From: Yinan <yinan.wang@intel.com>
To: dts@dpdk.org
Cc: Wang Yinan <yinan.wang@intel.com>
Subject: [dts] [PATCH v1] test_plans: add packed ring loopback virtio_user server_mode cases
Date: Sun, 23 Feb 2020 19:54:26 +0000 [thread overview]
Message-ID: <20200223195426.65978-1-yinan.wang@intel.com> (raw)
From: Wang Yinan <yinan.wang@intel.com>
Signed-off-by: Wang Yinan <yinan.wang@intel.com>
---
...back_virtio_user_server_mode_test_plan.rst | 256 ++++++++++++++----
1 file changed, 200 insertions(+), 56 deletions(-)
diff --git a/test_plans/loopback_virtio_user_server_mode_test_plan.rst b/test_plans/loopback_virtio_user_server_mode_test_plan.rst
index 1dd17d1..ea9442b 100644
--- a/test_plans/loopback_virtio_user_server_mode_test_plan.rst
+++ b/test_plans/loopback_virtio_user_server_mode_test_plan.rst
@@ -36,32 +36,32 @@ vhost/virtio-user loopback server mode test plan
Virtio-user server mode is a feature to enable virtio-user as the server, vhost as the client, thus after vhost-user is killed then relaunched,
virtio-user can reconnect back to vhost-user again; at another hand, virtio-user also can reconnect back to vhost-user after virtio-user is killed.
-This feature test need cover different rx/tx paths with virtio 1.0 and virtio 1.1, includes virtio 1.0 mergeable, normal, vector_rx, inorder no-mergeable, inorder mergeable path and virtio 1.1 mergeable, normal path.
+This feature test need cover different rx/tx paths with virtio 1.0 and virtio 1.1, includes split ring mergeable, non-mergeable, inorder mergeable,
+inorder non-mergeable, vector_rx path and packed ring mergeable, non-mergeable, inorder non-mergeable, inorder mergeable path.
-Test Case 1: Basic test for virtio-user server mode, launch vhost first
-========================================================================
+Test Case 1: Basic test for packed ring server mode
+===================================================
-1. Launch vhost as client mode::
+1. Launch virtio-user as server mode::
- rm -rf vhost-net*
- ./testpmd -l 3-4 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \
- --vdev 'net_vhost0,iface=/tmp/sock0,client=1,queues=1' -- -i --rxq=1 --txq=1 --nb-cores=1
+ ./testpmd -l 1-2 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/tmp/sock0,server=1,queues=1,packed_vq=1 -- -i --rxq=1 --txq=1 --no-numa
>set fwd mac
>start
-2. Launch virtio-user as server mode::
+2. Launch vhost as client mode::
- ./testpmd -l 1-2 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/tmp/sock0,server=1,queues=1 -- -i --rxq=1 --txq=1 --no-numa
+ ./testpmd -l 3-4 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=/tmp/sock0,client=1,queues=1' -- -i --rxq=1 --txq=1 --nb-cores=1
>set fwd mac
>start tx_first 32
-3. Run below command to get throughput,verify the loopback throughput is not zero::git git l
+3. Run below command to get throughput,verify the loopback throughput is not zero::
testpmd>show port stats all
-Test Case 2: Basic test for virtio-user server mode, launch virtio-user first
-==============================================================================
+Test Case 2: Basic test for split ring server mode
+===================================================
1. Launch virtio-user as server mode::
@@ -81,7 +81,7 @@ Test Case 2: Basic test for virtio-user server mode, launch virtio-user first
testpmd>show port stats all
-Test Case 3: loopback reconnect test with virtio 1.1 mergeable path and server mode
+Test Case 3: loopback reconnect test with split ring mergeable path and server mode
===================================================================================
1. launch vhost as client mode with 2 queues::
@@ -95,7 +95,7 @@ Test Case 3: loopback reconnect test with virtio 1.1 mergeable path and server m
2. Launch virtio-user as server mode with 2 queues::
./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,packed_vq=1,mrg_rxbuf=1,in_order=0 \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,mrg_rxbuf=1,in_order=0 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
>start tx_first 32
@@ -130,7 +130,7 @@ Test Case 3: loopback reconnect test with virtio 1.1 mergeable path and server m
8. Relaunch virtio-user and send packets::
./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,packed_vq=1,mrg_rxbuf=1,in_order=0 \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,mrg_rxbuf=1,in_order=0 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
>start tx_first 32
@@ -153,8 +153,8 @@ Test Case 3: loopback reconnect test with virtio 1.1 mergeable path and server m
testpmd>stop
-Test Case 4: loopback reconnect test with virtio 1.1 normal path and server mode
-================================================================================
+Test Case 4: loopback reconnect test with split ring inorder mergeable path and server mode
+===========================================================================================
1. launch vhost as client mode with 2 queues::
@@ -167,7 +167,7 @@ Test Case 4: loopback reconnect test with virtio 1.1 normal path and server mode
2. Launch virtio-user as server mode with 2 queues::
./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=0 \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,mrg_rxbuf=1,in_order=1 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
>start tx_first 32
@@ -202,7 +202,7 @@ Test Case 4: loopback reconnect test with virtio 1.1 normal path and server mode
8. Relaunch virtio-user and send packets::
./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=0 \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,mrg_rxbuf=1,in_order=1\
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
>start tx_first 32
@@ -225,8 +225,8 @@ Test Case 4: loopback reconnect test with virtio 1.1 normal path and server mode
testpmd>stop
-Test Case 5: loopback reconnect test with virtio 1.0 mergeable path and server mode
-===================================================================================
+Test Case 5: loopback reconnect test with split ring inorder non-mergeable path and server mode
+===============================================================================================
1. launch vhost as client mode with 2 queues::
@@ -239,7 +239,7 @@ Test Case 5: loopback reconnect test with virtio 1.0 mergeable path and server m
2. Launch virtio-user as server mode with 2 queues::
./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,mrg_rxbuf=1,in_order=0 \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,mrg_rxbuf=0,in_order=1 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
>start tx_first 32
@@ -274,7 +274,7 @@ Test Case 5: loopback reconnect test with virtio 1.0 mergeable path and server m
8. Relaunch virtio-user and send packets::
./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,mrg_rxbuf=1,in_order=0 \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,mrg_rxbuf=0,in_order=1 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
>start tx_first 32
@@ -297,8 +297,8 @@ Test Case 5: loopback reconnect test with virtio 1.0 mergeable path and server m
testpmd>stop
-Test Case 6: loopback reconnect test with virtio 1.0 inorder mergeable path and server mode
-===========================================================================================
+Test Case 6: loopback reconnect test with split ring non-mergeable path and server mode
+=======================================================================================
1. launch vhost as client mode with 2 queues::
@@ -311,7 +311,7 @@ Test Case 6: loopback reconnect test with virtio 1.0 inorder mergeable path and
2. Launch virtio-user as server mode with 2 queues::
./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,mrg_rxbuf=1,in_order=1 \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,mrg_rxbuf=0,in_order=0 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
>start tx_first 32
@@ -346,7 +346,7 @@ Test Case 6: loopback reconnect test with virtio 1.0 inorder mergeable path and
8. Relaunch virtio-user and send packets::
./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,mrg_rxbuf=1,in_order=1\
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,mrg_rxbuf=0,in_order=0 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
>start tx_first 32
@@ -369,8 +369,8 @@ Test Case 6: loopback reconnect test with virtio 1.0 inorder mergeable path and
testpmd>stop
-Test Case 7: loopback reconnect test with virtio 1.0 inorder no-mergeable path and server mode
-==============================================================================================
+Test Case 7: loopback reconnect test with split ring vector_rx path and server mode
+===================================================================================
1. launch vhost as client mode with 2 queues::
@@ -383,8 +383,8 @@ Test Case 7: loopback reconnect test with virtio 1.0 inorder no-mergeable path a
2. Launch virtio-user as server mode with 2 queues::
./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,mrg_rxbuf=0,in_order=1 \
- -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,mrg_rxbuf=0,in_order=0 \
+ -- -i --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
>start tx_first 32
@@ -418,8 +418,8 @@ Test Case 7: loopback reconnect test with virtio 1.0 inorder no-mergeable path a
8. Relaunch virtio-user and send packets::
./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,mrg_rxbuf=0,in_order=1 \
- -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,mrg_rxbuf=0,in_order=0 \
+ -- -i --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
>start tx_first 32
@@ -441,8 +441,8 @@ Test Case 7: loopback reconnect test with virtio 1.0 inorder no-mergeable path a
testpmd>stop
-Test Case 8: loopback reconnect test with virtio 1.0 normal path and server mode
-================================================================================
+Test Case 8: loopback reconnect test with packed ring mergeable path and server mode
+===================================================================================
1. launch vhost as client mode with 2 queues::
@@ -455,7 +455,7 @@ Test Case 8: loopback reconnect test with virtio 1.0 normal path and server mode
2. Launch virtio-user as server mode with 2 queues::
./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,mrg_rxbuf=0,in_order=0 \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,packed_vq=1,mrg_rxbuf=1,in_order=0 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
>start tx_first 32
@@ -490,7 +490,7 @@ Test Case 8: loopback reconnect test with virtio 1.0 normal path and server mode
8. Relaunch virtio-user and send packets::
./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,mrg_rxbuf=0,in_order=0 \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,packed_vq=1,mrg_rxbuf=1,in_order=0 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
>start tx_first 32
@@ -503,18 +503,18 @@ Test Case 8: loopback reconnect test with virtio 1.0 normal path and server mode
10. Port restart at vhost side by below command and re-calculate the average throughput::
- testpmd>stop
- testpmd>port stop 0
- testpmd>port start 0
- testpmd>start tx_first 32
- testpmd>show port stats all
+ testpmd>stop
+ testpmd>port stop 0
+ testpmd>port start 0
+ testpmd>start tx_first 32
+ testpmd>show port stats all
11. Check each RX/TX queue has packets::
- testpmd>stop
+ testpmd>stop
-Test Case 9: loopback reconnect test with virtio 1.0 vector_rx path and server mode
-===================================================================================
+Test Case 9: loopback reconnect test with packed ring non-mergeable path and server mode
+=======================================================================================
1. launch vhost as client mode with 2 queues::
@@ -527,8 +527,8 @@ Test Case 9: loopback reconnect test with virtio 1.0 vector_rx path and server m
2. Launch virtio-user as server mode with 2 queues::
./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,mrg_rxbuf=0,in_order=0 \
- -- -i --nb-cores=2 --rxq=2 --txq=2
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=0 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
>start tx_first 32
@@ -562,8 +562,8 @@ Test Case 9: loopback reconnect test with virtio 1.0 vector_rx path and server m
8. Relaunch virtio-user and send packets::
./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,mrg_rxbuf=0,in_order=0 \
- -- -i --nb-cores=2 --rxq=2 --txq=2
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=0 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
>start tx_first 32
@@ -575,12 +575,156 @@ Test Case 9: loopback reconnect test with virtio 1.0 vector_rx path and server m
10. Port restart at vhost side by below command and re-calculate the average throughput::
- testpmd>stop
- testpmd>port stop 0
- testpmd>port start 0
- testpmd>start tx_first 32
- testpmd>show port stats all
+ testpmd>stop
+ testpmd>port stop 0
+ testpmd>port start 0
+ testpmd>start tx_first 32
+ testpmd>show port stats all
+
+11. Check each RX/TX queue has packets::
+
+ testpmd>stop
+
+Test Case 10: loopback reconnect test with packed ring inorder mergeable path and server mode
+===========================================================================================
+
+1. launch vhost as client mode with 2 queues::
+
+ rm -rf vhost-net*
+ ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \
+ --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --rxq=2 --txq=2
+ >set fwd mac
+ >start
+
+2. Launch virtio-user as server mode with 2 queues::
+
+ ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,packed_vq=1,mrg_rxbuf=1,in_order=1 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
+ >set fwd mac
+ >start tx_first 32
+
+3. Quit vhost side testpmd, check the virtio-user side link status::
+
+ testpmd> show port info 0
+ #it should show "down"
+
+4. Relaunch vhost and send packets::
+
+ ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \
+ --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --rxq=2 --txq=2
+ >set fwd mac
+ >start tx_first 32
+
+5. Check the virtio-user side link status and run below command to get throughput,verify the loopback throughput is not zero::
+
+ testpmd> show port info 0
+ #it should show up"
+ testpmd>show port stats all
+
+6. Check each RX/TX queue has packets::
+
+ testpmd>stop
+
+7. Quit virtio-user side testpmd, check the vhost side link status::
+
+ testpmd> show port info 0
+ #it should show "down"
+
+8. Relaunch virtio-user and send packets::
+
+ ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,packed_vq=1,mrg_rxbuf=1,in_order=1 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
+ >set fwd mac
+ >start tx_first 32
+
+9. Check the vhost side link status and run below command to get throughput, verify the loopback throughput is not zero::
+
+ testpmd> show port info 0
+ #it should show up"
+ testpmd>show port stats all
+
+10. Port restart at vhost side by below command and re-calculate the average throughput::
+
+ testpmd>stop
+ testpmd>port stop 0
+ testpmd>port start 0
+ testpmd>start tx_first 32
+ testpmd>show port stats all
+
+11. Check each RX/TX queue has packets::
+
+ testpmd>stop
+
+Test Case 11: loopback reconnect test with packed ring inorder non-mergeable path and server mode
+===============================================================================================
+
+1. launch vhost as client mode with 2 queues::
+
+ rm -rf vhost-net*
+ ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \
+ --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --rxq=2 --txq=2
+ >set fwd mac
+ >start
+
+2. Launch virtio-user as server mode with 2 queues::
+
+ ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=1 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
+ >set fwd mac
+ >start tx_first 32
+
+3. Quit vhost side testpmd, check the virtio-user side link status::
+
+ testpmd> show port info 0
+ #it should show "down"
+
+4. Relaunch vhost and send packets::
+
+ ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \
+ --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --rxq=2 --txq=2
+ >set fwd mac
+ >start tx_first 32
+
+5. Check the virtio-user side link status and run below command to get throughput,verify the loopback throughput is not zero::
+
+ testpmd> show port info 0
+ #it should show up"
+ testpmd>show port stats all
+
+6. Check each RX/TX queue has packets::
+
+ testpmd>stop
+
+7. Quit virtio-user side testpmd, check the vhost side link status::
+
+ testpmd> show port info 0
+ #it should show "down"
+
+8. Relaunch virtio-user and send packets::
+
+ ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=1 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
+ >set fwd mac
+ >start tx_first 32
+
+9. Check the vhost side link status and run below command to get throughput, verify the loopback throughput is not zero::
+
+ testpmd> show port info 0
+ #it should show up"
+ testpmd>show port stats all
+
+10. Port restart at vhost side by below command and re-calculate the average throughput::
+
+ testpmd>stop
+ testpmd>port stop 0
+ testpmd>port start 0
+ testpmd>start tx_first 32
+ testpmd>show port stats all
11. Check each RX/TX queue has packets::
- testpmd>stop
\ No newline at end of file
+ testpmd>stop
\ No newline at end of file
--
2.17.1
next reply other threads:[~2020-02-24 2:59 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-23 19:54 Yinan [this message]
2020-02-25 1:27 ` Tu, Lijuan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200223195426.65978-1-yinan.wang@intel.com \
--to=yinan.wang@intel.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).