From: Yinan <yinan.wang@intel.com>
To: dts@dpdk.org
Cc: Wang Yinan <yinan.wang@intel.com>
Subject: [dts] [PATCH v1] test_plans: add vhost_xstats test for all virtio path
Date: Tue, 10 Mar 2020 17:56:19 +0000 [thread overview]
Message-ID: <20200310175619.66148-1-yinan.wang@intel.com> (raw)
From: Wang Yinan <yinan.wang@intel.com>
Signed-off-by: Wang Yinan <yinan.wang@intel.com>
---
test_plans/vhost_xstats_test_plan.rst | 307 ++++++++++++++++++++++++++
1 file changed, 307 insertions(+)
create mode 100644 test_plans/vhost_xstats_test_plan.rst
diff --git a/test_plans/vhost_xstats_test_plan.rst b/test_plans/vhost_xstats_test_plan.rst
new file mode 100644
index 0000000..0baee7a
--- /dev/null
+++ b/test_plans/vhost_xstats_test_plan.rst
@@ -0,0 +1,307 @@
+.. Copyright (c) <2019>, Intel Corporation
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in
+ the documentation and/or other materials provided with the
+ distribution.
+
+ - Neither the name of Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived
+ from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ OF THE POSSIBILITY OF SUCH DAMAGE.
+
+========================================
+vhost PMD Xstats Tests restart test plan
+========================================
+
+Description
+===========
+
+This test plan will cover the basic vhost pmd xstats test with each path of split ring
+and packed ring, includes split virtqueue in-order mergeable, in-order non-mergeable,
+mergeable, non-mergeable, vector_rx path test and packed virtqueue in-order mergeable,
+in-order non-mergeable, mergeable, non-mergeable path, also cover a stability case.
+Note IXIA or Scapy packes includes 4 CRC bytes and vhost side will remove the CRC when receive packests.
+
+Test flow
+=========
+
+TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
+
+Test Case 1: xstats test with packed ring mergeable path
+========================================================
+
+1. Bind one port to vfio-pci, then launch vhost by below command::
+
+ rm -rf vhost-net*
+ ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
+ --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -- -i --nb-cores=2 --rxq=2 --txq=2
+ testpmd>set fwd mac
+ testpmd>start
+
+2. Launch virtio-user by below command::
+
+ ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
+ --legacy-mem --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,packed_vq=1,mrg_rxbuf=1,in_order=0 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
+ >set fwd mac
+ >start
+
+3. Let TG generate send 10000 packets for each packet sizes(64,128,255, 512, 1024, 1523).
+
+4. On host run "show port xstats 1", and check the statistic type and number is correct.
+For example: send 1000 packets with 1028B size(includes 4 CRC bytes), the statistic number of tx_size_1024_to_1522_packets and rx_size_1024_to_1522_packets should both 1000.
+
+5. Let TG generate send 10000 packets for each different types (broadcast, multicast, ucast).
+
+6. On host run "show port xstats 1", and check the statistic type and number is correct.
+For example: send 1000 packets with ucast type, the number of tx_unicast_packets and rx_unicast_packets should both 1000.
+
+Test Case 2: xstats test with packed ring non-mergeable path
+============================================================
+
+1. Bind one port to vfio-pci, then launch vhost by below command::
+
+ rm -rf vhost-net*
+ ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
+ --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -- -i --nb-cores=2 --rxq=2 --txq=2
+ testpmd>set fwd mac
+ testpmd>start
+
+2. Launch virtio-user by below command::
+
+ ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
+ --legacy-mem --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=0 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
+ >set fwd mac
+ >start
+
+3. Let TG generate send 10000 packets for each packet sizes(64,128,255, 512, 1024, 1523).
+
+4. On host run "show port xstats 1", and check the statistic type and number is correct.
+
+5. Let TG generate send 10000 packets for each different types (broadcast, multicast, ucast).
+
+6. On host run "show port xstats 1", and check the statistic type and number is correct.
+
+Test Case 3: xstats stability test with split ring inorder mergeable path
+=========================================================================
+
+1. Bind one port to vfio-pci, then launch vhost by below command::
+
+ rm -rf vhost-net*
+ ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
+ --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -- -i --nb-cores=2 --rxq=2 --txq=2
+ testpmd>set fwd mac
+ testpmd>start
+
+2. Launch virtio-user by below command::
+
+ ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
+ --legacy-mem --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,in_order=1,mrg_rxbuf=1 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
+ >set fwd mac
+ >start
+
+3. Let TG generate send 10000 packets for each packet sizes(64,128,255, 512, 1024, 1523).
+
+4. On host run "show port xstats 1", and check the statistic type and number is correct.
+
+5. Let TG generate send 10000 packets for each different types (broadcast, multicast, ucast).
+
+6. On host run "show port xstats 1", and check the statistic type and number is correct.
+
+7.Send packets for 10 minutes with low speed, check the statistic type and number is correct.
+
+Test Case 4: xstats test with split ring inorder non-mergeable path
+===================================================================
+
+1. Bind one port to vfio-pci, then launch vhost by below command::
+
+ rm -rf vhost-net*
+ ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
+ --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -- -i --nb-cores=2 --rxq=2 --txq=2
+ testpmd>set fwd mac
+ testpmd>start
+
+2. Launch virtio-user by below command::
+
+ ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
+ --legacy-mem --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,in_order=1,mrg_rxbuf=0 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
+ >set fwd mac
+ >start
+
+3. Let TG generate send 10000 packets for each packet sizes(64,128,255, 512, 1024, 1523).
+
+4. On host run "show port xstats 1", and check the statistic type and number is correct.
+
+5. Let TG generate send 10000 packets for each different types (broadcast, multicast, ucast).
+
+6. On host run "show port xstats 1", and check the statistic type and number is correct.
+
+Test Case 5: xstats test with split ring mergeable path
+=======================================================
+
+1. Bind one port to vfio-pci, then launch vhost by below command::
+
+ rm -rf vhost-net*
+ ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
+ --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -- -i --nb-cores=2 --rxq=2 --txq=2
+ testpmd>set fwd mac
+ testpmd>start
+
+2. Launch virtio-user by below command::
+
+ ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
+ --legacy-mem --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,in_order=0,mrg_rxbuf=1 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
+ >set fwd mac
+ >start
+
+3. Let TG generate send 10000 packets for each packet sizes(64,128,255, 512, 1024, 1523).
+
+4. On host run "show port xstats 1", and check the statistic type and number is correct.
+
+5. Let TG generate send 10000 packets for each different types (broadcast, multicast, ucast).
+
+6. On host run "show port xstats 1", and check the statistic type and number is correct.
+
+Test Case 6: xstats test with split ring non-mergeable path
+===========================================================
+
+1. Bind one port to vfio-pci, then launch vhost by below command::
+
+ rm -rf vhost-net*
+ ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
+ --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -- -i --nb-cores=2 --rxq=2 --txq=2
+ testpmd>set fwd mac
+ testpmd>start
+
+2. Launch virtio-user by below command::
+
+ ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
+ --legacy-mem --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,in_order=0,mrg_rxbuf=0 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
+ >set fwd mac
+ >start
+
+3. Let TG generate send 10000 packets for each packet sizes(64,128,255, 512, 1024, 1523).
+
+4. On host run "show port xstats 1", and check the statistic type and number is correct.
+
+5. Let TG generate send 10000 packets for each different types (broadcast, multicast, ucast).
+
+6. On host run "show port xstats 1", and check the statistic type and number is correct.
+
+Test Case 7: xstats test with split ring vector_rx path
+=======================================================
+
+1. Bind one port to vfio-pci, then launch vhost by below command::
+
+ rm -rf vhost-net*
+ ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
+ --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -- -i --nb-cores=2 --rxq=2 --txq=2
+ testpmd>set fwd mac
+ testpmd>start
+
+2. Launch virtio-user by below command::
+
+ ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
+ --legacy-mem --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,in_order=0,mrg_rxbuf=0 \
+ -- -i --tx-offloads=0x0 --rss-ip --nb-cores=2 --rxq=2 --txq=2
+ >set fwd mac
+ >start
+
+3. Let TG generate send 10000 packets for each packet sizes(64,128,255, 512, 1024, 1523).
+
+4. On host run "show port xstats 1", and check the statistic type and number is correct.
+
+5. Let TG generate send 10000 packets for each different types (broadcast, multicast, ucast).
+
+6. On host run "show port xstats 1", and check the statistic type and number is correct.
+
+Test Case 8: xstats test with packed ring inorder mergeable path
+================================================================
+
+1. Bind one port to vfio-pci, then launch vhost by below command::
+
+ rm -rf vhost-net*
+ ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
+ --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -- -i --nb-cores=2 --rxq=2 --txq=2
+ testpmd>set fwd mac
+ testpmd>start
+
+2. Launch virtio-user by below command::
+
+ ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
+ --legacy-mem --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,packed_vq=1,mrg_rxbuf=1,in_order=1 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
+ >set fwd mac
+ >start
+
+3. Let TG generate send 10000 packets for each packet sizes(64,128,255, 512, 1024, 1523).
+
+4. On host run "show port xstats 1", and check the statistic type and number is correct.
+
+5. Let TG generate send 10000 packets for each different types (broadcast, multicast, ucast).
+
+6. On host run "show port xstats 1", and check the statistic type and number is correct.
+
+7.Send packets for 10 minutes with low speed, check the statistic type and number is correct.
+
+Test Case 9: xstats test with packed ring inorder non-mergeable path
+====================================================================
+
+1. Bind one port to vfio-pci, then launch vhost by below command::
+
+ rm -rf vhost-net*
+ ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
+ --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -- -i --nb-cores=2 --rxq=2 --txq=2
+ testpmd>set fwd mac
+ testpmd>start
+
+2. Launch virtio-user by below command::
+
+ ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
+ --legacy-mem --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=1 \
+ -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
+ >set fwd mac
+ >start
+
+3. Let TG generate send 10000 packets for each packet sizes(64,128,255, 512, 1024, 1523).
+
+4. On host run "show port xstats 1", and check the statistic type and number is correct.
+
+5. Let TG generate send 10000 packets for each different types (broadcast, multicast, ucast).
+
+6. On host run "show port xstats 1", and check the statistic type and number is correct.
\ No newline at end of file
--
2.17.1
next reply other threads:[~2020-03-11 1:02 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-10 17:56 Yinan [this message]
2020-03-13 6:51 ` Tu, Lijuan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200310175619.66148-1-yinan.wang@intel.com \
--to=yinan.wang@intel.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).