* [dts] [PATCH 1/2 v1] test_plans/pvp_multi_paths_vhost_single_core_performance: add virtio1.1 inorder path test
@ 2019-04-03 23:07 Yinan
2019-04-03 23:07 ` [dts] [PATCH 2/2 v2] test_plans/pvp_multi_paths_virtio_single_core_performance: " Yinan
0 siblings, 1 reply; 2+ messages in thread
From: Yinan @ 2019-04-03 23:07 UTC (permalink / raw)
To: dts; +Cc: Wang Yinan
From: Wang Yinan <yinan.wang@intel.com>
Signed-off-by: Wang Yinan <yinan.wang@intel.com>
---
...host_single_core_performance_test_plan.rst | 88 ++++++++++---------
1 file changed, 47 insertions(+), 41 deletions(-)
diff --git a/test_plans/pvp_multi_paths_vhost_single_core_performance_test_plan.rst b/test_plans/pvp_multi_paths_vhost_single_core_performance_test_plan.rst
index 247f162..9a8f8e3 100644
--- a/test_plans/pvp_multi_paths_vhost_single_core_performance_test_plan.rst
+++ b/test_plans/pvp_multi_paths_vhost_single_core_performance_test_plan.rst
@@ -30,23 +30,26 @@
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
OF THE POSSIBILITY OF SUCH DAMAGE.
-=======================================
-PVP multi-paths vhost single core Tests
-=======================================
+
+========================================================
+vhost/virtio pvp multi-paths vhost single core test plan
+========================================================
Description
===========
-Benchmark PVP vhost single core performance with 7 TX/RX PATHs.
-Includes Mergeable, Normal, Vector_RX, Inorder mergeable, Inorder
-no-mergeable, Virtio 1.1 mergeable, Virtio 1.1 no-mergeable Path.
-For vhost single core test, give 2 cores for virtio and 1 core for vhost, use io fwd at virtio side to lower the virtio workload.
+Benchmark PVP vhost single core performance with 8 tx/rx paths.
+Includes mergeable, normal, vector_rx, inorder mergeable,
+inorder no-mergeable, virtio 1.1 mergeable, virtio 1.1 inorder, virtio 1.1 normal path.
+Give 2 cores for virtio and 1 core for vhost, set io fwd at virtio side to lower the virtio workload.
-Test Case 1: vhost single core performance test with Virtio 1.1 mergeable path
-==============================================================================
+Test flow
+=========
-flow:
-TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
+TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
+
+Test Case 1: vhost single core performance test with virtio 1.1 mergeable path
+==============================================================================
1. Bind one port to igb_uio, then launch vhost by below command::
@@ -59,18 +62,15 @@ TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
2. Launch virtio-user by below command::
./testpmd -l 7-9 -n 4 --socket-mem 1024,1024 --legacy-mem --file-prefix=virtio \
- --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net,queues=1,packed_vq=1,mrg_rxbuf=1 \
+ --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net,queues=1,packed_vq=1,mrg_rxbuf=1,in_order=0 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --txd=1024 --rxd=1024
>set fwd io
>start
3. Send packet with packet generator with different packet size, check the throughput.
-Test Case 2: vhost single core performance test with Virtio 1.1 no-mergeable path
-=================================================================================
-
-flow:
-TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
+Test Case 2: vhost single core performance test with virtio 1.1 normal path
+===========================================================================
1. Bind one port to igb_uio, then launch vhost by below command::
@@ -83,19 +83,16 @@ TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
2. Launch virtio-user by below command::
./testpmd -l 7-9 -n 4 --socket-mem 1024,1024 --legacy-mem --file-prefix=virtio \
- --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net,queues=1,packed_vq=1,mrg_rxbuf=0 \
+ --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net,queues=1,packed_vq=1,mrg_rxbuf=0,in_order=0 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --txd=1024 --rxd=1024
>set fwd io
>start
3. Send packet with packet generator with different packet size, check the throughput.
-Test Case 3: vhost single core performance test with Inorder mergeable path
+Test Case 3: vhost single core performance test with inorder mergeable path
===========================================================================
-flow:
-TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
-
1. Bind one port to igb_uio, then launch vhost by below command::
rm -rf vhost-net*
@@ -114,12 +111,9 @@ TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
3. Send packet with packet generator with different packet size, check the throughput.
-Test Case 4: vhost single core performance test with Inorder no-mergeable path
+Test Case 4: vhost single core performance test with inorder no-mergeable path
==============================================================================
-flow:
-TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
-
1. Bind one port to igb_uio, then launch vhost by below command::
rm -rf vhost-net*
@@ -138,11 +132,8 @@ TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
3. Send packet with packet generator with different packet size, check the throughput.
-Test Case 5: vhost single core performance test with Mergeable path
-=======================================================================
-
-flow:
-TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
+Test Case 5: vhost single core performance test with mergeable path
+===================================================================
1. Bind one port to igb_uio, then launch vhost by below command::
@@ -162,11 +153,8 @@ TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
3. Send packet with packet generator with different packet size, check the throughput.
-Test Case 6: vhost single core performance test with Normal path
-=======================================================================
-
-flow:
-TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
+Test Case 6: vhost single core performance test with normal path
+================================================================
1. Bind one port to igb_uio, then launch vhost by below command::
@@ -186,11 +174,8 @@ TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
3. Send packet with packet generator with different packet size, check the throughput.
-Test Case 7: vhost single core performance test with Vector_RX path
-=======================================================================
-
-flow:
-TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
+Test Case 7: vhost single core performance test with vector_rx path
+===================================================================
1. Bind one port to igb_uio, then launch vhost by below command::
@@ -209,3 +194,24 @@ TG --> NIC --> Virtio --> Vhost --> Virtio --> NIC --> TG
>start
3. Send packet with packet generator with different packet size, check the throughput.
+
+Test Case 8: vhost single core performance test with virtio 1.1 inorder path
+============================================================================
+
+1. Bind one port to igb_uio, then launch vhost by below command::
+
+ rm -rf vhost-net*
+ ./testpmd -l 3-4 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+2. Launch virtio-user by below command::
+
+ ./testpmd -l 7-9 -n 4 --socket-mem 1024,1024 --legacy-mem --file-prefix=virtio \
+ --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net,queues=1,packed_vq=1,mrg_rxbuf=0,in_order=1 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --txd=1024 --rxd=1024
+ >set fwd io
+ >start
+
+3. Send packet with packet generator with different packet size, check the throughput.
--
2.17.1
^ permalink raw reply [flat|nested] 2+ messages in thread
* [dts] [PATCH 2/2 v2] test_plans/pvp_multi_paths_virtio_single_core_performance: add virtio1.1 inorder path test
2019-04-03 23:07 [dts] [PATCH 1/2 v1] test_plans/pvp_multi_paths_vhost_single_core_performance: add virtio1.1 inorder path test Yinan
@ 2019-04-03 23:07 ` Yinan
0 siblings, 0 replies; 2+ messages in thread
From: Yinan @ 2019-04-03 23:07 UTC (permalink / raw)
To: dts; +Cc: Wang Yinan
From: Wang Yinan <yinan.wang@intel.com>
Signed-off-by: Wang Yinan <yinan.wang@intel.com>
---
...rtio_single_core_performance_test_plan.rst | 80 ++++++++++---------
1 file changed, 43 insertions(+), 37 deletions(-)
diff --git a/test_plans/pvp_multi_paths_virtio_single_core_performance_test_plan.rst b/test_plans/pvp_multi_paths_virtio_single_core_performance_test_plan.rst
index 5c64d5d..e26794d 100644
--- a/test_plans/pvp_multi_paths_virtio_single_core_performance_test_plan.rst
+++ b/test_plans/pvp_multi_paths_virtio_single_core_performance_test_plan.rst
@@ -30,24 +30,26 @@
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
OF THE POSSIBILITY OF SUCH DAMAGE.
-========================================
-PVP multi-paths virtio single core Tests
-========================================
+=========================================================
+vhost/virtio pvp multi-paths virtio single core test plan
+=========================================================
Description
===========
-Benchmark PVP virtio single core performance with 7 TX/RX PATHs.
-Includes Mergeable, Normal, Vector_RX, Inorder mergeable, Inorder
-no-mergeable, Virtio 1.1 mergeable, Virtio 1.1 no-mergeable Path.
-For virtio single core test,give 2 cores for vhost and 1 core for virtio, use io fwd at vhost side to lower the vhost workload.
+Benchmark pvp virtio single core performance with 8 tx/rx paths.
+Includes mergeable, normal, vector_rx, inorder mergeable,
+inorder no-mergeable, virtio 1.1 mergeable, virtio 1.1 inorder, virtio 1.1 normal path.
+Give 2 cores for vhost and 1 core for virtio, set io fwd at vhost side to lower the vhost workload.
-Test Case 1: virtio single core performance test with Virtio 1.1 mergeable path
-===============================================================================
+Test flow
+=========
-flow:
TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
+Test Case 1: virtio single core performance test with virtio 1.1 mergeable path
+===============================================================================
+
1. Bind one port to igb_uio, then launch vhost by below command::
rm -rf vhost-net*
@@ -60,18 +62,15 @@ TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
--legacy-mem --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_vq=1,mrg_rxbuf=1 \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_vq=1,mrg_rxbuf=1,in_order=0 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
>set fwd mac
>start
3. Send packet with packet generator with different packet size, check the throughput.
-Test Case 2: virtio single core performance test with Virtio 1.1 no-mergeable path
-==================================================================================
-
-flow:
-TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
+Test Case 2: virtio single core performance test with virtio 1.1 normal path
+============================================================================
1. Bind one port to igb_uio, then launch vhost by below command::
@@ -85,19 +84,16 @@ TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
--legacy-mem --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_vq=1,mrg_rxbuf=0 \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_vq=1,mrg_rxbuf=0,in_order=0 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
>set fwd mac
>start
3. Send packet with packet generator with different packet size, check the throughput.
-Test Case 3: virtio single core performance test with Inorder mergeable path
+Test Case 3: virtio single core performance test with inorder mergeable path
============================================================================
-flow:
-TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
-
1. Bind one port to igb_uio, then launch vhost by below command::
rm -rf vhost-net*
@@ -117,12 +113,9 @@ TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
3. Send packet with packet generator with different packet size, check the throughput.
-Test Case 4: virtio single core performance test with Inorder no-mergeable path
+Test Case 4: virtio single core performance test with inorder no-mergeable path
===============================================================================
-flow:
-TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
-
1. Bind one port to igb_uio, then launch vhost by below command::
rm -rf vhost-net*
@@ -142,12 +135,9 @@ TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
3. Send packet with packet generator with different packet size, check the throughput.
-Test Case 5: virtio single core performance test with Mergeable path
+Test Case 5: virtio single core performance test with mergeable path
====================================================================
-flow:
-TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
-
1. Bind one port to igb_uio, then launch vhost by below command::
rm -rf vhost-net*
@@ -167,12 +157,9 @@ TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
3. Send packet with packet generator with different packet size, check the throughput.
-Test Case 6: virtio single core performance test with Normal path
+Test Case 6: virtio single core performance test with normal path
=================================================================
-flow:
-TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
-
1. Bind one port to igb_uio, then launch vhost by below command::
rm -rf vhost-net*
@@ -192,12 +179,9 @@ TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
3. Send packet with packet generator with different packet size, check the throughput.
-Test Case 7: virtio single core performance test with Vector_RX path
+Test Case 7: virtio single core performance test with vector_rx path
====================================================================
-flow:
-TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
-
1. Bind one port to igb_uio, then launch vhost by below command::
rm -rf vhost-net*
@@ -216,3 +200,25 @@ TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
>start
3. Send packet with packet generator with different packet size, check the throughput.
+
+Test Case 8: virtio single core performance test with virtio 1.1 inorder path
+=============================================================================
+
+1. Bind one port to igb_uio, then launch vhost by below command::
+
+ rm -rf vhost-net*
+ ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
+ --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=2 --txd=1024 --rxd=1024
+ testpmd>set fwd io
+ testpmd>start
+
+2. Launch virtio-user by below command::
+
+ ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
+ --legacy-mem --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_vq=1,mrg_rxbuf=0,in_order=1 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
+ >set fwd mac
+ >start
+
+3. Send packet with packet generator with different packet size, check the throughput.
--
2.17.1
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-04-04 6:09 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-04-03 23:07 [dts] [PATCH 1/2 v1] test_plans/pvp_multi_paths_vhost_single_core_performance: add virtio1.1 inorder path test Yinan
2019-04-03 23:07 ` [dts] [PATCH 2/2 v2] test_plans/pvp_multi_paths_virtio_single_core_performance: " Yinan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).