test suite reviews and discussions
 help / color / mirror / Atom feed
* [dts] [PATCH V2] Add flexible RXd test plan
@ 2019-12-20  5:57 Chen, Zhaoyan
  2019-12-20  8:10 ` Tu, Lijuan
  0 siblings, 1 reply; 2+ messages in thread
From: Chen, Zhaoyan @ 2019-12-20  5:57 UTC (permalink / raw)
  To: dts; +Cc: Chen, Zhaoyan

V2:
Remove some whitespace trails

V1:
Add flexible RXd test plan

---
 test_plans/flexible_rxd_test_plan.rst | 343 ++++++++++++++++++++++++++++++++++
 1 file changed, 343 insertions(+)
 create mode 100644 test_plans/flexible_rxd_test_plan.rst

diff --git a/test_plans/flexible_rxd_test_plan.rst b/test_plans/flexible_rxd_test_plan.rst
new file mode 100644
index 0000000..87f27d5
--- /dev/null
+++ b/test_plans/flexible_rxd_test_plan.rst
@@ -0,0 +1,343 @@
+.. Copyright (c) <2019> Intel Corporation
+   All rights reserved
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+
+   - Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+
+   - Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in
+     the documentation and/or other materials provided with the
+     distribution.
+
+   - Neither the name of Intel Corporation nor the names of its
+     contributors may be used to endorse or promote products derived
+     from this software without specific prior written permission.
+
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+   FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+   COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+   INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+   SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+   STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+   OF THE POSSIBILITY OF SUCH DAMAGE.
+
+========================
+Flexible RXd Test Suites
+========================
+
+
+Description
+===========
+
+The test suite will cover the flexible RX descriptor on Intel E810
+network interface card.
+
+
+Prerequisites
+=============
+
+Copy correct ``ice.pkg`` into ``/usr/lib/firmware/intel/ice/ddp/``, \
+For the test cases, comms package is expected.
+
+Prepare test toplogoy, in the test case, it requires
+
+- 1 Intel E810 interface
+- 1 network interface for sending test packet,
+  which could be connect to the E810 interface
+- Directly connect the 2 interfaces
+
+Patch testpmd for dumping flexible fields from RXD::
+
+  diff --git a/app/test-pmd/util.c b/app/test-pmd/util.c
+  index a1164b7..b90344d 100644
+  --- a/app/test-pmd/util.c
+  +++ b/app/test-pmd/util.c
+  @@ -10,6 +10,7 @@
+  #include <rte_ether.h>
+  #include <rte_ethdev.h>
+  #include <rte_flow.h>
+  +#include <rte_pmd_ice.h>
+
+
+  #include "testpmd.h"
+
+
+  @@ -73,6 +74,9 @@ dump_pkt_burst(uint16_t port_id, uint16_t queue, struct rte_mbuf *pkts[],
+                                  printf("hash=0x%x ID=0x%x ",
+                                         mb->hash.fdir.hash, mb->hash.fdir.id);
+                  }
+  +               rte_net_ice_dump_proto_xtr_metadata(mb);
+                  if (ol_flags & PKT_RX_TIMESTAMP)
+                          printf(" - timestamp %"PRIu64" ", mb->timestamp);
+                  if (ol_flags & PKT_RX_QINQ)
+
+
+Compile DPDK and testpmd::
+
+  make install -j T=x86_64-native-linuxapp-gcc
+
+Bind Intel E810 interface to igb_uio driver, (e.g. 0000:18:00.0) ::
+
+  ./usertools/dpdk-devbind.py -b igb_uio 18:00.0
+
+
+
+Test Case 01: Check single VLAN fields in RXD (802.1Q)
+======================================================
+
+Launch testpmd by::
+
+  ./x86_64-native-linux-gcc/app/testpmd -l 6-9 -n 4 -w 18:00.0,proto_xtr=vlan -- -i --rxq=32 --txq=32 --portmask=0x1 --nb-cores=2
+
+  testpmd>set verbose 1
+  testpmd>set fwd io
+  testpmd>start
+
+Please change the core setting (-l option) and port's PCI (-w option) \
+by your DUT environment
+
+Send a packet with VLAN tag from test network interface::
+
+  scapy #launch scapy in shell
+
+  #In scapy interactive UI
+  p = Ether(src="3c:fd:fe:c0:e1:8c", dst="00:00:00:00:01:02", type=0x8100)/Dot1Q(prio=1,vlan=23)/IP()/UDP()/DNS()
+  sendp(p, iface='enp175s0f0', count=1)
+
+Please notice
+
+- Change ethernet source address with your test network interface's address
+- Make sure the ethernet destination addres is NOT your real E810 interface's address
+
+Check the output in testpmd, **ctag=1:0:23** is expected, which is consistent with VLAN tag set in test packet::
+
+  testpmd> port 0/queue 28: received 1 packets
+  src=3C:FD:FE:C0:E1:8C - dst=00:00:00:00:01:02 - type=0x8100 - length=60 - nb_segs=1 - RSS hash=0xf31f649c - RSS queue=0x1c - Protocol Extraction:[0x0000:0x2017],vlan,stag=0:0:0,ctag=1:0:23  - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN L4_UDP  - sw ptype: L2_ETHER_VLAN L3_IPV4 L4_UDP  - l2_len=18 - l3_len=20 - l4_len=8 - Receive queue=0x1c
+  ol_flags: PKT_RX_RSS_HASH PKT_RX_L4_CKSUM_GOOD PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
+
+
+Test Case 02: Check single VLAN fields in RXD (802.1ad)
+=======================================================
+
+Test steps are same to ``Test Case 01``, just change the launch command of testpmd, test packet and expected output
+
+Launch testpmd command::
+
+  ./x86_64-native-linux-gcc/app/testpmd -l 6-9 -n 4 -w 18:00.0,proto_xtr=vlan -- -i --rxq=32 --txq=32 --portmask=0x1 --nb-cores=2
+
+Test packet::
+
+  p = Ether(src='3c:fd:fe:bc:f6:78', dst='68:05:ca:a3:13:4c', type=0x88A8)/Dot1Q(prio=1,vlan=23)/IP()/UDP()/DNS()
+
+Expected output in testpmd::
+
+  stag=1:0:23
+
+
+Test Case 03: Check double VLAN fields in RXD (802.1Q) only 1 VLAN tag
+======================================================================
+
+Test steps are same to ``Test Case 01``, just change the launch command of testpmd, test packet and expected output
+
+Launch testpmd command::
+
+  ./x86_64-native-linux-gcc/app/testpmd -l 6-9 -n 4 -w 18:00.0,proto_xtr=vlan -- -i --rxq=32 --txq=32 --portmask=0x1 --nb-cores=2
+
+Test packet::
+
+  p = Ether(src='3c:fd:fe:bc:f6:78', dst='68:05:ca:a3:13:4c', type=0x9100)/Dot1Q(prio=1,vlan=23)/IP()/UDP()/DNS()
+
+Expected output in testpmd::
+
+  stag=1:0:23
+
+
+Test Case 04: Check double VLAN fields in RXD (802.1Q) 2 VLAN tags
+==================================================================
+
+Test steps are same to ``Test Case 01``, just change the launch command of testpmd, test packet and expected output
+
+Launch testpmd command::
+
+  ./x86_64-native-linux-gcc/app/testpmd -l 6-9 -n 4 -w 18:00.0,proto_xtr=vlan -- -i --rxq=32 --txq=32 --portmask=0x1 --nb-cores=2
+
+Test packet::
+
+  p = Ether(src='3c:fd:fe:bc:f6:78', dst='68:05:ca:a3:13:4c', type=0x9100)/Dot1Q(prio=1,vlan=23)/Dot1Q(prio=4,vlan=56)/IP()/UDP()/DNS()
+
+Expected output in testpmd::
+
+  stag=1:0:23
+  ctag=4:0:56
+
+
+Test Case 05: Check double VLAN fields in RXD (802.1ad)
+=======================================================
+
+Test steps are same to ``Test Case 01``, just change the launch command of testpmd, test packet and expected output
+
+Launch testpmd command::
+
+  ./x86_64-native-linux-gcc/app/testpmd -l 6-9 -n 4 -w 18:00.0,proto_xtr=vlan -- -i --rxq=32 --txq=32 --portmask=0x1 --nb-cores=2
+
+Test packet::
+
+  p = Ether(src='3c:fd:fe:bc:f6:78', dst='68:05:ca:a3:13:4c', type=0x88A8)/Dot1Q(prio=1,vlan=23)/Dot1Q(prio=4,vlan=56)/IP()/UDP()/DNS()
+
+Expected output in testpmd::
+
+  stag=1:0:23
+  ctag=4:0:56
+
+
+Test Case 06: Check IPv4 fields in RXD
+======================================
+
+Test steps are same to ``Test Case 01``, just change the launch command of testpmd, test packet and expected output
+
+Launch testpmd command::
+
+  ./x86_64-native-linux-gcc/app/testpmd -l 6-9 -n 4 -w 18:00.0,proto_xtr=ipv4 -- -i --rxq=32 --txq=32 --portmask=0x1 --nb-cores=2
+
+Test packet::
+
+  p = Ether(src='3c:fd:fe:bc:f6:78', dst='68:05:ca:a3:13:4c')/IP(tos=23,ttl=98)/UDP()/Raw(load='XXXXXXXXXX')
+
+Expected output in testpmd::
+  
+  ver=4
+  hdrlen=5
+  tos=23
+  ttl=98
+  proto=17
+
+
+Test Case 07: Check IPv6 fields in RXD 
+=======================================================
+
+Test steps are same to ``Test Case 01``, just change the launch command of testpmd, test packet and expected output
+
+Launch testpmd command::
+
+  ./x86_64-native-linux-gcc/app/testpmd -l 6-9 -n 4 -w 18:00.0,proto_xtr=ipv6 -- -i --rxq=32 --txq=32 --portmask=0x1 --nb-cores=2
+
+Test packet::
+
+  p = Ether(src='3c:fd:fe:bc:f6:78', dst='68:05:ca:a3:13:4c')/IPv6(tc=12,hlim=34,fl=0x98765)/UDP()/Raw(load='XXXXXXXXXX')
+
+Expected output in testpmd::
+
+  ver=6
+  tc=12
+  flow_hi4=0x9
+  nexthdr=17
+  hoplimit=34
+
+
+Test Case 08: Check IPv6 flow field in RXD
+=======================================================
+
+Test steps are same to ``Test Case 01``, just change the launch command of testpmd, test packet and expected output
+
+Launch testpmd command::
+
+  ./x86_64-native-linux-gcc/app/testpmd -l 6-9 -n 4 -w 18:00.0,proto_xtr=ipv6_flow -- -i --rxq=32 --txq=32 --portmask=0x1 --nb-cores=2
+
+Test packet::
+
+  p = Ether(src='3c:fd:fe:bc:f6:78', dst='68:05:ca:a3:13:4c')/IPv6(tc=12,hlim=34,fl=0x98765)/UDP()/Raw(load='XXXXXXXXXX')
+
+Expected output in testpmd::
+
+  ver=6
+  tc=12
+  flow=0x98765
+
+
+Test Case 09: Check TCP fields in IPv4 in RXD
+=======================================================
+
+Test steps are same to ``Test Case 01``, just change the launch command of testpmd, test packet and expected output
+
+Launch testpmd command::
+
+  ./x86_64-native-linux-gcc/app/testpmd -l 6-9 -n 4 -w 18:00.0,proto_xtr=tcp -- -i --rxq=32 --txq=32 --portmask=0x1 --nb-cores=2
+
+Test packet::
+
+  p = Ether(src='3c:fd:fe:bc:f6:78', dst='68:05:ca:a3:13:4c')/IP()/TCP(flags='AS')/Raw(load='XXXXXXXXXX')
+
+Expected output in testpmd::
+
+  doff=5
+  flags=AS
+
+
+Test Case 10: Check TCP fields in IPv6 in RXD
+=======================================================
+
+Test steps are same to ``Test Case 01``, just change the launch command of testpmd, test packet and expected output
+
+Launch testpmd command::
+
+  ./x86_64-native-linux-gcc/app/testpmd -l 6-9 -n 4 -w 18:00.0,proto_xtr=tcp -- -i --rxq=32 --txq=32 --portmask=0x1 --nb-cores=2
+
+Test packet::
+
+  p = Ether(src='3c:fd:fe:bc:f6:78', dst='68:05:ca:a3:13:4c')/IPv6()/TCP(flags='S')/Raw(load='XXXXXXXXXX')
+
+Expected output in testpmd::
+
+  doff=5
+  flags=S
+
+
+Test Case 11: Check IPv4, IPv6, TCP fields in RXD on specific queues
+====================================================================
+
+Test steps are same to ``Test Case 01``, just change the launch command of testpmd, test packet and expected output
+
+Launch testpmd command::
+
+  ./x86_64-native-linux-gcc/app/testpmd -l 6-9 -n 4 -w 18:00.0,proto_xtr='[(2):ipv4,(3):ipv6,(4):tcp]' -- -i --rxq=64 --txq=64 --portmask=0x1
+
+Create generic flow on NIC::
+
+  flow create 0 ingress pattern eth dst is 68:05:ca:a3:13:4c / ipv4 src is 192.168.0.1 dst is 192.168.0.2 tos is 23 ttl is 98 / end actions queue index 2 / end
+  flow create 0 ingress pattern eth / ipv6 src is 2001::3 dst is 2001::4 tc is 8 / end actions queue index 3 / end
+  flow create 0 ingress pattern eth dst is 68:05:ca:8d:ed:a9 / ipv4 src is 192.168.0.1 dst is 192.168.0.2 / tcp src is 25 dst is 23 / end actions queue index 63 / end
+
+Test packet::
+
+  p = Ether(dst="68:05:ca:a3:13:4c")/IP(src="192.168.0.1",dst="192.168.0.2",tos=23,ttl=98)/UDP()/Raw(load='XXXXXXXXXX')
+  p = Ether(src='3c:fd:fe:bc:f6:78', dst='68:05:ca:a3:13:4c')/IPv6(src='2001::3', dst='2001::4', tc=8,hlim=34,fl=0x98765)/UDP()/Raw(load='XXXXXXXXXX')
+  p = Ether(dst='68:05:ca:8d:ed:a9')/IP(src='192.168.0.1', dst='192.168.0.2')/TCP(flags='AS', dport=23, sport=25)/Raw(load='XXXXXXXXXX')
+
+Expected output in testpmd::
+
+  Receive queue=0x2
+  ver=4
+  hdrlen=5
+  tos=23
+  ttl=98
+  proto=17
+
+  Receive queue=0x3
+  ver=6
+  tc=12
+  flow_hi4=0x9
+  nexthdr=17
+  hoplimit=34
+
+  Receive queue=0x3f
+  doff=5
+  flags=AS
\ No newline at end of file
-- 
2.13.0.windows.1


^ permalink raw reply	[flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-12-20  8:10 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-12-20  5:57 [dts] [PATCH V2] Add flexible RXd test plan Chen, Zhaoyan
2019-12-20  8:10 ` Tu, Lijuan

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).