From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from dpdk.org (dpdk.org [92.243.14.124]) by inbox.dpdk.org (Postfix) with ESMTP id B1C52A0524; Mon, 24 Feb 2020 04:05:47 +0100 (CET) Received: from [92.243.14.124] (localhost [127.0.0.1]) by dpdk.org (Postfix) with ESMTP id 7998E1BF86; Mon, 24 Feb 2020 04:05:47 +0100 (CET) Received: from mga02.intel.com (mga02.intel.com [134.134.136.20]) by dpdk.org (Postfix) with ESMTP id 1E8642C39 for ; Mon, 24 Feb 2020 04:05:44 +0100 (CET) X-Amp-Result: SKIPPED(no attachment in message) X-Amp-File-Uploaded: False Received: from orsmga001.jf.intel.com ([10.7.209.18]) by orsmga101.jf.intel.com with ESMTP/TLS/DHE-RSA-AES256-GCM-SHA384; 23 Feb 2020 19:05:44 -0800 X-ExtLoop1: 1 X-IronPort-AV: E=Sophos;i="5.70,478,1574150400"; d="scan'208";a="316620599" Received: from dpdk-yinan-purley.sh.intel.com ([10.67.117.227]) by orsmga001.jf.intel.com with ESMTP; 23 Feb 2020 19:05:42 -0800 From: Yinan To: dts@dpdk.org Cc: Wang Yinan Date: Sun, 23 Feb 2020 20:00:18 +0000 Message-Id: <20200223200018.66088-1-yinan.wang@intel.com> X-Mailer: git-send-email 2.17.1 Subject: [dts] [PATCH v1] test_plans: move cases to loopback_virtio_user_server_mode_test_plan.rst X-BeenThere: dts@dpdk.org X-Mailman-Version: 2.1.15 Precedence: list List-Id: test suite reviews and discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: dts-bounces@dpdk.org Sender: "dts" From: Wang Yinan Signed-off-by: Wang Yinan --- ...user_packed_ring_server_mode_test_plan.rst | 348 ------------------ 1 file changed, 348 deletions(-) delete mode 100644 test_plans/loopback_virtio_user_packed_ring_server_mode_test_plan.rst diff --git a/test_plans/loopback_virtio_user_packed_ring_server_mode_test_plan.rst b/test_plans/loopback_virtio_user_packed_ring_server_mode_test_plan.rst deleted file mode 100644 index 4cbee5f..0000000 --- a/test_plans/loopback_virtio_user_packed_ring_server_mode_test_plan.rst +++ /dev/null @@ -1,348 +0,0 @@ -.. Copyright (c) <2019>, Intel Corporation - All rights reserved. - - Redistribution and use in source and binary forms, with or without - modification, are permitted provided that the following conditions - are met: - - - Redistributions of source code must retain the above copyright - notice, this list of conditions and the following disclaimer. - - - Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in - the documentation and/or other materials provided with the - distribution. - - - Neither the name of Intel Corporation nor the names of its - contributors may be used to endorse or promote products derived - from this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - (INCLUDING, BUT NOgit T LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED - OF THE POSSIBILITY OF SUCH DAMAGE. - -========================================== -Packed ring loopback server mode test plan -========================================== - -Virtio-user server mode is a feature to enable virtio-user as the server, vhost as the client, thus after vhost-user is killed then relaunched, -virtio-user can reconnect back to vhost-user again; at another hand, virtio-user also can reconnect back to vhost-user after virtio-user is killed.This feature test need cover different rx/tx paths with virtio 1.0 and virtio 1.1, includes virtio 1.0 mergeable, normal, vector_rx, inorder no-mergeable, inorder mergeable path and virtio 1.1 mergeable, non-mergeable, inorder mergeable and inorder non-mergeable path. - - -Test Case 1: Basic test for virtio-user server mode, launch virtio-user first -============================================================================= - -1. Launch virtio-user as server mode:: - - ./testpmd -l 1-2 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \ - --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/tmp/sock0,server=1,queues=1,packed_vq=1 -- -i --rxq=1 --txq=1 --no-numa - >set fwd mac - >start - -2. Launch vhost as client mode:: - - ./testpmd -l 3-4 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \ - --vdev 'net_vhost0,iface=/tmp/sock0,client=1,queues=1' -- -i --rxq=1 --txq=1 --nb-cores=1 - >set fwd mac - >start tx_first 32 - -3. Run below command to get throughput,verify the loopback throughput is not zero:: - - testpmd>show port stats all - -Test Case 2: loopback reconnect test with virtio 1.1 mergeable path and server mode -=================================================================================== - -1. launch vhost as client mode with 2 queues:: - - rm -rf vhost-net* - ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \ - --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --rxq=2 --txq=2 - >set fwd mac - >start - -2. Launch virtio-user as server mode with 2 queues:: - - ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \ - --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,packed_vq=1,mrg_rxbuf=1,in_order=0 \ - -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2 - >set fwd mac - >start tx_first 32 - -3. Quit vhost side testpmd, check the virtio-user side link status:: - - testpmd> show port info 0 - #it should show "down" - -4. Relaunch vhost and send packets:: - - ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \ - --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --rxq=2 --txq=2 - >set fwd mac - >start tx_first 32 - -5. Check the virtio-user side link status and run below command to get throughput,verify the loopback throughput is not zero:: - - testpmd> show port info 0 - #it should show up" - testpmd>show port stats all - -6. Check each RX/TX queue has packets:: - - testpmd>stop - -7. Quit virtio-user side testpmd, check the vhost side link status:: - - testpmd> show port info 0 - #it should show "down" - -8. Relaunch virtio-user and send packets:: - - ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \ - --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,packed_vq=1,mrg_rxbuf=1,in_order=0 \ - -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2 - >set fwd mac - >start tx_first 32 - -9. Check the vhost side link status and run below command to get throughput, verify the loopback throughput is not zero:: - - testpmd> show port info 0 - #it should show up" - testpmd>show port stats all - -10. Port restart at vhost side by below command and re-calculate the average throughput:: - - testpmd>stop - testpmd>port stop 0 - testpmd>port start 0 - testpmd>start tx_first 32 - testpmd>show port stats all - -11. Check each RX/TX queue has packets:: - - testpmd>stop - -Test Case 3: loopback reconnect test with virtio 1.1 non-mergeable path and server mode -======================================================================================= - -1. launch vhost as client mode with 2 queues:: - - rm -rf vhost-net* - ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \ - --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --rxq=2 --txq=2 - >set fwd mac - >start - -2. Launch virtio-user as server mode with 2 queues:: - - ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \ - --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=0 \ - -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2 - >set fwd mac - >start tx_first 32 - -3. Quit vhost side testpmd, check the virtio-user side link status:: - - testpmd> show port info 0 - #it should show "down" - -4. Relaunch vhost and send packets:: - - ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \ - --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --rxq=2 --txq=2 - >set fwd mac - >start tx_first 32 - -5. Check the virtio-user side link status and run below command to get throughput,verify the loopback throughput is not zero:: - - testpmd> show port info 0 - #it should show up" - testpmd>show port stats all - -6. Check each RX/TX queue has packets:: - - testpmd>stop - -7. Quit virtio-user side testpmd, check the vhost side link status:: - - testpmd> show port info 0 - #it should show "down" - -8. Relaunch virtio-user and send packets:: - - ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \ - --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=0 \ - -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2 - >set fwd mac - >start tx_first 32 - -9. Check the vhost side link status and run below command to get throughput, verify the loopback throughput is not zero:: - - testpmd> show port info 0 - #it should show up" - testpmd>show port stats all - -10. Port restart at vhost side by below command and re-calculate the average throughput:: - - testpmd>stop - testpmd>port stop 0 - testpmd>port start 0 - testpmd>start tx_first 32 - testpmd>show port stats all - -11. Check each RX/TX queue has packets:: - - testpmd>stop - -Test Case 4: loopback reconnect test with virtio 1.1 inorder mergeable path and server mode -=========================================================================================== - -1. launch vhost as client mode with 2 queues:: - - rm -rf vhost-net* - ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \ - --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --rxq=2 --txq=2 - >set fwd mac - >start - -2. Launch virtio-user as server mode with 2 queues:: - - ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \ - --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,packed_vq=1,mrg_rxbuf=1,in_order=1 \ - -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2 - >set fwd mac - >start tx_first 32 - -3. Quit vhost side testpmd, check the virtio-user side link status:: - - testpmd> show port info 0 - #it should show "down" - -4. Relaunch vhost and send packets:: - - ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \ - --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --rxq=2 --txq=2 - >set fwd mac - >start tx_first 32 - -5. Check the virtio-user side link status and run below command to get throughput,verify the loopback throughput is not zero:: - - testpmd> show port info 0 - #it should show up" - testpmd>show port stats all - -6. Check each RX/TX queue has packets:: - - testpmd>stop - -7. Quit virtio-user side testpmd, check the vhost side link status:: - - testpmd> show port info 0 - #it should show "down" - -8. Relaunch virtio-user and send packets:: - - ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \ - --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,packed_vq=1,mrg_rxbuf=1,in_order=1 \ - -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2 - >set fwd mac - >start tx_first 32 - -9. Check the vhost side link status and run below command to get throughput, verify the loopback throughput is not zero:: - - testpmd> show port info 0 - #it should show up" - testpmd>show port stats all - -10. Port restart at vhost side by below command and re-calculate the average throughput:: - - testpmd>stop - testpmd>port stop 0 - testpmd>port start 0 - testpmd>start tx_first 32 - testpmd>show port stats all - -11. Check each RX/TX queue has packets:: - - testpmd>stop - -Test Case 5: loopback reconnect test with virtio 1.1 inorder non-mergeable path and server mode -=============================================================================================== - -1. launch vhost as client mode with 2 queues:: - - rm -rf vhost-net* - ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \ - --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --rxq=2 --txq=2 - >set fwd mac - >start - -2. Launch virtio-user as server mode with 2 queues:: - - ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \ - --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=1 \ - -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2 - >set fwd mac - >start tx_first 32 - -3. Quit vhost side testpmd, check the virtio-user side link status:: - - testpmd> show port info 0 - #it should show "down" - -4. Relaunch vhost and send packets:: - - ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \ - --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --rxq=2 --txq=2 - >set fwd mac - >start tx_first 32 - -5. Check the virtio-user side link status and run below command to get throughput,verify the loopback throughput is not zero:: - - testpmd> show port info 0 - #it should show up" - testpmd>show port stats all - -6. Check each RX/TX queue has packets:: - - testpmd>stop - -7. Quit virtio-user side testpmd, check the vhost side link status:: - - testpmd> show port info 0 - #it should show "down" - -8. Relaunch virtio-user and send packets:: - - ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \ - --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=1 \ - -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2 - >set fwd mac - >start tx_first 32 - -9. Check the vhost side link status and run below command to get throughput, verify the loopback throughput is not zero:: - - testpmd> show port info 0 - #it should show up" - testpmd>show port stats all - -10. Port restart at vhost side by below command and re-calculate the average throughput:: - - testpmd>stop - testpmd>port stop 0 - testpmd>port start 0 - testpmd>start tx_first 32 - testpmd>show port stats all - -11. Check each RX/TX queue has packets:: - - testpmd>stop -- 2.17.1