=%s --txq=%s --port-topology=chained" % (self.PF_QUEUE, self.PF_QUEUE), eal_param=self.eal_param)
if ice_pkg == "false":
if safe_mode_support == "true":
@@ -340,7 +340,7 @@ class TestEnable_Package_Download_In_Ice_Driver(TestCase):
self.copy_specify_ice_pkg(self.new_pkgs[i])
self.generate_delete_specify_pkg(pkg_ver=self.new_pkgs[i], sn=self.nic_sn[i], key="true")
- eal_param = "-w %s " % self.nic_pci[0] + "-w %s " % self.nic_pci[1] + "--log-level=8"
+ eal_param = "-a %s " % self.nic_pci[0] + "-a %s " % self.nic_pci[1] + "--log-level=8"
out = self.dut_testpmd.execute_cmd(self.path + eal_param + " -- -i ")
self.dut_testpmd.quit()
diff --git a/tests/TestSuite_iavf_package_driver_error_handle.py b/tests/TestSuite_iavf_package_driver_error_handle.py
old mode 100644
new mode 100755
index d155afc9..c180c5a1
--- a/tests/TestSuite_iavf_package_driver_error_handle.py
+++ b/tests/TestSuite_iavf_package_driver_error_handle.py
@@ -98,7 +98,7 @@ class Testiavf_package_and_driver_check(TestCase):
self.eal_param = ""
if safe_mode_support == "true":
for i in range(len(self.dut_ports)):
- self.eal_param = self.eal_param + "-w %s,safe-mode-support=1 " % self.dut.ports_info[i]['pci']
+ self.eal_param = self.eal_param + "-a %s,safe-mode-support=1 " % self.dut.ports_info[i]['pci']
out = self.dut_testpmd.start_testpmd("all", "--nb-cores=8 --rxq=%s --txq=%s --port-topology=chained" % (self.PF_QUEUE, self.PF_QUEUE), eal_param=self.eal_param)
if ice_pkg == "false":
if safe_mode_support == "true":
diff --git a/tests/TestSuite_l2tp_esp_coverage.py b/tests/TestSuite_l2tp_esp_coverage.py
old mode 100644
new mode 100755
index 10520c8b..96378db3
--- a/tests/TestSuite_l2tp_esp_coverage.py
+++ b/tests/TestSuite_l2tp_esp_coverage.py
@@ -153,7 +153,7 @@ class L2tpEspCoverage(TestCase):
param_str = " --rxq=16 --txq=16 --port-topology=loop --enable-rx-cksum "
else:
param_str = " --rxq=16 --txq=16 --port-topology=loop "
- self.pmd_output.start_testpmd(cores="1S/8C/1T", param=param_str, eal_param="-w %s" % port_pci)
+ self.pmd_output.start_testpmd(cores="1S/8C/1T", param=param_str, eal_param="-a %s" % port_pci)
self.dut.send_expect("set fwd rxonly", "testpmd> ", 15)
self.dut.send_expect("set verbose 1", "testpmd> ", 15)
--
2.17.1
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2021-09-30 3:30 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-09-30 3:44 [dts] [PATCH V1] test_plan/tests: replace eal allowlist option Jiale Song
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).