test suite reviews and discussions
 help / color / mirror / Atom feed
* [dts] [PATCH v2] test_plans: add per-patch performance test for vm2vm_virtio_net
@ 2020-03-09 17:45 Yinan
  2020-03-13  6:37 ` Tu, Lijuan
  0 siblings, 1 reply; 2+ messages in thread
From: Yinan @ 2020-03-09 17:45 UTC (permalink / raw)
  To: dts; +Cc: Wang Yinan

From: Wang Yinan <yinan.wang@intel.com>

Signed-off-by: Wang Yinan <yinan.wang@intel.com>
---
 .../perf_vm2vm_virtio_net_perf_test_plan.rst  | 251 ++++++++++++++++++
 1 file changed, 251 insertions(+)
 create mode 100644 test_plans/perf_vm2vm_virtio_net_perf_test_plan.rst

diff --git a/test_plans/perf_vm2vm_virtio_net_perf_test_plan.rst b/test_plans/perf_vm2vm_virtio_net_perf_test_plan.rst
new file mode 100644
index 0000000..60e7abd
--- /dev/null
+++ b/test_plans/perf_vm2vm_virtio_net_perf_test_plan.rst
@@ -0,0 +1,251 @@
+.. Copyright (c) <2019>, Intel Corporation
+   All rights reserved.
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+
+   - Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+
+   - Redistributions in binary forim must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in
+     the documentation and/or other materials provided with the
+     distribution.
+
+   - Neither the name of Intel Corporation nor the names of its
+     contributors may be used to endorse or promote products derived
+     from this software without specific prior written permission.
+
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+   FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+   COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+   INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+   SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+   STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+   OF THE POSSIBILITY OF SUCH DAMAGE.
+
+==========================================
+perf vm2vm vhost-user/virtio-net test plan
+==========================================
+
+Description
+===========
+
+This test plan test vhost tx offload (TSO) function by verifing the TSO/cksum in the TCP/IP
+stack enabled environment with vm2vm split ring and packed ring vhost-user/virtio-net mergeable
+path. For packed virtqueue virtio-net test, need qemu version > 4.2.0 and VM kernel version > v5.1.
+
+Test flow
+=========
+
+Virtio-net <-> Vhost <-> Testpmd <-> Vhost <-> Virtio-net
+
+Test Case 1: Perf VM2VM split ring vhost-user/virtio-net test with tcp traffic
+==============================================================================
+
+1. Launch the Vhost sample by below commands::
+
+    rm -rf vhost-net*
+    ./testpmd -l 2-4 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1' \
+    --vdev 'net_vhost1,iface=vhost-net1,queues=1'  -- -i --nb-cores=2 --txd=1024 --rxd=1024
+    testpmd>start
+
+2. Launch VM1 and VM2::
+
+    taskset -c 13 qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
+    -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
+    -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img  \
+    -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+    -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+    -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+    -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
+    -chardev socket,id=char0,path=./vhost-net0 \
+    -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
+    -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on -vnc :10
+
+    taskset -c 15 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
+    -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
+    -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16-2.img  \
+    -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+    -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+    -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+    -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
+    -chardev socket,id=char0,path=./vhost-net1 \
+    -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
+    -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on -vnc :12
+
+3. On VM1, set virtio device IP and run arp protocal::
+
+    ifconfig ens5 1.1.1.2
+    arp -s 1.1.1.8 52:54:00:00:00:02
+
+4. On VM2, set virtio device IP and run arp protocal::
+
+    ifconfig ens5 1.1.1.8
+    arp -s 1.1.1.2 52:54:00:00:00:01
+
+5. Check the iperf performance between two VMs by below commands::
+
+    Under VM1, run: `iperf -s -i 1`
+    Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
+
+6. Check iperf throughput can get expected data.
+
+Test Case 2: Perf VM2VM split ring vhost-user/virtio-net dequeue zero-copy test with tcp traffic
+================================================================================================
+
+1. Launch the Vhost sample by below commands::
+
+    rm -rf vhost-net*
+    ./testpmd -l 2-4 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1,dequeue-zero-copy=1' \
+    --vdev 'net_vhost1,iface=vhost-net1,queues=1,dequeue-zero-copy=1'  -- -i --nb-cores=2 --txd=1024 --rxd=1024
+    testpmd>start
+
+2. Launch VM1 and VM2::
+
+    taskset -c 13 qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
+    -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
+    -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img  \
+    -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+    -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+    -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+    -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
+    -chardev socket,id=char0,path=./vhost-net0 \
+    -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
+    -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on -vnc :10
+
+    taskset -c 15 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
+    -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
+    -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16-2.img  \
+    -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+    -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+    -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+    -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
+    -chardev socket,id=char0,path=./vhost-net1 \
+    -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
+    -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on -vnc :12
+
+3. On VM1, set virtio device IP and run arp protocal::
+
+    ifconfig ens5 1.1.1.2
+    arp -s 1.1.1.8 52:54:00:00:00:02
+
+4. On VM2, set virtio device IP and run arp protocal::
+
+    ifconfig ens5 1.1.1.8
+    arp -s 1.1.1.2 52:54:00:00:00:01
+
+5. Check the iperf performance between two VMs by below commands::
+
+    Under VM1, run: `iperf -s -i 1`
+    Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
+
+6. Check iperf throughput can get expected data.
+
+Test Case 3: Perf VM2VM packed ring vhost-user/virtio-net test with tcp traffic
+===============================================================================
+
+1. Launch the Vhost sample by below commands::
+
+    rm -rf vhost-net*
+    ./testpmd -l 2-4 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1' \
+    --vdev 'net_vhost1,iface=vhost-net1,queues=1'  -- -i --nb-cores=2 --txd=1024 --rxd=1024
+    testpmd>start
+
+2. Launch VM1 and VM2::
+
+    taskset -c 13 qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
+    -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
+    -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img  \
+    -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+    -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+    -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+    -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
+    -chardev socket,id=char0,path=./vhost-net0 \
+    -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
+    -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :10
+
+    taskset -c 15 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
+    -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
+    -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16-2.img  \
+    -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+    -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+    -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+    -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
+    -chardev socket,id=char0,path=./vhost-net1 \
+    -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
+    -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :12
+
+3. On VM1, set virtio device IP and run arp protocal::
+
+    ifconfig ens3 1.1.1.2
+    arp -s 1.1.1.8 52:54:00:00:00:02
+
+4. On VM2, set virtio device IP and run arp protocal::
+
+    ifconfig ens3 1.1.1.8
+    arp -s 1.1.1.2 52:54:00:00:00:01
+
+5. Check the iperf performance between two VMs by below commands::
+
+    Under VM1, run: `iperf -s -i 1`
+    Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
+
+6. Check iperf throughput can get expected data.
+
+Test Case 4: Perf VM2VM packed ring vhost-user/virtio-net dequeue zero-copy test with tcp traffic
+=================================================================================================
+
+1. Launch the Vhost sample by below commands::
+
+    rm -rf vhost-net*
+    ./testpmd -l 2-4 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1,dequeue-zero-copy=1' \
+    --vdev 'net_vhost1,iface=vhost-net1,queues=1,dequeue-zero-copy=1'  -- -i --nb-cores=2 --txd=1024 --rxd=1024
+    testpmd>start
+
+2. Launch VM1 and VM2::
+
+    taskset -c 13 qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
+    -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
+    -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img  \
+    -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+    -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+    -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+    -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
+    -chardev socket,id=char0,path=./vhost-net0 \
+    -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
+    -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :10
+
+    taskset -c 15 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
+    -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
+    -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16-2.img  \
+    -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+    -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+    -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+    -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
+    -chardev socket,id=char0,path=./vhost-net1 \
+    -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
+    -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :12
+
+3. On VM1, set virtio device IP and run arp protocal::
+
+    ifconfig ens3 1.1.1.2
+    arp -s 1.1.1.8 52:54:00:00:00:02
+
+4. On VM2, set virtio device IP and run arp protocal::
+
+    ifconfig ens3 1.1.1.8
+    arp -s 1.1.1.2 52:54:00:00:00:01
+
+5. Check the iperf performance between two VMs by below commands::
+
+    Under VM1, run: `iperf -s -i 1`
+    Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
+
+6. Check iperf throughput can get expected data.
\ No newline at end of file
-- 
2.17.1


^ permalink raw reply	[flat|nested] 2+ messages in thread
end of thread, other threads:[~2020-03-13  6:37 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-03-09 17:45 [dts] [PATCH v2] test_plans: add per-patch performance test for vm2vm_virtio_net Yinan
2020-03-13  6:37 ` Tu, Lijuan

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).