test suite reviews and discussions
 help / color / mirror / Atom feed
* [dts] [PATCH v1] test_plans: move cases to pvp_vhost_user_reconnect_test_plan.rst
@ 2020-02-21  3:21 Yinan
  2020-02-22 12:18 ` Tu, Lijuan
  0 siblings, 1 reply; 2+ messages in thread
From: Yinan @ 2020-02-21  3:21 UTC (permalink / raw)
  To: dts; +Cc: Wang Yinan

From: Wang Yinan <yinan.wang@intel.com>

Signed-off-by: Wang Yinan <yinan.wang@intel.com>
---
 ...ed_ring_vhost_user_reconnect_test_plan.rst | 387 ------------------
 1 file changed, 387 deletions(-)
 delete mode 100644 test_plans/pvp_packed_ring_vhost_user_reconnect_test_plan.rst

diff --git a/test_plans/pvp_packed_ring_vhost_user_reconnect_test_plan.rst b/test_plans/pvp_packed_ring_vhost_user_reconnect_test_plan.rst
deleted file mode 100644
index eca8abe..0000000
--- a/test_plans/pvp_packed_ring_vhost_user_reconnect_test_plan.rst
+++ /dev/null
@@ -1,387 +0,0 @@
-.. Copyright (c) <2019>, Intel Corporation
-   All rights reserved.
-
-   Redistribution and use in source and binary forms, with or without
-   modification, are permitted provided that the following conditions
-   are met:
-
-   - Redistributions of source code must retain the above copyright
-     notice, this list of conditions and the following disclaimer.
-
-   - Redistributions in binary form must reproduce the above copyright
-     notice, this list of conditions and the following disclaimer in
-     the documentation and/or other materials provided with the
-     distribution.
-
-   - Neither the name of Intel Corporation nor the names of its
-     contributors may be used to endorse or promote products derived
-     from this software without specific prior written permission.
-
-   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-   FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-   COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-   INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-   SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-   STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
-   OF THE POSSIBILITY OF SUCH DAMAGE.
-
-===================================
-Packed ring pvp reconnect test plan
-===================================
-
-Description
-===========
-
-Vhost-user uses Unix domain sockets for passing messages. This means the DPDK vhost-user implementation has two options:
-
-* DPDK vhost-user acts as the server:
-  DPDK will create a Unix domain socket server file and listen for connections from the frontend.
-  Note, this is the default mode, and the only mode before DPDK v16.07.
-
-* DPDK vhost-user acts as the client:
-  Unlike the server mode, this mode doesn't create the socket file;it just tries to connect to the server (which responses to create the file instead).
-  When the DPDK vhost-user application restarts, DPDK vhost-user will try to connect to the server again. This is how the "reconnect" feature works.
-  When DPDK vhost-user restarts from an normal or abnormal exit (such as a crash), the client mode allows DPDK to establish the connection again. Note
-  that QEMU version v4.2.0 or above is required for this reconnect feature.
-  Also, when DPDK vhost-user acts as the client, it will keep trying to reconnect to the server (QEMU) until it succeeds. This is useful in two cases:
-
-    * When QEMU is not started yet.
-    * When QEMU restarts (for example due to a guest OS reboot).
-
-Test Case1: vhost-user/virtio-pmd pvp reconnect from vhost-user
-===============================================================
-Flow: TG--> NIC --> Vhost --> Virtio --> Vhost--> NIC--> TG
-
-1. Bind one port to igb_uio, then launch vhost with client mode by below commands::
-
-    ./testpmd -c 0x30 -n 4 --socket-mem 1024,1024 --legacy-mem --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=1' -- -i --nb-cores=1
-    testpmd>set fwd mac
-    testpmd>start
-
-2. Start VM with 1 virtio device, and set the qemu as server mode::
-
-    qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 2 -m 4096 \
-    -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-    -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img  \
-    -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-    -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
-    -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f \
-    -net user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
-    -chardev socket,id=char0,path=./vhost-net,server \
-    -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-    -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,rx_queue_size=1024,tx_queue_size=1024,packed=on \
-    -vnc :10
-
-3. On VM, bind virtio net to igb_uio and run testpmd::
-
-    ./testpmd -c 0x3 -n 4 -- -i --nb-cores=1 --txd=1024 --rxd=1024
-    testpmd>set fwd mac
-    testpmd>start
-
-4. Send packets by packet generator, check if packets can be RX/TX with virtio-pmd::
-
-    testpmd>show port stats all
-
-5. On host, quit vhost-user, then re-launch the vhost-user with below command::
-
-    testpmd>quit
-    ./testpmd -c 0x30 -n 4 --socket-mem 1024,1024 --legacy-mem --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=1' -- -i --nb-cores=1
-    testpmd>set fwd mac
-    testpmd>start
-
-6. Check if the reconnection can work, still send packets by packet generator, check if packets can be RX/TX with virtio-pmd::
-
-    testpmd>show port stats all
-
-Test Case2: vhost-user/virtio-pmd pvp reconnect from VM
-=======================================================
-Flow: TG--> NIC --> Vhost --> Virtio --> Vhost--> NIC--> TG
-
-1. Bind one port to igb_uio, then launch vhost with client mode by below commands::
-
-    ./testpmd -c 0x30 -n 4 --socket-mem 1024,1024 --legacy-mem --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=1' -- -i --nb-cores=1
-    testpmd>set fwd mac
-    testpmd>start
-
-2. Start VM with 1 virtio device, and set the qemu as server mode::
-
-    qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 2 -m 4096 \
-    -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-    -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img  \
-    -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-    -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
-    -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f \
-    -net user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
-    -chardev socket,id=char0,path=./vhost-net,server \
-    -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-    -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,rx_queue_size=1024,tx_queue_size=1024,packed=on \
-    -vnc :10
-
-3. On VM, bind virtio net to igb_uio and run testpmd::
-
-    ./testpmd -c 0x3 -n 4 -- -i --nb-cores=1 --txd=1024 --rxd=1024
-    testpmd>set fwd mac
-    testpmd>start
-
-4. Send packets by packet generator, check if packets can be RX/TX with virtio-pmd::
-
-    testpmd>show port stats all
-
-5. Reboot the VM, rerun step2-step4, check the reconnection can be established.
-
-Test Case3: vhost-user/virtio-pmd pvp reconnect stability test
-==============================================================
-Flow: TG--> NIC --> Vhost --> Virtio --> Vhost--> NIC--> TG
-
-Similar as Test Case1, all steps are similar except step 5, 6.
-
-5. Quit vhost-user, then re-launch, repeat it 5-8 times, check if the reconnect can work and ensure the traffic can continue.
-
-6. Reboot VM, then re-launch VM, repeat it 3-5 times, check if the reconnect can work and ensure the traffic can continue.
-
-Test Case 4: vhost-user/virtio-pmd pvp with multi VMs reconnect from vhost-user
-===============================================================================
-
-1. Bind one port to igb_uio, launch the vhost by below command::
-
-    ./testpmd -c 0x30 -n 4 --socket-mem 2048,2048 --legacy-mem --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,client=1,queues=1' --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=1'  -- -i --port-topology=chained --nb-cores=1 --txd=1024 --rxd=1024
-    testpmd>set fwd mac
-    testpmd>start
-
-2. Launch VM1 and VM2::
-
-    qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 12 -m 4096 \
-    -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-    -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img  \
-    -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-    -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
-    -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f \
-    -net user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
-    -chardev socket,id=char0,path=./vhost-net,server \
-    -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-    -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,rx_queue_size=1024,tx_queue_size=1024,packed=on \
-    -vnc :10
-
-    qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 12 -m 4096 \
-    -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-    -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16-1.img  \
-    -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-    -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
-    -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f \
-    -net user,vlan=2,hostfwd=tcp:127.0.0.1:6003-:22 \
-    -chardev socket,id=char0,path=./vhost-net1,server \
-    -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-    -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,mrg_rxbuf=on,rx_queue_size=1024,tx_queue_size=1024,packed=on \
-    -vnc :11
-
-3. On VM1, bind virtio1 to igb_uio and run testpmd::
-
-    ./testpmd -c 0x3 -n 4 -- -i --port-topology=chained --nb-cores=1 --txd=1024 --rxd=1024
-    testpmd>set fwd mac
-    testpmd>start
-
-4. On VM2, bind virtio2 to igb_uio and run testpmd::
-
-    ./testpmd -c 0x3 -n 4 -- -i --port-topology=chained --nb-cores=1 --txd=1024 --rxd=1024
-    testpmd>set fwd mac
-    testpmd>start
-
-5. Send packets by packet generator, check if packets can be RX/TX with two virtio-pmds in two VMs::
-
-    testpmd>show port stats all
-
-6. On host, quit vhost-user, then re-launch the vhost-user with below command::
-
-    testpmd>quit
-    ./testpmd -c 0x30 -n 4 --socket-mem 2048,2048 --legacy-mem --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,client=1,queues=1' --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=1'  -- -i --port-topology=chained --nb-cores=1 --txd=1024 --rxd=1024
-    testpmd>set fwd mac
-    testpmd>start
-
-7. Check if the reconnection can work, still send packets by packet generator, check if packets can be RX/TX with two virtio-pmds in two VMs::
-
-    testpmd>show port stats all
-
-Test Case 5: vhost-user/virtio-pmd pvp with multi VMs reconnect from VMs
-========================================================================
-
-1. Bind one port to igb_uio, launch the vhost by below command::
-
-    ./testpmd -c 0x30 -n 4 --socket-mem 2048,2048 --legacy-mem --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,client=1,queues=1' --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=1'  -- -i --port-topology=chained --nb-cores=1 --txd=1024 --rxd=1024
-    testpmd>set fwd mac
-    testpmd>start
-
-2. Launch VM1 and VM2::
-
-    qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 2 -m 4096 \
-    -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-    -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img  \
-    -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-    -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
-    -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f \
-    -net user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
-    -chardev socket,id=char0,path=./vhost-net,server \
-    -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-    -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,rx_queue_size=1024,tx_queue_size=1024,packed=on \
-    -vnc :10
-
-    qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 2 -m 4096 \
-    -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-    -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16-1.img  \
-    -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-    -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
-    -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f \
-    -net user,vlan=2,hostfwd=tcp:127.0.0.1:6003-:22 \
-    -chardev socket,id=char0,path=./vhost-net1,server \
-    -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-    -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,rx_queue_size=1024,tx_queue_size=1024,packed=on \
-    -vnc :11
-
-3. On VM1, bind virtio1 to igb_uio and run testpmd::
-
-    ./testpmd -c 0x3 -n 4 -- -i --port-topology=chained --nb-cores=1 --txd=1024 --rxd=1024
-    testpmd>set fwd mac
-    testpmd>start
-
-4. On VM2, bind virtio2 to igb_uio and run testpmd::
-
-    ./testpmd -c 0x3 -n 4 -- -i --port-topology=chained --port-topology=chain --nb-cores=1 --txd=1024 --rxd=1024
-    testpmd>set fwd mac
-    testpmd>start
-
-5. Send packets by packet generator, check if packets can be RX/TX with two virtio-pmds in two VMs::
-
-    testpmd>show port stats all
-
-6. Reboot the two VMs, rerun step2-step5.
-
-7. Check if the reconnection can work, still send packets by packet generator, check if packets can be RX/TX with two virtio-pmds in two VMs::
-
-    testpmd>show port stats all
-
-Test Case 6: vhost-user/virtio-pmd pvp with multi VMs reconnect stability test
-==============================================================================
-
-Similar as Test Case 4, all steps are similar except step 6, 7.
-
-6. Quit vhost-user, then re-launch, repeat it 5-8 times, check if the reconnect can work and ensure the traffic can continue.
-
-7. Reboot VMs, then re-launch VMs, repeat it 3-5 times, check if the reconnect can work and ensure the traffic can continue.
-
-Test Case 7: vhost-user/virtio-net VM2VM reconnect from vhost-user
-==================================================================
-Flow: Virtio-net1 --> Vhost-user --> Virtio-net2
-
-1. Launch the vhost by below commands, enable the client mode and tso::
-
-    ./testpmd -c 0x30 -n 4 --socket-mem 2048,2048 --legacy-mem --no-pci --file-prefix=vhost --vdev 'net_vhost,iface=vhost-net,client=1,queues=1' --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=1'  -- -i --nb-cores=1 --txd=1024 --rxd=1024
-    testpmd>start
-
-3. Launch VM1 and VM2::
-
-    qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 2 -m 4096 \
-    -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-    -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img  \
-    -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-    -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
-    -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f \
-    -net user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
-    -chardev socket,id=char0,path=./vhost-net,server \
-    -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-    -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,rx_queue_size=1024,tx_queue_size=1024,packed=on \
-    -vnc :10
-
-    qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 2 -m 4096 \
-    -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-    -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16-1.img  \
-    -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-    -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
-    -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f \
-    -net user,vlan=2,hostfwd=tcp:127.0.0.1:6003-:22 \
-    -chardev socket,id=char0,path=./vhost-net1,server \
-    -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-    -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,mrg_rxbuf=on,rx_queue_size=1024,tx_queue_size=1024,packed=on \
-    -vnc :11
-
-4. Set virtio device IP and run arp protocal on two VMs::
-
-    VM1: ifconfig ens4 1.1.1.2
-    VM2: ifconfig ens4 1.1.1.3
-    VM1: arp -s 1.1.1.3 52:54:00:00:00:02
-    VM2: arp -s 1.1.1.2 52:54:00:00:00:01
-
-5. Run iperf on VM1 and VM2, check the tso enabled performance for 1 min::
-
-    VM1: iperf -s -i 1 -t 60
-    VM2: iperf -c 1.1.1.2 -t 60 -i 1
-
-6. Kill the vhost-user, then re-launch the vhost-user::
-
-    testpmd>quit
-    ./testpmd -c 0x30 -n 4 --socket-mem 2048,2048 --legacy-mem --no-pci --file-prefix=vhost --vdev 'net_vhost,iface=vhost-net,client=1,queues=1' --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=1'  -- -i --nb-cores=1 --txd=1024 --rxd=1024
-    testpmd>start
-
-7. Rerun step5, ensure the vhost-user can reconnect to VM again, and the iperf traffic can be continue.
-
-Test Case 8: vhost-user/virtio-net VM2VM reconnect from VMs
-===========================================================
-Flow: Virtio-net1 --> Vhost-user --> Virtio-net2
-
-1. Launch the vhost by below commands, enable the client mode and tso::
-
-    ./testpmd -c 0x30 -n 4 --socket-mem 2048,2048 --legacy-mem --no-pci --file-prefix=vhost --vdev 'net_vhost,iface=vhost-net,client=1,queues=1' --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=1'  -- -i --nb-cores=1 --txd=1024 --rxd=1024
-    testpmd>start
-
-3. Launch VM1 and VM2::
-
-    qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 2 -m 4096 \
-    -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-    -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img  \
-    -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-    -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
-    -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f \
-    -net user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
-    -chardev socket,id=char0,path=./vhost-net,server \
-    -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-    -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,rx_queue_size=1024,tx_queue_size=1024,packed=on \
-    -vnc :10
-
-    qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 2 -m 4096 \
-    -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-    -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16-1.img  \
-    -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-    -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
-    -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f \
-    -net user,vlan=2,hostfwd=tcp:127.0.0.1:6003-:22 \
-    -chardev socket,id=char0,path=./vhost-net1,server \
-    -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-    -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,mrg_rxbuf=on,rx_queue_size=1024,tx_queue_size=1024,packed=on \
-    -vnc :11
-
-4. Set virtio device IP and run arp protocal on two VMs::
-
-    VM1: ifconfig ens4 1.1.1.2
-    VM2: ifconfig ens4 1.1.1.3
-    VM1: arp -s 1.1.1.3 52:54:00:00:00:02
-    VM2: arp -s 1.1.1.2 52:54:00:00:00:01
-
-5. Run iperf on VM1 and VM2, check the tso enabled performance for 1 min::
-
-    VM1: iperf -s -i 1 -t 60
-    VM2: iperf -c 1.1.1.2 -t 60 -i 1
-
-6. Reboot VM1 and VM2, rerun step3-step5, ensure the vhost-user can reconnect to VM again, and the iperf traffic can be continue.
-
-Test Case 9: vhost-user/virtio-net VM2VM reconnect stability test
-=================================================================
-Flow: Virtio-net1 --> Vhost-user --> Virtio-net2
-
-Similar as Test Case 7, all steps are similar except step 6.
-
-6. Quit vhost-user, then re-launch, repeat it 5-8 times, check if the reconnect can work and ensure the traffic can continue.
-
-7. Reboot two VMs, then re-launch VMs, repeat it 3-5 times, check if the reconnect can work and ensure the traffic can continue.
\ No newline at end of file
-- 
2.17.1


^ permalink raw reply	[flat|nested] 2+ messages in thread
end of thread, other threads:[~2020-02-22 12:18 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-02-21  3:21 [dts] [PATCH v1] test_plans: move cases to pvp_vhost_user_reconnect_test_plan.rst Yinan
2020-02-22 12:18 ` Tu, Lijuan

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).