* [dts] [PATCH v1] teet plans:add test cases for vhost-user live migration test
@ 2019-09-25 0:58 Yinan
0 siblings, 0 replies; only message in thread
From: Yinan @ 2019-09-25 0:58 UTC (permalink / raw)
To: dts; +Cc: Wang Yinan
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=Y, Size: 30327 bytes --]
From: Wang Yinan <yinan.wang@intel.com>
Signed-off-by: Wang Yinan <yinan.wang@intel.com>
---
.../vhost_user_live_migration_test_plan.rst | 676 ++++++++++++------
1 file changed, 444 insertions(+), 232 deletions(-)
diff --git a/test_plans/vhost_user_live_migration_test_plan.rst b/test_plans/vhost_user_live_migration_test_plan.rst
index b386337..0b25677 100644
--- a/test_plans/vhost_user_live_migration_test_plan.rst
+++ b/test_plans/vhost_user_live_migration_test_plan.rst
@@ -1,232 +1,444 @@
-.. Copyright (c) <2016-2017>, Intel Corporation
- All rights reserved.
-
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions
- are met:
-
- - Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
-
- - Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in
- the documentation and/or other materials provided with the
- distribution.
-
- - Neither the name of Intel Corporation nor the names of its
- contributors may be used to endorse or promote products derived
- from this software without specific prior written permission.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- OF THE POSSIBILITY OF SUCH DAMAGE.
-
-===============================
-Vhost User Live Migration Tests
-===============================
-
-This feature is to make sure vhost user live migration works based on testpmd.
-
-Prerequisites
--------------
-
-HW setup
-
-1. Connect three ports to one switch, these three ports are from Host, Backup
- host and tester. Ensure the tester can send packets out, then host/backup server ports
- can receive these packets.
-2. Better to have 2 similar machine with the same OS.
-
-NFS configuration
-
-1. Make sure host nfsd module updated to v4 version(v2 not support file > 4G)
-
-2. Start nfs service and export nfs to backup host IP::
-
- host# service rpcbind start
- host# service nfs-server start
- host# service nfs-mountd start
- host# systemctrl stop firewalld.service
- host# vim /etc/exports
- host# /home/vm-image backup-host-ip(rw,sync,no_root_squash)
-
-3. Mount host nfs folder on backup host::
-
- backup# mount -t nfs -o nolock,vers=4 host-ip:/home/vm-image /mnt/nfs
-
-On host server side:
-
-1. Create enough hugepages for vhost-switch and qemu backend memory::
-
- host# echo 4096 > /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages
- host# mount -t hugetlbfs hugetlbfs /mnt/huge
-
-2. Bind host port to igb_uio and start testpmd with vhost port::
-
- #./tools/dpdk-devbind.py -b igb_uio 83:00.1
- #./x86_64-native-linuxapp-gcc/app/testpmd -c 0xc0000 -n 4 --vdev 'eth_vhost0,iface=./vhost-net,queues=1' --socket-mem 1024,1024 -- -i
-
- testpmd>start
-
-3. Start VM on host, here we set 5432 as the serial port, 3333 as the qemu monitor port, 5555 as the SSH port::
-
- taskset -c 22-23 qemu-system-x86_64 -name vm1host \
- -enable-kvm -m 2048 -object memory-backend-file,id=mem,size=2048M,mem-path=/mnt/huge,share=on \
- -numa node,memdev=mem -mem-prealloc -smp 2 -cpu host -drive file=/home/qxu10/img/vm1.img \
- -net nic,model=e1000,addr=1f -net user,hostfwd=tcp:127.0.0.1:5555-:22 \
- -chardev socket,id=char0,path=./vhost-net \
- -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
- -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01 \
- -monitor telnet::3333,server,nowait \
- -serial telnet:localhost:5432,server,nowait \
- -daemonize
-
-On the backup server, run the vhost testpmd on the host and launch VM:
-
-4. Set huge page, bind one port to igb_uio and run testpmd on the backup server, the command is very similar to host::
-
- backup server# echo 4096 > /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages
- backup server# mount -t hugetlbfs hugetlbfs /mnt/huge
- backup server#./tools/dpdk-devbind.py -b igb_uio 81:00.1
- backup server#./x86_64-native-linuxapp-gcc/app/testpmd -c 0xc0000 -n 4 --vdev 'eth_vhost0,iface=./vhost-net,queues=1' --socket-mem 1024,1024 -- -i
- testpmd>start
-
-5. Launch VM on the backup server, and the script is similar to host, but note the 2 differences:
-
- 1. need add " -incoming tcp:0:4444 " for live migration.
- 2. need make sure the VM image is the NFS mounted folder, VM image is the exact one on host server::
-
- Backup server #
- qemu-system-x86_64 -name vm2 \
- -enable-kvm -m 2048 -object memory-backend-file,id=mem,size=2048M,mem-path=/mnt/huge,share=on \
- -numa node,memdev=mem -mem-prealloc -smp 4 -cpu host -drive file=/mnt/nfs/vm1.img \
- -net nic,model=e1000,addr=1f -net user,hostfwd=tcp:127.0.0.1:5555-:22 \
- -chardev socket,id=char0,path=./vhost-net \
- -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
- -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01 \
- -monitor telnet::3333,server,nowait \
- -serial telnet:localhost:5432,server,nowait \
- -incoming tcp:0:4444 \
- -daemonize
-
-
-Test Case 1: migrate with virtio-pmd
-====================================
-Make sure all Prerequisites has been done
-
-6. SSH to VM and scp the DPDK folder from host to VM::
-
- host # ssh -p 5555 localhost, then input password to log in.
- host # scp -P 5555 -r <dpdk_folder>/ localhost:/root, then input password to let the file transfer.
-
-7. Telnet the serial port and run testpmd in VM::
-
- host # telnet localhost 5432
- Input Enter, then log in to VM
- If need leave the session, input "CTRL" + "]", then quit the telnet session.
- On the Host server VM, run below commands to launch testpmd
- host vm #
- cd /root/dpdk
- modprobe uio
- insmod ./x86_64-native-linuxapp-gcc/kmod/igb_uio.ko
- ./tools/dpdk_nic_bind.py --bind=igb_uio 00:03.0
- echo 1024 > /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages
- ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x3 -n 4 -- -i
-
- > set fwd rxonly
- > set verbose 1
- > start tx_first
-
-8. Check host vhost pmd connect with VM’s virtio device::
-
- testpmd> host testpmd message for connection
-
-9. Send continuous packets with the physical port's mac(e.g: 90:E2:BA:69:C9:C9)
- from tester port::
-
- tester# scapy
- tester# p = Ether(dst="90:E2:BA:69:C9:C9")/IP()/UDP()/Raw('x'*20)
- tester# sendp(p, iface="p5p1", inter=1, loop=1)
-
- Then check the host VM can receive the packet:
- host VM# testpmd> port 0/queue 0: received 1 packets
-
-10. Start Live migration, ensure the traffic is continuous at the HOST VM side::
-
- host server # telnet localhost 3333
- (qemu)migrate -d tcp:backup server:4444
- e.g: migrate -d tcp:10.239.129.176:4444
- (qemu)info migrate
- Check if the migrate is active and not failed.
-
-11. Check host vm can receive packet before migration done
-
-12. Query stats of migrate in monitor, check status of migration, when the status is completed, then the migration is done::
-
- host# (qemu)info migrate
- host# (qemu)
- Migration status: completed
-
-13. After live migration, go to the backup server and check if the virtio-pmd can continue to receive packets.::
-
- Backup server # telnet localhost 5432
-
- Log in then see the same screen from the host server, and check if the virtio-pmd can continue receive the packets.
-
-Test Case 2: migrate with virtio-net
-====================================
-
-Make sure all Prerequisites has been done.
-
-6. Telnet the serial port and run testpmd in VM::
-
- host # telnet localhost 5432
- Input Enter, then log in to VM
-
- If need leave the session, input "CTRL" + "]", then quit the telnet session.
-
-7. Let the virtio-net link up::
-
- host vm # ifconfig eth1 up
-
-8. Send continuous packets with the physical port's mac(e.g: 90:E2:BA:69:C9:C9)
- from tester port::
-
- tester# scapy
- tester# p = Ether(dst="90:E2:BA:69:C9:C9")/IP()/UDP()/Raw('x'*20)
- tester# sendp(p, iface="p5p1", inter=1, loop=1)
-
-9. Check the host VM can receive the packet::
-
- host VM# tcpdump -i eth1
-
-10. Start Live migration, ensure the traffic is continuous at the HOST VM side::
-
- host server # telnet localhost 3333
- (qemu)migrate -d tcp:backup server:4444
- e.g: migrate -d tcp:10.239.129.176:4444
- (qemu)info migrate
- Check if the migrate is active and not failed.
-
-11. Check host vm can receive packet before migration done.
-
-12. Query stats of migrate in monitor, check status of migration, when the status is completed, then the migration is done::
-
- host# (qemu)info migrate
- host# (qemu)
- Migration status: completed
-
-13. After live migration, go to the backup server and check if the virtio-pmd can continue to receive packets.::
-
- Backup server # telnet localhost 5432
-
- Log in then see the same screen from the host server, and check if the virtio-net can continue receive the packets.
+.. Copyright (c) <2016-2017>, Intel Corporation
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in
+ the documentation and/or other materials provided with the
+ distribution.
+
+ - Neither the name of Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived
+ from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ OF THE POSSIBILITY OF SUCH DAMAGE.
+
+===============================
+Vhost User Live Migration Tests
+===============================
+
+This feature is to make sure vhost user live migration works based on testpmd.
+
+Prerequisites
+-------------
+
+HW setup
+
+1. Connect three ports to one switch, these three ports are from Host, Backup
+ host and tester. Ensure the tester can send packets out, then host/backup server ports
+ can receive these packets.
+2. Better to have 2 similar machine with the same CPU and OS.
+
+NFS configuration
+
+1. Make sure host nfsd module updated to v4 version(v2 not support file > 4G)
+
+2. Start nfs service and export nfs to backup host IP::
+
+ host# service rpcbind start
+ host# service nfs-server start
+ host# service nfs-mountd start
+ host# systemctrl stop firewalld.service
+ host# vim /etc/exports
+ host# /home/osimg/live_mig backup-host-ip(rw,sync,no_root_squash)
+
+3. Mount host nfs folder on backup host::
+
+ backup# mount -t nfs -o nolock,vers=4 host-ip:/home/osimg/live_mig /mnt/nfs
+
+Test Case 1: migrate with virtio-pmd
+====================================
+
+On host server side:
+
+1. Create enough hugepages for testpmd and qemu backend memory::
+
+ host server# mkdir /mnt/huge
+ host server# mount -t hugetlbfs hugetlbfs /mnt/huge
+
+2. Bind host port to igb_uio and start testpmd with vhost port::
+
+ host server# ./tools/dpdk-devbind.py -b igb_uio 82:00.1
+ host server# ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xc0000 -n 4 --vdev 'eth_vhost0,iface=./vhost-net,queues=1' --socket-mem 1024,1024 -- -i
+ host server# testpmd>start
+
+3. Start VM on host, here we set 5432 as the serial port, 3333 as the qemu monitor port, 5555 as the SSH port::
+
+ qemu-system-x86_64 -name vm1 \
+ -enable-kvm -m 2048 -object memory-backend-file,id=mem,size=2048M,mem-path=/mnt/huge,share=on \
+ -numa node,memdev=mem -mem-prealloc -smp 2 -cpu host -drive file=/home/osimg/live_mig/ubuntu16.img \
+ -net nic,model=e1000,addr=1f -net user,hostfwd=tcp:127.0.0.1:5555-:22 \
+ -chardev socket,id=char0,path=./vhost-net \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01 \
+ -monitor telnet::3333,server,nowait \
+ -serial telnet:localhost:5432,server,nowait \
+ -vnc :10 -daemonize
+
+On the backup server, run the vhost testpmd on the host and launch VM:
+
+4. Set huge page, bind one port to igb_uio and run testpmd on the backup server, the command is very similar to host::
+
+ backup server # mkdir /mnt/huge
+ backup server # mount -t hugetlbfs hugetlbfs /mnt/huge
+ backup server # ./tools/dpdk-devbind.py -b igb_uio 82:00.0
+ backup server # ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xc0000 -n 4 --vdev 'eth_vhost0,iface=./vhost-net,queues=1' --socket-mem 1024,1024 -- -i
+ backup server # testpmd>start
+
+5. Launch VM on the backup server, the script is similar to host, need add " -incoming tcp:0:4444 " for live migration and make sure the VM image is the NFS mounted folder, VM image is the exact one on host server::
+
+ qemu-system-x86_64 -name vm1 \
+ -enable-kvm -m 2048 -object memory-backend-file,id=mem,size=2048M,mem-path=/mnt/huge,share=on \
+ -numa node,memdev=mem -mem-prealloc -smp 2 -cpu host -drive file=/home/osimg/live_mig/ubuntu16.img \
+ -net nic,model=e1000,addr=1f -net user,hostfwd=tcp:127.0.0.1:5555-:22 \
+ -chardev socket,id=char0,path=./vhost-net \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01 \
+ -monitor telnet::3333,server,nowait \
+ -serial telnet:localhost:5432,server,nowait \
+ -incoming tcp:0:4444 \
+ -vnc :10 -daemonize
+
+6. SSH to host VM and scp the DPDK folder from host to VM::
+
+ host server# ssh -p 5555 127.0.0.1
+ host server# scp -P 5555 -r <dpdk_folder>/ 127.0.0.1:/root
+
+7. Run testpmd in VM::
+
+ host VM# cd /root/<dpdk_folder>
+ host VM# make -j 110 install T=x86_64-native-linuxapp-gcc
+ host VM# modprobe uio
+ host VM# insmod ./x86_64-native-linuxapp-gcc/kmod/igb_uio.ko
+ host VM# ./tools/dpdk_nic_bind.py --bind=igb_uio 00:03.0
+ host VM# echo 1024 > /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages
+ host VM# screen -S vm
+ host VM# ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x3 -n 4 -- -i
+ host VM# testpmd>set fwd rxonly
+ host VM# testpmd>set verbose 1
+ host VM# testpmd>start
+
+8. Send continuous packets with the physical port's mac(e.g: 90:E2:BA:69:C9:C9) from tester port::
+
+ tester# scapy
+ tester# p = Ether(dst="90:E2:BA:69:C9:C9")/IP()/UDP()/Raw('x'*20)
+ tester# sendp(p, iface="p5p1", inter=1, loop=1)
+
+9. Check the virtio-pmd can receive the packet, then detach the session for retach on backup server::
+
+ host VM# testpmd>port 0/queue 0: received 1 packets
+ host VM# ctrl+a+d
+
+10. Start Live migration, ensure the traffic is continuous::
+
+ host server # telnet localhost 3333
+ host server # (qemu)migrate -d tcp:backup server:4444
+ host server # (qemu)info migrate
+ host server # Check if the migrate is active and not failed.
+
+11. Query stats of migrate in monitor, check status of migration, when the status is completed, then the migration is done::
+
+ host server # (qemu)info migrate
+ host server # (qemu)Migration status: completed
+
+12. After live migration, go to the backup server and check if the virtio-pmd can continue to receive packets::
+
+ backup server # ssh -p 5555 127.0.0.1
+ backup VM # screen -r vm
+
+Test Case 2: migrate with virtio-pmd zero-copy enabled
+======================================================
+
+On host server side:
+
+1. Create enough hugepages for testpmd and qemu backend memory::
+
+ host server# mkdir /mnt/huge
+ host server# mount -t hugetlbfs hugetlbfs /mnt/huge
+
+2. Bind host port to igb_uio and start testpmd with vhost port,note not start vhost port before launching qemu::
+
+ host server# ./tools/dpdk-devbind.py -b igb_uio 82:00.1
+ host server# ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xc0000 -n 4 --vdev 'eth_vhost0,iface=./vhost-net,queues=1,dequeue-zero-copy=1' --socket-mem 1024,1024 -- -i
+
+3. Start VM on host, here we set 5432 as the serial port, 3333 as the qemu monitor port, 5555 as the SSH port::
+
+ qemu-system-x86_64 -name vm1 \
+ -enable-kvm -m 2048 -object memory-backend-file,id=mem,size=2048M,mem-path=/mnt/huge,share=on \
+ -numa node,memdev=mem -mem-prealloc -smp 2 -cpu host -drive file=/home/osimg/live_mig/ubuntu16.img \
+ -net nic,model=e1000,addr=1f -net user,hostfwd=tcp:127.0.0.1:5555-:22 \
+ -chardev socket,id=char0,path=./vhost-net \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01 \
+ -monitor telnet::3333,server,nowait \
+ -serial telnet:localhost:5432,server,nowait \
+ -vnc :10 -daemonize
+
+On the backup server, run the vhost testpmd on the host and launch VM:
+
+4. Set huge page, bind one port to igb_uio and run testpmd on the backup server, the command is very similar to host::
+
+ backup server # mkdir /mnt/huge
+ backup server # mount -t hugetlbfs hugetlbfs /mnt/huge
+ backup server # ./tools/dpdk-devbind.py -b igb_uio 82:00.0
+ backup server # ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xc0000 -n 4 --vdev 'eth_vhost0,iface=./vhost-net,queues=1,dequeue-zero-copy=1' --socket-mem 1024,1024 -- -i
+
+5. Launch VM on the backup server, the script is similar to host, need add " -incoming tcp:0:4444 " for live migration and make sure the VM image is the NFS mounted folder, VM image is the exact one on host server::
+
+ qemu-system-x86_64 -name vm1 \
+ -enable-kvm -m 2048 -object memory-backend-file,id=mem,size=2048M,mem-path=/mnt/huge,share=on \
+ -numa node,memdev=mem -mem-prealloc -smp 2 -cpu host -drive file=/home/osimg/live_mig/ubuntu16.img \
+ -net nic,model=e1000,addr=1f -net user,hostfwd=tcp:127.0.0.1:5555-:22 \
+ -chardev socket,id=char0,path=./vhost-net \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01 \
+ -monitor telnet::3333,server,nowait \
+ -serial telnet:localhost:5432,server,nowait \
+ -incoming tcp:0:4444 \
+ -vnc :10 -daemonize
+
+6. SSH to host VM and scp the DPDK folder from host to VM::
+
+ host server# ssh -p 5555 127.0.0.1
+ host server# scp -P 5555 -r <dpdk_folder>/ 127.0.0.1:/root
+
+7. Run testpmd in VM::
+
+ host VM# cd /root/<dpdk_folder>
+ host VM# make -j 110 install T=x86_64-native-linuxapp-gcc
+ host VM# modprobe uio
+ host VM# insmod ./x86_64-native-linuxapp-gcc/kmod/igb_uio.ko
+ host VM# ./tools/dpdk_nic_bind.py --bind=igb_uio 00:03.0
+ host VM# echo 1024 > /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages
+ host VM# screen -S vm
+ host VM# ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x3 -n 4 -- -i
+ host VM# testpmd>set fwd rxonly
+ host VM# testpmd>set verbose 1
+ host VM# testpmd>start
+
+8. Start vhost testpmd on host and send continuous packets with the physical port's mac(e.g: 90:E2:BA:69:C9:C9) from tester port::
+
+ host# testpmd>start
+ tester# scapy
+ tester# p = Ether(dst="90:E2:BA:69:C9:C9")/IP()/UDP()/Raw('x'*20)
+ tester# sendp(p, iface="p5p1", inter=1, loop=1)
+
+9. Check the virtio-pmd can receive packets, then detach the session for retach on backup server::
+
+ host VM# testpmd>port 0/queue 0: received 1 packets
+ host VM# ctrl+a+d
+
+10. Start Live migration, ensure the traffic is continuous::
+
+ host server # telnet localhost 3333
+ host server # (qemu)migrate -d tcp:backup server:4444
+ host server # (qemu)info migrate
+ host server # Check if the migrate is active and not failed.
+
+11. Query stats of migrate in monitor, check status of migration, when the status is completed, then the migration is done::
+
+ host server # (qemu)info migrate
+ host server # (qemu)Migration status: completed
+
+12. After live migration, go to the backup server start vhost testpmd and check if the virtio-pmd can continue to receive packets::
+
+ backup server # testpmd>start
+ backup server # ssh -p 5555 127.0.0.1
+ backup VM # screen -r vm
+
+Test Case 3: migrate with virtio-net
+====================================
+
+On host server side:
+
+1. Create enough hugepages for testpmd and qemu backend memory::
+
+ host server# mkdir /mnt/huge
+ host server# mount -t hugetlbfs hugetlbfs /mnt/huge
+
+2. Bind host port to igb_uio and start testpmd with vhost port::
+
+ host server# ./tools/dpdk-devbind.py -b igb_uio 82:00.1
+ host server# ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xc0000 -n 4 --vdev 'eth_vhost0,iface=./vhost-net,queues=1' --socket-mem 1024,1024 -- -i
+ host server# testpmd>start
+
+3. Start VM on host, here we set 5432 as the serial port, 3333 as the qemu monitor port, 5555 as the SSH port::
+
+ qemu-system-x86_64 -name vm1 \
+ -enable-kvm -m 2048 -object memory-backend-file,id=mem,size=2048M,mem-path=/mnt/huge,share=on \
+ -numa node,memdev=mem -mem-prealloc -smp 2 -cpu host -drive file=/home/osimg/live_mig/ubuntu16.img \
+ -net nic,model=e1000,addr=1f -net user,hostfwd=tcp:127.0.0.1:5555-:22 \
+ -chardev socket,id=char0,path=./vhost-net \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01 \
+ -monitor telnet::3333,server,nowait \
+ -serial telnet:localhost:5432,server,nowait \
+ -vnc :10 -daemonize
+
+On the backup server, run the vhost testpmd on the host and launch VM:
+
+4. Set huge page, bind one port to igb_uio and run testpmd on the backup server, the command is very similar to host::
+
+ backup server # mkdir /mnt/huge
+ backup server # mount -t hugetlbfs hugetlbfs /mnt/huge
+ backup server # ./tools/dpdk-devbind.py -b igb_uio 82:00.0
+ backup server # ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xc0000 -n 4 --vdev 'eth_vhost0,iface=./vhost-net,queues=1' --socket-mem 1024,1024 -- -i
+ backup server # testpmd>start
+
+5. Launch VM on the backup server, the script is similar to host, need add " -incoming tcp:0:4444 " for live migration and make sure the VM image is the NFS mounted folder, VM image is the exact one on host server::
+
+ qemu-system-x86_64 -name vm1 \
+ -enable-kvm -m 2048 -object memory-backend-file,id=mem,size=2048M,mem-path=/mnt/huge,share=on \
+ -numa node,memdev=mem -mem-prealloc -smp 2 -cpu host -drive file=/home/osimg/live_mig/ubuntu16.img \
+ -net nic,model=e1000,addr=1f -net user,hostfwd=tcp:127.0.0.1:5555-:22 \
+ -chardev socket,id=char0,path=./vhost-net \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01 \
+ -monitor telnet::3333,server,nowait \
+ -serial telnet:localhost:5432,server,nowait \
+ -incoming tcp:0:4444 \
+ -vnc :10 -daemonize
+
+6. SSH to host VM and let the virtio-net link up::
+
+ host server# ssh -p 5555 127.0.0.1
+ host vm # ifconfig eth0 up
+ host VM# screen -S vm
+ host VM# tcpdump -i eth0
+
+7. Send continuous packets with the physical port's mac(e.g: 90:E2:BA:69:C9:C9) from tester port::
+
+ tester# scapy
+ tester# p = Ether(dst="90:E2:BA:69:C9:C9")/IP()/UDP()/Raw('x'*20)
+ tester# sendp(p, iface="p5p1", inter=1, loop=1)
+
+8. Check the virtio-net can receive the packet, then detach the session for retach on backup server::
+
+ host VM# testpmd>port 0/queue 0: received 1 packets
+ host VM# ctrl+a+d
+
+9. Start Live migration, ensure the traffic is continuous::
+
+ host server # telnet localhost 3333
+ host server # (qemu)migrate -d tcp:backup server:4444
+ host server # (qemu)info migrate
+ host server # Check if the migrate is active and not failed.
+
+10. Query stats of migrate in monitor, check status of migration, when the status is completed, then the migration is done::
+
+ host server # (qemu)info migrate
+ host server # (qemu)Migration status: completed
+
+11. After live migration, go to the backup server and check if the virtio-net can continue to receive packets::
+
+ backup server # ssh -p 5555 127.0.0.1
+ backup VM # screen -r vm
+
+Test Case 4: adjust virtio-net queue numbers while migrating with virtio-net
+============================================================================
+
+On host server side:
+
+1. Create enough hugepages for testpmd and qemu backend memory::
+
+ host server# mkdir /mnt/huge
+ host server# mount -t hugetlbfs hugetlbfs /mnt/huge
+
+2. Bind host port to igb_uio and start testpmd with vhost port::
+
+ host server# ./tools/dpdk-devbind.py -b igb_uio 82:00.1
+ host server# ./x86_64-native-linuxapp-gcc/app/testpmd -l 2-6 -n 4 --vdev 'net_vhost0,iface=./vhost-net,queues=4' --socket-mem 1024,1024 -- -i --nb-cores=4 --rxq=4 --txq=4
+ host server# testpmd>start
+
+3. Start VM on host, here we set 5432 as the serial port, 3333 as the qemu monitor port, 5555 as the SSH port::
+
+ qemu-system-x86_64 -name vm1 \
+ -enable-kvm -m 2048 -object memory-backend-file,id=mem,size=2048M,mem-path=/mnt/huge,share=on \
+ -numa node,memdev=mem -mem-prealloc -smp 2 -cpu host -drive file=/home/osimg/live_mig/ubuntu16.img \
+ -net nic,model=e1000,addr=1f -net user,hostfwd=tcp:127.0.0.1:5555-:22 \
+ -chardev socket,id=char0,path=./vhost-net \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=4 \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,mq=on,vectors=10 \
+ -monitor telnet::3333,server,nowait \
+ -serial telnet:localhost:5432,server,nowait \
+ -vnc :10 -daemonize
+
+On the backup server, run the vhost testpmd on the host and launch VM:
+
+4. Set huge page, bind one port to igb_uio and run testpmd on the backup server, the command is very similar to host::
+
+ backup server # mkdir /mnt/huge
+ backup server # mount -t hugetlbfs hugetlbfs /mnt/huge
+ backup server # ./tools/dpdk-devbind.py -b igb_uio 82:00.0
+ backup server#./x86_64-native-linuxapp-gcc/app/testpmd -l 2-6 -n 4 --vdev 'net_vhost0,iface=./vhost-net,queues=4' --socket-mem 1024,1024 -- -i --nb-cores=4 --rxq=4 --txq=4
+ backup server # testpmd>start
+
+5. Launch VM on the backup server, the script is similar to host, need add " -incoming tcp:0:4444 " for live migration and make sure the VM image is the NFS mounted folder, VM image is the exact one on host server::
+
+ qemu-system-x86_64 -name vm1 \
+ -enable-kvm -m 2048 -object memory-backend-file,id=mem,size=2048M,mem-path=/mnt/huge,share=on \
+ -numa node,memdev=mem -mem-prealloc -smp 2 -cpu host -drive file=/home/osimg/live_mig/ubuntu16.img \
+ -net nic,model=e1000,addr=1f -net user,hostfwd=tcp:127.0.0.1:5555-:22 \
+ -chardev socket,id=char0,path=./vhost-net \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=4 \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,mq=on,vectors=10 \
+ -monitor telnet::3333,server,nowait \
+ -serial telnet:localhost:5432,server,nowait \
+ -incoming tcp:0:4444 \
+ -vnc :10 -daemonize
+
+6. SSH to host VM and let the virtio-net link up::
+
+ host server# ssh -p 5555 127.0.0.1
+ host vm # ifconfig eth0 up
+ host VM# screen -S vm
+ host VM# tcpdump -i eth0
+
+7. Send continuous packets with the physical port's mac(e.g: 90:E2:BA:69:C9:C9) from tester port::
+
+ tester# scapy
+ tester# p = Ether(dst="90:E2:BA:69:C9:C9")/IP()/UDP()/Raw('x'*20)
+ tester# sendp(p, iface="p5p1", inter=1, loop=1)
+
+8. Check the virtio-net can receive the packet, then detach the session for retach on backup server::
+
+ host VM# testpmd>port 0/queue 0: received 1 packets
+ host VM# ctrl+a+d
+
+9. Start Live migration, ensure the traffic is continuous::
+
+ host server # telnet localhost 3333
+ host server # (qemu)migrate -d tcp:backup server:4444
+ host server # (qemu)info migrate
+ host server # Check if the migrate is active and not failed.
+
+10. Change virtio-net queue numbers from 1 to 4 while migrating::
+
+ host server # ethtool -L ens3 combined 4
+
+11. Query stats of migrate in monitor, check status of migration, when the status is completed, then the migration is done::
+
+ host server # (qemu)info migrate
+ host server # (qemu)Migration status: completed
+
+12. After live migration, go to the backup server and check if the virtio-net can continue to receive packets::
+
+ backup server # ssh -p 5555 127.0.0.1
+ backup VM # screen -r vm
\ No newline at end of file
--
2.17.1
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2019-09-25 8:02 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-09-25 0:58 [dts] [PATCH v1] teet plans:add test cases for vhost-user live migration test Yinan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).