From: hanyingya <yingyax.han@intel.com>
To: dts@dpdk.org, yuan.peng@intel.com
Cc: hanyingya <yingyax.han@intel.com>
Subject: [dts] [PATCH V1]tests: add performance_thread test suite
Date: Thu, 5 Sep 2019 14:26:01 +0000 [thread overview]
Message-ID: <20190905142601.25547-1-yingyax.han@intel.com> (raw)
Signed-off-by: hanyingya <yingyax.han@intel.com>
---
conf/performance_thread.cfg | 4 +
tests/TestSuite_performance_thread.py | 255 ++++++++++++++++++++++++++
2 files changed, 259 insertions(+)
create mode 100644 conf/performance_thread.cfg
create mode 100644 tests/TestSuite_performance_thread.py
diff --git a/conf/performance_thread.cfg b/conf/performance_thread.cfg
new file mode 100644
index 0000000..2bc76ea
--- /dev/null
+++ b/conf/performance_thread.cfg
@@ -0,0 +1,4 @@
+[suite]
+# specify cores to test based on dut cpu specification.
+frame_size=[64, 128, 256, 512, 1024, 2000]
+cores=[2, 4, 8, 16]
diff --git a/tests/TestSuite_performance_thread.py b/tests/TestSuite_performance_thread.py
new file mode 100644
index 0000000..4d4cfe0
--- /dev/null
+++ b/tests/TestSuite_performance_thread.py
@@ -0,0 +1,255 @@
+# BSD LICENSE
+#
+# Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+"""
+DPDK Test suite.
+Performance-Thread test script.
+"""
+import os
+import string
+import utils
+from test_case import TestCase
+from settings import HEADER_SIZE
+from pktgen import PacketGeneratorHelper
+
+
+class TestPerformanceThread(TestCase):
+
+ def set_up_all(self):
+ """
+ Run at the start of each test suite.
+ """
+ self.tester.extend_external_packet_generator(TestPerformanceThread, self)
+ self.dut_ports = self.dut.get_ports(self.nic)
+ global valports
+ valports = [_ for _ in self.dut_ports if self.tester.get_local_port(_) != -1]
+
+ # Verify that enough ports are available
+ self.verify(len(valports) >= 2, "Insufficent Ports")
+
+ self.port_mask = utils.create_mask(valports)
+ self.socket = self.dut.get_numa_id(self.dut_ports[0])
+
+ self.frame_sizes = self.get_suite_cfg()["frame_size"]
+ self.nb_cores = self.get_suite_cfg()["cores"]
+ self.headers_size = HEADER_SIZE['eth'] + HEADER_SIZE['ip'] + HEADER_SIZE['tcp']
+ self.path = "examples/performance-thread/l3fwd-thread/build/l3fwd-thread"
+
+ # compile performance_thread app
+ out = self.dut.build_dpdk_apps("./examples/performance-thread/l3fwd-thread")
+ self.verify("Error" not in out, "compilation error 1")
+ self.verify("No such file" not in out, "compilation error 2")
+
+ # results table header
+ self.test_results = {'header': [], 'data': []}
+
+ # get dts output path
+ if self.logger.log_path.startswith(os.sep):
+ self.output_path = self.logger.log_path
+ else:
+ cur_path = os.path.dirname(
+ os.path.dirname(os.path.realpath(__file__)))
+ self.output_path = os.sep.join([cur_path, self.logger.log_path])
+ # create an instance to set stream field setting
+ self.pktgen_helper = PacketGeneratorHelper()
+
+ def set_up(self):
+ """
+ Run before each test case.
+ """
+ pass
+
+ def flows(self):
+ """
+ Return a list of packets that implements the flows described.
+ """
+ return [
+ 'IP(src="1.2.3.4",dst="192.18.1.0")',
+ 'IP(src="1.2.3.4",dst="192.18.1.1")',
+ 'IP(src="1.2.3.4",dst="192.18.0.0")',
+ 'IP(src="1.2.3.4",dst="192.18.0.1")',
+ 'IP(src="1.2.3.4",dst="192.18.3.0")',
+ 'IP(src="1.2.3.4",dst="192.18.3.1")',
+ 'IP(src="1.2.3.4",dst="192.18.2.0")',
+ 'IP(src="1.2.3.4",dst="192.18.2.1")']
+
+ def create_cores(self, cores):
+
+ core_config = "1S/{}C/1T".format(cores)
+ core_list = self.dut.get_core_list(core_config, socket=self.socket)
+ core_mask = utils.create_mask(core_list)
+ return core_list, core_mask
+
+ def config_rx_tx(self, cores, core_list):
+
+ # config --tx and --tx params for performace thread app
+ if cores == 2:
+ rx = "({},{},{},{})".format(valports[0], 0, core_list[0], 0) + "," + "({},{},{},{})".format(valports[1], 0,
+ core_list[0], 0)
+ tx = "({},{})".format(core_list[1], 0)
+ elif cores == 4:
+ rx = "({},{},{},{})".format(valports[0], 0, core_list[0], 0) + "," + "({},{},{},{})".format(valports[1], 0,
+ core_list[1], 1)
+ tx = "({},{})".format(core_list[2], 0) + "," + "({},{})".format(core_list[3], 1)
+ elif cores == 8:
+ rx = "({},{},{},{})".format(valports[0], 0, core_list[0], 0) + "," + \
+ "({},{},{},{})".format(valports[0], 1, core_list[1], 1) + "," + \
+ "({},{},{},{})".format(valports[1], 0, core_list[2], 2) + "," + \
+ "({},{},{},{})".format(valports[1], 1, core_list[3], 3)
+ tx = "({},{})".format(core_list[4], 0) + "," + "({},{})".format(core_list[5], 1) + "," + \
+ "({},{})".format(core_list[6], 2) + "," + "({},{})".format(core_list[7], 3)
+ elif cores == 16:
+ rx = "({},{},{},{})".format(valports[0], 0, core_list[0], 0) + "," + \
+ "({},{},{},{})".format(valports[0], 1, core_list[1], 1) + "," + \
+ "({},{},{},{})".format(valports[0], 2, core_list[2], 2) + "," + \
+ "({},{},{},{})".format(valports[0], 3, core_list[3], 3) + "," + \
+ "({},{},{},{})".format(valports[1], 0, core_list[4], 4) + "," + \
+ "({},{},{},{})".format(valports[1], 1, core_list[5], 5) + "," + \
+ "({},{},{},{})".format(valports[1], 2, core_list[6], 6) + "," + \
+ "({},{},{},{})".format(valports[1], 3, core_list[7], 7)
+ tx = "({},{})".format(core_list[8], 0) + "," + "({},{})".format(core_list[9], 1) + "," + \
+ "({},{})".format(core_list[10], 2) + "," + "({},{})".format(core_list[11], 3) + "," + \
+ "({},{})".format(core_list[12], 4) + "," + "({},{})".format(core_list[13], 5) + "," + \
+ "({},{})".format(core_list[14], 6) + "," + "({},{})".format(core_list[15], 7)
+
+ lcore_config = "(%s-%s)@%s" % (core_list[0], core_list[-1], core_list[0])
+ return lcore_config, rx, tx
+
+ def create_pacap_file(self, frame_size):
+ """
+ Prepare traffic flow
+ """
+ dmac = [self.dut.get_mac_address(self.dut_ports[i]) for i in valports]
+ smac = ["02:00:00:00:00:0%d" % i for i in valports]
+ payload_size = frame_size - HEADER_SIZE['ip'] - HEADER_SIZE['eth']
+ pcaps = {}
+ for _port in valports:
+ index = valports[_port]
+ cnt = 0
+ for layer in self.flows()[_port * 2:(_port + 1) * 2]:
+ flow = ['Ether(dst="%s", src="%s")/%s/("X"*%d)' % (dmac[index], smac[index], layer, payload_size)]
+ pcap = os.sep.join([self.output_path, "dst{0}_{1}.pcap".format(index, cnt)])
+ self.tester.scapy_append('wrpcap("%s", [%s])' % (pcap, string.join(flow, ',')))
+ self.tester.scapy_execute()
+ if index not in pcaps:
+ pcaps[index] = []
+ pcaps[index].append(pcap)
+ cnt += 1
+ return pcaps
+
+ def prepare_stream(self, pcaps):
+ """
+ create streams for ports,one port one stream
+ """
+ tgen_input = []
+ for rxPort in valports:
+ if rxPort % len(valports) == 0 or len(valports) % rxPort == 2:
+ txIntf = self.tester.get_local_port(valports[rxPort + 1])
+ port_id = valports[rxPort + 1]
+ else:
+ txIntf = self.tester.get_local_port(valports[rxPort - 1])
+ port_id = valports[rxPort - 1]
+ rxIntf = self.tester.get_local_port(valports[rxPort])
+ for pcap in pcaps[port_id]:
+ tgen_input.append((txIntf, rxIntf, pcap))
+ return tgen_input
+
+ def perf_test(self, params):
+
+ # create result table
+ header_row = ["Frame size", "S/C/T", "Throughput(Mpps)", "Line Rate(%)"]
+ self.test_results["header"] = header_row
+ self.result_table_create(header_row)
+ self.test_results["data"] = []
+
+ for cores in self.nb_cores:
+ core_list, core_mask = self.create_cores(cores)
+ lcore_config, rx, tx = self.config_rx_tx(cores, core_list)
+ if self.running_case is "test_perf_n_lcore_per_pcore":
+ cmdline = "{} -n 4 --lcores='{}' {} --rx='{}' --tx='{}'".format(self.path, lcore_config, params, rx, tx)
+ else:
+ cmdline = "{} -c {} {} --rx='{}' --tx='{}'".format(self.path, core_mask, params, rx, tx)
+ self.dut.send_expect(cmdline, "L3FWD:", 120)
+
+ for frame_size in self.frame_sizes:
+ pcaps = self.create_pacap_file(frame_size)
+ # send the traffic and Measure test
+ tgenInput = self.prepare_stream(pcaps)
+
+ vm_config = self.set_fields()
+ # clear streams before add new streams
+ self.tester.pktgen.clear_streams()
+ # run packet generator
+ streams = self.pktgen_helper.prepare_stream_from_tginput(tgenInput, 100, vm_config, self.tester.pktgen)
+ # set traffic option
+ traffic_opt = {'delay': 15}
+ _, pps = self.tester.pktgen.measure_throughput(stream_ids=streams, options=traffic_opt)
+ self.verify(pps > 0, "No traffic detected")
+ pps /= 1000000.0
+ linerate = self.wirespeed(self.nic, frame_size, len(valports))
+ percentage = pps * 100 / linerate
+ data_row = [frame_size, "1S/{}C/1T".format(cores), str(pps), str(percentage)]
+ self.result_table_add(data_row)
+ self.test_results["data"].append(data_row)
+ # stop application
+ self.dut.send_expect("^C", "# ", 15)
+ self.result_table_print()
+
+ def test_perf_one_lcore_per_pcore(self):
+ params = "-n 4 -- -P -p {} --enable-jumbo --max-pkt-len=2500 --no-lthread" .format(self.port_mask)
+ self.perf_test(params)
+
+ def test_perf_n_lthreads_per_pcore(self):
+ params = "-n 4 -- -P -p {} --enable-jumbo --max-pkt-len=2500" .format(self.port_mask)
+ self.perf_test(params)
+
+ def test_perf_n_lcore_per_pcore(self):
+ params = "-- -P -p {} --enable-jumbo --max-pkt-len 2500 --no-lthread" .format(self.port_mask)
+ self.perf_test(params)
+
+ def set_fields(self):
+ """
+ set ip protocol field behavior
+ """
+ fields_config = {'ip': {'src': {'action': 'random'}, }, }
+ return fields_config
+
+ def tear_down(self):
+ """
+ Run after each test case.
+ """
+ self.dut.kill_all()
+
+ def tear_down_all(self):
+ """
+ Run after each test suite.
+ """
+ pass
--
2.17.1
next reply other threads:[~2019-09-05 6:26 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-05 14:26 hanyingya [this message]
2019-09-18 5:37 ` Peng, Yuan
2019-09-20 6:41 ` Tu, Lijuan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190905142601.25547-1-yingyax.han@intel.com \
--to=yingyax.han@intel.com \
--cc=dts@dpdk.org \
--cc=yuan.peng@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).