test suite reviews and discussions
 help / color / mirror / Atom feed
* [dts] [PATCH v1] test_plans: add test plan for virtio_user_as_exceptional_path test
@ 2019-06-17 19:08 Yinan
  2019-06-26  7:21 ` Tu, Lijuan
  0 siblings, 1 reply; 2+ messages in thread
From: Yinan @ 2019-06-17 19:08 UTC (permalink / raw)
  To: dts; +Cc: Wang Yinan

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=y, Size: 8338 bytes --]

From: Wang Yinan <yinan.wang@intel.com>

Signed-off-by: Wang Yinan <yinan.wang@intel.com>
---
 .../virtio_user_as_exceptional_path.rst       | 176 ++++++++++++++++++
 1 file changed, 176 insertions(+)
 create mode 100644 test_plans/virtio_user_as_exceptional_path.rst

diff --git a/test_plans/virtio_user_as_exceptional_path.rst b/test_plans/virtio_user_as_exceptional_path.rst
new file mode 100644
index 0000000..ef6e4a8
--- /dev/null
+++ b/test_plans/virtio_user_as_exceptional_path.rst
@@ -0,0 +1,176 @@
+.. Copyright (c) <2019>, Intel Corporation
+   All rights reserved.
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+
+   - Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+
+   - Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in
+     the documentation and/or other materials provided with the
+     distribution.
+
+   - Neither the name of Intel Corporation nor the names of its
+     contributors may be used to endorse or promote products derived
+     from this software without specific prior written permission.
+
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+   FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+   COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+   INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+   SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+   STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+   OF THE POSSIBILITY OF SUCH DAMAGE.
+
+============================================
+Virtio_user as an exceptional path test plan
+============================================
+
+This test plan will test exceptional path with virtio_user and measure throughput by iperf.
+
+Prerequisites
+=============
+
+Modify the testpmd code as following::
+
+    --- a/app/test-pmd/csumonly.c
+    +++ b/app/test-pmd/csumonly.c
+    @@ -693,10 +693,12 @@ pkt_burst_checksum_forward(struct fwd_stream *fs)
+                     * and inner headers */
+                    eth_hdr = rte_pktmbuf_mtod(m, struct ether_hdr *);
+    +#if 0
+                    ether_addr_copy(&peer_eth_addrs[fs->peer_addr],
+                                    &eth_hdr->d_addr);
+                    ether_addr_copy(&ports[fs->tx_port].eth_addr,
+                                    &eth_hdr->s_addr);
+    +#endif
+                    parse_ethernet(eth_hdr, &info);
+                    l3_hdr = (char *)eth_hdr + info.l2_len;
+
+Test Case1:test exceptional path with virtio_user
+=================================================
+Flow:tap0-->vhost-net-->virtio_user-->nic0-->nic1
+     tap0<--vhost-net<--virtio_user<--nic0<--nic1
+
+1. Connect two nic port directly, put nic1 into another namesapce::
+
+    ip netns del ns1
+    ip netns add ns1
+    ip link set [enp216s0f0] netns ns1       # [enp216s0f0] is the name of nic1
+    ip netns exec ns1 ifconfig [enp216s0f0] 1.1.1.8 up
+
+2. Modprobe vhost-net and make sure it's under /dev folder::
+
+    modprobe vhost-net
+
+3. Bind nic0 to igb_uio and launch the virtio_user with testpmd::
+
+    ./dpdk-devbind.py -b igb_uio xx:xx.x        # xx:xx.x is the pci addr of nic0
+    ./testpmd -c 0xc0000 -n 4 --socket-mem 1024,1024 --file-prefix=test2 \
+    --vdev=virtio_user0,mac=00:01:02:03:04:05,path=/dev/vhost-net,queue_size=1024 -- -i --rxd=1024 --txd=1024
+    testpmd>set fwd csum
+    testpmd>stop
+    testpmd>port stop 0
+    testpmd>port stop 1
+    testpmd>port config 0 tx_offload tcp_cksum on
+    testpmd>port config 0 tx_offload ipv4_cksum on
+    testpmd>csum set tcp hw 0
+    testpmd>csum set ip hw 0
+    testpmd>csum set ip sw 1
+    testpmd>csum set tcp hw 1
+    testpmd>set port 0 gso on
+    testpmd>tso set 1448 0
+    testpmd>port start 0
+    testpmd>port start 1
+    testpmd>start
+
+4. Check if there is a tap device generated and set the ip for tap0 device::
+
+    ls /sys/class/net/tap0
+    ifconfig tap0 1.1.1.2 up
+
+5. Set sw ipv4_csum for virtio_user by setting testpmd cmd::
+
+    testpmd>stop
+    testpmd>port stop 1
+    testpmd>csum set ip sw 1
+    testpmd>port start 1
+    testpmd>start
+
+6. Run iperf server at host and iperf client at ns1 namespace, get the performance from nic in kernel to the tap0::
+
+    iperf -s -i 1
+    ip netns exec ns1 iperf -c 1.1.1.2 -i 1 -t 60
+
+7. Change iperf server and client, run iperf server at ns1 namespace and iperf client at host, get the performance from tap0 to the nic in kernel::
+
+    ip netns exec ns1 iperf -s -i 1
+    iperf -c 1.1.1.8 -i 1 -t 60
+
+Test Case2:test vhost-net/virtio_user single queue performance
+==============================================================
+Flow: tap0<-->vhost-net<-->virtio_user<-->nic0<-->TG
+
+1. Disable ufw, otherwise virio-user can't received packets back from tap0::
+
+    ufw disable
+
+2. Bind the physical port to igb_uio, launch testpmd with one queue for virtio_user::
+
+    ./dpdk-devbind.py -b igb_uio xx:xx.x        # xx:xx.x is the pci addr of nic0
+    ./testpmd -l 1-2 -n 4 --socket-mem 1024,1024  --file-prefix=test2 --vdev=virtio_user0,mac=00:01:02:03:04:05,path=/dev/vhost-net,queue_size=1024,queues=1 -- -i --rxd=1024 --txd=1024
+
+3. Check if there is a tap device generated::
+
+    ls /sys/class/net/tap0
+    ifconfig tap0 up
+
+4. Set route table to let tap0 forward packets back to virtio-user port::
+
+    ifconfig tap0 2.2.2.2/24 up
+    route add -net 2.2.2.0/24 gw 2.2.2.1 dev tap0
+    arp -s 2.2.2.1 68:01:02:03:04:05
+
+5. Send 64 bytes traffic to the physical nic with dest mac= tap0's mac address, dest ip=2.2.2.x(except 2.2.2.2).
+
+6. Bind vhost-net kthread with logical core: firstly check process by "ps -ef|grep vhost", check vhost-net kthread by "ps -T xxxx", then bind the pid to the core at the same socket as the nic port by taskset.
+
+7. Try different line rate with ixia to find a point that rx_throughput=tx_throughput, for example if using ninatic 10G nic, the balance line rate is about 2.5.
+
+Test Case3: test vhost-net/virtio_user multiple queue
+=====================================================
+Flow: tap0<-->vhost-net<-->virtio_user<-->nic0<-->TG
+
+1.Disable ufw, otherwise virtio-user can't received packets back from tap0::
+
+    ufw disable
+
+2. Bind the physical port to igb_uio, launch testpmd with one queue for virtio_user::
+
+    ./dpdk-devbind.py -b igb_uio xx:xx.x        # xx:xx.x is the pci addr of nic0
+    ./testpmd -l 1-2 -n 4 --socket-mem 1024,1024  --file-prefix=test2 --vdev=virtio_user0,mac=00:01:02:03:04:05,path=/dev/vhost-net,queue_size=1024,queues=2 -- -i --rxd=1024 --txd=1024 --txq=2 --rxq=2 --nb-cores=1
+
+3. Check if there is a tap device generated::
+
+    ls /sys/class/net/tap0
+    ifconfig tap0 up
+
+4. Set route table to let tap0 forward packets back to virtio-user port::
+
+    ifconfig tap0 2.2.2.2/24 up
+    route add -net 2.2.2.0/24 gw 2.2.2.1 dev tap0
+    arp -s 2.2.2.1 68:01:02:03:04:05
+
+5. Send 64 bytes multi-ips traffic to the physical nic with dest mac= tap0's mac address, dest ip=2.2.2.x(except 2.2.2.2).
+
+6. Bind vhost-net kthread with logical core: firstly check process by "ps -ef|grep vhost", check vhost-net kthread by "ps -T xxxx", for multiple queues, there are multiple vhost kthreads, then bind the pids to different logical cores at the same socket as the nic port by taskset.
+
+7. Try different line rate with ixia to find a point that rx_throughput=tx_throughput, for example if using ninatic 10G nic, the balance line rate is about 5 (should be double of case 2).
\ No newline at end of file
-- 
2.17.1


^ permalink raw reply	[flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-06-26  7:21 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-06-17 19:08 [dts] [PATCH v1] test_plans: add test plan for virtio_user_as_exceptional_path test Yinan
2019-06-26  7:21 ` Tu, Lijuan

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).