From: yufengmx <yufengx.mo@intel.com>
To: dts@dpdk.org, lijuan.tu@intel.com
Cc: yufengmx <yufengx.mo@intel.com>
Subject: [dts] [PATCH V3 0/13] tests/l3fwd_lpm_ipv4: upload automation script
Date: Thu, 16 Jan 2020 13:28:17 +0800 [thread overview]
Message-ID: <20200116052820.21902-11-yufengx.mo@intel.com> (raw)
In-Reply-To: <20200116052820.21902-1-yufengx.mo@intel.com>
upload l3fwd_lpm_ipv4 suite automation script.
Signed-off-by: yufengmx <yufengx.mo@intel.com>
---
tests/TestSuite_l3fwd_lpm_ipv4.py | 86 +++++++++++++++++++++++++++++++
1 file changed, 86 insertions(+)
create mode 100644 tests/TestSuite_l3fwd_lpm_ipv4.py
diff --git a/tests/TestSuite_l3fwd_lpm_ipv4.py b/tests/TestSuite_l3fwd_lpm_ipv4.py
new file mode 100644
index 0000000..dc6c0fd
--- /dev/null
+++ b/tests/TestSuite_l3fwd_lpm_ipv4.py
@@ -0,0 +1,86 @@
+# BSD LICENSE
+#
+# Copyright(c) 2010-2020 Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+"""
+DPDK Test suite.
+Layer-3 forwarding test script.
+"""
+from test_case import TestCase
+from l3fwd_base import L3fwdBase, LPM, EM, L3_IPV6, L3_IPV4
+
+
+class TestL3fwdLpmIpv4(TestCase, L3fwdBase):
+
+ #
+ # Test cases.
+ #
+ def set_up_all(self):
+ """
+ Run at the start of each test suite.
+ L3fwd Prerequisites
+ """
+ # Based on h/w type, choose how many ports to use
+ self.dut_ports = self.dut.get_ports(self.nic)
+ valports = [
+ _ for _ in self.dut_ports if self.tester.get_local_port(_) != -1]
+ self.logger.debug(valports)
+ self.verify_ports_number(valports)
+ # get socket and cores
+ socket = self.dut.get_numa_id(self.dut_ports[0])
+ cores = self.dut.get_core_list("1S/8C/1T", socket=socket)
+ self.verify(cores is not None, "Insufficient cores for speed testing")
+ # init l3fwd common base class parameters
+ self.l3fwd_init(valports, socket)
+ # preset testing environment
+ self.l3fwd_preset_test_environment(self.get_suite_cfg())
+
+ def tear_down_all(self):
+ """
+ Run after each test suite.
+ """
+ pass
+
+ def set_up(self):
+ """
+ Run before each test case.
+ """
+ pass
+
+ def tear_down(self):
+ """
+ Run after each test case.
+ """
+ self.dut.kill_all()
+ self.l3fwd_reset_cur_case()
+
+ def test_perf_throughput_ipv4_lpm(self):
+ self.l3fwd_set_cur_case('test_perf_throughput_ipv4_lpm')
+ self.ms_throughput(l3_proto=L3_IPV4, mode=LPM)
--
2.21.0
next prev parent reply other threads:[~2020-01-16 5:26 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-16 5:28 [dts] [PATCH V3 0/13] l3fwd: refactor script yufengmx
2020-01-16 5:28 ` [dts] [PATCH V3 1/13] conf/l3fwd: l3fwd suite testing configuration yufengmx
2020-01-16 5:28 ` [dts] [PATCH V3 2/13] conf/l3fwd_base: l3fwd base class flows configuration yufengmx
2020-01-16 5:28 ` [dts] [PATCH V3 3/13] conf/l3fwd_em: suite testing configuration yufengmx
2020-01-16 5:28 ` [dts] [PATCH V3 4/13] conf/l3fwd_lpm_ipv4_rfc2544: " yufengmx
2020-01-16 5:28 ` [dts] [PATCH V3 5/13] conf/l3fwd_lpm_ipv4: l3fwd_lpm_ipv4 " yufengmx
2020-01-16 5:28 ` [dts] [PATCH V3 6/13] conf/l3fwd_lpm_ipv6: suite " yufengmx
2020-01-16 5:28 ` [dts] [PATCH V3 7/13] tests/l3fwd: upload automation script yufengmx
2020-01-16 5:28 ` [dts] [PATCH V3 8/13] tests/l3fwd_em: " yufengmx
2020-01-16 5:28 ` [dts] [PATCH V3 9/13] tests/l3fwd_lpm_ipv4_rfc2544: " yufengmx
2020-01-16 5:28 ` yufengmx [this message]
2020-01-16 5:28 ` [dts] [PATCH V3 1/13] tests/l3fwd_lpm_ipv6: " yufengmx
2020-01-16 5:28 ` [dts] [PATCH V3 2/13] tests/l3fwd_base: " yufengmx
2020-01-16 5:28 ` [dts] [PATCH V3 3/13] framework/test_case: add wirespeed columbiaville nic yufengmx
2020-01-16 7:15 ` [dts] [PATCH V3 0/13] l3fwd: refactor script Tu, Lijuan
2020-01-16 7:27 yufengmx
2020-01-16 7:27 ` [dts] [PATCH V3 0/13] tests/l3fwd_lpm_ipv4: upload automation script yufengmx
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200116052820.21902-11-yufengx.mo@intel.com \
--to=yufengx.mo@intel.com \
--cc=dts@dpdk.org \
--cc=lijuan.tu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).