* [dts] [PATCH v1] test_plans/loopback_multi_paths_port_restart: add loopback with eight paths and port restart test
@ 2019-04-16 0:57 Yinan
2019-04-16 23:26 ` Tu, Lijuan
0 siblings, 1 reply; 2+ messages in thread
From: Yinan @ 2019-04-16 0:57 UTC (permalink / raw)
To: dts; +Cc: Wang Yinan
From: Wang Yinan <yinan.wang@intel.com>
---
...ack_multi_paths_port_restart_test_plan.rst | 187 ++++++++++++------
1 file changed, 124 insertions(+), 63 deletions(-)
diff --git a/test_plans/loopback_multi_paths_port_restart_test_plan.rst b/test_plans/loopback_multi_paths_port_restart_test_plan.rst
index 115a5e8..5220c91 100644
--- a/test_plans/loopback_multi_paths_port_restart_test_plan.rst
+++ b/test_plans/loopback_multi_paths_port_restart_test_plan.rst
@@ -30,35 +30,33 @@
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
OF THE POSSIBILITY OF SUCH DAMAGE.
-===========================================
-Loopback multi-paths and port restart Tests
-===========================================
+=================================================================
+vhost/virtio loopback with multi-paths and port restart test plan
+=================================================================
Description
===========
-Benchmark vhost/virtio-user loopback test with 7 RX/TX PATHs.
-Includes Mergeable, Normal, Vector_RX, Inorder mergeable,
-Inorder no-mergeable, Virtio 1.1 mergeable, Virtio 1.1 no-mergeable Path.
+Benchmark vhost/virtio-user loopback test with 8 rx/tx paths.
+Includes mergeable, normal, vector_rx, inorder mergeable,
+inorder no-mergeable, virtio 1.1 mergeable, virtio 1.1 inorder, virtio 1.1 normal path.
Also cover port restart test with each path.
-
-
-Test Case 1:loopback test with Virtio 1.1 mergeable path
-===========================================================================
+Test Case 1: loopback test with virtio 1.1 mergeable path
+=========================================================
1. Launch vhost by below command::
rm -rf vhost-net*
./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem --no-pci \
--file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
- >set fwd mac
+ testpmd>set fwd mac
2. Launch virtio-user by below command::
./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
--legacy-mem --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_vq=1,mrg_rxbuf=1 \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_vq=1,mrg_rxbuf=1,in_order=0 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
>set fwd mac
>start
@@ -67,35 +65,38 @@ Test Case 1:loopback test with Virtio 1.1 mergeable path
testpmd>set txpkts [frame_size]
testpmd>start tx_first 32
- testpmd>start
4. Repeat below command to get throughput 10 times,then calculate the average throughput::
testpmd>show port stats all
-5. Port restart by below command and re-calculate the average througnput::
+5. Stop port at vhost side by below command and re-calculate the average throughput,verify the throughput is zero after port stop::
testpmd>stop
- testpmd>clear port stats all
- testpmd>start
+ testpmd>port stop 0
testpmd>show port stats all
+6. Restart port at vhost side by below command and re-calculate the average throughput,verify the throughput is not zero after port restart::
+
+ testpmd>port start 0
+ testpmd>start tx_first 32
+ testpmd>show port stats all
-Test Case 2: loopback test with Virtio 1.1 no-mergeable path
-===========================================================================
+Test Case 2: loopback test with virtio 1.1 normal path
+======================================================
1. Launch vhost by below command::
rm -rf vhost-net*
./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem --no-pci \
--file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
- >set fwd mac
+ testpmd>set fwd mac
2. Launch virtio-user by below command::
./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
--legacy-mem --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_vq=1,mrg_rxbuf=0 \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_vq=1,mrg_rxbuf=0,in_order=0 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
>set fwd mac
>start
@@ -104,34 +105,38 @@ Test Case 2: loopback test with Virtio 1.1 no-mergeable path
testpmd>set txpkts [frame_size]
testpmd>start tx_first 32
- testpmd>start
4. Get throughput 10 times and calculate the average throughput::
testpmd>show port stats all
-5. Port restart by below command and re-calculate the average througnput::
+5. Stop port at vhost side by below command and re-calculate the average throughput,verify the throughput is zero after port stop::
testpmd>stop
- testpmd>clear port stats all
- testpmd>start
+ testpmd>port stop 0
testpmd>show port stats all
-Test Case 3: loopback test with Inorder mergeable path
-===========================================================================
+6. Restart port at vhost side by below command and re-calculate the average throughput,verify the throughput is not zero after port restart::
+
+ testpmd>port start 0
+ testpmd>start tx_first 32
+ testpmd>show port stats all
+
+Test Case 3: loopback test with virtio 1.1 inorder path
+=======================================================
1. Launch vhost by below command::
rm -rf vhost-net*
./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem --no-pci \
--file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
- >set fwd mac
+ testpmd>set fwd mac
2. Launch virtio-user by below command::
./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
--legacy-mem --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,in_order=1 \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_vq=1,in_order=1,mrg_rxbuf=0 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
>set fwd mac
>start
@@ -140,28 +145,72 @@ Test Case 3: loopback test with Inorder mergeable path
testpmd>set txpkts [frame_size]
testpmd>start tx_first 32
- testpmd>start
4. Get throughput 10 times and calculate the average throughput::
testpmd>show port stats all
-5. Port restart by below command and re-calculate the average througnput::
+5. Stop port at vhost side by below command and re-calculate the average throughput,verify the throughput is zero after port stop::
testpmd>stop
- testpmd>clear port stats all
- testpmd>start
+ testpmd>port stop 0
testpmd>show port stats all
-Test Case 4: loopback test with Inorder no-mergeable path
-===========================================================================
+6. Restart port at vhost side by below command and re-calculate the average throughput,verify the throughput is not zero after port restart::
+
+ testpmd>port start 0
+ testpmd>start tx_first 32
+ testpmd>show port stats all
+
+Test Case 4: loopback test with inorder mergeable path
+======================================================
1. Launch vhost by below command::
rm -rf vhost-net*
./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem --no-pci \
--file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+
+2. Launch virtio-user by below command::
+
+ ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
+ --legacy-mem --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,in_order=1,mrg_rxbuf=1 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
>set fwd mac
+ >start
+
+3. Send packets with vhost-testpmd,[frame_size] is the parameter changs in [64, 128, 256, 512, 1024, 1518]::
+
+ testpmd>set txpkts [frame_size]
+ testpmd>start tx_first 32
+
+4. Get throughput 10 times and calculate the average throughput::
+
+ testpmd>show port stats all
+
+5. Stop port at vhost side by below command and re-calculate the average throughput,verify the throughput is zero after port stop::
+
+ testpmd>stop
+ testpmd>port stop 0
+ testpmd>show port stats all
+
+6. Restart port at vhost side by below command and re-calculate the average throughput,verify the throughput is not zero after port restart::
+
+ testpmd>port start 0
+ testpmd>start tx_first 32
+ testpmd>show port stats all
+
+Test Case 5: loopback test with inorder no-mergeable path
+=========================================================
+
+1. Launch vhost by below command::
+
+ rm -rf vhost-net*
+ ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem --no-pci \
+ --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
2. Launch virtio-user by below command::
@@ -176,28 +225,32 @@ Test Case 4: loopback test with Inorder no-mergeable path
testpmd>set txpkts [frame_size]
testpmd>start tx_first 32
- testpmd>start
4. Get throughput 10 times and calculate the average throughput::
testpmd>show port stats all
-5. Port restart by below command and re-calculate the average througnput::
+5. Stop port at vhost side by below command and re-calculate the average throughput,verify the throughput is zero after port stop::
testpmd>stop
- testpmd>clear port stats all
- testpmd>start
+ testpmd>port stop 0
+ testpmd>show port stats all
+
+6. Restart port at vhost side by below command and re-calculate the average throughput,verify the throughput is not zero after port restart::
+
+ testpmd>port start 0
+ testpmd>start tx_first 32
testpmd>show port stats all
-Test Case 5: loopback test with Mergeable path
-===========================================================================
+Test Case 6: loopback test with mergeable path
+==============================================
1. Launch vhost by below command::
rm -rf vhost-net*
./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem --no-pci \
--file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
- >set fwd mac
+ testpmd>set fwd mac
2. Launch virtio-user by below command::
@@ -212,33 +265,32 @@ Test Case 5: loopback test with Mergeable path
testpmd>set txpkts [frame_size]
testpmd>start tx_first 32
- testpmd>start
4. Get throughput 10 times and calculate the average throughput::
testpmd>show port stats all
-5. Port restart 100 times by below command and re-calculate the average througnput::
+5. Port restart at vhost side 100 times by below command and re-calculate the average throughput,verify the throughput is not zero after port restart::
testpmd>stop
- testpmd>start
+ testpmd>port stop 0
+ testpmd>port start 0
...
testpmd>stop
- testpmd>clear port stats all
- testpmd>start
+ testpmd>port stop 0
+ testpmd>port start 0
+ testpmd>start tx_first 32
testpmd>show port stats all
-
-
-Test Case 6: loopback test with Normal path
-===========================================================================
+Test Case 7: loopback test with normal path
+===========================================
1. Launch vhost by below command::
rm -rf vhost-net*
./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem --no-pci \
--file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
- >set fwd mac
+ testpmd>set fwd mac
2. Launch virtio-user by below command::
@@ -253,28 +305,32 @@ Test Case 6: loopback test with Normal path
testpmd>set txpkts [frame_size]
testpmd>start tx_first 32
- testpmd>start
4. Get throughput 10 times and calculate the average throughput::
testpmd>show port stats all
-5. Port restart by below command and re-calculate the average througnput::
+5. Stop port at vhost side by below command and re-calculate the average throughput,verify the throughput is zero after port stop::
testpmd>stop
- testpmd>clear port stats all
- testpmd>start
+ testpmd>port stop 0
testpmd>show port stats all
-Test Case 7: loopback test with Vector_RX path
-===========================================================================
+6. Restart port at vhost side by below command and re-calculate the average throughput,verify the throughput is not zero after port restart::
+
+ testpmd>port start 0
+ testpmd>start tx_first 32
+ testpmd>show port stats all
+
+Test Case 8: loopback test with vector_rx path
+==============================================
1. Launch vhost by below command::
rm -rf vhost-net*
./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem --no-pci \
--file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
- >set fwd mac
+ testpmd>set fwd mac
2. Launch virtio-user by below command::
@@ -289,15 +345,20 @@ Test Case 7: loopback test with Vector_RX path
testpmd>set txpkts [frame_size]
testpmd>start tx_first 32
- testpmd>start
4. Get throughput 10 times and calculate the average throughput::
testpmd>show port stats all
-5. Port restart by below command and re-calculate the average througnput::
+5. Stop port at vhost side by below command and re-calculate the average throughput,verify the throughput is zero after port stop::
testpmd>stop
- testpmd>clear port stats all
- testpmd>start
- testpmd>show port stats all
\ No newline at end of file
+ testpmd>port stop 0
+ testpmd>show port stats all
+
+6. Restart port at vhost side by below command and re-calculate the average throughput,verify the throughput is not zero after port restart::
+
+ testpmd>port start 0
+ testpmd>start tx_first 32
+ testpmd>show port stats all
+
--
2.17.1
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [dts] [PATCH v1] test_plans/loopback_multi_paths_port_restart: add loopback with eight paths and port restart test
2019-04-16 0:57 [dts] [PATCH v1] test_plans/loopback_multi_paths_port_restart: add loopback with eight paths and port restart test Yinan
@ 2019-04-16 23:26 ` Tu, Lijuan
0 siblings, 0 replies; 2+ messages in thread
From: Tu, Lijuan @ 2019-04-16 23:26 UTC (permalink / raw)
To: Wang, Yinan, dts; +Cc: Wang, Yinan
.git/rebase-apply/patch:27: trailing whitespace.
Includes mergeable, normal, vector_rx, inorder mergeable,
.git/rebase-apply/patch:75: trailing whitespace.
.git/rebase-apply/patch:124: trailing whitespace.
.git/rebase-apply/patch:171: trailing whitespace.
.git/rebase-apply/patch:211: trailing whitespace.
> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of Yinan
> Sent: Monday, April 15, 2019 5:57 PM
> To: dts@dpdk.org
> Cc: Wang, Yinan <yinan.wang@intel.com>
> Subject: [dts] [PATCH v1] test_plans/loopback_multi_paths_port_restart:
> add loopback with eight paths and port restart test
>
> From: Wang Yinan <yinan.wang@intel.com>
>
> ---
> ...ack_multi_paths_port_restart_test_plan.rst | 187 ++++++++++++------
> 1 file changed, 124 insertions(+), 63 deletions(-)
>
> diff --git a/test_plans/loopback_multi_paths_port_restart_test_plan.rst
> b/test_plans/loopback_multi_paths_port_restart_test_plan.rst
> index 115a5e8..5220c91 100644
> --- a/test_plans/loopback_multi_paths_port_restart_test_plan.rst
> +++ b/test_plans/loopback_multi_paths_port_restart_test_plan.rst
> @@ -30,35 +30,33 @@
> ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
> ADVISED
> OF THE POSSIBILITY OF SUCH DAMAGE.
>
> -===========================================
> -Loopback multi-paths and port restart Tests -
> ===========================================
> +===============================================================
> ==
> +vhost/virtio loopback with multi-paths and port restart test plan
> +===============================================================
> ==
>
> Description
> ===========
>
> -Benchmark vhost/virtio-user loopback test with 7 RX/TX PATHs.
> -Includes Mergeable, Normal, Vector_RX, Inorder mergeable, -Inorder no-
> mergeable, Virtio 1.1 mergeable, Virtio 1.1 no-mergeable Path.
> +Benchmark vhost/virtio-user loopback test with 8 rx/tx paths.
> +Includes mergeable, normal, vector_rx, inorder mergeable, inorder
> +no-mergeable, virtio 1.1 mergeable, virtio 1.1 inorder, virtio 1.1 normal
> path.
> Also cover port restart test with each path.
>
> -
> -
> -Test Case 1:loopback test with Virtio 1.1 mergeable path -
> ================================================================
> ===========
> +Test Case 1: loopback test with virtio 1.1 mergeable path
> +=========================================================
>
> 1. Launch vhost by below command::
>
> rm -rf vhost-net*
> ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem --no-pci \
> --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' --
> -i --nb-cores=1 --txd=1024 --rxd=1024
> - >set fwd mac
> + testpmd>set fwd mac
>
> 2. Launch virtio-user by below command::
>
> ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
> --legacy-mem --no-pci --file-prefix=virtio \
> - --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,packed_vq=1,mrg_rxbuf=1 \
> +
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_
> + vq=1,mrg_rxbuf=1,in_order=0 \
> -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --
> txd=1024 --rxd=1024
> >set fwd mac
> >start
> @@ -67,35 +65,38 @@ Test Case 1:loopback test with Virtio 1.1 mergeable
> path
>
> testpmd>set txpkts [frame_size]
> testpmd>start tx_first 32
> - testpmd>start
>
> 4. Repeat below command to get throughput 10 times,then calculate the
> average throughput::
>
> testpmd>show port stats all
>
> -5. Port restart by below command and re-calculate the average througnput::
> +5. Stop port at vhost side by below command and re-calculate the average
> throughput,verify the throughput is zero after port stop::
>
> testpmd>stop
> - testpmd>clear port stats all
> - testpmd>start
> + testpmd>port stop 0
> testpmd>show port stats all
>
> +6. Restart port at vhost side by below command and re-calculate the
> average throughput,verify the throughput is not zero after port restart::
> +
> + testpmd>port start 0
> + testpmd>start tx_first 32
> + testpmd>show port stats all
>
> -Test Case 2: loopback test with Virtio 1.1 no-mergeable path -
> ================================================================
> ===========
> +Test Case 2: loopback test with virtio 1.1 normal path
> +======================================================
>
> 1. Launch vhost by below command::
>
> rm -rf vhost-net*
> ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem --no-pci \
> --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' --
> -i --nb-cores=1 --txd=1024 --rxd=1024
> - >set fwd mac
> + testpmd>set fwd mac
>
> 2. Launch virtio-user by below command::
>
> ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
> --legacy-mem --no-pci --file-prefix=virtio \
> - --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,packed_vq=1,mrg_rxbuf=0 \
> +
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_
> + vq=1,mrg_rxbuf=0,in_order=0 \
> -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --
> txd=1024 --rxd=1024
> >set fwd mac
> >start
> @@ -104,34 +105,38 @@ Test Case 2: loopback test with Virtio 1.1 no-
> mergeable path
>
> testpmd>set txpkts [frame_size]
> testpmd>start tx_first 32
> - testpmd>start
>
> 4. Get throughput 10 times and calculate the average throughput::
>
> testpmd>show port stats all
>
> -5. Port restart by below command and re-calculate the average througnput::
> +5. Stop port at vhost side by below command and re-calculate the average
> throughput,verify the throughput is zero after port stop::
>
> testpmd>stop
> - testpmd>clear port stats all
> - testpmd>start
> + testpmd>port stop 0
> testpmd>show port stats all
>
> -Test Case 3: loopback test with Inorder mergeable path -
> ================================================================
> ===========
> +6. Restart port at vhost side by below command and re-calculate the
> average throughput,verify the throughput is not zero after port restart::
> +
> + testpmd>port start 0
> + testpmd>start tx_first 32
> + testpmd>show port stats all
> +
> +Test Case 3: loopback test with virtio 1.1 inorder path
> +=======================================================
>
> 1. Launch vhost by below command::
>
> rm -rf vhost-net*
> ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem --no-pci \
> --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' --
> -i --nb-cores=1 --txd=1024 --rxd=1024
> - >set fwd mac
> + testpmd>set fwd mac
>
> 2. Launch virtio-user by below command::
>
> ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
> --legacy-mem --no-pci --file-prefix=virtio \
> - --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,in_order=1 \
> +
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_
> + vq=1,in_order=1,mrg_rxbuf=0 \
> -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --
> txd=1024 --rxd=1024
> >set fwd mac
> >start
> @@ -140,28 +145,72 @@ Test Case 3: loopback test with Inorder mergeable
> path
>
> testpmd>set txpkts [frame_size]
> testpmd>start tx_first 32
> - testpmd>start
>
> 4. Get throughput 10 times and calculate the average throughput::
>
> testpmd>show port stats all
>
> -5. Port restart by below command and re-calculate the average througnput::
> +5. Stop port at vhost side by below command and re-calculate the average
> throughput,verify the throughput is zero after port stop::
>
> testpmd>stop
> - testpmd>clear port stats all
> - testpmd>start
> + testpmd>port stop 0
> testpmd>show port stats all
>
> -Test Case 4: loopback test with Inorder no-mergeable path -
> ================================================================
> ===========
> +6. Restart port at vhost side by below command and re-calculate the
> average throughput,verify the throughput is not zero after port restart::
> +
> + testpmd>port start 0
> + testpmd>start tx_first 32
> + testpmd>show port stats all
> +
> +Test Case 4: loopback test with inorder mergeable path
> +======================================================
>
> 1. Launch vhost by below command::
>
> rm -rf vhost-net*
> ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem --no-pci \
> --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' --
> -i --nb-cores=1 --txd=1024 --rxd=1024
> + testpmd>set fwd mac
> +
> +2. Launch virtio-user by below command::
> +
> + ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
> + --legacy-mem --no-pci --file-prefix=virtio \
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,in_order=1,mrg_rxbuf=1 \
> + -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip
> + --nb-cores=1 --txd=1024 --rxd=1024
> >set fwd mac
> + >start
> +
> +3. Send packets with vhost-testpmd,[frame_size] is the parameter changs in
> [64, 128, 256, 512, 1024, 1518]::
> +
> + testpmd>set txpkts [frame_size]
> + testpmd>start tx_first 32
> +
> +4. Get throughput 10 times and calculate the average throughput::
> +
> + testpmd>show port stats all
> +
> +5. Stop port at vhost side by below command and re-calculate the average
> throughput,verify the throughput is zero after port stop::
> +
> + testpmd>stop
> + testpmd>port stop 0
> + testpmd>show port stats all
> +
> +6. Restart port at vhost side by below command and re-calculate the
> average throughput,verify the throughput is not zero after port restart::
> +
> + testpmd>port start 0
> + testpmd>start tx_first 32
> + testpmd>show port stats all
> +
> +Test Case 5: loopback test with inorder no-mergeable path
> +=========================================================
> +
> +1. Launch vhost by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem --no-pci \
> + --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -
> - -i --nb-cores=1 --txd=1024 --rxd=1024
> + testpmd>set fwd mac
>
> 2. Launch virtio-user by below command::
>
> @@ -176,28 +225,32 @@ Test Case 4: loopback test with Inorder no-
> mergeable path
>
> testpmd>set txpkts [frame_size]
> testpmd>start tx_first 32
> - testpmd>start
>
> 4. Get throughput 10 times and calculate the average throughput::
>
> testpmd>show port stats all
>
> -5. Port restart by below command and re-calculate the average througnput::
> +5. Stop port at vhost side by below command and re-calculate the average
> throughput,verify the throughput is zero after port stop::
>
> testpmd>stop
> - testpmd>clear port stats all
> - testpmd>start
> + testpmd>port stop 0
> + testpmd>show port stats all
> +
> +6. Restart port at vhost side by below command and re-calculate the
> average throughput,verify the throughput is not zero after port restart::
> +
> + testpmd>port start 0
> + testpmd>start tx_first 32
> testpmd>show port stats all
>
> -Test Case 5: loopback test with Mergeable path -
> ================================================================
> ===========
> +Test Case 6: loopback test with mergeable path
> +==============================================
>
> 1. Launch vhost by below command::
>
> rm -rf vhost-net*
> ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem --no-pci \
> --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' --
> -i --nb-cores=1 --txd=1024 --rxd=1024
> - >set fwd mac
> + testpmd>set fwd mac
>
> 2. Launch virtio-user by below command::
>
> @@ -212,33 +265,32 @@ Test Case 5: loopback test with Mergeable path
>
> testpmd>set txpkts [frame_size]
> testpmd>start tx_first 32
> - testpmd>start
>
> 4. Get throughput 10 times and calculate the average throughput::
>
> testpmd>show port stats all
>
> -5. Port restart 100 times by below command and re-calculate the average
> througnput::
> +5. Port restart at vhost side 100 times by below command and re-calculate
> the average throughput,verify the throughput is not zero after port restart::
>
> testpmd>stop
> - testpmd>start
> + testpmd>port stop 0
> + testpmd>port start 0
> ...
> testpmd>stop
> - testpmd>clear port stats all
> - testpmd>start
> + testpmd>port stop 0
> + testpmd>port start 0
> + testpmd>start tx_first 32
> testpmd>show port stats all
>
> -
> -
> -Test Case 6: loopback test with Normal path -
> ================================================================
> ===========
> +Test Case 7: loopback test with normal path
> +===========================================
>
> 1. Launch vhost by below command::
>
> rm -rf vhost-net*
> ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem --no-pci \
> --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' --
> -i --nb-cores=1 --txd=1024 --rxd=1024
> - >set fwd mac
> + testpmd>set fwd mac
>
> 2. Launch virtio-user by below command::
>
> @@ -253,28 +305,32 @@ Test Case 6: loopback test with Normal path
>
> testpmd>set txpkts [frame_size]
> testpmd>start tx_first 32
> - testpmd>start
>
> 4. Get throughput 10 times and calculate the average throughput::
>
> testpmd>show port stats all
>
> -5. Port restart by below command and re-calculate the average througnput::
> +5. Stop port at vhost side by below command and re-calculate the average
> throughput,verify the throughput is zero after port stop::
>
> testpmd>stop
> - testpmd>clear port stats all
> - testpmd>start
> + testpmd>port stop 0
> testpmd>show port stats all
>
> -Test Case 7: loopback test with Vector_RX path -
> ================================================================
> ===========
> +6. Restart port at vhost side by below command and re-calculate the
> average throughput,verify the throughput is not zero after port restart::
> +
> + testpmd>port start 0
> + testpmd>start tx_first 32
> + testpmd>show port stats all
> +
> +Test Case 8: loopback test with vector_rx path
> +==============================================
>
> 1. Launch vhost by below command::
>
> rm -rf vhost-net*
> ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem --no-pci \
> --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' --
> -i --nb-cores=1 --txd=1024 --rxd=1024
> - >set fwd mac
> + testpmd>set fwd mac
>
> 2. Launch virtio-user by below command::
>
> @@ -289,15 +345,20 @@ Test Case 7: loopback test with Vector_RX path
>
> testpmd>set txpkts [frame_size]
> testpmd>start tx_first 32
> - testpmd>start
>
> 4. Get throughput 10 times and calculate the average throughput::
>
> testpmd>show port stats all
>
> -5. Port restart by below command and re-calculate the average througnput::
> +5. Stop port at vhost side by below command and re-calculate the average
> throughput,verify the throughput is zero after port stop::
>
> testpmd>stop
> - testpmd>clear port stats all
> - testpmd>start
> - testpmd>show port stats all
> \ No newline at end of file
> + testpmd>port stop 0
> + testpmd>show port stats all
> +
> +6. Restart port at vhost side by below command and re-calculate the
> average throughput,verify the throughput is not zero after port restart::
> +
> + testpmd>port start 0
> + testpmd>start tx_first 32
> + testpmd>show port stats all
> +
> --
> 2.17.1
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-04-16 23:26 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-04-16 0:57 [dts] [PATCH v1] test_plans/loopback_multi_paths_port_restart: add loopback with eight paths and port restart test Yinan
2019-04-16 23:26 ` Tu, Lijuan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).