test suite reviews and discussions
 help / color / mirror / Atom feed
* [dts][PATCH V3 0/3] tests/generic_flow_api: add fdir's case
@ 2021-11-18  7:17 Yu Jiang
  2021-11-18  7:17 ` [dts][PATCH V3 1/3] test_plans/fdir: move case:fdir for Control levels of FDir match reporting to generic_flow_api Yu Jiang
                   ` (2 more replies)
  0 siblings, 3 replies; 6+ messages in thread
From: Yu Jiang @ 2021-11-18  7:17 UTC (permalink / raw)
  To: yuan.peng, dts; +Cc: Yu Jiang

tests/generic_flow_api: add fdir's case

Yu Jiang (3):
  test_plans/fdir: move case:fdir for Control levels of FDir match
    reporting to generic_flow_api
  test_plans/generic_flow_api: add case:fdir for Control levels of FDir
    match reporting
  tests/generic_flow_api: add case test_fdir_for_match_report

 test_plans/fdir_test_plan.rst             | 134 ------------------------------
 test_plans/generic_flow_api_test_plan.rst | 118 ++++++++++++++++++++++++++
 tests/TestSuite_generic_flow_api.py       | 113 ++++++++++++++++++++++++-
 3 files changed, 229 insertions(+), 136 deletions(-)

-- 
2.7.4


^ permalink raw reply	[flat|nested] 6+ messages in thread

* [dts][PATCH V3 1/3] test_plans/fdir: move case:fdir for Control levels of FDir match reporting to generic_flow_api
  2021-11-18  7:17 [dts][PATCH V3 0/3] tests/generic_flow_api: add fdir's case Yu Jiang
@ 2021-11-18  7:17 ` Yu Jiang
  2021-11-18  7:17 ` [dts][PATCH V3 2/3] test_plans/generic_flow_api: add case:fdir for Control levels of FDir match reporting Yu Jiang
  2021-11-18  7:17 ` [dts][PATCH V3 3/3] tests/generic_flow_api: add case test_fdir_for_match_report Yu Jiang
  2 siblings, 0 replies; 6+ messages in thread
From: Yu Jiang @ 2021-11-18  7:17 UTC (permalink / raw)
  To: yuan.peng, dts; +Cc: Yu Jiang

move plan for case: Control levels of FDir match reporting to generic_flow_api

Signed-off-by: Yu Jiang <yux.jiang@intel.com>
---
 test_plans/fdir_test_plan.rst | 134 ------------------------------------------
 1 file changed, 134 deletions(-)

diff --git a/test_plans/fdir_test_plan.rst b/test_plans/fdir_test_plan.rst
index dee03c3..72ac320 100644
--- a/test_plans/fdir_test_plan.rst
+++ b/test_plans/fdir_test_plan.rst
@@ -199,140 +199,6 @@ are free to be used is equal to 8192 (8192 * 32B = 256KB).::
    ########################################################################
 
 
-Test case: Control levels of FDir match reporting
-=================================================
-
-The status of FDir filter matching for each packet can be reported by the
-hardware through the RX descriptor of each received packet, and this information
-is copied into the packet mbuf, that can be examined by the application.
-
-There are three different reporting modes, that can be set in testpmd using the
-``--pkt-filter-report-hash`` command line argument:
-
-
-Sub-case: ``--pkt-filter-report-hash=none`` mode
-------------------------------------------------
-
-In this mode FDir reporting mode, matches are never reported.
-Start the ``testpmd`` application as follows::
-
-   ./testpmd -c 0xf -- -i --portmask=0x1 --nb-cores=2 --rxq=2 --txq=2
-     --disable-rss --pkt-filter-mode=perfect --pkt-filter-report-hash=none
-   testpmd> set verbose 1
-   testpmd> set fwd rxonly
-   testpmd> start
-
-Send the ``p_udp`` packet with Scapy on the traffic generator and check that no
-FDir information is printed::
-
-   testpmd> port 0/queue 0: received 1 packets
-    src=00:1B:21:53:1F:14 - dst=00:1B:21:91:3D:2C - type=0x0800 - length=60 - nb_segs=1
-    PKT_RX_IP_CKSUM
-    PKT_RX_IPV4_HDR
-
-Add a perfect filter to match the ``p_udp`` packet, and send the packet again.
-No Dir information is printed, but it can be seen that the packet went to queue
-1::
-
-   testpmd> add_perfect_filter 0 udp src 192.168.0.1 1024 dst 192.168.0.2 1024
-     flexbytes 0x800 vlan 0 queue 1 soft 0x14
-   testpmd> port 0/queue 1: received 1 packets
-      src=00:1B:21:53:1F:14 - dst=00:1B:21:91:3D:2C - type=0x0800 - length=60 - nb_segs=1
-      PKT_RX_IP_CKSUM
-      PKT_RX_IPV4_HDR
-
-
-Sub-case: ``--pkt-filter-report-hash=match`` mode
--------------------------------------------------
-
-In this mode FDir reporting mode, FDir information is printed for packets that
-match a filter.
-Start the ``testpmd`` application as follows::
-
-   ./testpmd -c 0xf -- -i --portmask=0x1 --nb-cores=2 --rxq=2 --txq=2 --disable-rss
-      --pkt-filter-mode=perfect --pkt-filter-report-hash=match
-   testpmd> set verbose 1
-   testpmd> set fwd rxonly
-   testpmd> start
-
-Send the ``p_udp`` packet with Scapy on the traffic generator and check that no
-FDir information is printed::
-
-   testpmd> port 0/queue 0: received 1 packets
-      src=00:1B:21:53:1F:14 - dst=00:1B:21:91:3D:2C - type=0x0800 - length=60 - nb_segs=1
-      PKT_RX_IP_CKSUM
-      PKT_RX_IPV4_HDR
-
-Add a perfect filter to match the ``p_udp`` packet, and send the packet again.
-This time, the match is indicated (``PKT_RX_PKT_RX_FDIR``), and its details
-(hash, id) printed ::
-
-   testpmd> add_perfect_filter 0 udp src 192.168.0.1 1024 dst 192.168.0.2 1024
-      flexbytes 0x800 vlan 0 queue 1 soft 0x14
-   testpmd> port 0/queue 1: received 1 packets
-      src=00:1B:21:53:1F:14 - dst=00:1B:21:91:3D:2C - type=0x0800 - length=60
-      -nb_segs=1 - FDIR hash=0x43c - FDIR id=0x14
-      PKT_RX_PKT_RX_FDIR
-      PKT_RX_IP_CKSUM
-      PKT_RX_IPV4_HDR
-
-Update the perfect filter to match the ``p_udp1`` packet, and send the packet again.
-This time, the match is indicated (``PKT_RX_PKT_RX_FDIR``), and its details
-(hash, id) printed ::
-
-   testpmd> add_perfect_filter 0 udp src 192.168.1.1 1024 dst 192.168.1.2 0
-       flexbytes 0x800 vlan 0 queue 1 soft 0x14
-   testpmd> port 0/queue 1: received 1 packets
-      src=00:1B:21:53:1F:14 - dst=00:1B:21:91:3D:2C - type=0x0800 - length=60
-      -nb_segs=1 - FDIR hash=0x43c - FDIR id=0x14
-      PKT_RX_PKT_RX_FDIR
-      PKT_RX_IP_CKSUM
-      PKT_RX_IPV4_HDR
-
-Remove the perfect filter match the ``p_udp1`` and ``p_udp`` packets, and send the packet again.
-Check that no FDir information is printed::
-
-   testpmd> port 0/queue 0: received 1 packets
-      src=00:1B:21:53:1F:14 - dst=00:1B:21:91:3D:2C - type=0x0800 - length=60 - nb_segs=1
-      PKT_RX_IP_CKSUM
-      PKT_RX_IPV4_HDR
-
-Sub-case: ``--pkt-filter-report-hash=always`` mode
---------------------------------------------------
-
-In this mode FDir reporting mode, FDir information is printed for every received
-packet.
-Start the ``testpmd`` application as follows::
-
-   ./testpmd -c 0xf -- -i --portmask=0x1 --nb-cores=2 --rxq=2 --txq=2 --disable-rss
-      --pkt-filter-mode=perfect --pkt-filter-report-hash=always
-   testpmd> set verbose 1
-   testpmd> set fwd rxonly
-   testpmd> start
-
-Send the ``p_udp`` packet with Scapy on the traffic generator and check the
-output (FDIR id=0x0)::
-
-   testpmd> port 0/queue 0: received 1 packets
-      src=00:1B:21:53:1F:14 - dst=00:1B:21:91:3D:2C - type=0x0800 - length=60
-      - nb_segs=1 - FDIR hash=0x43c - FDIR id=0x0
-      PKT_RX_PKT_RX_FDIR
-      PKT_RX_IP_CKSUM
-      PKT_RX_IPV4_HDR
-
-Add a perfect filter to match the ``p_udp`` packet, and send the packet again.
-This time, the filter ID is different, and the packet goes to queue 1 ::
-
-   testpmd> add_perfect_filter 0 udp src 192.168.0.1 1024 dst 192.168.0.2 1024
-      flexbytes 0x800 vlan 0 queue 1 soft 0x14
-   testpmd> port 0/queue 1: received 1 packets
-      src=00:1B:21:53:1F:14 - dst=00:1B:21:91:3D:2C - type=0x0800 - length=60
-      - nb_segs=1 - FDIR hash=0x43c - FDIR id=0x14
-      PKT_RX_PKT_RX_FDIR
-      PKT_RX_IP_CKSUM
-      PKT_RX_IPV4_HDR
-
-
 Test case: FDir signature matching mode
 =======================================
 
-- 
2.7.4


^ permalink raw reply	[flat|nested] 6+ messages in thread

* [dts][PATCH V3 2/3] test_plans/generic_flow_api: add case:fdir for Control levels of FDir match reporting
  2021-11-18  7:17 [dts][PATCH V3 0/3] tests/generic_flow_api: add fdir's case Yu Jiang
  2021-11-18  7:17 ` [dts][PATCH V3 1/3] test_plans/fdir: move case:fdir for Control levels of FDir match reporting to generic_flow_api Yu Jiang
@ 2021-11-18  7:17 ` Yu Jiang
  2021-11-18  7:17 ` [dts][PATCH V3 3/3] tests/generic_flow_api: add case test_fdir_for_match_report Yu Jiang
  2 siblings, 0 replies; 6+ messages in thread
From: Yu Jiang @ 2021-11-18  7:17 UTC (permalink / raw)
  To: yuan.peng, dts; +Cc: Yu Jiang

add fdir's plan: IXGBE fdir for Control levels of FDir match reporting

Signed-off-by: Yu Jiang <yux.jiang@intel.com>
---
 test_plans/generic_flow_api_test_plan.rst | 118 ++++++++++++++++++++++++++++++
 1 file changed, 118 insertions(+)

diff --git a/test_plans/generic_flow_api_test_plan.rst b/test_plans/generic_flow_api_test_plan.rst
index a07b809..d6a6a94 100644
--- a/test_plans/generic_flow_api_test_plan.rst
+++ b/test_plans/generic_flow_api_test_plan.rst
@@ -1088,6 +1088,124 @@ Test case: IXGBE fdir for mac/vlan(support by x540, x552, x550)
     testpmd> flow flush 0
     testpmd> flow list 0
 
+Test case: IXGBE fdir for Control levels of FDir match reporting(supported by 82599)
+====================================================================================
+
+The status of FDir filter matching for each packet can be reported by the
+hardware through the RX descriptor of each received packet, and this information
+is copied into the packet mbuf, that can be examined by the application.
+
+There are three different reporting modes, that can be set in testpmd using the
+``--pkt-filter-report-hash`` command line argument:
+
+
+Sub-case: ``--pkt-filter-report-hash=none`` mode
+------------------------------------------------
+
+In this mode FDir reporting mode, matches are never reported.
+Start the ``testpmd`` application as follows::
+
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xf -- -i --rxq=4 --txq=4 --disable-rss --pkt-filter-mode=perfect --pkt-filter-report-hash=none
+    testpmd> set verbose 1
+    testpmd> set fwd rxonly
+    testpmd> start
+
+Send the matched packet with Scapy on the traffic generator and check that no FDir information is printed::
+
+    packet: pkt0=Ether(dst="90:E2:BA:AC:99:FC")/IP(src="192.168.0.1", dst="192.168.0.2")/Raw('x' * 20)
+    testpmd> port 0/queue 0: received 1 packets
+    src=00:0C:29:B3:0E:82 - dst=90:E2:BA:AC:99:FC - type=0x0800 - length=60 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4  -  sw ptype: L2_ETHER L3_IPV4  - l2_len=14 - l3_len=20 - Receive queue=0x0
+    ol_flags: RTE_MBUF_F_RX_L4_CKSUM_GOOD RTE_MBUF_F_RX_IP_CKSUM_GOOD RTE_MBUF_F_RX_OUTER_L4_CKSUM_UNKNOWN
+
+Add flow filter rule, and send the matched packet again.
+No Dir information is printed, but it can be seen that the packet goes to queue 1::
+
+    testpmd> flow create 0 ingress pattern eth / ipv4 src is 192.168.0.1 dst is 192.168.0.2 / end actions queue index 1 / mark id 1 / end
+    testpmd> port 0/queue 1: received 1 packets
+    src=00:0C:29:B3:0E:82 - dst=90:E2:BA:AC:99:FC - type=0x0800 - length=60 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4  - sw ptype: L2_ETHER L3_IPV4  - l2_len=14 - l3_len=20 - Receive queue=0x1
+    ol_flags: RTE_MBUF_F_RX_L4_CKSUM_GOOD RTE_MBUF_F_RX_IP_CKSUM_GOOD RTE_MBUF_F_RX_OUTER_L4_CKSUM_UNKNOWN
+    testpmd>  quit
+
+Sub-case: ``--pkt-filter-report-hash=match`` mode
+-------------------------------------------------
+
+In this mode FDir reporting mode, FDir information is printed for packets that match a filter.
+Start the ``testpmd`` application as follows::
+
+   ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xf -- -i --rxq=4 --txq=4 --disable-rss --pkt-filter-mode=perfect --pkt-filter-report-hash=match
+    testpmd> set verbose 1
+    testpmd> set fwd rxonly
+    testpmd> start
+
+Send pkt0 packet with Scapy on the traffic generator and check that no FDir information is printed::
+
+    packet: pkt0=Ether(dst="90:E2:BA:AC:99:FC")/IP(src="192.168.0.1", dst="192.168.0.2")/Raw('x' * 20)
+    testpmd> port 0/queue 0: received 1 packets
+    src=00:0C:29:B3:0E:82 - dst=90:E2:BA:AC:99:FC - type=0x0800 - length=60 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4  - sw ptype: L2_ETHER L3_IPV4  - l2_len=14 - l3_len=20 - Receive queue=0x0
+    ol_flags: RTE_MBUF_F_RX_L4_CKSUM_GOOD RTE_MBUF_F_RX_IP_CKSUM_GOOD RTE_MBUF_F_RX_OUTER_L4_CKSUM_UNKNOWN
+
+Add flow filter rule, and send the pkt0 packet again.
+This time, the match is indicated (``RTE_MBUF_F_RX_FDIR``), and its details (hash, id) printed ::
+
+    testpmd> flow create 0 ingress pattern eth / ipv4 src is 192.168.0.1 dst is 192.168.0.2 / end actions queue index 1 / mark id 1 / end
+    testpmd> port 0/queue 1: received 1 packets
+    src=00:0C:29:B3:0E:82 - dst=90:E2:BA:AC:99:FC - type=0x0800 - length=60 - nb_segs=1 - FDIR matched hash=0x2f3 ID=0x1  - hw ptype: L2_ETHER L3_IPV4  - sw ptype: L2_ETHER L3_IPV4  - l2_len=14 - l3_len=20 - Receive queue=0x1
+    ol_flags: RTE_MBUF_F_RX_FDIR RTE_MBUF_F_RX_L4_CKSUM_GOOD RTE_MBUF_F_RX_IP_CKSUM_GOOD RTE_MBUF_F_RX_OUTER_L4_CKSUM_UNKNOWN
+
+Add flow filter rule by using different src,dst, and send the matched pkt1 packet again.
+This time, the match is indicated (``RTE_MBUF_F_RX_FDIR``), and its details (hash, id) printed ::
+
+    packet: pkt1=Ether(dst="90:E2:BA:AC:99:FC")/IP(src="192.168.1.1", dst="192.168.1.2")/Raw('x' * 20)
+    testpmd> flow create 0 ingress pattern eth / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions queue index 2 / mark id 2 / end
+    testpmd> port 0/queue 2: received 1 packets
+    src=00:0C:29:B3:0E:82 - dst=90:E2:BA:AC:99:FC - type=0x0800 - length=64 - nb_segs=1 - FDIR matched hash=0x2f3 ID=0x2  - hw ptype: L2_ETHER L3_IPV4  - sw ptype: L2_ETHER L3_IPV4  - l2_len=14 - l3_len=20 - Receive queue=0x2
+    ol_flags: RTE_MBUF_F_RX_FDIR RTE_MBUF_F_RX_L4_CKSUM_GOOD RTE_MBUF_F_RX_IP_CKSUM_GOOD RTE_MBUF_F_RX_OUTER_L4_CKSUM_UNKNOWN
+
+Remove rule1 and send the matched pkt0 packet again. Check that no FDir information is printed::
+
+    testpmd> flow destroy 0 rule 0
+    Flow rule #0 destroyed
+    testpmd> port 0/queue 0: received 1 packets
+    src=00:0C:29:B3:0E:82 - dst=90:E2:BA:AC:99:FC - type=0x0800 - length=60 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4  - sw ptype: L2_ETHER L3_IPV4  - l2_len=14 - l3_len=20 - Receive queue=0x0
+    ol_flags: RTE_MBUF_F_RX_L4_CKSUM_GOOD RTE_MBUF_F_RX_IP_CKSUM_GOOD RTE_MBUF_F_RX_OUTER_L4_CKSUM_UNKNOWN
+
+Remove rule2, and send the match pkt1 packet again. Check that no FDir information is printed::
+
+    testpmd> flow destroy 0 rule 1
+    Flow rule #1 destroyed
+    testpmd> port 0/queue 0: received 1 packets
+    src=00:0C:29:B3:0E:82 - dst=90:E2:BA:AC:99:FC - type=0x0800 - length=60 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4  - sw ptype: L2_ETHER L3_IPV4  - l2_len=14 - l3_len=20 - Receive queue=0x0
+    ol_flags: RTE_MBUF_F_RX_L4_CKSUM_GOOD RTE_MBUF_F_RX_IP_CKSUM_GOOD RTE_MBUF_F_RX_OUTER_L4_CKSUM_UNKNOWN
+    testpmd>  quit
+
+Sub-case: ``--pkt-filter-report-hash=always`` mode
+--------------------------------------------------
+
+In this mode FDir reporting mode, FDir information is printed for every received packet.
+Start the ``testpmd`` application as follows::
+
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xf -- -i --rxq=4 --txq=4 --disable-rss --pkt-filter-mode=perfect --pkt-filter-report-hash=always
+    testpmd> set verbose 1
+    testpmd> set fwd rxonly
+    testpmd> start
+
+
+Send matched pkt0 packet with Scapy on the traffic generator and check the output (FDIR id=0x0)::
+
+    packet: pkt0=Ether(dst="90:E2:BA:AC:99:FC")/IP(src="192.168.0.1", dst="192.168.0.2")/Raw('x' * 20)
+    testpmd> port 0/queue 0: received 1 packets
+    src=00:0C:29:B3:0E:82 - dst=90:E2:BA:AC:99:FC - type=0x0800 - length=60 - nb_segs=1 - FDIR matched hash=0x2f3 ID=0x0  - hw ptype: L2_ETHER L3_IPV4  - sw ptype: L2_ETHER L3_IPV4  - l2_len=14 - l3_len=20 - Receive queue=0x0
+    ol_flags: RTE_MBUF_F_RX_FDIR RTE_MBUF_F_RX_L4_CKSUM_GOOD RTE_MBUF_F_RX_IP_CKSUM_GOOD RTE_MBUF_F_RX_OUTER_L4_CKSUM_UNKNOWN
+
+Add flow filter rule, and send the matched pkt0 packet again.
+This time, the filter ID is different, and the packet goes to queue 1 ::
+
+    testpmd> flow create 0 ingress pattern eth / ipv4 src is 192.168.0.1 dst is 192.168.0.2 / end actions queue index 1 / mark id 1 / end
+    testpmd> port 0/queue 1: received 1 packets
+    src=00:0C:29:B3:0E:82 - dst=90:E2:BA:AC:99:FC - type=0x0800 - length=60 - nb_segs=1 - FDIR matched hash=0x2f3 ID=0x1  - hw ptype: L2_ETHER L3_IPV4  - sw ptype: L2_ETHER L3_IPV4  - l2_len=14 - l3_len=20 - Receive queue=0x1
+    ol_flags: RTE_MBUF_F_RX_FDIR RTE_MBUF_F_RX_L4_CKSUM_GOOD RTE_MBUF_F_RX_IP_CKSUM_GOOD RTE_MBUF_F_RX_OUTER_L4_CKSUM_UNKNOWN
+    testpmd>  quit
+
 Test case: IXGBE fdir for tunnel (vxlan and nvgre)(support by x540, x552, x550)
 ===============================================================================
 
-- 
2.7.4


^ permalink raw reply	[flat|nested] 6+ messages in thread

* [dts][PATCH V3 3/3] tests/generic_flow_api: add case test_fdir_for_match_report
  2021-11-18  7:17 [dts][PATCH V3 0/3] tests/generic_flow_api: add fdir's case Yu Jiang
  2021-11-18  7:17 ` [dts][PATCH V3 1/3] test_plans/fdir: move case:fdir for Control levels of FDir match reporting to generic_flow_api Yu Jiang
  2021-11-18  7:17 ` [dts][PATCH V3 2/3] test_plans/generic_flow_api: add case:fdir for Control levels of FDir match reporting Yu Jiang
@ 2021-11-18  7:17 ` Yu Jiang
  2021-11-23  2:33   ` Peng, Yuan
  2 siblings, 1 reply; 6+ messages in thread
From: Yu Jiang @ 2021-11-18  7:17 UTC (permalink / raw)
  To: yuan.peng, dts; +Cc: Yu Jiang

add case test_fdir_for_match_report

Signed-off-by: Yu Jiang <yux.jiang@intel.com>
---
 tests/TestSuite_generic_flow_api.py | 113 +++++++++++++++++++++++++++++++++++-
 1 file changed, 111 insertions(+), 2 deletions(-)

diff --git a/tests/TestSuite_generic_flow_api.py b/tests/TestSuite_generic_flow_api.py
index e6b04ab..269b6c8 100644
--- a/tests/TestSuite_generic_flow_api.py
+++ b/tests/TestSuite_generic_flow_api.py
@@ -54,6 +54,7 @@ from framework.project_dpdk import DPDKdut
 from framework.settings import DRIVERS, HEADER_SIZE
 from framework.test_case import TestCase
 from framework.virt_dut import VirtDut
+from framework.test_case import check_supported_nic
 
 MAX_VLAN = 4095
 MAX_QUEUE = 15
@@ -158,9 +159,10 @@ class TestGeneric_flow_api(TestCase):
         """
         return 1024 * queue_num + 512
 
-    def verify_result(self, pf_vf, expect_rxpkts, expect_queue, verify_mac):
+    def verify_result(self, pf_vf, expect_rxpkts, expect_queue, verify_mac, check_fdir=''):
         """
         verify the packet to the expected queue or be dropped
+        : check_fdir=[exist|non-exist]
         """
         # self.tester.scapy_execute()
         # time.sleep(2)
@@ -217,12 +219,39 @@ class TestGeneric_flow_api(TestCase):
                 queue_index = len(m) - 1
             curr_queue = int(m[queue_index][len("port 0/queue"):])
             self.verify(int(expect_queue) == curr_queue, "the actual queue doesn't equal to the expected queue.")
-
+        if check_fdir == 'exist':
+            self.verify("RTE_MBUF_F_RX_FDIR" in out_pf, 'FDIR information should be printed.')
+        elif check_fdir == 'non-exist':
+            self.verify("FDIR" not in out_pf, 'FDIR information should not be printed.')
         self.dut.send_expect("start", "testpmd> ")
 
         if self.vf_flag == 1:
             self.session_secondary.send_expect("start", "testpmd> ")
             self.session_third.send_expect("start", "testpmd> ")
+        return out_pf
+
+    def launch_start_testpmd(self, queue='', pkt_filter_mode='', report_hash='', disable_rss=False, fwd='', verbose=''):
+        """
+        Launch and start testpmd
+        """
+        param = ''
+        eal_param = ''
+        if queue:
+            param += '--rxq={} --txq={} '.format(queue, queue)
+        if pkt_filter_mode:
+            param += '--pkt-filter-mode={} '.format(pkt_filter_mode)
+        if disable_rss:
+            param += '--disable-rss '
+        if report_hash:
+            param += '--pkt-filter-report-hash={} '.format(report_hash)
+        self.pmdout.start_testpmd("{}".format(self.cores), param=param, eal_param=eal_param)
+        if fwd:
+            self.pmdout.execute_cmd('set fwd rxonly', )
+        if verbose:
+            self.pmdout.execute_cmd('set verbose 1')
+        self.pmdout.execute_cmd('start')
+        self.pmdout.execute_cmd('show port info all')
+        self.pmdout.wait_link_status_up(self.dut_ports[0])
 
     def compare_memory_rules(self, expectedRules):
         """
@@ -2664,6 +2693,86 @@ class TestGeneric_flow_api(TestCase):
         else:
             self.verify(False, "%s not support this test" % self.nic)
 
+    @check_supported_nic(["niantic"])
+    def test_fdir_for_match_report(self):
+        """
+        Test case: IXGBE fdir for Control levels of FDir match reporting
+        only supported by ixgbe
+        """
+        fdir_scanner = re.compile("FDIR matched hash=(0x\w+) ID=(0x\w+)")
+        pkt0 = 'Ether(dst="{}")/IP(src="192.168.0.1", dst="192.168.0.2")/Raw("x" * 20)'.format(self.pf_mac)
+        pkt1 = 'Ether(dst="{}")/IP(src="192.168.1.1", dst="192.168.1.2")/Raw("x" * 20)'.format(self.pf_mac)
+        rule0 = "flow create 0 ingress pattern eth / ipv4 src is 192.168.0.1 dst is 192.168.0.2 / end actions queue index 1 / mark id 1 / end"
+        rule1 = "flow create 0 ingress pattern eth / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions queue index 2 / mark id 2 / end"
+
+        self.logger.info("Sub-case1: ``--pkt-filter-report-hash=none`` mode")
+        pkt_filter_report_hash = "none"
+        self.launch_start_testpmd(queue=MAX_QUEUE + 1, pkt_filter_mode='perfect', report_hash=pkt_filter_report_hash,
+                                  disable_rss=True, fwd='rxonly', verbose='1')
+
+        # Send the matched packet with Scapy on the traffic generator and check that no FDir information is printed
+        self.sendpkt(pktstr=pkt0)
+        self.verify_result("pf", expect_rxpkts="1", expect_queue="0", verify_mac=self.pf_mac, check_fdir="non-exist")
+
+        # Add flow filter rule, and send the matched packet again.
+        # No FDir information is printed, but it can be seen that the packet went to queue 1
+        self.pmdout.execute_cmd(rule0)
+        self.sendpkt(pktstr=pkt0)
+        self.verify_result("pf", expect_rxpkts="1", expect_queue="1", verify_mac=self.pf_mac, check_fdir="non-exist")
+        self.pmdout.quit()
+
+        self.logger.info("Sub-case2: ``--pkt-filter-report-hash=match`` mode")
+        pkt_filter_report_hash = "match"
+        self.launch_start_testpmd(queue=MAX_QUEUE + 1, pkt_filter_mode='perfect', report_hash=pkt_filter_report_hash,
+                                  disable_rss=True, fwd='rxonly', verbose='1')
+
+        # Send the matched packet with Scapy on the traffic generator and check that no FDir information is printed
+        self.sendpkt(pktstr=pkt0)
+        self.verify_result("pf", expect_rxpkts="1", expect_queue="0", verify_mac=self.pf_mac, check_fdir="non-exist")
+
+        # Add flow filter rule, and send the matched packet again.
+        # the match is indicated (``RTE_MBUF_F_FDIR``), and its details (hash, id) printed
+        self.pmdout.execute_cmd(rule0)
+        self.sendpkt(pktstr=pkt0)
+        self.verify_result("pf", expect_rxpkts="1", expect_queue="1", verify_mac=self.pf_mac, check_fdir="exist")
+
+        # Add flow filter rule by using different scr,dst, and send the matched pkt1 packet again.
+        # the match is indicated (``RTE_MBUF_F_FDIR``), and its details (hash, id) printed
+        self.pmdout.execute_cmd(rule1)
+        self.sendpkt(pktstr=pkt1)
+        self.verify_result("pf", expect_rxpkts="1", expect_queue="2", verify_mac=self.pf_mac, check_fdir="exist")
+
+        # Remove rule1 and send the matched pkt0 packet again. Check that no FDir information is printed
+        self.pmdout.execute_cmd('flow destroy 0 rule 0')
+        self.sendpkt(pktstr=pkt0)
+        self.verify_result("pf", expect_rxpkts="1", expect_queue="0", verify_mac=self.pf_mac, check_fdir="non-exist")
+
+        # Remove rule2, and send the match pkt1 packet again. Check that no FDir information is printed
+        self.pmdout.execute_cmd('flow destroy 0 rule 1')
+        self.sendpkt(pktstr=pkt1)
+        self.verify_result("pf", expect_rxpkts="1", expect_queue="0", verify_mac=self.pf_mac, check_fdir="non-exist")
+        self.pmdout.quit()
+
+        self.logger.info("Sub-case3: ``--pkt-filter-report-hash=always`` mode")
+        pkt_filter_report_hash = "always"
+        self.launch_start_testpmd(queue=MAX_QUEUE + 1, pkt_filter_mode='perfect', report_hash=pkt_filter_report_hash,
+                                  disable_rss=True, fwd='rxonly', verbose='1')
+
+        # Send matched pkt0 packet with Scapy on the traffic generator and check the output (FDIR id=0x0)
+        self.sendpkt(pktstr=pkt0)
+        out1 = self.verify_result("pf", expect_rxpkts="1", expect_queue="0", verify_mac=self.pf_mac, check_fdir="exist")
+
+        # Add flow filter rule, and send the matched pkt0 packet again.
+        # the filter ID is different, and the packet goes to queue 1Add flow filter rule, and send the matched packet again.
+        self.pmdout.execute_cmd(rule0)
+        self.sendpkt(pktstr=pkt0)
+        out2 = self.verify_result("pf", expect_rxpkts="1", expect_queue="1", verify_mac=self.pf_mac, check_fdir="exist")
+
+        # check fdir id is different
+        self.logger.info("FDIR ID1=" + fdir_scanner.search(out1).group(0) + "; FDIR ID2=" + fdir_scanner.search(out2).group(0))
+        self.verify(fdir_scanner.search(out1).group(0) != fdir_scanner.search(out2).group(0),
+                    'Sub-case3.3: FDIR ID should be different')
+
     def tear_down(self):
         """
         Run after each test case.
-- 
2.7.4


^ permalink raw reply	[flat|nested] 6+ messages in thread

* RE: [dts][PATCH V3 3/3] tests/generic_flow_api: add case test_fdir_for_match_report
  2021-11-18  7:17 ` [dts][PATCH V3 3/3] tests/generic_flow_api: add case test_fdir_for_match_report Yu Jiang
@ 2021-11-23  2:33   ` Peng, Yuan
  2021-11-23 14:25     ` Tu, Lijuan
  0 siblings, 1 reply; 6+ messages in thread
From: Peng, Yuan @ 2021-11-23  2:33 UTC (permalink / raw)
  To: Jiang, YuX, dts; +Cc: Peng, Yuan

Acked-by Peng, Yuan <yuan.peng@intel.com>

-----Original Message-----
From: Jiang, YuX <yux.jiang@intel.com> 
Sent: Thursday, November 18, 2021 3:18 PM
To: Peng, Yuan <yuan.peng@intel.com>; dts@dpdk.org
Cc: Jiang, YuX <yux.jiang@intel.com>
Subject: [dts][PATCH V3 3/3] tests/generic_flow_api: add case test_fdir_for_match_report

^ permalink raw reply	[flat|nested] 6+ messages in thread

* RE: [dts][PATCH V3 3/3] tests/generic_flow_api: add case test_fdir_for_match_report
  2021-11-23  2:33   ` Peng, Yuan
@ 2021-11-23 14:25     ` Tu, Lijuan
  0 siblings, 0 replies; 6+ messages in thread
From: Tu, Lijuan @ 2021-11-23 14:25 UTC (permalink / raw)
  To: Peng, Yuan, Jiang, YuX, dts; +Cc: Peng, Yuan



> -----Original Message-----
> From: Peng, Yuan <yuan.peng@intel.com>
> Sent: 2021年11月23日 10:34
> To: Jiang, YuX <yux.jiang@intel.com>; dts@dpdk.org
> Cc: Peng, Yuan <yuan.peng@intel.com>
> Subject: RE: [dts][PATCH V3 3/3] tests/generic_flow_api: add case
> test_fdir_for_match_report
> 
> Acked-by Peng, Yuan <yuan.peng@intel.com>
> 
> -----Original Message-----
> From: Jiang, YuX <yux.jiang@intel.com>
> Sent: Thursday, November 18, 2021 3:18 PM
> To: Peng, Yuan <yuan.peng@intel.com>; dts@dpdk.org
> Cc: Jiang, YuX <yux.jiang@intel.com>
> Subject: [dts][PATCH V3 3/3] tests/generic_flow_api: add case
> test_fdir_for_match_report

Hi Yuan, 
Could you please ack patch with correct string?

Should be: 
Acked-by: Peng, Yuan <yuan.peng@intel.com>

Applied, thanks

^ permalink raw reply	[flat|nested] 6+ messages in thread

end of thread, other threads:[~2021-11-23 14:25 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-11-18  7:17 [dts][PATCH V3 0/3] tests/generic_flow_api: add fdir's case Yu Jiang
2021-11-18  7:17 ` [dts][PATCH V3 1/3] test_plans/fdir: move case:fdir for Control levels of FDir match reporting to generic_flow_api Yu Jiang
2021-11-18  7:17 ` [dts][PATCH V3 2/3] test_plans/generic_flow_api: add case:fdir for Control levels of FDir match reporting Yu Jiang
2021-11-18  7:17 ` [dts][PATCH V3 3/3] tests/generic_flow_api: add case test_fdir_for_match_report Yu Jiang
2021-11-23  2:33   ` Peng, Yuan
2021-11-23 14:25     ` Tu, Lijuan

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).