* [dts] [PATCH v1] test_plans: add virtio ci test for performance track
@ 2020-01-12 20:29 Yinan
2020-01-13 7:52 ` Tu, Lijuan
0 siblings, 1 reply; 2+ messages in thread
From: Yinan @ 2020-01-12 20:29 UTC (permalink / raw)
To: dts; +Cc: Wang Yinan
From: Wang Yinan <yinan.wang@intel.com>
add vhost/virtio pvp and loopback basic test for performance track in CI
Signed-off-by: Wang Yinan <yinan.wang@intel.com>
---
test_plans/perf_virtio_user_loopback.rst | 292 +++++++++++++++++++++++
test_plans/perf_virtio_user_pvp.rst | 191 +++++++++++++++
2 files changed, 483 insertions(+)
create mode 100644 test_plans/perf_virtio_user_loopback.rst
create mode 100644 test_plans/perf_virtio_user_pvp.rst
diff --git a/test_plans/perf_virtio_user_loopback.rst b/test_plans/perf_virtio_user_loopback.rst
new file mode 100644
index 0000000..62ca31a
--- /dev/null
+++ b/test_plans/perf_virtio_user_loopback.rst
@@ -0,0 +1,292 @@
+.. Copyright (c) <2019>, Intel Corporation
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in
+ the documentation and/or other materials provided with the
+ distribution.
+
+ - Neither the name of Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived
+ from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ OF THE POSSIBILITY OF SUCH DAMAGE.
+
+===========================================
+vhost/virtio multi-paths loopback test plan
+===========================================
+
+Benchmark vhost/virtio-user loopback test with 9 tx/rx paths.
+Includes split ring mergeable, non-mergeable, vector_rx, inorder mergeable,
+inorder non-mergeable, packed ring mergeable, packed ring non-mergeable，
+packed ring inorder mergeable, packed ring inorder non-mergeable path.
+
+Test Case 1: loopback test with packed ring mergeable path
+==========================================================
+
+1. Launch vhost by below command::
+
+ rm -rf vhost-net*
+ ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem --no-pci \
+ --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+
+2. Launch virtio-user by below command::
+
+ ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
+ --legacy-mem --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_vq=1,mrg_rxbuf=1,in_order=0 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
+ >set fwd mac
+ >start
+
+3. Send packets with vhost-testpmd,[frame_size] is the parameter changs in [64, 1518]::
+
+ testpmd>set txpkts [frame_size]
+ testpmd>start tx_first 32
+
+4. Repeat below command to get throughput 10 times,then check the average throughput can get expected data with below command::
+
+ testpmd>show port stats all
+
+Test Case 2: loopback test with packed ring non-mergeable path
+==============================================================
+
+1. Launch vhost by below command::
+
+ rm -rf vhost-net*
+ ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem --no-pci \
+ --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+
+2. Launch virtio-user by below command::
+
+ ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
+ --legacy-mem --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_vq=1,mrg_rxbuf=0,in_order=0 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
+ >set fwd mac
+ >start
+
+3. Send packets with vhost-testpmd, [frame_size] is the parameter changs in [64, 1518]::
+
+ testpmd>set txpkts [frame_size]
+ testpmd>start tx_first 32
+
+4. Repeat below command to get throughput 10 times,then check the average throughput can get expected data with below command::
+
+ testpmd>show port stats all
+
+Test Case 3: loopback test with packed ring inorder mergeable path
+===================================================================
+
+1. Launch vhost by below command::
+
+ rm -rf vhost-net*
+ ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem --no-pci \
+ --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+
+2. Launch virtio-user by below command::
+
+ ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
+ --legacy-mem --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_vq=1,in_order=1,mrg_rxbuf=1 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
+ >set fwd mac
+ >start
+
+3. Send packets with vhost-testpmd,[frame_size] is the parameter changs in [64, 1518]::
+
+ testpmd>set txpkts [frame_size]
+ testpmd>start tx_first 32
+
+4. Repeat below command to get throughput 10 times,then check the average throughput can get expected data with below command::
+
+ testpmd>show port stats all
+
+Test Case 4: loopback test with packed ring inorder non-mergeable path
+======================================================================
+
+1. Launch vhost by below command::
+
+ rm -rf vhost-net*
+ ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem --no-pci \
+ --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+
+2. Launch virtio-user by below command::
+
+ ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
+ --legacy-mem --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_vq=1,in_order=1,mrg_rxbuf=0 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
+ >set fwd mac
+ >start
+
+3. Send packets with vhost-testpmd,[frame_size] is the parameter changs in [64, 1518]::
+
+ testpmd>set txpkts [frame_size]
+ testpmd>start tx_first 32
+
+4. Repeat below command to get throughput 10 times,then check the average throughput can get expected data with below command::
+
+ testpmd>show port stats all
+
+Test Case 5: loopback test with split ring mergeable path
+==========================================================
+
+1. Launch vhost by below command::
+
+ rm -rf vhost-net*
+ ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem --no-pci \
+ --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+
+2. Launch virtio-user by below command::
+
+ ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
+ --legacy-mem --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,in_order=0,mrg_rxbuf=1 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
+ >set fwd mac
+ >start
+
+3. Send packets with vhost-testpmd,[frame_size] is the parameter changs in [64, 1518]::
+
+ testpmd>set txpkts [frame_size]
+ testpmd>start tx_first 32
+
+4. Repeat below command to get throughput 10 times,then check the average throughput can get expected data with below command::
+
+ testpmd>show port stats all
+
+Test Case 6: loopback test with split ring non-mergeable path
+=============================================================
+
+1. Launch vhost by below command::
+
+ rm -rf vhost-net*
+ ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem --no-pci \
+ --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+
+2. Launch virtio-user by below command::
+
+ ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
+ --legacy-mem --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,in_order=0,mrg_rxbuf=0 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
+ >set fwd mac
+ >start
+
+3. Send packets with vhost-testpmd,[frame_size] is the parameter changs in [64, 1518]::
+
+ testpmd>set txpkts [frame_size]
+ testpmd>start tx_first 32
+
+4. Repeat below command to get throughput 10 times,then check the average throughput can get expected data with below command::
+
+ testpmd>show port stats all
+
+Test Case 7: loopback test with split ring vector_rx path
+=========================================================
+
+1. Launch vhost by below command::
+
+ rm -rf vhost-net*
+ ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem --no-pci \
+ --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+
+2. Launch virtio-user by below command::
+
+ ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
+ --legacy-mem --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,in_order=0,mrg_rxbuf=0 \
+ -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ >set fwd mac
+ >start
+
+3. Send packets with vhost-testpmd,[frame_size] is the parameter changs in [64, 1518]::
+
+ testpmd>set txpkts [frame_size]
+ testpmd>start tx_first 32
+
+4. Repeat below command to get throughput 10 times,then check the average throughput can get expected data with below command::
+
+ testpmd>show port stats all
+
+Test Case 8: loopback test with split ring inorder mergeable path
+=================================================================
+
+1. Launch vhost by below command::
+
+ rm -rf vhost-net*
+ ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem --no-pci \
+ --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+
+2. Launch virtio-user by below command::
+
+ ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
+ --legacy-mem --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,in_order=1,mrg_rxbuf=1 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
+ >set fwd mac
+ >start
+
+3. Send packets with vhost-testpmd,[frame_size] is the parameter changs in [64, 1518]::
+
+ testpmd>set txpkts [frame_size]
+ testpmd>start tx_first 32
+
+4. Repeat below command to get throughput 10 times,then check the average throughput can get expected data with below command::
+
+ testpmd>show port stats all
+
+Test Case 9: loopback test with split ring inorder non-mergeable path
+=====================================================================
+
+1. Launch vhost by below command::
+
+ rm -rf vhost-net*
+ ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem --no-pci \
+ --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+
+2. Launch virtio-user by below command::
+
+ ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
+ --legacy-mem --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,in_order=1,mrg_rxbuf=0 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
+ >set fwd mac
+ >start
+
+3. Send packets with vhost-testpmd,[frame_size] is the parameter changs in [64, 1518]::
+
+ testpmd>set txpkts [frame_size]
+ testpmd>start tx_first 32
+
+4. Repeat below command to get throughput 10 times,then check the average throughput can get expected data with below command::
+
+ testpmd>show port stats all
\ No newline at end of file
diff --git a/test_plans/perf_virtio_user_pvp.rst b/test_plans/perf_virtio_user_pvp.rst
new file mode 100644
index 0000000..11c1550
--- /dev/null
+++ b/test_plans/perf_virtio_user_pvp.rst
@@ -0,0 +1,191 @@
+.. Copyright (c) <2019>, Intel Corporation
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in
+ the documentation and/or other materials provided with the
+ distribution.
+
+ - Neither the name of Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived
+ from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ OF THE POSSIBILITY OF SUCH DAMAGE.
+
+======================================
+vhost/virtio pvp performance test plan
+======================================
+
+Benchmark PVP performance with split ring mergeable path and packed ring mergeable path.
+For basic pvp test，give 1 core for vhost and virtio respectively.
+For virtio single core performance test，give 2 cores for vhost and 1 core for virtio,
+set io fwd at vhost side to lower the vhost workload.
+For vhost single core performance test，give 2 cores for virtio and 1 core for vhost,
+set io fwd at virtio side to lower the virtio workload.
+
+Test flow
+=========
+
+TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
+
+Test Case 1: pvp test with packed ring mergeable path
+=====================================================
+
+1. Bind one port to igb_uio, then launch vhost by below command::
+
+ rm -rf vhost-net*
+ ./testpmd -n 4 -l 2-3 --socket-mem 1024,1024 --legacy-mem \
+ --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' \
+ -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+2. Launch virtio-user by below command::
+
+ ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
+ --legacy-mem --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_vq=1,mrg_rxbuf=1,in_order=0 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --nb-cores=1 --txd=1024 --rxd=1024
+ >set fwd mac
+ >start
+
+3. Send packet with packet generator with different packet size,includes [64, 1518], check the throughput can get expected data with below command::
+
+ testpmd>show port stats all
+
+Test Case 2: virtio single core performance test with packed ring mergeable path
+=================================================================================
+
+1. Bind one port to igb_uio, then launch vhost by below command::
+
+ rm -rf vhost-net*
+ ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
+ --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=2 --txd=1024 --rxd=1024
+ testpmd>set fwd io
+ testpmd>start
+
+2. Launch virtio-user by below command::
+
+ ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
+ --legacy-mem --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_vq=1,mrg_rxbuf=1,in_order=0 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
+ >set fwd mac
+ >start
+
+3. Send packet with packet generator with different packet size,includes [64, 1518], check the throughput can get expected data with below command::
+
+ testpmd>show port stats all
+
+Test Case 3: vhost single core performance test with packed ring mergeable path
+===============================================================================
+
+1. Bind one port to igb_uio, then launch vhost by below command::
+
+ rm -rf vhost-net*
+ ./testpmd -l 3-4 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+2. Launch virtio-user by below command::
+
+ ./testpmd -l 7-9 -n 4 --socket-mem 1024,1024 --legacy-mem --file-prefix=virtio \
+ --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net,queues=1,packed_vq=1,mrg_rxbuf=1,in_order=0 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --txd=1024 --rxd=1024
+ >set fwd io
+ >start
+
+3. Send packet with packet generator with different packet size,includes [64, 1518], check the throughput can get expected data with below command::
+
+ testpmd>show port stats all
+
+Test Case 4: pvp test with split ring mergeable path
+====================================================
+
+1. Bind one port to igb_uio, then launch vhost by below command::
+
+ rm -rf vhost-net*
+ ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
+ --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' \
+ -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+2. Launch virtio-user by below command::
+
+ ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
+ --legacy-mem --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,in_order=0,mrg_rxbuf=1 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --nb-cores=1 --txd=1024 --rxd=1024
+ >set fwd mac
+ >start
+
+3. Send packet with packet generator with different packet size,includes [64, 1518], check the throughput can get expected data with below command::
+
+ testpmd>show port stats all
+
+Test Case 5: virtio single core performance test with split ring mergeable path
+===============================================================================
+
+1. Bind one port to igb_uio, then launch vhost by below command::
+
+ rm -rf vhost-net*
+ ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
+ --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=2 --txd=1024 --rxd=1024
+ testpmd>set fwd io
+ testpmd>start
+
+2. Launch virtio-user by below command::
+
+ ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
+ --legacy-mem --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,in_order=0,mrg_rxbuf=1 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
+ >set fwd mac
+ >start
+
+3. Send packet with packet generator with different packet size,includes [64, 1518], check the throughput can get expected data with below command::
+
+ testpmd>show port stats all
+
+Test Case 6: vhost single core performance test with split ring mergeable path
+==============================================================================
+
+1. Bind one port to igb_uio, then launch vhost by below command::
+
+ rm -rf vhost-net*
+ ./testpmd -l 3-4 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+2. Launch virtio-user by below command::
+
+ ./testpmd -l 7-9 -n 4 --socket-mem 1024,1024 --legacy-mem --file-prefix=virtio \
+ --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net,queues=1,in_order=0,mrg_rxbuf=1 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --txd=1024 --rxd=1024
+ >set fwd io
+ >start
+
+3. Send packet with packet generator with different packet size,includes [64, 1518], check the throughput can get expected data with below command::
+
+ testpmd>show port stats all
\ No newline at end of file
--
2.17.1
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [dts] [PATCH v1] test_plans: add virtio ci test for performance track
2020-01-12 20:29 [dts] [PATCH v1] test_plans: add virtio ci test for performance track Yinan
@ 2020-01-13 7:52 ` Tu, Lijuan
0 siblings, 0 replies; 2+ messages in thread
From: Tu, Lijuan @ 2020-01-13 7:52 UTC (permalink / raw)
To: Wang, Yinan, dts; +Cc: Wang, Yinan
applied
> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of Yinan
> Sent: Monday, January 13, 2020 4:30 AM
> To: dts@dpdk.org
> Cc: Wang, Yinan <yinan.wang@intel.com>
> Subject: [dts] [PATCH v1] test_plans: add virtio ci test for performance track
>
> From: Wang Yinan <yinan.wang@intel.com>
>
> add vhost/virtio pvp and loopback basic test for performance track in CI
>
> Signed-off-by: Wang Yinan <yinan.wang@intel.com>
> ---
> test_plans/perf_virtio_user_loopback.rst | 292 +++++++++++++++++++++++
> test_plans/perf_virtio_user_pvp.rst | 191 +++++++++++++++
> 2 files changed, 483 insertions(+)
> create mode 100644 test_plans/perf_virtio_user_loopback.rst
> create mode 100644 test_plans/perf_virtio_user_pvp.rst
>
> diff --git a/test_plans/perf_virtio_user_loopback.rst
> b/test_plans/perf_virtio_user_loopback.rst
> new file mode 100644
> index 0000000..62ca31a
> --- /dev/null
> +++ b/test_plans/perf_virtio_user_loopback.rst
> @@ -0,0 +1,292 @@
> +.. Copyright (c) <2019>, Intel Corporation
> + All rights reserved.
> +
> + Redistribution and use in source and binary forms, with or without
> + modification, are permitted provided that the following conditions
> + are met:
> +
> + - Redistributions of source code must retain the above copyright
> + notice, this list of conditions and the following disclaimer.
> +
> + - Redistributions in binary form must reproduce the above copyright
> + notice, this list of conditions and the following disclaimer in
> + the documentation and/or other materials provided with the
> + distribution.
> +
> + - Neither the name of Intel Corporation nor the names of its
> + contributors may be used to endorse or promote products derived
> + from this software without specific prior written permission.
> +
> + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS
> + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> FITNESS
> + FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> + COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
> INDIRECT,
> + INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> + (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
> GOODS OR
> + SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
> + HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
> CONTRACT,
> + STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
> + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
> ADVISED
> + OF THE POSSIBILITY OF SUCH DAMAGE.
> +
> +===========================================
> +vhost/virtio multi-paths loopback test plan
> +===========================================
> +
> +Benchmark vhost/virtio-user loopback test with 9 tx/rx paths.
> +Includes split ring mergeable, non-mergeable, vector_rx, inorder
> +mergeable, inorder non-mergeable, packed ring mergeable, packed ring
> +non-mergeable，
> +packed ring inorder mergeable, packed ring inorder non-mergeable path.
> +
> +Test Case 1: loopback test with packed ring mergeable path
> +==========================================================
> +
> +1. Launch vhost by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem --no-pci \
> + --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -
> - -i --nb-cores=1 --txd=1024 --rxd=1024
> + testpmd>set fwd mac
> +
> +2. Launch virtio-user by below command::
> +
> + ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
> + --legacy-mem --no-pci --file-prefix=virtio \
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,packed_vq=1,mrg_rxbuf=1,in_order=0 \
> + -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --
> txd=1024 --rxd=1024
> + >set fwd mac
> + >start
> +
> +3. Send packets with vhost-testpmd,[frame_size] is the parameter changs in
> [64, 1518]::
> +
> + testpmd>set txpkts [frame_size]
> + testpmd>start tx_first 32
> +
> +4. Repeat below command to get throughput 10 times,then check the
> average throughput can get expected data with below command::
> +
> + testpmd>show port stats all
> +
> +Test Case 2: loopback test with packed ring non-mergeable path
> +==============================================================
> +
> +1. Launch vhost by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem --no-pci \
> + --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -
> - -i --nb-cores=1 --txd=1024 --rxd=1024
> + testpmd>set fwd mac
> +
> +2. Launch virtio-user by below command::
> +
> + ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
> + --legacy-mem --no-pci --file-prefix=virtio \
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,packed_vq=1,mrg_rxbuf=0,in_order=0 \
> + -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --
> txd=1024 --rxd=1024
> + >set fwd mac
> + >start
> +
> +3. Send packets with vhost-testpmd, [frame_size] is the parameter changs
> in [64, 1518]::
> +
> + testpmd>set txpkts [frame_size]
> + testpmd>start tx_first 32
> +
> +4. Repeat below command to get throughput 10 times,then check the
> average throughput can get expected data with below command::
> +
> + testpmd>show port stats all
> +
> +Test Case 3: loopback test with packed ring inorder mergeable path
> +===============================================================
> ====
> +
> +1. Launch vhost by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem --no-pci \
> + --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -
> - -i --nb-cores=1 --txd=1024 --rxd=1024
> + testpmd>set fwd mac
> +
> +2. Launch virtio-user by below command::
> +
> + ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
> + --legacy-mem --no-pci --file-prefix=virtio \
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,packed_vq=1,in_order=1,mrg_rxbuf=1 \
> + -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --
> txd=1024 --rxd=1024
> + >set fwd mac
> + >start
> +
> +3. Send packets with vhost-testpmd,[frame_size] is the parameter changs in
> [64, 1518]::
> +
> + testpmd>set txpkts [frame_size]
> + testpmd>start tx_first 32
> +
> +4. Repeat below command to get throughput 10 times,then check the
> average throughput can get expected data with below command::
> +
> + testpmd>show port stats all
> +
> +Test Case 4: loopback test with packed ring inorder non-mergeable path
> +===============================================================
> =======
> +
> +1. Launch vhost by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem --no-pci \
> + --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -
> - -i --nb-cores=1 --txd=1024 --rxd=1024
> + testpmd>set fwd mac
> +
> +2. Launch virtio-user by below command::
> +
> + ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
> + --legacy-mem --no-pci --file-prefix=virtio \
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,packed_vq=1,in_order=1,mrg_rxbuf=0 \
> + -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --
> txd=1024 --rxd=1024
> + >set fwd mac
> + >start
> +
> +3. Send packets with vhost-testpmd,[frame_size] is the parameter changs in
> [64, 1518]::
> +
> + testpmd>set txpkts [frame_size]
> + testpmd>start tx_first 32
> +
> +4. Repeat below command to get throughput 10 times,then check the
> average throughput can get expected data with below command::
> +
> + testpmd>show port stats all
> +
> +Test Case 5: loopback test with split ring mergeable path
> +==========================================================
> +
> +1. Launch vhost by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem --no-pci \
> + --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -
> - -i --nb-cores=1 --txd=1024 --rxd=1024
> + testpmd>set fwd mac
> +
> +2. Launch virtio-user by below command::
> +
> + ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
> + --legacy-mem --no-pci --file-prefix=virtio \
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,in_order=0,mrg_rxbuf=1 \
> + -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --
> txd=1024 --rxd=1024
> + >set fwd mac
> + >start
> +
> +3. Send packets with vhost-testpmd,[frame_size] is the parameter changs in
> [64, 1518]::
> +
> + testpmd>set txpkts [frame_size]
> + testpmd>start tx_first 32
> +
> +4. Repeat below command to get throughput 10 times,then check the
> average throughput can get expected data with below command::
> +
> + testpmd>show port stats all
> +
> +Test Case 6: loopback test with split ring non-mergeable path
> +=============================================================
> +
> +1. Launch vhost by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem --no-pci \
> + --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -
> - -i --nb-cores=1 --txd=1024 --rxd=1024
> + testpmd>set fwd mac
> +
> +2. Launch virtio-user by below command::
> +
> + ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
> + --legacy-mem --no-pci --file-prefix=virtio \
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,in_order=0,mrg_rxbuf=0 \
> + -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --
> txd=1024 --rxd=1024
> + >set fwd mac
> + >start
> +
> +3. Send packets with vhost-testpmd,[frame_size] is the parameter changs in
> [64, 1518]::
> +
> + testpmd>set txpkts [frame_size]
> + testpmd>start tx_first 32
> +
> +4. Repeat below command to get throughput 10 times,then check the
> average throughput can get expected data with below command::
> +
> + testpmd>show port stats all
> +
> +Test Case 7: loopback test with split ring vector_rx path
> +=========================================================
> +
> +1. Launch vhost by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem --no-pci \
> + --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -
> - -i --nb-cores=1 --txd=1024 --rxd=1024
> + testpmd>set fwd mac
> +
> +2. Launch virtio-user by below command::
> +
> + ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
> + --legacy-mem --no-pci --file-prefix=virtio \
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,in_order=0,mrg_rxbuf=0 \
> + -- -i --nb-cores=1 --txd=1024 --rxd=1024
> + >set fwd mac
> + >start
> +
> +3. Send packets with vhost-testpmd,[frame_size] is the parameter changs in
> [64, 1518]::
> +
> + testpmd>set txpkts [frame_size]
> + testpmd>start tx_first 32
> +
> +4. Repeat below command to get throughput 10 times,then check the
> average throughput can get expected data with below command::
> +
> + testpmd>show port stats all
> +
> +Test Case 8: loopback test with split ring inorder mergeable path
> +===============================================================
> ==
> +
> +1. Launch vhost by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem --no-pci \
> + --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -
> - -i --nb-cores=1 --txd=1024 --rxd=1024
> + testpmd>set fwd mac
> +
> +2. Launch virtio-user by below command::
> +
> + ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
> + --legacy-mem --no-pci --file-prefix=virtio \
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,in_order=1,mrg_rxbuf=1 \
> + -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --
> txd=1024 --rxd=1024
> + >set fwd mac
> + >start
> +
> +3. Send packets with vhost-testpmd,[frame_size] is the parameter changs in
> [64, 1518]::
> +
> + testpmd>set txpkts [frame_size]
> + testpmd>start tx_first 32
> +
> +4. Repeat below command to get throughput 10 times,then check the
> average throughput can get expected data with below command::
> +
> + testpmd>show port stats all
> +
> +Test Case 9: loopback test with split ring inorder non-mergeable path
> +===============================================================
> ======
> +
> +1. Launch vhost by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem --no-pci \
> + --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -
> - -i --nb-cores=1 --txd=1024 --rxd=1024
> + testpmd>set fwd mac
> +
> +2. Launch virtio-user by below command::
> +
> + ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
> + --legacy-mem --no-pci --file-prefix=virtio \
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,in_order=1,mrg_rxbuf=0 \
> + -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --
> txd=1024 --rxd=1024
> + >set fwd mac
> + >start
> +
> +3. Send packets with vhost-testpmd,[frame_size] is the parameter changs in
> [64, 1518]::
> +
> + testpmd>set txpkts [frame_size]
> + testpmd>start tx_first 32
> +
> +4. Repeat below command to get throughput 10 times,then check the
> average throughput can get expected data with below command::
> +
> + testpmd>show port stats all
> \ No newline at end of file
> diff --git a/test_plans/perf_virtio_user_pvp.rst
> b/test_plans/perf_virtio_user_pvp.rst
> new file mode 100644
> index 0000000..11c1550
> --- /dev/null
> +++ b/test_plans/perf_virtio_user_pvp.rst
> @@ -0,0 +1,191 @@
> +.. Copyright (c) <2019>, Intel Corporation
> + All rights reserved.
> +
> + Redistribution and use in source and binary forms, with or without
> + modification, are permitted provided that the following conditions
> + are met:
> +
> + - Redistributions of source code must retain the above copyright
> + notice, this list of conditions and the following disclaimer.
> +
> + - Redistributions in binary form must reproduce the above copyright
> + notice, this list of conditions and the following disclaimer in
> + the documentation and/or other materials provided with the
> + distribution.
> +
> + - Neither the name of Intel Corporation nor the names of its
> + contributors may be used to endorse or promote products derived
> + from this software without specific prior written permission.
> +
> + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS
> + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> FITNESS
> + FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> + COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
> INDIRECT,
> + INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> + (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
> GOODS OR
> + SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
> + HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
> CONTRACT,
> + STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
> + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
> ADVISED
> + OF THE POSSIBILITY OF SUCH DAMAGE.
> +
> +======================================
> +vhost/virtio pvp performance test plan
> +======================================
> +
> +Benchmark PVP performance with split ring mergeable path and packed ring
> mergeable path.
> +For basic pvp test，give 1 core for vhost and virtio respectively.
> +For virtio single core performance test，give 2 cores for vhost and 1
> +core for virtio, set io fwd at vhost side to lower the vhost workload.
> +For vhost single core performance test，give 2 cores for virtio and 1
> +core for vhost, set io fwd at virtio side to lower the virtio workload.
> +
> +Test flow
> +=========
> +
> +TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
> +
> +Test Case 1: pvp test with packed ring mergeable path
> +=====================================================
> +
> +1. Bind one port to igb_uio, then launch vhost by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -n 4 -l 2-3 --socket-mem 1024,1024 --legacy-mem \
> + --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0'
> \
> + -- -i --nb-cores=1 --txd=1024 --rxd=1024
> + testpmd>set fwd mac
> + testpmd>start
> +
> +2. Launch virtio-user by below command::
> +
> + ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
> + --legacy-mem --no-pci --file-prefix=virtio \
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,packed_vq=1,mrg_rxbuf=1,in_order=0 \
> + -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --nb-cores=1 --txd=1024 --
> rxd=1024
> + >set fwd mac
> + >start
> +
> +3. Send packet with packet generator with different packet size,includes [64,
> 1518], check the throughput can get expected data with below command::
> +
> + testpmd>show port stats all
> +
> +Test Case 2: virtio single core performance test with packed ring
> +mergeable path
> +===============================================================
> ========
> +==========
> +
> +1. Bind one port to igb_uio, then launch vhost by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
> + --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -
> - -i --nb-cores=2 --txd=1024 --rxd=1024
> + testpmd>set fwd io
> + testpmd>start
> +
> +2. Launch virtio-user by below command::
> +
> + ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
> + --legacy-mem --no-pci --file-prefix=virtio \
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,packed_vq=1,mrg_rxbuf=1,in_order=0 \
> + -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --
> txd=1024 --rxd=1024
> + >set fwd mac
> + >start
> +
> +3. Send packet with packet generator with different packet size,includes [64,
> 1518], check the throughput can get expected data with below command::
> +
> + testpmd>show port stats all
> +
> +Test Case 3: vhost single core performance test with packed ring
> +mergeable path
> +===============================================================
> ========
> +========
> +
> +1. Bind one port to igb_uio, then launch vhost by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -l 3-4 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=vhost \
> + --vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i --nb-cores=1 --
> txd=1024 --rxd=1024
> + testpmd>set fwd mac
> + testpmd>start
> +
> +2. Launch virtio-user by below command::
> +
> + ./testpmd -l 7-9 -n 4 --socket-mem 1024,1024 --legacy-mem --file-
> prefix=virtio \
> + --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-
> net,queues=1,packed_vq=1,mrg_rxbuf=1,in_order=0 \
> + -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --
> txd=1024 --rxd=1024
> + >set fwd io
> + >start
> +
> +3. Send packet with packet generator with different packet size,includes [64,
> 1518], check the throughput can get expected data with below command::
> +
> + testpmd>show port stats all
> +
> +Test Case 4: pvp test with split ring mergeable path
> +====================================================
> +
> +1. Bind one port to igb_uio, then launch vhost by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
> + --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0'
> \
> + -- -i --nb-cores=1 --txd=1024 --rxd=1024
> + testpmd>set fwd mac
> + testpmd>start
> +
> +2. Launch virtio-user by below command::
> +
> + ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
> + --legacy-mem --no-pci --file-prefix=virtio \
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,in_order=0,mrg_rxbuf=1 \
> + -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --nb-cores=1 --txd=1024 --
> rxd=1024
> + >set fwd mac
> + >start
> +
> +3. Send packet with packet generator with different packet size,includes [64,
> 1518], check the throughput can get expected data with below command::
> +
> + testpmd>show port stats all
> +
> +Test Case 5: virtio single core performance test with split ring
> +mergeable path
> +===============================================================
> ========
> +========
> +
> +1. Bind one port to igb_uio, then launch vhost by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
> + --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -
> - -i --nb-cores=2 --txd=1024 --rxd=1024
> + testpmd>set fwd io
> + testpmd>start
> +
> +2. Launch virtio-user by below command::
> +
> + ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
> + --legacy-mem --no-pci --file-prefix=virtio \
> + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-
> net,in_order=0,mrg_rxbuf=1 \
> + -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --
> txd=1024 --rxd=1024
> + >set fwd mac
> + >start
> +
> +3. Send packet with packet generator with different packet size,includes [64,
> 1518], check the throughput can get expected data with below command::
> +
> + testpmd>show port stats all
> +
> +Test Case 6: vhost single core performance test with split ring
> +mergeable path
> +===============================================================
> ========
> +=======
> +
> +1. Bind one port to igb_uio, then launch vhost by below command::
> +
> + rm -rf vhost-net*
> + ./testpmd -l 3-4 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=vhost \
> + --vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i --nb-cores=1 --
> txd=1024 --rxd=1024
> + testpmd>set fwd mac
> + testpmd>start
> +
> +2. Launch virtio-user by below command::
> +
> + ./testpmd -l 7-9 -n 4 --socket-mem 1024,1024 --legacy-mem --file-
> prefix=virtio \
> + --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-
> net,queues=1,in_order=0,mrg_rxbuf=1 \
> + -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --
> txd=1024 --rxd=1024
> + >set fwd io
> + >start
> +
> +3. Send packet with packet generator with different packet size,includes [64,
> 1518], check the throughput can get expected data with below command::
> +
> + testpmd>show port stats all
> \ No newline at end of file
> --
> 2.17.1
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2020-01-13 7:52 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-01-12 20:29 [dts] [PATCH v1] test_plans: add virtio ci test for performance track Yinan
2020-01-13 7:52 ` Tu, Lijuan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).