From: Xiaoxiao Zeng <xiaoxiaox.zeng@intel.com>
To: dts@dpdk.org
Cc: Xiaoxiao Zeng <xiaoxiaox.zeng@intel.com>
Subject: [dts] [PATCH V2 2/2] tests/sriov_kvm:complete and refactor TestSuite_sriov_kvm
Date: Sun, 13 Oct 2019 04:37:41 +0800 [thread overview]
Message-ID: <20191012203741.3276-1-xiaoxiaox.zeng@intel.com> (raw)
*.complete cases according to sriov_kvm_test_plan.
*.expand setup_two_vm_common_prerequisite() to suit different fwd mode.
*.use self.port_id_0 instead port_id_0 in every case.
*.change reset env method in tear_down().
*.remove useless function and parameter
Signed-off-by: Xiaoxiao Zeng <xiaoxiaox.zeng@intel.com>
---
tests/TestSuite_sriov_kvm.py | 697 +++++++++++++++--------------------
1 file changed, 289 insertions(+), 408 deletions(-)
diff --git a/tests/TestSuite_sriov_kvm.py b/tests/TestSuite_sriov_kvm.py
index 3518f8f..10e463c 100644
--- a/tests/TestSuite_sriov_kvm.py
+++ b/tests/TestSuite_sriov_kvm.py
@@ -11,6 +11,7 @@ Test userland 10Gb PMD.
import re
import pdb
import time
+import random
from virt_common import VM
from test_case import TestCase
@@ -23,7 +24,6 @@ VM_CORES_MASK = 'all'
class TestSriovKvm(TestCase):
-
supported_vf_driver = ['pci-stub', 'vfio-pci']
def set_up_all(self):
@@ -39,8 +39,7 @@ class TestSriovKvm(TestCase):
self.vm0 = None
self.vm1 = None
- self.vm2 = None
- self.vm3 = None
+ self.port_id_0 = 0
self.vf_driver = self.get_suite_cfg()['vf_driver']
if self.vf_driver is None:
@@ -51,11 +50,8 @@ class TestSriovKvm(TestCase):
else:
self.vf_assign_method = 'vfio-pci'
self.dut.send_expect('modprobe vfio-pci', '#')
- self.setup_2vm_2pf_env_flag = 0
self.setup_2vm_2vf_env_flag = 0
self.setup_2vm_prerequisite_flag = 0
- self.setup_4vm_4vf_env_flag = 0
- self.setup_4vm_prerequisite_flag = 0
self.setup_2vm_2vf_env()
def set_up(self):
@@ -293,46 +289,6 @@ class TestSriovKvm(TestCase):
"Data received by port, but should not.")
return count * loop
- def setup_2vm_2pf_env(self):
- p0 = self.dut_ports[0]
- p1 = self.dut_ports[1]
-
- self.port0 = self.dut.ports_info[p0]['port']
- self.port0.unbind_driver()
- self.port0_pci = self.dut.ports_info[p0]['pci']
-
- self.port1 = self.dut.ports_info[p1]['port']
- self.port1.unbind_driver()
- self.port1_pci = self.dut.ports_info[p1]['pci']
-
- vf0_prop = {'opt_host': self.port0_pci}
- vf1_prop = {'opt_host': self.port1_pci}
-
- # set up VM0 ENV
- self.vm0 = VM(self.dut, 'vm0', 'sriov_kvm')
- self.vm0.set_vm_device(driver=self.vf_assign_method, **vf0_prop)
- self.vm_dut_0 = self.vm0.start()
-
- # set up VM1 ENV
- self.vm1 = VM(self.dut, 'vm1', 'sriov_kvm')
- self.vm1.set_vm_device(driver=self.vf_assign_method, **vf1_prop)
- self.vm_dut_1 = self.vm1.start()
-
- self.setup_2vm_2vf_env_flag = 1
-
- def destroy_2vm_2pf_env(self):
- self.vm0.stop()
- self.port0.bind_driver('igb_uio')
- self.vm0 = None
-
- self.vm1.stop()
- self.port1.bind_driver('igb_uio')
- self.vm1 = None
-
- self.dut.virt_exit()
-
- self.setup_2vm_2vf_env_flag = 0
-
def setup_2vm_2vf_env(self, driver='igb_uio'):
self.used_dut_port = self.dut_ports[0]
@@ -412,106 +368,6 @@ class TestSriovKvm(TestCase):
self.setup_2vm_2vf_env_flag = 0
- def setup_4vm_4vf_env(self, driver='igb_uio'):
- self.used_dut_port = self.dut_ports[0]
-
- self.dut.generate_sriov_vfs_by_port(
- self.used_dut_port, 4, driver=driver)
- self.sriov_vfs_port = self.dut.ports_info[self.used_dut_port]['port']
-
- try:
- for port in self.sriov_vfs_port:
- port.bind_driver('pci-stub')
-
- time.sleep(1)
-
- vf0_prop = {'opt_host': self.sriov_vfs_port[0].pci}
- vf1_prop = {'opt_host': self.sriov_vfs_port[1].pci}
- vf2_prop = {'opt_host': self.sriov_vfs_port[2].pci}
- vf3_prop = {'opt_host': self.sriov_vfs_port[3].pci}
-
- for port_id in self.dut_ports:
- if port_id == self.used_dut_port:
- continue
- port = self.dut.ports_info[port_id]['port']
- port.bind_driver()
-
- if driver == 'igb_uio':
- # start testpmd with the four VFs on the host
- self.host_testpmd = PmdOutput(self.dut)
- eal_param = '-b %(vf0) -b %(vf1)s -b %(vf2)s -b %(vf3)s' % \
- {'vf0': self.sriov_vfs_pci[0],
- 'vf1': self.sriov_vfs_pci[1],
- 'vf2': self.sriov_vfs_pci[2],
- 'vf3': self.sriov_vfs_pci[3]}
- self.host_testpmd.start_testpmd(
- "1S/2C/2T", eal_param=eal_param)
-
- self.vm0 = VM(self.dut, 'vm0', 'sriov_kvm')
- self.vm0.set_vm_device(driver=self.vf_assign_method, **vf0_prop)
- self.vm_dut_0 = self.vm0.start()
- if self.vm_dut_0 is None:
- raise Exception("Set up VM0 ENV failed!")
-
- self.vm1 = VM(self.dut, 'vm1', 'sriov_kvm')
- self.vm1.set_vm_device(driver=self.vf_assign_method, **vf1_prop)
- self.vm_dut_1 = self.vm1.start()
- if self.vm_dut_1 is None:
- raise Exception("Set up VM1 ENV failed!")
-
- self.vm2 = VM(self.dut, 'vm2', 'sriov_kvm')
- self.vm2.set_vm_device(driver=self.vf_assign_method, **vf2_prop)
- self.vm_dut_2 = self.vm2.start()
- if self.vm_dut_2 is None:
- raise Exception("Set up VM2 ENV failed!")
-
- self.vm3 = VM(self.dut, 'vm3', 'sriov_kvm')
- self.vm3.set_vm_device(driver=self.vf_assign_method, **vf3_prop)
- self.vm_dut_3 = self.vm3.start()
- if self.vm_dut_3 is None:
- raise Exception("Set up VM3 ENV failed!")
-
- self.setup_4vm_4vf_env_flag = 1
- except Exception as e:
- self.destroy_4vm_4vf_env()
- raise Exception(e)
-
- def destroy_4vm_4vf_env(self):
- if getattr(self, 'vm0', None):
- self.vm0.stop()
- self.vm0 = None
-
- if getattr(self, 'vm1', None):
- self.vm1.stop()
- self.vm1 = None
-
- if getattr(self, 'vm2', None):
- self.vm2.stop()
- self.vm2 = None
-
- if getattr(self, 'vm3', None):
- self.vm3.stop()
- self.vm3 = None
-
- if getattr(self, 'host_testpmd', None):
- self.host_testpmd.execute_cmd('stop')
- self.host_testpmd.execute_cmd('quit', '# ')
- self.host_testpmd = None
-
- self.dut.virt_exit()
-
- if getattr(self, 'used_dut_port', None) != None:
- self.dut.destroy_sriov_vfs_by_port(self.used_dut_port)
- port = self.ports_info[self.used_dut_port]['port']
- port.bind_driver('igb_uio')
- self.used_dut_port = None
-
- for port_id in self.dut_ports:
- port = self.dut.ports_info[port_id]['port']
- port.bind_driver('igb_uio')
-
- self.setup_4vm_4vf_env_flag = 0
-
def transform_integer(self, value):
try:
value = int(value)
@@ -564,7 +420,7 @@ class TestSriovKvm(TestCase):
rule_id = self.make_port_new_ruleid(port)
mirror_rule_cmd = "set port %d mirror-rule %d %s %s" % \
- (port, rule_id, mirror_name, rule_detail)
+ (port, rule_id, mirror_name, rule_detail)
out = self.dut.send_expect("%s" % mirror_rule_cmd, "testpmd> ")
self.verify('Bad arguments' not in out, "Set port %d %s failed!" %
(port, mirror_name))
@@ -622,23 +478,27 @@ class TestSriovKvm(TestCase):
for rule_id in self.port_mirror_ref[port][:]:
self.reset_port_mirror_rule(port, rule_id)
- def setup_two_vm_common_prerequisite(self):
- self.vm0_dut_ports = self.vm_dut_0.get_ports('any')
- self.vm0_testpmd = PmdOutput(self.vm_dut_0)
- self.vm0_testpmd.start_testpmd(VM_CORES_MASK)
- self.vm0_testpmd.execute_cmd('set fwd rxonly')
+ def setup_two_vm_common_prerequisite(self, fwd0="rxonly", fwd1="mac"):
+
+ if self.setup_2vm_prerequisite_flag == 1:
+ self.vm0_testpmd.execute_cmd('stop')
+ self.vm1_testpmd.execute_cmd('stop')
+ else:
+ self.vm0_dut_ports = self.vm_dut_0.get_ports('any')
+ self.vm0_testpmd = PmdOutput(self.vm_dut_0)
+ self.vm0_testpmd.start_testpmd(VM_CORES_MASK)
+ self.vm1_dut_ports = self.vm_dut_1.get_ports('any')
+ self.vm1_testpmd = PmdOutput(self.vm_dut_1)
+ self.vm1_testpmd.start_testpmd(VM_CORES_MASK)
+ self.setup_2vm_prerequisite_flag = 1
+
+ self.vm0_testpmd.execute_cmd('set fwd %s' % fwd0)
self.vm0_testpmd.execute_cmd('set promisc all off')
self.vm0_testpmd.execute_cmd('start')
-
- self.vm1_dut_ports = self.vm_dut_1.get_ports('any')
- self.vm1_testpmd = PmdOutput(self.vm_dut_1)
- self.vm1_testpmd.start_testpmd(VM_CORES_MASK)
- self.vm1_testpmd.execute_cmd('set fwd mac')
+ self.vm1_testpmd.execute_cmd('set fwd %s' % fwd1)
self.vm1_testpmd.execute_cmd('set promisc all off')
self.vm1_testpmd.execute_cmd('start')
- self.setup_2vm_prerequisite_flag = 1
-
def destroy_two_vm_common_prerequisite(self):
self.vm0_testpmd = None
self.vm0_dut_ports = None
@@ -650,33 +510,17 @@ class TestSriovKvm(TestCase):
self.setup_2vm_prerequisite_flag = 0
- def stop_test_setup_two_vm_pf_env(self):
- self.setup_2vm_2pf_env()
-
- out = self.vm_dut_0.send_expect("ifconfig", '# ')
- print out
- out = self.vm_dut_0.send_expect("lspci -nn | grep -i eth", '# ')
- print out
-
- out = self.vm_dut_1.send_expect("ifconfig", '# ')
- print out
- out = self.vm_dut_1.send_expect("lspci -nn | grep -i eth", '# ')
- print out
-
- self.destroy_2vm_2pf_env()
-
def test_two_vms_intervm_communication(self):
if self.setup_2vm_prerequisite_flag == 1:
self.vm0_testpmd.execute_cmd('quit', '# ')
self.vm1_testpmd.execute_cmd('quit', '# ')
self.vm0_dut_ports = self.vm_dut_0.get_ports('any')
self.vm1_dut_ports = self.vm_dut_1.get_ports('any')
- port_id_0 = 0
packet_num = 10
self.vm1_testpmd = PmdOutput(self.vm_dut_1)
self.vm1_testpmd.start_testpmd(VM_CORES_MASK)
- vf1_mac = self.vm1_testpmd.get_port_mac(port_id_0)
+ vf1_mac = self.vm1_testpmd.get_port_mac(self.port_id_0)
self.vm1_testpmd.execute_cmd('set fwd mac')
self.vm1_testpmd.execute_cmd("set promisc all off")
self.vm1_testpmd.execute_cmd('start')
@@ -684,7 +528,7 @@ class TestSriovKvm(TestCase):
self.vm0_testpmd = PmdOutput(self.vm_dut_0)
self.vm0_testpmd.start_testpmd(
VM_CORES_MASK, "--eth-peer=0,%s" % vf1_mac)
- vf0_mac = self.vm0_testpmd.get_port_mac(port_id_0)
+ vf0_mac = self.vm0_testpmd.get_port_mac(self.port_id_0)
self.vm0_testpmd.execute_cmd('set fwd mac')
self.vm0_testpmd.execute_cmd("set promisc all off")
self.vm0_testpmd.execute_cmd('start')
@@ -692,10 +536,10 @@ class TestSriovKvm(TestCase):
self.setup_2vm_prerequisite_flag = 1
time.sleep(2)
- vm1_start_stats = self.vm1_testpmd.get_pmd_stats(port_id_0)
+ vm1_start_stats = self.vm1_testpmd.get_pmd_stats(self.port_id_0)
self.send_packet(
- self.vm_dut_0, self.vm0_dut_ports, port_id_0, count=packet_num)
- vm1_end_stats = self.vm1_testpmd.get_pmd_stats(port_id_0)
+ self.vm_dut_0, self.vm0_dut_ports, self.port_id_0, count=packet_num)
+ vm1_end_stats = self.vm1_testpmd.get_pmd_stats(self.port_id_0)
self.verify(
vm1_end_stats["TX-packets"] - vm1_start_stats["TX-packets"] == packet_num,
@@ -713,117 +557,178 @@ class TestSriovKvm(TestCase):
ret_stats[key] = end_stats[key] - start_stats[key]
return ret_stats
- def test_two_vms_pool_mirror(self):
- port_id_0 = 0
+ def test_two_vms_pool_up_mirrors(self):
+ """
+ Test Case2: Mirror Traffic between 2VMs with Pool up mirroring
+ """
packet_num = 10
- rule_id = self.set_port_pool_mirror(port_id_0, '0x1 dst-pool 1 on')
- vm1_start_stats = self.vm1_testpmd.get_pmd_stats(port_id_0)
+ # set Pool up mirror rule
+ rule_id = self.set_port_pool_mirror(self.port_id_0, '0x1 dst-pool 1 on')
+
+ # get vm1 port stats
+ vm1_start_stats = self.vm1_testpmd.get_pmd_stats(self.port_id_0)
+
+ # send 10 packets
self.send_packet(
- self.vm_dut_0, self.vm0_dut_ports, port_id_0, count=packet_num)
- vm1_end_stats = self.vm1_testpmd.get_pmd_stats(port_id_0)
+ self.vm_dut_0, self.vm0_dut_ports, self.port_id_0, count=packet_num)
+
+ # get vm1 port stats
+ vm1_end_stats = self.vm1_testpmd.get_pmd_stats(self.port_id_0)
+ # verify vm1 receive packets
vm1_ret_stats = self.calculate_stats(vm1_start_stats, vm1_end_stats)
+ self.verify(vm1_ret_stats['RX-packets'] == packet_num and vm1_ret_stats['TX-packets'] == packet_num,
+ "Pool up mirror failed between VM0 and VM1!")
- self.verify(vm1_ret_stats['RX-packets'] == packet_num and
- vm1_ret_stats['TX-packets'] == packet_num,
- "Pool mirror failed between VM0 and VM1!")
+ def test_two_vms_pool_down_mirrors(self):
+ """
+ Test Case3: Mirror Traffic between 2VMs with Pool down mirroring
+ """
+ mirror_name = "pool-mirror-down"
+ packet_num = 32
+
+ # set up common 2VM prerequisites
+ self.setup_two_vm_common_prerequisite(fwd0="mac", fwd1="rxonly")
+
+ # set Pool down mirror rule
+ rule_id = self.set_port_mirror_rule(self.port_id_0, mirror_name, '0x1 dst-pool 1 on')
+
+ # get vm port stats
+ vm0_start_stats = self.vm0_testpmd.get_pmd_stats(self.port_id_0)
+ vm1_start_stats = self.vm1_testpmd.get_pmd_stats(self.port_id_0)
+
+ # send packets
+ self.vm0_testpmd.execute_cmd('stop')
+ self.vm0_testpmd.execute_cmd('start tx_first')
+
+ # get vm port stats
+ vm0_end_stats = self.vm0_testpmd.get_pmd_stats(self.port_id_0)
+ vm1_end_stats = self.vm1_testpmd.get_pmd_stats(self.port_id_0)
+
+ # verify vm1 receive packets
+ vm0_ret_stats = self.calculate_stats(vm0_start_stats, vm0_end_stats)
+ vm1_ret_stats = self.calculate_stats(vm1_start_stats, vm1_end_stats)
- self.reset_port_mirror_rule(port_id_0, rule_id)
+ self.verify(vm1_ret_stats['RX-packets'] == vm0_ret_stats['TX-packets'] and vm1_ret_stats['RX-packets'] == packet_num,
+ "Pool down mirror failed between VM0 and VM1!")
def test_two_vms_uplink_mirror(self):
- port_id_0 = 0
+ """
+ Test Case4: Mirror Traffic between 2VMs with Uplink mirroring
+ """
packet_num = 10
- rule_id = self.set_port_uplink_mirror(port_id_0, 'dst-pool 1 on')
- vm1_start_stats = self.vm1_testpmd.get_pmd_stats(port_id_0)
+ # set uplink mirror rule
+ rule_id = self.set_port_uplink_mirror(self.port_id_0, 'dst-pool 1 on')
+
+ # get vm1 port stats
+ vm1_start_stats = self.vm1_testpmd.get_pmd_stats(self.port_id_0)
+
+ # send packets
self.send_packet(
- self.vm_dut_0, self.vm0_dut_ports, port_id_0, count=packet_num)
- vm1_end_stats = self.vm1_testpmd.get_pmd_stats(port_id_0)
+ self.vm_dut_0, self.vm0_dut_ports, self.port_id_0, count=packet_num)
+
+ # get vm1 port stats
+ vm1_end_stats = self.vm1_testpmd.get_pmd_stats(self.port_id_0)
+ # verify vm1 receive packets
vm1_ret_stats = self.calculate_stats(vm1_start_stats, vm1_end_stats)
- self.verify(vm1_ret_stats['RX-packets'] == packet_num and
- vm1_ret_stats['TX-packets'] == packet_num,
+ self.verify(vm1_ret_stats['RX-packets'] == packet_num and vm1_ret_stats['TX-packets'] == packet_num,
"Uplink mirror failed between VM0 and VM1!")
- self.reset_port_mirror_rule(port_id_0, rule_id)
-
def test_two_vms_downlink_mirror(self):
- self.vm0_testpmd.execute_cmd('stop')
- self.vm1_testpmd.execute_cmd('stop')
+ """
+ Test Case5: Mirror Traffic between 2VMs with Downlink mirroring
+ """
+ packet_num = 32
- port_id_0 = 0
+ # set downlink mirror rule
+ rule_id = self.set_port_downlink_mirror(self.port_id_0, 'dst-pool 1 on')
- rule_id = self.set_port_downlink_mirror(port_id_0, 'dst-pool 1 on')
+ # set up common 2VM prerequisites
+ self.setup_two_vm_common_prerequisite(fwd0="mac", fwd1="rxonly")
- self.vm1_testpmd.execute_cmd('set fwd rxonly')
- self.vm1_testpmd.execute_cmd('start')
- vm1_start_stats = self.vm1_testpmd.get_pmd_stats(port_id_0)
- vm0_start_stats = self.vm0_testpmd.get_pmd_stats(port_id_0)
+ # get vms port stats
+ vm0_start_stats = self.vm0_testpmd.get_pmd_stats(self.port_id_0)
+ vm1_start_stats = self.vm1_testpmd.get_pmd_stats(self.port_id_0)
+
+ # send packets
+ self.vm0_testpmd.execute_cmd('stop')
self.vm0_testpmd.execute_cmd('start tx_first')
- vm0_end_stats = self.vm0_testpmd.get_pmd_stats(port_id_0)
- vm1_end_stats = self.vm1_testpmd.get_pmd_stats(port_id_0)
+ # get vms port stats
+ vm0_end_stats = self.vm0_testpmd.get_pmd_stats(self.port_id_0)
+ vm1_end_stats = self.vm1_testpmd.get_pmd_stats(self.port_id_0)
+
+ # verify vm1 receive packets
vm0_ret_stats = self.calculate_stats(vm0_start_stats, vm0_end_stats)
vm1_ret_stats = self.calculate_stats(vm1_start_stats, vm1_end_stats)
- self.verify(self.vm0_testpmd.check_tx_bytes(vm1_ret_stats['RX-packets'], vm0_ret_stats['TX-packets']),
+ self.verify(vm1_ret_stats['RX-packets'] == vm0_ret_stats['TX-packets'] and vm1_ret_stats['RX-packets'] == packet_num,
"Downlink mirror failed between VM0 and VM1!")
- self.reset_port_mirror_rule(port_id_0, rule_id)
-
def test_two_vms_vlan_mirror(self):
- self.vm1_testpmd.execute_cmd('vlan set strip on 0')
- port_id_0 = 0
- vlan_id = 0
+ """
+ Test Case6: Mirror Traffic between 2VMs with Vlan mirroring
+ """
+ vlan_id = random.randint(1, 4095)
vf_mask = '0x1'
packet_num = 10
- self.host_testpmd.execute_cmd(
- 'rx_vlan add %d port %d vf %s' % (vlan_id, port_id_0, vf_mask))
- rule_id = self.set_port_vlan_mirror(port_id_0, '0 dst-pool 1 on')
+ # set up common 2VM prerequisites
+ self.setup_two_vm_common_prerequisite(fwd0="mac", fwd1="rxonly")
+
+ # add rx vlan on VF0
+ self.host_testpmd.execute_cmd('rx_vlan add %d port %d vf %s' % (vlan_id, self.port_id_0, vf_mask))
- vm1_start_stats = self.vm1_testpmd.get_pmd_stats(port_id_0)
+ # set vlan mirror rule
+ rule_id = self.set_port_vlan_mirror(self.port_id_0, '%d dst-pool 1 on' % vlan_id)
+
+ # get vm port stats
+ vm1_start_stats = self.vm1_testpmd.get_pmd_stats(self.port_id_0)
+
+ # send packets
ether_ip = {}
ether_ip['vlan'] = {'vlan': '%d' % vlan_id}
self.send_packet(
self.vm_dut_0,
self.vm0_dut_ports,
- port_id_0,
+ self.port_id_0,
count=packet_num,
**ether_ip)
- vm1_end_stats = self.vm1_testpmd.get_pmd_stats(port_id_0)
+ # get vm port stats
+ vm1_end_stats = self.vm1_testpmd.get_pmd_stats(self.port_id_0)
+
+ # reset pf vlan
+ self.host_testpmd.execute_cmd('rx_vlan rm %d port %d vf %s' % (vlan_id, self.port_id_0, vf_mask))
+
+ # verify vm1 receive packets
vm1_ret_stats = self.calculate_stats(vm1_start_stats, vm1_end_stats)
- self.verify(vm1_ret_stats['RX-packets'] == packet_num and
- vm1_ret_stats['TX-packets'] == packet_num,
- "Vlan mirror failed between VM0 and VM1!")
- self.host_testpmd.execute_cmd(
- 'rx_vlan rm %d port %d vf %s' % (vlan_id, port_id_0, vf_mask))
- self.reset_port_mirror_rule(port_id_0, rule_id)
+ self.verify(vm1_ret_stats['RX-packets'] == packet_num * 2, "Vlan mirror failed between VM0 and VM1!")
def test_two_vms_vlan_and_pool_mirror(self):
self.vm0_testpmd.execute_cmd('vlan set strip on 0')
self.vm1_testpmd.execute_cmd('vlan set strip on 0')
- port_id_0 = 0
vlan_id = 3
vf_mask = '0x2'
packet_num = 10
self.host_testpmd.execute_cmd(
- 'rx_vlan add %d port %d vf %s' % (vlan_id, port_id_0, vf_mask))
- self.set_port_pool_mirror(port_id_0, '0x1 dst-pool 1 on')
- self.set_port_vlan_mirror(port_id_0, '%d dst-pool 0 on' % vlan_id)
+ 'rx_vlan add %d port %d vf %s' % (vlan_id, self.port_id_0, vf_mask))
+ self.set_port_pool_mirror(self.port_id_0, '0x1 dst-pool 1 on')
+ self.set_port_vlan_mirror(self.port_id_0, '%d dst-pool 0 on' % vlan_id)
- vm1_start_stats = self.vm1_testpmd.get_pmd_stats(port_id_0)
+ vm1_start_stats = self.vm1_testpmd.get_pmd_stats(self.port_id_0)
self.send_packet(
self.vm_dut_0,
self.vm0_dut_ports,
- port_id_0,
+ self.port_id_0,
count=packet_num)
- vm1_end_stats = self.vm1_testpmd.get_pmd_stats(port_id_0)
+ vm1_end_stats = self.vm1_testpmd.get_pmd_stats(self.port_id_0)
vm1_ret_stats = self.calculate_stats(vm1_start_stats, vm1_end_stats)
@@ -831,157 +736,149 @@ class TestSriovKvm(TestCase):
vm1_ret_stats['TX-packets'] == packet_num,
"Pool mirror failed between VM0 and VM1 when set vlan and pool mirror!")
- vm0_start_stats = self.vm0_testpmd.get_pmd_stats(port_id_0)
+ vm0_start_stats = self.vm0_testpmd.get_pmd_stats(self.port_id_0)
ether_ip = {}
ether_ip['vlan'] = {'vlan': '%d' % vlan_id}
self.send_packet(
self.vm_dut_1,
self.vm1_dut_ports,
- port_id_0,
+ self.port_id_0,
count=10 *
- packet_num,
+ packet_num,
**ether_ip)
- vm0_end_stats = self.vm0_testpmd.get_pmd_stats(port_id_0)
+ vm0_end_stats = self.vm0_testpmd.get_pmd_stats(self.port_id_0)
vm0_ret_stats = self.calculate_stats(vm0_start_stats, vm0_end_stats)
self.verify(self.vm0_testpmd.check_tx_bytes(vm0_ret_stats['RX-packets'], 10 * packet_num),
"Vlan mirror failed between VM0 and VM1 when set vlan and pool mirror!")
self.host_testpmd.execute_cmd(
- 'rx_vlan rm %d port %d vf %s' % (vlan_id, port_id_0, vf_mask))
- self.reset_port_all_mirror_rule(port_id_0)
+ 'rx_vlan rm %d port %d vf %s' % (vlan_id, self.port_id_0, vf_mask))
+ self.reset_port_all_mirror_rule(self.port_id_0)
def test_two_vms_uplink_and_downlink_mirror(self):
- self.vm0_testpmd.execute_cmd('stop')
- self.vm1_testpmd.execute_cmd('stop')
-
- port_id_0 = 0
+ """
+ Test Case7: Mirror Traffic between 2VMs with up link mirroring & down link mirroring
+ """
packet_num = 10
- self.set_port_downlink_mirror(port_id_0, 'dst-pool 1 on')
- self.set_port_uplink_mirror(port_id_0, 'dst-pool 1 on')
+ # set up common 2VM prerequisites
+ self.setup_two_vm_common_prerequisite(fwd0="mac", fwd1="rxonly")
- self.vm1_testpmd.execute_cmd('set fwd rxonly')
- self.vm1_testpmd.execute_cmd('start')
- vm1_start_stats = self.vm1_testpmd.get_pmd_stats(port_id_0)
- vm0_start_stats = self.vm0_testpmd.get_pmd_stats(port_id_0)
- self.vm0_testpmd.execute_cmd('start tx_first')
- vm0_end_stats = self.vm0_testpmd.get_pmd_stats(port_id_0)
- vm1_end_stats = self.vm1_testpmd.get_pmd_stats(port_id_0)
+ # set mirror rule
+ self.set_port_downlink_mirror(self.port_id_0, 'dst-pool 1 on')
+ self.set_port_uplink_mirror(self.port_id_0, 'dst-pool 1 on')
- vm0_ret_stats = self.calculate_stats(vm0_start_stats, vm0_end_stats)
- vm1_ret_stats = self.calculate_stats(vm1_start_stats, vm1_end_stats)
+ # get vm1 port stats
+ vm1_start_stats = self.vm1_testpmd.get_pmd_stats(self.port_id_0)
- self.verify(vm1_ret_stats['RX-packets'] == vm0_ret_stats['TX-packets'],
- "Downlink mirror failed between VM0 and VM1 " +
- "when set uplink and downlink mirror!")
+ # send packets
+ self.send_packet(self.vm_dut_0, self.vm0_dut_ports, self.port_id_0, count=packet_num)
- self.vm0_testpmd.execute_cmd('stop')
- self.vm0_testpmd.execute_cmd('set fwd mac')
- self.vm0_testpmd.execute_cmd('start')
-
- vm1_start_stats = self.vm1_testpmd.get_pmd_stats(port_id_0)
- self.send_packet(
- self.vm_dut_0,
- self.vm0_dut_ports,
- port_id_0,
- count=packet_num)
- vm1_end_stats = self.vm1_testpmd.get_pmd_stats(port_id_0)
+ # get vm1 port stats
+ vm1_end_stats = self.vm1_testpmd.get_pmd_stats(self.port_id_0)
+ # verify vm1 receive packets
vm1_ret_stats = self.calculate_stats(vm1_start_stats, vm1_end_stats)
- self.verify(vm1_ret_stats['RX-packets'] == 2 * packet_num,
- "Uplink and down link mirror failed between VM0 and VM1 " +
- "when set uplink and downlink mirror!")
-
- self.reset_port_all_mirror_rule(port_id_0)
+ self.verify(vm1_ret_stats['RX-packets'] == packet_num * 2, "Set uplink and downlink mirror failed!")
def test_two_vms_vlan_and_pool_and_uplink_and_downlink(self):
- self.vm0_testpmd.execute_cmd('vlan set strip on 0')
- self.vm1_testpmd.execute_cmd('vlan set strip on 0')
- self.vm0_testpmd.execute_cmd('stop')
- self.vm1_testpmd.execute_cmd('stop')
-
- port_id_0 = 0
- vlan_id = 3
+ """
+ Test Case8: Mirror Traffic between 2VMs with Vlan & with up link mirroring & down link mirroring
+ """
+ vlan_id = random.randint(1, 4095)
vf_mask = '0x2'
packet_num = 1
- self.set_port_downlink_mirror(port_id_0, 'dst-pool 1 on')
- self.set_port_uplink_mirror(port_id_0, 'dst-pool 1 on')
- self.host_testpmd.execute_cmd("rx_vlan add %d port %d vf %s" %
- (vlan_id, port_id_0, vf_mask))
- self.set_port_vlan_mirror(port_id_0, '%d dst-pool 0 on' % vlan_id)
- self.set_port_pool_mirror(port_id_0, '0x1 dst-pool 1 on')
+ # set up common 2VM prerequisites
+ self.setup_two_vm_common_prerequisite(fwd0="mac", fwd1="rxonly")
- self.vm1_testpmd.execute_cmd('set fwd rxonly')
- self.vm1_testpmd.execute_cmd('start')
- vm1_start_stats = self.vm1_testpmd.get_pmd_stats(port_id_0)
- vm0_start_stats = self.vm0_testpmd.get_pmd_stats(port_id_0)
- self.vm0_testpmd.execute_cmd('start tx_first')
- vm0_end_stats = self.vm0_testpmd.get_pmd_stats(port_id_0)
- vm1_end_stats = self.vm1_testpmd.get_pmd_stats(port_id_0)
+ # set mirror rule
+ self.set_port_pool_mirror(self.port_id_0, '0x1 dst-pool 1 on')
+ self.set_port_downlink_mirror(self.port_id_0, 'dst-pool 1 on')
- vm0_ret_stats = self.calculate_stats(vm0_start_stats, vm0_end_stats)
- vm1_ret_stats = self.calculate_stats(vm1_start_stats, vm1_end_stats)
+ if self.nic.startswith('niantic'):
+ self.set_port_uplink_mirror(self.port_id_0, 'dst-pool 1 on')
- self.verify(vm1_ret_stats['RX-packets'] == vm0_ret_stats['TX-packets'],
- "Downlink mirror failed between VM0 and VM1 " +
- "when set vlan, pool, uplink and downlink mirror!")
+ # get vm port stats
+ vm1_start_stats = self.vm1_testpmd.get_pmd_stats(self.port_id_0)
+ vm0_start_stats = self.vm0_testpmd.get_pmd_stats(self.port_id_0)
- self.vm0_testpmd.execute_cmd('stop')
- self.vm0_testpmd.execute_cmd('set fwd mac')
- self.vm0_testpmd.execute_cmd('start')
- vm0_start_stats = self.vm0_testpmd.get_pmd_stats(port_id_0)
- vm1_start_stats = self.vm1_testpmd.get_pmd_stats(port_id_0)
- self.send_packet(
- self.vm_dut_0,
- self.vm0_dut_ports,
- port_id_0,
- count=packet_num)
- vm0_end_stats = self.vm0_testpmd.get_pmd_stats(port_id_0)
- vm1_end_stats = self.vm1_testpmd.get_pmd_stats(port_id_0)
+ # send packets
+ self.vm0_testpmd.execute_cmd('stop')
+ self.vm0_testpmd.execute_cmd('set fwd rxonly')
+ self.vm0_testpmd.execute_cmd('start tx_first')
- vm0_ret_stats = self.calculate_stats(vm0_start_stats, vm0_end_stats)
- vm1_ret_stats = self.calculate_stats(vm1_start_stats, vm1_end_stats)
+ # get vm port stats
+ vm0_end_stats = self.vm0_testpmd.get_pmd_stats(self.port_id_0)
+ vm1_end_stats = self.vm1_testpmd.get_pmd_stats(self.port_id_0)
- self.verify(self.vm0_testpmd.check_tx_bytes(vm0_ret_stats['RX-packets'], packet_num) and
- self.vm0_testpmd.check_tx_bytes(vm0_ret_stats['TX-packets'], packet_num) and
- self.vm0_testpmd.check_tx_bytes(vm1_ret_stats['RX-packets'], 2 * packet_num),
- "Uplink and downlink mirror failed between VM0 and VM1 " +
- "when set vlan, pool, uplink and downlink mirror!")
+ # verify vm1 receive packets
+ vm0_ret_stats = self.calculate_stats(vm0_start_stats, vm0_end_stats)
+ vm1_ret_stats = self.calculate_stats(vm1_start_stats, vm1_end_stats)
- self.vm0_testpmd.execute_cmd('stop')
- self.vm0_testpmd.execute_cmd('set fwd mac')
- self.vm0_testpmd.execute_cmd('start')
+ self.verify(vm1_ret_stats['RX-packets'] == vm0_ret_stats['TX-packets'], "uplink &downlink mirror failed between VM0 and VM1")
+
+ # set vlan mirror rule
+ self.host_testpmd.execute_cmd("rx_vlan add %d port %d vf %s" % (vlan_id, self.port_id_0, vf_mask))
+ self.set_port_vlan_mirror(self.port_id_0, '%d dst-pool 0 on' % vlan_id)
+ # get vm port stats
+ vm0_start_stats = self.vm0_testpmd.get_pmd_stats(self.port_id_0)
+ vm1_start_stats = self.vm1_testpmd.get_pmd_stats(self.port_id_0)
+
+ # send packets
ether_ip = {}
ether_ip['vlan'] = {'vlan': '%d' % vlan_id}
- vm1_start_stats = self.vm1_testpmd.get_pmd_stats(port_id_0)
- vm0_start_stats = self.vm0_testpmd.get_pmd_stats(port_id_0)
self.send_packet(
self.vm_dut_1,
self.vm1_dut_ports,
- port_id_0,
+ self.port_id_0,
count=packet_num,
**ether_ip)
- vm0_end_stats = self.vm0_testpmd.get_pmd_stats(port_id_0)
- vm1_end_stats = self.vm1_testpmd.get_pmd_stats(port_id_0)
+ # get vm port stats
+ vm0_end_stats = self.vm0_testpmd.get_pmd_stats(self.port_id_0)
+ vm1_end_stats = self.vm1_testpmd.get_pmd_stats(self.port_id_0)
+ # verify vm1 receive packets
vm0_ret_stats = self.calculate_stats(vm0_start_stats, vm0_end_stats)
vm1_ret_stats = self.calculate_stats(vm1_start_stats, vm1_end_stats)
- self.verify(self.vm0_testpmd.check_tx_bytes(vm0_ret_stats['RX-packets'], packet_num) and
- self.vm0_testpmd.check_tx_bytes(vm0_ret_stats['TX-packets'], packet_num) and
- vm1_ret_stats['RX-packets'] == 2 * packet_num,
- "Vlan and downlink mirror failed between VM0 and VM1 " +
- "when set vlan, pool, uplink and downlink mirror!")
- self.host_testpmd.execute_cmd("rx_vlan rm %d port %d vf %s" %
- (vlan_id, port_id_0, vf_mask))
- self.reset_port_all_mirror_rule(port_id_0)
+ try:
+ if self.nic.startswith('niantic'):
+ self.verify(vm0_ret_stats['RX-packets'] == packet_num and vm1_ret_stats['RX-packets'] == packet_num,
+ "vlan mirror failed between VM0 and VM1")
+ else:
+ self.verify(vm0_ret_stats['RX-packets'] == packet_num and vm1_ret_stats['RX-packets'] == 2 * packet_num,
+ "vlan&downlink mirror failed between VM0 and VM1")
+ except:
+ self.host_testpmd.execute_cmd("rx_vlan rm %d port %d vf %s" % (vlan_id, self.port_id_0, vf_mask))
+ raise ("vlan mirror or downlink mirror failed between VM0 and VM1")
+
+ # get vm port stats
+ vm0_start_stats = self.vm0_testpmd.get_pmd_stats(self.port_id_0)
+ vm1_start_stats = self.vm1_testpmd.get_pmd_stats(self.port_id_0)
+ # send packets
+ self.send_packet(
+ self.vm_dut_0,
+ self.vm0_dut_ports,
+ self.port_id_0,
+ count=packet_num)
+ # get vm port stats
+ vm0_end_stats = self.vm0_testpmd.get_pmd_stats(self.port_id_0)
+ vm1_end_stats = self.vm1_testpmd.get_pmd_stats(self.port_id_0)
+
+ # reset pf vlan
+ self.host_testpmd.execute_cmd("rx_vlan rm %d port %d vf %s" % (vlan_id, self.port_id_0, vf_mask))
+
+ # verify vm1 receive packets
+ vm0_ret_stats = self.calculate_stats(vm0_start_stats, vm0_end_stats)
+ vm1_ret_stats = self.calculate_stats(vm1_start_stats, vm1_end_stats)
+ self.verify(vm0_ret_stats['RX-packets'] == packet_num and vm0_ret_stats['TX-packets'] == packet_num and
+ vm1_ret_stats['RX-packets'] == packet_num, "uplink mirror failed between VM0 and VM1")
def test_two_vms_add_multi_exact_mac_on_vf(self):
- port_id_0 = 0
vf_num = 0
packet_num = 10
@@ -990,18 +887,18 @@ class TestSriovKvm(TestCase):
set_mac_cmd = "mac_addr add port %d vf %d %s"
elif self.nic.startswith('fortville') or self.nic.startswith('fortpark'):
set_mac_cmd = "set port %d vf %d %s exact-mac-vlan on"
- self.host_testpmd.execute_cmd(set_mac_cmd % (port_id_0, vf_num, vf_mac))
+ self.host_testpmd.execute_cmd(set_mac_cmd % (self.port_id_0, vf_num, vf_mac))
- vm0_start_stats = self.vm0_testpmd.get_pmd_stats(port_id_0)
+ vm0_start_stats = self.vm0_testpmd.get_pmd_stats(self.port_id_0)
ether_ip = {}
ether_ip['ether'] = {'dest_mac': '%s' % vf_mac}
self.send_packet(
self.vm_dut_0,
self.vm0_dut_ports,
- port_id_0,
+ self.port_id_0,
count=packet_num,
**ether_ip)
- vm0_end_stats = self.vm0_testpmd.get_pmd_stats(port_id_0)
+ vm0_end_stats = self.vm0_testpmd.get_pmd_stats(self.port_id_0)
vm0_ret_stats = self.calculate_stats(
vm0_start_stats, vm0_end_stats)
@@ -1011,29 +908,28 @@ class TestSriovKvm(TestCase):
"when add multi exact MAC address on VF!")
def test_two_vms_enalbe_or_disable_one_uta_mac_on_vf(self):
- self.verify(self.nic.startswith('fortville') == False, "NIC is [%s], skip this case" %self.nic)
+ self.verify(self.nic.startswith('fortville') == False, "NIC is [%s], skip this case" % self.nic)
if self.nic.startswith('fortville'):
- self.dut.logger.warning("NIC is [%s], skip this case" %self.nic)
+ self.dut.logger.warning("NIC is [%s], skip this case" % self.nic)
return
- port_id_0 = 0
vf_mac = "00:11:22:33:44:55"
packet_num = 10
- self.host_testpmd.execute_cmd('set promisc %d on' % port_id_0)
+ self.host_testpmd.execute_cmd('set promisc %d on' % self.port_id_0)
self.host_testpmd.execute_cmd(
- 'set port %d vf 0 rxmode ROPE on' % port_id_0)
+ 'set port %d vf 0 rxmode ROPE on' % self.port_id_0)
self.host_testpmd.execute_cmd(
- 'set port %d vf 1 rxmode ROPE off' % port_id_0)
+ 'set port %d vf 1 rxmode ROPE off' % self.port_id_0)
self.host_testpmd.execute_cmd(
- 'set port %d uta %s on' % (port_id_0, vf_mac))
+ 'set port %d uta %s on' % (self.port_id_0, vf_mac))
- vm0_start_stats = self.vm0_testpmd.get_pmd_stats(port_id_0)
+ vm0_start_stats = self.vm0_testpmd.get_pmd_stats(self.port_id_0)
ether_ip = {}
ether_ip['ether'] = {'dest_mac': '%s' % vf_mac}
- self.send_packet(self.vm_dut_0, self.vm0_dut_ports, port_id_0,
+ self.send_packet(self.vm_dut_0, self.vm0_dut_ports, self.port_id_0,
count=packet_num, **ether_ip)
- vm0_end_stats = self.vm0_testpmd.get_pmd_stats(port_id_0)
+ vm0_end_stats = self.vm0_testpmd.get_pmd_stats(self.port_id_0)
vm0_ret_stats = self.calculate_stats(vm0_start_stats, vm0_end_stats)
@@ -1041,16 +937,16 @@ class TestSriovKvm(TestCase):
"Enable one uta MAC failed between VM0 and VM1 " +
"when enable or disable one uta MAC address on VF!")
- self.host_testpmd.execute_cmd('set promisc %d off' % port_id_0)
+ self.host_testpmd.execute_cmd('set promisc %d off' % self.port_id_0)
self.host_testpmd.execute_cmd(
- 'set port %d vf 0 rxmode ROPE off' % port_id_0)
+ 'set port %d vf 0 rxmode ROPE off' % self.port_id_0)
- vm0_start_stats = self.vm0_testpmd.get_pmd_stats(port_id_0)
+ vm0_start_stats = self.vm0_testpmd.get_pmd_stats(self.port_id_0)
ether_ip = {}
ether_ip['ether'] = {'dest_mac': '%s' % vf_mac}
- self.send_packet(self.vm_dut_0, self.vm0_dut_ports, port_id_0,
+ self.send_packet(self.vm_dut_0, self.vm0_dut_ports, self.port_id_0,
count=packet_num, invert_verify=True, **ether_ip)
- vm0_end_stats = self.vm0_testpmd.get_pmd_stats(port_id_0)
+ vm0_end_stats = self.vm0_testpmd.get_pmd_stats(self.port_id_0)
vm0_ret_stats = self.calculate_stats(vm0_start_stats, vm0_end_stats)
@@ -1059,27 +955,26 @@ class TestSriovKvm(TestCase):
"when enable or disable one uta MAC address on VF!")
def test_two_vms_add_multi_uta_mac_on_vf(self):
- self.verify(self.nic.startswith('fortville') == False, "NIC is [%s], skip this case" %self.nic)
+ self.verify(self.nic.startswith('fortville') == False, "NIC is [%s], skip this case" % self.nic)
if self.nic.startswith('fortville'):
- self.dut.logger.warning("NIC is [%s], skip this case" %self.nic)
+ self.dut.logger.warning("NIC is [%s], skip this case" % self.nic)
return
- port_id_0 = 0
packet_num = 10
for vf_mac in ["00:55:44:33:22:11", "00:55:44:33:22:66"]:
self.host_testpmd.execute_cmd("set port %d uta %s on" %
- (port_id_0, vf_mac))
+ (self.port_id_0, vf_mac))
self.host_testpmd.execute_cmd("set port %d uta %s on" %
- (port_id_0, vf_mac))
+ (self.port_id_0, vf_mac))
for vf_mac in ["00:55:44:33:22:11", "00:55:44:33:22:66"]:
- vm0_start_stats = self.vm0_testpmd.get_pmd_stats(port_id_0)
+ vm0_start_stats = self.vm0_testpmd.get_pmd_stats(self.port_id_0)
ether_ip = {}
ether_ip['ether'] = {'dest_mac': '%s' % vf_mac}
self.send_packet(self.vm_dut_0, self.vm0_dut_ports,
- port_id_0, count=packet_num, **ether_ip)
- vm0_end_stats = self.vm0_testpmd.get_pmd_stats(port_id_0)
+ self.port_id_0, count=packet_num, **ether_ip)
+ vm0_end_stats = self.vm0_testpmd.get_pmd_stats(self.port_id_0)
vm0_ret_stats = self.calculate_stats(
vm0_start_stats, vm0_end_stats)
@@ -1089,29 +984,28 @@ class TestSriovKvm(TestCase):
"when add multi uta MAC address on VF!")
def test_two_vms_add_or_remove_uta_mac_on_vf(self):
- self.verify(self.nic.startswith('fortville') == False, "NIC is [%s], skip this case" %self.nic)
+ self.verify(self.nic.startswith('fortville') == False, "NIC is [%s], skip this case" % self.nic)
if self.nic.startswith('fortville'):
- self.dut.logger.warning("NIC is [%s], skip this case" %self.nic)
+ self.dut.logger.warning("NIC is [%s], skip this case" % self.nic)
return
- port_id_0 = 0
vf_mac = "00:55:44:33:22:11"
packet_num = 10
for switch in ['on', 'off', 'on']:
self.host_testpmd.execute_cmd("set port %d uta %s %s" %
- (port_id_0, vf_mac, switch))
+ (self.port_id_0, vf_mac, switch))
- vm0_start_stats = self.vm0_testpmd.get_pmd_stats(port_id_0)
+ vm0_start_stats = self.vm0_testpmd.get_pmd_stats(self.port_id_0)
ether_ip = {}
ether_ip['ether'] = {'dest_mac': '%s' % vf_mac}
if switch == 'on':
self.send_packet(self.vm_dut_0, self.vm0_dut_ports,
- port_id_0, count=packet_num, **ether_ip)
+ self.port_id_0, count=packet_num, **ether_ip)
else:
- self.send_packet(self.vm_dut_0, self.vm0_dut_ports, port_id_0,
+ self.send_packet(self.vm_dut_0, self.vm0_dut_ports, self.port_id_0,
count=packet_num, invert_verify=True, **ether_ip)
- vm0_end_stats = self.vm0_testpmd.get_pmd_stats(port_id_0)
+ vm0_end_stats = self.vm0_testpmd.get_pmd_stats(self.port_id_0)
vm0_ret_stats = self.calculate_stats(
vm0_start_stats, vm0_end_stats)
@@ -1126,26 +1020,25 @@ class TestSriovKvm(TestCase):
"when add or remove multi uta MAC address on VF!")
def test_two_vms_pause_rx_queues(self):
- self.verify(self.nic.startswith('fortville') == False, "NIC is [%s], skip this case" %self.nic)
+ self.verify(self.nic.startswith('fortville') == False, "NIC is [%s], skip this case" % self.nic)
if self.nic.startswith('fortville'):
- self.dut.logger.warning("NIC is [%s], skip this case" %self.nic)
+ self.dut.logger.warning("NIC is [%s], skip this case" % self.nic)
return
- port_id_0 = 0
packet_num = 10
for switch in ['on', 'off', 'on']:
self.host_testpmd.execute_cmd("set port %d vf 0 rx %s" %
- (port_id_0, switch))
+ (self.port_id_0, switch))
- vm0_start_stats = self.vm0_testpmd.get_pmd_stats(port_id_0)
+ vm0_start_stats = self.vm0_testpmd.get_pmd_stats(self.port_id_0)
if switch == 'on':
self.send_packet(self.vm_dut_0, self.vm0_dut_ports,
- port_id_0, count=packet_num)
+ self.port_id_0, count=packet_num)
else:
- self.send_packet(self.vm_dut_0, self.vm0_dut_ports, port_id_0,
+ self.send_packet(self.vm_dut_0, self.vm0_dut_ports, self.port_id_0,
count=packet_num, invert_verify=True)
- vm0_end_stats = self.vm0_testpmd.get_pmd_stats(port_id_0)
+ vm0_end_stats = self.vm0_testpmd.get_pmd_stats(self.port_id_0)
vm0_ret_stats = self.calculate_stats(
vm0_start_stats, vm0_end_stats)
@@ -1160,29 +1053,27 @@ class TestSriovKvm(TestCase):
"when enable or pause RX queues on VF!")
def test_two_vms_pause_tx_queuse(self):
- self.verify(self.nic.startswith('fortville') == False, "NIC is [%s], skip this case" %self.nic)
+ self.verify(self.nic.startswith('fortville') == False, "NIC is [%s], skip this case" % self.nic)
if self.nic.startswith('fortville'):
- self.dut.logger.warning("NIC is [%s], skip this case" %self.nic)
+ self.dut.logger.warning("NIC is [%s], skip this case" % self.nic)
return
self.vm0_testpmd.execute_cmd("stop")
self.vm0_testpmd.execute_cmd("set fwd mac")
self.vm0_testpmd.execute_cmd("start")
- port_id_0 = 0
packet_num = 10
for switch in ['on', 'off', 'on']:
- self.host_testpmd.execute_cmd("set port %d vf 0 tx %s" %
- (port_id_0, switch))
+ self.host_testpmd.execute_cmd("set port %d vf 0 tx %s" % (self.port_id_0, switch))
- vm0_start_stats = self.vm0_testpmd.get_pmd_stats(port_id_0)
+ vm0_start_stats = self.vm0_testpmd.get_pmd_stats(self.port_id_0)
self.send_packet(
self.vm_dut_0,
self.vm0_dut_ports,
- port_id_0,
+ self.port_id_0,
count=packet_num)
- vm0_end_stats = self.vm0_testpmd.get_pmd_stats(port_id_0)
+ vm0_end_stats = self.vm0_testpmd.get_pmd_stats(self.port_id_0)
vm0_ret_stats = self.calculate_stats(
vm0_start_stats, vm0_end_stats)
@@ -1197,29 +1088,28 @@ class TestSriovKvm(TestCase):
"when enable or pause TX queues on VF!")
def test_two_vms_prevent_rx_broadcast_on_vf(self):
- self.verify(self.nic.startswith('fortville') == False, "NIC is [%s], skip this case" %self.nic)
+ self.verify(self.nic.startswith('fortville') == False, "NIC is [%s], skip this case" % self.nic)
if self.nic.startswith('fortville'):
- self.dut.logger.warning("NIC is [%s], skip this case" %self.nic)
+ self.dut.logger.warning("NIC is [%s], skip this case" % self.nic)
return
- port_id_0 = 0
vf_mac = "FF:FF:FF:FF:FF:FF"
packet_num = 10
for switch in ['on', 'off', 'on']:
self.host_testpmd.execute_cmd("set port %d vf 0 rxmode BAM %s" %
- (port_id_0, switch))
+ (self.port_id_0, switch))
- vm0_start_stats = self.vm0_testpmd.get_pmd_stats(port_id_0)
+ vm0_start_stats = self.vm0_testpmd.get_pmd_stats(self.port_id_0)
ether_ip = {}
ether_ip['ether'] = {'dest_mac': '%s' % vf_mac}
if switch == 'on':
- self.send_packet(self.vm_dut_0, self.vm0_dut_ports, port_id_0,
+ self.send_packet(self.vm_dut_0, self.vm0_dut_ports, self.port_id_0,
count=packet_num, **ether_ip)
else:
- self.send_packet(self.vm_dut_0, self.vm0_dut_ports, port_id_0,
+ self.send_packet(self.vm_dut_0, self.vm0_dut_ports, self.port_id_0,
count=packet_num, invert_verify=True, **ether_ip)
- vm0_end_stats = self.vm0_testpmd.get_pmd_stats(port_id_0)
+ vm0_end_stats = self.vm0_testpmd.get_pmd_stats(self.port_id_0)
vm0_ret_stats = self.calculate_stats(
vm0_start_stats, vm0_end_stats)
@@ -1261,8 +1151,11 @@ class TestSriovKvm(TestCase):
error, "Execute command '%s' successfully, it should be failed!" % command)
def tear_down(self):
- self.vm0_testpmd.execute_cmd('quit', '# ')
- self.vm1_testpmd.execute_cmd('quit', '# ')
+ self.reset_port_all_mirror_rule(self.port_id_0)
+ self.vm0_testpmd.execute_cmd('clear port stats all')
+ self.vm1_testpmd.execute_cmd('clear port stats all')
+ self.vm0_testpmd.execute_cmd('stop')
+ self.vm1_testpmd.execute_cmd('stop')
time.sleep(1)
def tear_down_all(self):
@@ -1270,22 +1163,10 @@ class TestSriovKvm(TestCase):
self.destroy_two_vm_common_prerequisite()
if self.setup_2vm_2vf_env_flag == 1:
self.destroy_2vm_2vf_env()
-
- if self.setup_2vm_2pf_env_flag == 1:
- self.destroy_2vm_2pf_env()
-
- if self.setup_4vm_prerequisite_flag == 1:
- self.destroy_four_vm_common_prerequisite()
- if self.setup_4vm_4vf_env_flag == 1:
- self.destroy_4vm_4vf_env()
if getattr(self, 'vm0', None):
self.vm0.stop()
if getattr(self, 'vm1', None):
self.vm1.stop()
- if getattr(self, 'vm2', None):
- self.vm2.stop()
- if getattr(self, 'vm3', None):
- self.vm3.stop()
self.dut.virt_exit()
--
2.17.0
reply other threads:[~2019-10-12 8:37 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191012203741.3276-1-xiaoxiaox.zeng@intel.com \
--to=xiaoxiaox.zeng@intel.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).